diff --git a/gcc/ChangeLog b/gcc/ChangeLog
index 8092033c9ba066ab220ddff60efb3f29defd5b41..b65a3523b32d9e94f24e40fd6a0399ed50a1c529 100644
--- a/gcc/ChangeLog
+++ b/gcc/ChangeLog
@@ -1,3 +1,18 @@
+2000-12-08 Joseph S. Myers <jsm28@cam.ac.uk>
+
+ * configure.in: Don't define INSTALL_INFO.
+ * configure: Regenerate.
+ * Makefile.in (INSTALL_INFO): Remove.
+ (info): Depend on info files in source directory.
+ (cpp.info, gcc.info, c-tree.info): Build info files in source
+ directory.
+ (distclean): Don't remove info files.
+ (maintainer-clean): Remove info files from source directory.
+ (install-normal): Depend on install-info.
+ (install-info): Install info files from source directory, if they
+ exist.
+ * texinfo.tex: Update to version 2000-11-09.08 from ftp.gnu.org.
+
2000-12-08 Alexandre Oliva <aoliva@redhat.com>
* lcm.c (optimize_mode_switching): Check whether an insn is a NOTE
diff --git a/gcc/Makefile.in b/gcc/Makefile.in
index b84f453c961c8f96eb3380759fd274e4f7e28d62..89479eb819d1ae0c05e0d3c386d135e1541292a4 100644
--- a/gcc/Makefile.in
+++ b/gcc/Makefile.in
@@ -466,7 +466,6 @@ INSTALL_HEADERS=install-headers
# Control whether Info documentation is built and installed.
BUILD_INFO = @BUILD_INFO@
-INSTALL_INFO = @INSTALL_INFO@
# Additional directories of header files to run fixincludes on.
# These should be directories searched automatically by default
@@ -2161,19 +2160,19 @@ stmp-fixproto: fixhdr.ready fixproto stmp-int-hdrs
# Remake the info files.
doc: $(BUILD_INFO) gccbug
-info: cpp.info gcc.info lang.info c-tree.info
+info: $(srcdir)/cpp.info $(srcdir)/gcc.info lang.info $(srcdir)/c-tree.info
-cpp.info: $(srcdir)/cpp.texi
- $(MAKEINFO) $(MAKEINFOFLAGS) -I$(srcdir) -o cpp.info $(srcdir)/cpp.texi
+$(srcdir)/cpp.info: $(srcdir)/cpp.texi
+ cd $(srcdir) && $(MAKEINFO) $(MAKEINFOFLAGS) -o cpp.info cpp.texi
-gcc.info: $(srcdir)/gcc.texi $(srcdir)/extend.texi $(srcdir)/install.texi \
+$(srcdir)/gcc.info: $(srcdir)/gcc.texi $(srcdir)/extend.texi $(srcdir)/install.texi \
$(srcdir)/invoke.texi $(srcdir)/md.texi $(srcdir)/rtl.texi \
$(srcdir)/tm.texi $(srcdir)/gcov.texi
- $(MAKEINFO) $(MAKEINFOFLAGS) -I$(srcdir) -o gcc.info $(srcdir)/gcc.texi
+ cd $(srcdir) && $(MAKEINFO) $(MAKEINFOFLAGS) -o gcc.info gcc.texi
-c-tree.info: $(srcdir)/c-tree.texi
- $(MAKEINFO) $(MAKEINFOFLAGS) -I$(srcdir) -o c-tree.info \
- $(srcdir)/c-tree.texi
+$(srcdir)/c-tree.info: $(srcdir)/c-tree.texi
+ cd $(srcdir) && $(MAKEINFO) $(MAKEINFOFLAGS) -o c-tree.info \
+ c-tree.texi
dvi: gcc.dvi cpp.dvi lang.dvi
@@ -2287,7 +2286,6 @@ distclean: clean $(INTL_DISTCLEAN) lang.distclean
-rm -f intl/libintl.h libintl.h
-rm -f cxxmain.c splay-tree.c obstack.c alloca.c hashtab.c
-rm -f mklibgcc libgcc.map gccbug .gdbinit configargs.h
- -rm -f c-tree.info c-tree.info-1 c-tree.info-2 c-tree.info-3
-rm -f gcov.pod
-rm -f fixinc/Makefile
-rmdir cp f java objc fixinc intl po 2>/dev/null
@@ -2321,8 +2319,9 @@ maintainer-clean:
$(MAKE) INTL_DISTCLEAN= INTL_CLEAN= INTL_MOSTLYCLEAN= \
intl.maintainer-clean lang.maintainer-clean distclean
-rm -f c-parse.y c-parse.c c-parse.output TAGS
- -rm -f cpp.info* cpp.??s cpp.*aux
- -rm -f gcc.info* gcc.??s gcc.*aux
+ -rm -f cpp.??s cpp.*aux
+ -rm -f gcc.??s gcc.*aux
+ -rm -f $(srcdir)/cpp.info* $(srcdir)/gcc.info* $(srcdir)/c-tree.info*
-rm -f $(srcdir)/gcov.1
#
# Entry points `install' and `uninstall'.
@@ -2337,7 +2336,7 @@ install: $(INSTALL_TARGET) ; @true
# Install the driver last so that the window when things are
# broken is small.
install-normal: install-common $(INSTALL_HEADERS) $(INSTALL_LIBGCC) \
- $(INSTALL_CPP) install-man $(INSTALL_INFO) intl.install \
+ $(INSTALL_CPP) install-man install-info intl.install \
lang.install-normal install-driver
# Do nothing while making gcc with a cross-compiler. The person who
@@ -2494,13 +2493,18 @@ install-driver: xgcc$(exeext)
# to do the install.
install-info: doc installdirs lang.install-info
-rm -f $(infodir)/cpp.info* $(infodir)/gcc.info*
- for f in cpp.info* gcc.info*; do \
- $(INSTALL_DATA) $$f $(infodir)/$$f; \
- done
+ if [ -f $(srcdir)/gcc.info ]; then \
+ for f in $(srcdir)/cpp.info* $(srcdir)/gcc.info*; do \
+ realfile=`echo $$f | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
+ $(INSTALL_DATA) $$f $(infodir)/$$realfile; \
+ done; \
+ else true; fi
-if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \
if [ -f $(infodir)/dir ] ; then \
for f in cpp.info gcc.info; do \
- install-info --dir-file=$(infodir)/dir $(infodir)/$$f; \
+ if [ -f $(infodir)/$$f ]; then \
+ install-info --dir-file=$(infodir)/dir $(infodir)/$$f; \
+ else true; fi \
done; \
else true; fi; \
else true; fi;
diff --git a/gcc/ch/ChangeLog b/gcc/ch/ChangeLog
index 5691da59beac0339cc80c36d3abdba59f7c4ef73..bf8c073f3f5ff7fcadb674b41bd3029b60c0fffa 100644
--- a/gcc/ch/ChangeLog
+++ b/gcc/ch/ChangeLog
@@ -1,3 +1,10 @@
+2000-12-08 Joseph S. Myers <jsm28@cam.ac.uk>
+
+ * Make-lang.in (CHILL.info): Depend on info files in source
+ directory.
+ (ch/chill.info): Build info files in source directory.
+ (CHILL.install-info): Install info files from source directory.
+
2000-12-07 Zack Weinberg <zack@wolery.stanford.edu>
* lex.c: Don't bother checking whether ISUPPER(c) before
diff --git a/gcc/ch/Make-lang.in b/gcc/ch/Make-lang.in
index 3eb22bed8329427fd3b6b312e3281f16c33f7007..6c8154f003ecd7db4a7a0dc8fa8f7a2ba3e06719 100644
--- a/gcc/ch/Make-lang.in
+++ b/gcc/ch/Make-lang.in
@@ -108,10 +108,10 @@ CHILL.start.encap: chill
CHILL.rest.encap:
CHILL.dvi: chill.dvi
-CHILL.info: ch/chill.info
+CHILL.info: $(srcdir)/ch/chill.info
-ch/chill.info: $(srcdir)/ch/chill.texi
- $(MAKEINFO) -I$(srcdir)/ch -o ch/chill.info $(srcdir)/ch/chill.texi
+$(srcdir)/ch/chill.info: $(srcdir)/ch/chill.texi
+ cd $(srcdir)/ch && $(MAKEINFO) -o chill.info chill.texi
chill.dvi: $(srcdir)/ch/chill.texi $(srcdir)/extend.texi $(srcdir)/invoke.texi $(srcdir)/md.texi $(srcdir)/rtl.texi $(srcdir)/tm.texi
cd ch ; \
@@ -145,7 +145,7 @@ CHILL.install-common:
# Don't delete $(infodir)/ch.info* unless there's actually new
# docs to install (in case LANGUAGES didn't contain chill earlier).
CHILL.install-info:
- -for i in ch/chill.info*; do \
+ -cd $(srcdir)/ch; for i in chill.info*; do \
rm -f $(infodir)/chill.info*; \
realfile=`echo $$i | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
$(INSTALL_DATA) $$i $(infodir)/$$realfile; \
@@ -169,7 +169,7 @@ CHILL.distclean:
CHILL.extraclean:
CHILL.maintainer-clean:
-rm -f ch/TAGS
- -rm -f ch/chill.info* ch/chill.dvi ch/chill.??s ch/chill.*aux
+ -rm -f $(srcdir)/ch/chill.info* ch/chill.dvi ch/chill.??s ch/chill.*aux
# Delete locally created file.
-rm -f ch/hash.h
#
diff --git a/gcc/configure b/gcc/configure
index bbd3de5748a0a5a9dffd3335d17540a7b449c926..6c1b197cd955a573a2ddf09047919f9e08c86ae6 100755
--- a/gcc/configure
+++ b/gcc/configure
@@ -101,7 +101,6 @@ program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
-sitefile=
srcdir=
target=NONE
verbose=
@@ -216,7 +215,6 @@ Configuration:
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
- --site-file=FILE use FILE as the site file
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
@@ -387,11 +385,6 @@ EOF
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
- -site-file | --site-file | --site-fil | --site-fi | --site-f)
- ac_prev=sitefile ;;
- -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
- sitefile="$ac_optarg" ;;
-
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
@@ -557,16 +550,12 @@ fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
- if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
- fi
+if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
fi
-else
- CONFIG_SITE="$sitefile"
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
@@ -621,7 +610,7 @@ copy=cp
# - two terminals occur directly after each other
# - the path contains an element with a dot in it
echo $ac_n "checking LIBRARY_PATH variable""... $ac_c" 1>&6
-echo "configure:625: checking LIBRARY_PATH variable" >&5
+echo "configure:614: checking LIBRARY_PATH variable" >&5
case ${LIBRARY_PATH} in
[:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
library_path_setting="contains current directory"
@@ -646,7 +635,7 @@ fi
# - two terminals occur directly after each other
# - the path contains an element with a dot in it
echo $ac_n "checking GCC_EXEC_PREFIX variable""... $ac_c" 1>&6
-echo "configure:650: checking GCC_EXEC_PREFIX variable" >&5
+echo "configure:639: checking GCC_EXEC_PREFIX variable" >&5
case ${GCC_EXEC_PREFIX} in
[:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
gcc_exec_prefix_setting="contains current directory"
@@ -762,7 +751,7 @@ fi
# Build a new-libstdc++ system (ie libstdc++-v3)
echo $ac_n "checking for libstdc++ to install""... $ac_c" 1>&6
-echo "configure:766: checking for libstdc++ to install" >&5
+echo "configure:755: checking for libstdc++ to install" >&5
# Check whether --enable-libstdcxx-v3 or --disable-libstdcxx-v3 was given.
if test "${enable_libstdcxx_v3+set}" = set; then
enableval="$enable_libstdcxx_v3"
@@ -1019,7 +1008,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:1023: checking host system type" >&5
+echo "configure:1012: checking host system type" >&5
host_alias=$host
case "$host_alias" in
@@ -1040,7 +1029,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:1044: checking target system type" >&5
+echo "configure:1033: checking target system type" >&5
target_alias=$target
case "$target_alias" in
@@ -1058,7 +1047,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1062: checking build system type" >&5
+echo "configure:1051: checking build system type" >&5
build_alias=$build
case "$build_alias" in
@@ -1085,7 +1074,7 @@ test "$host_alias" != "$target_alias" &&
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1089: checking for $ac_word" >&5
+echo "configure:1078: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1115,7 +1104,7 @@ if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1119: checking for $ac_word" >&5
+echo "configure:1108: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1166,7 +1155,7 @@ fi
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1170: checking for $ac_word" >&5
+echo "configure:1159: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1198,7 +1187,7 @@ fi
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1202: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1191: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1209,12 +1198,12 @@ cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext << EOF
-#line 1213 "configure"
+#line 1202 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1218: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1207: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
@@ -1240,12 +1229,12 @@ if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1244: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1233: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1249: checking whether we are using GNU C" >&5
+echo "configure:1238: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1254,7 +1243,7 @@ else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1258: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1247: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
@@ -1273,7 +1262,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1277: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1266: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1306,10 +1295,10 @@ fi
if test "x$CC" != xcc; then
echo $ac_n "checking whether $CC and cc understand -c and -o together""... $ac_c" 1>&6
-echo "configure:1310: checking whether $CC and cc understand -c and -o together" >&5
+echo "configure:1299: checking whether $CC and cc understand -c and -o together" >&5
else
echo $ac_n "checking whether cc understands -c and -o together""... $ac_c" 1>&6
-echo "configure:1313: checking whether cc understands -c and -o together" >&5
+echo "configure:1302: checking whether cc understands -c and -o together" >&5
fi
set dummy $CC; ac_cc="`echo $2 |
sed -e 's/[^a-zA-Z0-9_]/_/g' -e 's/^[0-9]/_/'`"
@@ -1321,16 +1310,16 @@ else
# We do the test twice because some compilers refuse to overwrite an
# existing .o file with -o, though they will create one.
ac_try='${CC-cc} -c conftest.c -o conftest.o 1>&5'
-if { (eval echo configure:1325: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
- test -f conftest.o && { (eval echo configure:1326: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+if { (eval echo configure:1314: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+ test -f conftest.o && { (eval echo configure:1315: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
then
eval ac_cv_prog_cc_${ac_cc}_c_o=yes
if test "x$CC" != xcc; then
# Test first that cc exists at all.
- if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1331: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
+ if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1320: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
ac_try='cc -c conftest.c -o conftest.o 1>&5'
- if { (eval echo configure:1333: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
- test -f conftest.o && { (eval echo configure:1334: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+ if { (eval echo configure:1322: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+ test -f conftest.o && { (eval echo configure:1323: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
then
# cc works too.
:
@@ -1366,7 +1355,7 @@ fi
echo $ac_n "checking for long double""... $ac_c" 1>&6
-echo "configure:1370: checking for long double" >&5
+echo "configure:1359: checking for long double" >&5
if eval "test \"`echo '$''{'gcc_cv_c_long_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1374,7 +1363,7 @@ else
gcc_cv_c_long_double=yes
else
cat > conftest.$ac_ext <<EOF
-#line 1378 "configure"
+#line 1367 "configure"
#include "confdefs.h"
int main() {
@@ -1384,7 +1373,7 @@ long double foo = 0.0;
switch (0) case 0: case (sizeof(long double) >= sizeof(double)):;
; return 0; }
EOF
-if { (eval echo configure:1388: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1377: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_c_long_double=yes
else
@@ -1407,21 +1396,21 @@ fi
echo $ac_n "checking whether ${CC-cc} accepts -Wno-long-long""... $ac_c" 1>&6
-echo "configure:1411: checking whether ${CC-cc} accepts -Wno-long-long" >&5
+echo "configure:1400: checking whether ${CC-cc} accepts -Wno-long-long" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_no_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
save_CFLAGS="$CFLAGS"
CFLAGS="-Wno-long-long"
cat > conftest.$ac_ext <<EOF
-#line 1418 "configure"
+#line 1407 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1425: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1414: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_prog_cc_no_long_long=yes
else
@@ -1465,7 +1454,7 @@ esac
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1469: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1458: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -1493,7 +1482,7 @@ fi
echo $ac_n "checking whether a default assembler was specified""... $ac_c" 1>&6
-echo "configure:1497: checking whether a default assembler was specified" >&5
+echo "configure:1486: checking whether a default assembler was specified" >&5
if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
if test x"$gas_flag" = x"no"; then
echo "$ac_t""yes ($DEFAULT_ASSEMBLER)" 1>&6
@@ -1505,7 +1494,7 @@ else
fi
echo $ac_n "checking whether a default linker was specified""... $ac_c" 1>&6
-echo "configure:1509: checking whether a default linker was specified" >&5
+echo "configure:1498: checking whether a default linker was specified" >&5
if test x"${DEFAULT_LINKER+set}" = x"set"; then
if test x"$gnu_ld_flag" = x"no"; then
echo "$ac_t""yes ($DEFAULT_LINKER)" 1>&6
@@ -1517,12 +1506,12 @@ else
fi
echo $ac_n "checking for GNU C library""... $ac_c" 1>&6
-echo "configure:1521: checking for GNU C library" >&5
+echo "configure:1510: checking for GNU C library" >&5
if eval "test \"`echo '$''{'gcc_cv_glibc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1526 "configure"
+#line 1515 "configure"
#include "confdefs.h"
#include <features.h>
int main() {
@@ -1532,7 +1521,7 @@ int main() {
#endif
; return 0; }
EOF
-if { (eval echo configure:1536: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1525: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_glibc=yes
else
@@ -1553,21 +1542,21 @@ EOF
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:1557: checking for inline" >&5
+echo "configure:1546: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 1564 "configure"
+#line 1553 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:1571: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1560: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
@@ -1599,7 +1588,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1603: checking for $ac_word" >&5
+echo "configure:1592: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1629,7 +1618,7 @@ test -n "$AWK" && break
done
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:1633: checking whether ln works" >&5
+echo "configure:1622: checking whether ln works" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1661,7 +1650,7 @@ else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1665: checking whether ln -s works" >&5
+echo "configure:1654: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1693,19 +1682,19 @@ else
fi
echo $ac_n "checking for volatile""... $ac_c" 1>&6
-echo "configure:1697: checking for volatile" >&5
+echo "configure:1686: checking for volatile" >&5
if eval "test \"`echo '$''{'gcc_cv_c_volatile'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1702 "configure"
+#line 1691 "configure"
#include "confdefs.h"
int main() {
volatile int foo;
; return 0; }
EOF
-if { (eval echo configure:1709: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1698: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_c_volatile=yes
else
@@ -1728,7 +1717,7 @@ fi
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1732: checking for $ac_word" >&5
+echo "configure:1721: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1766,7 +1755,7 @@ fi
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1770: checking for a BSD compatible install" >&5
+echo "configure:1759: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -1817,7 +1806,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1821: checking how to run the C preprocessor" >&5
+echo "configure:1810: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
@@ -1832,13 +1821,13 @@ else
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1836 "configure"
+#line 1825 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1842: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1831: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
@@ -1849,13 +1838,13 @@ else
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1853 "configure"
+#line 1842 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1859: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1848: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
@@ -1866,13 +1855,13 @@ else
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 1870 "configure"
+#line 1859 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1865: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
@@ -1897,12 +1886,12 @@ fi
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1901: checking for ANSI C header files" >&5
+echo "configure:1890: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1906 "configure"
+#line 1895 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
@@ -1910,7 +1899,7 @@ else
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1914: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1903: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -1927,7 +1916,7 @@ rm -f conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1931 "configure"
+#line 1920 "configure"
#include "confdefs.h"
#include <string.h>
EOF
@@ -1945,7 +1934,7 @@ fi
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1949 "configure"
+#line 1938 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
@@ -1966,7 +1955,7 @@ if test "$cross_compiling" = yes; then
:
else
cat > conftest.$ac_ext <<EOF
-#line 1970 "configure"
+#line 1959 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -1977,7 +1966,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
exit (0); }
EOF
-if { (eval echo configure:1981: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1970: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
@@ -2001,12 +1990,12 @@ EOF
fi
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:2005: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:1994: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2010 "configure"
+#line 1999 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
@@ -2015,7 +2004,7 @@ int main() {
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:2019: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2008: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
@@ -2036,12 +2025,12 @@ EOF
fi
echo $ac_n "checking whether string.h and strings.h may both be included""... $ac_c" 1>&6
-echo "configure:2040: checking whether string.h and strings.h may both be included" >&5
+echo "configure:2029: checking whether string.h and strings.h may both be included" >&5
if eval "test \"`echo '$''{'gcc_cv_header_string'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2045 "configure"
+#line 2034 "configure"
#include "confdefs.h"
#include <string.h>
#include <strings.h>
@@ -2049,7 +2038,7 @@ int main() {
; return 0; }
EOF
-if { (eval echo configure:2053: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2042: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_header_string=yes
else
@@ -2070,12 +2059,12 @@ EOF
fi
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:2074: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:2063: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2079 "configure"
+#line 2068 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
@@ -2091,7 +2080,7 @@ wait (&s);
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
-if { (eval echo configure:2095: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2084: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
@@ -2118,17 +2107,17 @@ for ac_hdr in limits.h stddef.h string.h strings.h stdlib.h time.h \
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2122: checking for $ac_hdr" >&5
+echo "configure:2111: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2127 "configure"
+#line 2116 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2132: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2121: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -2158,17 +2147,17 @@ done
# Check for thread headers.
ac_safe=`echo "thread.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for thread.h""... $ac_c" 1>&6
-echo "configure:2162: checking for thread.h" >&5
+echo "configure:2151: checking for thread.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2167 "configure"
+#line 2156 "configure"
#include "confdefs.h"
#include <thread.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2172: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2161: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -2192,17 +2181,17 @@ fi
ac_safe=`echo "pthread.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for pthread.h""... $ac_c" 1>&6
-echo "configure:2196: checking for pthread.h" >&5
+echo "configure:2185: checking for pthread.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2201 "configure"
+#line 2190 "configure"
#include "confdefs.h"
#include <pthread.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2206: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2195: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -2229,7 +2218,7 @@ fi
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2233: checking for $ac_word" >&5
+echo "configure:2222: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnat'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2268,7 +2257,7 @@ else
# Extract the first word of "makeinfo", so it can be a program name with args.
set dummy makeinfo; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2272: checking for $ac_word" >&5
+echo "configure:2261: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2297,13 +2286,13 @@ fi
if test -n "$MAKEINFO"; then
# Found it, now check the version.
echo $ac_n "checking for modern makeinfo""... $ac_c" 1>&6
-echo "configure:2301: checking for modern makeinfo" >&5
+echo "configure:2290: checking for modern makeinfo" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_makeinfo_modern'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_prog_version=`$MAKEINFO --version 2>&1 |
sed -n 's/^.*GNU texinfo.* \([0-9][0-9.]*\).*$/\1/p'`
- echo "configure:2307: version of makeinfo is $ac_prog_version" >&5
+ echo "configure:2296: version of makeinfo is $ac_prog_version" >&5
case $ac_prog_version in
'') gcc_cv_prog_makeinfo_modern=no;;
3.1[2-9] | 3.[2-9][0-9] | 4.* | 1.6[89] | 1.7[0-9])
@@ -2323,12 +2312,10 @@ fi
if test $gcc_cv_prog_makeinfo_modern = no; then
echo "configure: warning:
*** Makeinfo is missing or too old.
-*** Info documentation will not be built or installed." 1>&2
+*** Info documentation will not be built." 1>&2
BUILD_INFO=
- INSTALL_INFO=
else
BUILD_INFO=info
- INSTALL_INFO=install-info
fi
# How about lex?
@@ -2338,7 +2325,7 @@ else
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2342: checking for $ac_word" >&5
+echo "configure:2329: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2375,7 +2362,7 @@ else
# Extract the first word of "bison", so it can be a program name with args.
set dummy bison; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2379: checking for $ac_word" >&5
+echo "configure:2366: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2409,12 +2396,12 @@ fi
echo $ac_n "checking for preprocessor stringizing operator""... $ac_c" 1>&6
-echo "configure:2413: checking for preprocessor stringizing operator" >&5
+echo "configure:2400: checking for preprocessor stringizing operator" >&5
if eval "test \"`echo '$''{'ac_cv_c_stringize'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2418 "configure"
+#line 2405 "configure"
#include "confdefs.h"
#define x(y) #y
@@ -2447,12 +2434,12 @@ echo "$ac_t""${ac_cv_c_stringize}" 1>&6
# Use <inttypes.h> only if it exists,
# doesn't clash with <sys/types.h>, and declares intmax_t.
echo $ac_n "checking for inttypes.h""... $ac_c" 1>&6
-echo "configure:2451: checking for inttypes.h" >&5
+echo "configure:2438: checking for inttypes.h" >&5
if eval "test \"`echo '$''{'gcc_cv_header_inttypes_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2456 "configure"
+#line 2443 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <inttypes.h>
@@ -2460,7 +2447,7 @@ int main() {
intmax_t i = -1;
; return 0; }
EOF
-if { (eval echo configure:2464: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2451: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_header_inttypes_h=yes
else
@@ -2485,7 +2472,7 @@ fi
# be either signed or unsigned.
#
echo $ac_n "checking for unsigned enumerated bitfields""... $ac_c" 1>&6
-echo "configure:2489: checking for unsigned enumerated bitfields" >&5
+echo "configure:2476: checking for unsigned enumerated bitfields" >&5
if eval "test \"`echo '$''{'gcc_cv_enum_bf_unsigned'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2493,7 +2480,7 @@ else
gcc_cv_enum_bf_unsigned=yes
else
cat > conftest.$ac_ext <<EOF
-#line 2497 "configure"
+#line 2484 "configure"
#include "confdefs.h"
#include <stdlib.h>
enum t { BLAH = 128 } ;
@@ -2506,7 +2493,7 @@ int main(void)
}
EOF
-if { (eval echo configure:2510: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2497: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
gcc_cv_enum_bf_unsigned=yes
else
@@ -2534,12 +2521,12 @@ for ac_func in strtoul bsearch putenv popen bcopy \
fputs_unlocked getrusage valloc iconv nl_langinfo
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2538: checking for $ac_func" >&5
+echo "configure:2525: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2543 "configure"
+#line 2530 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -2562,7 +2549,7 @@ $ac_func();
; return 0; }
EOF
-if { (eval echo configure:2566: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2553: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -2588,12 +2575,12 @@ done
echo $ac_n "checking for ssize_t""... $ac_c" 1>&6
-echo "configure:2592: checking for ssize_t" >&5
+echo "configure:2579: checking for ssize_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_ssize_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2597 "configure"
+#line 2584 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
@@ -2624,12 +2611,12 @@ fi
# Try to determine the array type of the second argument of getgroups
# for the target system (int or gid_t).
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:2628: checking for uid_t in sys/types.h" >&5
+echo "configure:2615: checking for uid_t in sys/types.h" >&5
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2633 "configure"
+#line 2620 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
@@ -2658,7 +2645,7 @@ EOF
fi
echo $ac_n "checking type of array argument to getgroups""... $ac_c" 1>&6
-echo "configure:2662: checking type of array argument to getgroups" >&5
+echo "configure:2649: checking type of array argument to getgroups" >&5
if eval "test \"`echo '$''{'ac_cv_type_getgroups'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2666,7 +2653,7 @@ else
ac_cv_type_getgroups=cross
else
cat > conftest.$ac_ext <<EOF
-#line 2670 "configure"
+#line 2657 "configure"
#include "confdefs.h"
/* Thanks to Mike Rendell for this test. */
@@ -2691,7 +2678,7 @@ main()
}
EOF
-if { (eval echo configure:2695: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2682: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_type_getgroups=gid_t
else
@@ -2705,7 +2692,7 @@ fi
if test $ac_cv_type_getgroups = cross; then
cat > conftest.$ac_ext <<EOF
-#line 2709 "configure"
+#line 2696 "configure"
#include "confdefs.h"
#include <unistd.h>
EOF
@@ -2746,12 +2733,12 @@ fi
echo $ac_n "checking for vprintf""... $ac_c" 1>&6
-echo "configure:2750: checking for vprintf" >&5
+echo "configure:2737: checking for vprintf" >&5
if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2755 "configure"
+#line 2742 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vprintf(); below. */
@@ -2774,7 +2761,7 @@ vprintf();
; return 0; }
EOF
-if { (eval echo configure:2778: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2765: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vprintf=yes"
else
@@ -2798,12 +2785,12 @@ fi
if test "$ac_cv_func_vprintf" != yes; then
echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
-echo "configure:2802: checking for _doprnt" >&5
+echo "configure:2789: checking for _doprnt" >&5
if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2807 "configure"
+#line 2794 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char _doprnt(); below. */
@@ -2826,7 +2813,7 @@ _doprnt();
; return 0; }
EOF
-if { (eval echo configure:2830: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2817: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func__doprnt=yes"
else
@@ -2862,7 +2849,7 @@ fi
echo $ac_n "checking whether the printf functions support %p""... $ac_c" 1>&6
-echo "configure:2866: checking whether the printf functions support %p" >&5
+echo "configure:2853: checking whether the printf functions support %p" >&5
if eval "test \"`echo '$''{'gcc_cv_func_printf_ptr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2870,7 +2857,7 @@ else
gcc_cv_func_printf_ptr=no
else
cat > conftest.$ac_ext <<EOF
-#line 2874 "configure"
+#line 2861 "configure"
#include "confdefs.h"
#include <stdio.h>
@@ -2883,7 +2870,7 @@ int main()
return (p != q);
}
EOF
-if { (eval echo configure:2887: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2874: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
gcc_cv_func_printf_ptr=yes
else
@@ -2916,12 +2903,12 @@ case "${host}" in
;;
esac
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:2920: checking for pid_t" >&5
+echo "configure:2907: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2925 "configure"
+#line 2912 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
@@ -2950,17 +2937,17 @@ fi
ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:2954: checking for vfork.h" >&5
+echo "configure:2941: checking for vfork.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2959 "configure"
+#line 2946 "configure"
#include "confdefs.h"
#include <vfork.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2964: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2951: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -2985,18 +2972,18 @@ else
fi
echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:2989: checking for working vfork" >&5
+echo "configure:2976: checking for working vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:2995: checking for vfork" >&5
+echo "configure:2982: checking for vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3000 "configure"
+#line 2987 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vfork(); below. */
@@ -3019,7 +3006,7 @@ vfork();
; return 0; }
EOF
-if { (eval echo configure:3023: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3010: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vfork=yes"
else
@@ -3041,7 +3028,7 @@ fi
ac_cv_func_vfork_works=$ac_cv_func_vfork
else
cat > conftest.$ac_ext <<EOF
-#line 3045 "configure"
+#line 3032 "configure"
#include "confdefs.h"
/* Thanks to Paul Eggert for this test. */
#include <stdio.h>
@@ -3136,7 +3123,7 @@ main() {
}
}
EOF
-if { (eval echo configure:3140: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3127: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_vfork_works=yes
else
@@ -3162,17 +3149,17 @@ for ac_hdr in unistd.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3166: checking for $ac_hdr" >&5
+echo "configure:3153: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3171 "configure"
+#line 3158 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3176: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3163: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -3201,12 +3188,12 @@ done
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3205: checking for $ac_func" >&5
+echo "configure:3192: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3210 "configure"
+#line 3197 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -3229,7 +3216,7 @@ $ac_func();
; return 0; }
EOF
-if { (eval echo configure:3233: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3220: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -3254,7 +3241,7 @@ fi
done
echo $ac_n "checking for working mmap which provides zeroed pages anywhere""... $ac_c" 1>&6
-echo "configure:3258: checking for working mmap which provides zeroed pages anywhere" >&5
+echo "configure:3245: checking for working mmap which provides zeroed pages anywhere" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_anywhere'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -3262,7 +3249,7 @@ else
ac_cv_func_mmap_anywhere=no
else
cat > conftest.$ac_ext <<EOF
-#line 3266 "configure"
+#line 3253 "configure"
#include "confdefs.h"
/* Test by Richard Henderson and Alexandre Oliva.
@@ -3345,7 +3332,7 @@ int main()
exit(0);
}
EOF
-if { (eval echo configure:3349: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3336: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_anywhere=yes
else
@@ -3368,7 +3355,7 @@ EOF
fi
echo $ac_n "checking for working mmap of a file""... $ac_c" 1>&6
-echo "configure:3372: checking for working mmap of a file" >&5
+echo "configure:3359: checking for working mmap of a file" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_file'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -3383,7 +3370,7 @@ if test "$cross_compiling" = yes; then
ac_cv_func_mmap_file=no
else
cat > conftest.$ac_ext <<EOF
-#line 3387 "configure"
+#line 3374 "configure"
#include "confdefs.h"
/* Test by Zack Weinberg. Modified from MMAP_ANYWHERE test by
@@ -3420,7 +3407,7 @@ int main()
exit(0);
}
EOF
-if { (eval echo configure:3424: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3411: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_file=yes
else
@@ -3453,12 +3440,12 @@ for ac_func in bcopy \
do
ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:3457: checking whether $ac_func is declared" >&5
+echo "configure:3444: checking whether $ac_func is declared" >&5
if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3462 "configure"
+#line 3449 "configure"
#include "confdefs.h"
#include "gansidecl.h"
#include "system.h"
@@ -3469,7 +3456,7 @@ char *(*pfn) = (char *(*)) $ac_func ;
#endif
; return 0; }
EOF
-if { (eval echo configure:3473: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3460: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_have_decl_$ac_func=yes"
else
@@ -3562,12 +3549,12 @@ for ac_func in getrlimit setrlimit getrusage
do
ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:3566: checking whether $ac_func is declared" >&5
+echo "configure:3553: checking whether $ac_func is declared" >&5
if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3571 "configure"
+#line 3558 "configure"
#include "confdefs.h"
#include "gansidecl.h"
#include "system.h"
@@ -3582,7 +3569,7 @@ char *(*pfn) = (char *(*)) $ac_func ;
#endif
; return 0; }
EOF
-if { (eval echo configure:3586: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3573: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_have_decl_$ac_func=yes"
else
@@ -3625,12 +3612,12 @@ CFLAGS="$saved_CFLAGS"
# mkdir takes a single argument on some systems.
echo $ac_n "checking if mkdir takes one argument""... $ac_c" 1>&6
-echo "configure:3629: checking if mkdir takes one argument" >&5
+echo "configure:3616: checking if mkdir takes one argument" >&5
if eval "test \"`echo '$''{'gcc_cv_mkdir_takes_one_arg'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3634 "configure"
+#line 3621 "configure"
#include "confdefs.h"
#include <sys/types.h>
@@ -3647,7 +3634,7 @@ int main() {
mkdir ("foo", 0);
; return 0; }
EOF
-if { (eval echo configure:3651: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3638: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_mkdir_takes_one_arg=no
else
@@ -3955,7 +3942,7 @@ fi
echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
-echo "configure:3959: checking for strerror in -lcposix" >&5
+echo "configure:3946: checking for strerror in -lcposix" >&5
ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -3963,7 +3950,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lcposix $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3967 "configure"
+#line 3954 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
@@ -3974,7 +3961,7 @@ int main() {
strerror()
; return 0; }
EOF
-if { (eval echo configure:3978: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3965: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -3997,12 +3984,12 @@ fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:4001: checking for working const" >&5
+echo "configure:3988: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4006 "configure"
+#line 3993 "configure"
#include "confdefs.h"
int main() {
@@ -4051,7 +4038,7 @@ ccp = (char const *const *) p;
; return 0; }
EOF
-if { (eval echo configure:4055: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4042: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
@@ -4072,12 +4059,12 @@ EOF
fi
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:4076: checking for off_t" >&5
+echo "configure:4063: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4081 "configure"
+#line 4068 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
@@ -4105,12 +4092,12 @@ EOF
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:4109: checking for size_t" >&5
+echo "configure:4096: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4114 "configure"
+#line 4101 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
@@ -4140,19 +4127,19 @@ fi
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:4144: checking for working alloca.h" >&5
+echo "configure:4131: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4149 "configure"
+#line 4136 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:4156: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4143: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
@@ -4173,12 +4160,12 @@ EOF
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:4177: checking for alloca" >&5
+echo "configure:4164: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4182 "configure"
+#line 4169 "configure"
#include "confdefs.h"
#ifdef __GNUC__
@@ -4206,7 +4193,7 @@ int main() {
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:4210: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4197: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
@@ -4238,12 +4225,12 @@ EOF
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:4242: checking whether alloca needs Cray hooks" >&5
+echo "configure:4229: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4247 "configure"
+#line 4234 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
@@ -4268,12 +4255,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4272: checking for $ac_func" >&5
+echo "configure:4259: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4277 "configure"
+#line 4264 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -4296,7 +4283,7 @@ $ac_func();
; return 0; }
EOF
-if { (eval echo configure:4300: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4287: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -4323,7 +4310,7 @@ done
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:4327: checking stack direction for C alloca" >&5
+echo "configure:4314: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -4331,7 +4318,7 @@ else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 4335 "configure"
+#line 4322 "configure"
#include "confdefs.h"
find_stack_direction ()
{
@@ -4350,7 +4337,7 @@ main ()
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:4354: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4341: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
@@ -4377,17 +4364,17 @@ unistd.h sys/param.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4381: checking for $ac_hdr" >&5
+echo "configure:4368: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4386 "configure"
+#line 4373 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4391: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4378: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -4417,12 +4404,12 @@ done
strdup __argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4421: checking for $ac_func" >&5
+echo "configure:4408: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4426 "configure"
+#line 4413 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -4445,7 +4432,7 @@ $ac_func();
; return 0; }
EOF
-if { (eval echo configure:4449: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4436: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -4474,12 +4461,12 @@ done
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4478: checking for $ac_func" >&5
+echo "configure:4465: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4483 "configure"
+#line 4470 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -4502,7 +4489,7 @@ $ac_func();
; return 0; }
EOF
-if { (eval echo configure:4506: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4493: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -4536,19 +4523,19 @@ EOF
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:4540: checking for LC_MESSAGES" >&5
+echo "configure:4527: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4545 "configure"
+#line 4532 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:4552: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4539: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
@@ -4569,7 +4556,7 @@ EOF
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:4573: checking whether NLS is requested" >&5
+echo "configure:4560: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
@@ -4589,7 +4576,7 @@ fi
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:4593: checking whether included gettext is requested" >&5
+echo "configure:4580: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
@@ -4608,17 +4595,17 @@ fi
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:4612: checking for libintl.h" >&5
+echo "configure:4599: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4617 "configure"
+#line 4604 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4622: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4609: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -4635,19 +4622,19 @@ fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:4639: checking for gettext in libc" >&5
+echo "configure:4626: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4644 "configure"
+#line 4631 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:4651: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4638: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
@@ -4663,7 +4650,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:4667: checking for bindtextdomain in -lintl" >&5
+echo "configure:4654: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -4671,7 +4658,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4675 "configure"
+#line 4662 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
@@ -4682,7 +4669,7 @@ int main() {
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:4686: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4673: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -4698,12 +4685,12 @@ fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:4702: checking for gettext in libintl" >&5
+echo "configure:4689: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for gettext in -lintl""... $ac_c" 1>&6
-echo "configure:4707: checking for gettext in -lintl" >&5
+echo "configure:4694: checking for gettext in -lintl" >&5
ac_lib_var=`echo intl'_'gettext | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -4711,7 +4698,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4715 "configure"
+#line 4702 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
@@ -4722,7 +4709,7 @@ int main() {
gettext()
; return 0; }
EOF
-if { (eval echo configure:4726: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4713: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -4761,7 +4748,7 @@ EOF
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4765: checking for $ac_word" >&5
+echo "configure:4752: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -4795,12 +4782,12 @@ fi
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4799: checking for $ac_func" >&5
+echo "configure:4786: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4804 "configure"
+#line 4791 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -4823,7 +4810,7 @@ $ac_func();
; return 0; }
EOF
-if { (eval echo configure:4827: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4814: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -4850,7 +4837,7 @@ done
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4854: checking for $ac_word" >&5
+echo "configure:4841: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -4886,7 +4873,7 @@ fi
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4890: checking for $ac_word" >&5
+echo "configure:4877: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -4918,7 +4905,7 @@ else
fi
cat > conftest.$ac_ext <<EOF
-#line 4922 "configure"
+#line 4909 "configure"
#include "confdefs.h"
int main() {
@@ -4926,7 +4913,7 @@ extern int _nl_msg_cat_cntr;
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:4930: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4917: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
@@ -4951,7 +4938,7 @@ fi
if test "$CATOBJEXT" = "NONE"; then
echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6
-echo "configure:4955: checking whether catgets can be used" >&5
+echo "configure:4942: checking whether catgets can be used" >&5
# Check whether --with-catgets or --without-catgets was given.
if test "${with_catgets+set}" = set; then
withval="$with_catgets"
@@ -4964,7 +4951,7 @@ fi
if test "$nls_cv_use_catgets" = "yes"; then
echo $ac_n "checking for main in -li""... $ac_c" 1>&6
-echo "configure:4968: checking for main in -li" >&5
+echo "configure:4955: checking for main in -li" >&5
ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -4972,14 +4959,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-li $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4976 "configure"
+#line 4963 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:4983: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4970: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -5007,12 +4994,12 @@ else
fi
echo $ac_n "checking for catgets""... $ac_c" 1>&6
-echo "configure:5011: checking for catgets" >&5
+echo "configure:4998: checking for catgets" >&5
if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5016 "configure"
+#line 5003 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char catgets(); below. */
@@ -5035,7 +5022,7 @@ catgets();
; return 0; }
EOF
-if { (eval echo configure:5039: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5026: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_catgets=yes"
else
@@ -5057,7 +5044,7 @@ EOF
# Extract the first word of "gencat", so it can be a program name with args.
set dummy gencat; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5061: checking for $ac_word" >&5
+echo "configure:5048: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_GENCAT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -5093,7 +5080,7 @@ fi
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5097: checking for $ac_word" >&5
+echo "configure:5084: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -5130,7 +5117,7 @@ fi
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5134: checking for $ac_word" >&5
+echo "configure:5121: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -5168,7 +5155,7 @@ fi
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5172: checking for $ac_word" >&5
+echo "configure:5159: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -5226,7 +5213,7 @@ fi
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5230: checking for $ac_word" >&5
+echo "configure:5217: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -5260,7 +5247,7 @@ fi
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5264: checking for $ac_word" >&5
+echo "configure:5251: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -5299,7 +5286,7 @@ fi
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5303: checking for $ac_word" >&5
+echo "configure:5290: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -5398,7 +5385,7 @@ fi
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:5402: checking for catalogs to be installed" >&5
+echo "configure:5389: checking for catalogs to be installed" >&5
if test "x$LINGUAS" = "x"; then
LINGUAS=$ALL_LINGUAS
else
@@ -5430,17 +5417,17 @@ echo "configure:5402: checking for catalogs to be installed" >&5
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:5434: checking for linux/version.h" >&5
+echo "configure:5421: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5439 "configure"
+#line 5426 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5444: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5431: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -5515,7 +5502,7 @@ fi
echo $ac_n "checking whether windows registry support is requested""... $ac_c" 1>&6
-echo "configure:5519: checking whether windows registry support is requested" >&5
+echo "configure:5506: checking whether windows registry support is requested" >&5
if test x$enable_win32_registry != xno; then
cat >> confdefs.h <<\EOF
#define ENABLE_WIN32_REGISTRY 1
@@ -5544,7 +5531,7 @@ esac
if test x$enable_win32_registry != xno; then
echo $ac_n "checking registry key on windows hosts""... $ac_c" 1>&6
-echo "configure:5548: checking registry key on windows hosts" >&5
+echo "configure:5535: checking registry key on windows hosts" >&5
cat >> confdefs.h <<EOF
#define WIN32_REGISTRY_KEY "$gcc_cv_win32_registry_key"
EOF
@@ -5724,7 +5711,7 @@ fi
# Figure out what assembler we will be using.
echo $ac_n "checking what assembler to use""... $ac_c" 1>&6
-echo "configure:5728: checking what assembler to use" >&5
+echo "configure:5715: checking what assembler to use" >&5
gcc_cv_as=
gcc_cv_gas_major_version=
gcc_cv_gas_minor_version=
@@ -5809,7 +5796,7 @@ fi
# Figure out what nm we will be using.
echo $ac_n "checking what nm to use""... $ac_c" 1>&6
-echo "configure:5813: checking what nm to use" >&5
+echo "configure:5800: checking what nm to use" >&5
if test -x nm$host_exeext; then
gcc_cv_nm=./nm$host_exeext
elif test x$host = x$target; then
@@ -5820,7 +5807,7 @@ echo "$ac_t""$gcc_cv_nm" 1>&6
# Figure out what assembler alignment features are present.
echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
-echo "configure:5824: checking assembler alignment features" >&5
+echo "configure:5811: checking assembler alignment features" >&5
gcc_cv_as_alignment_features=none
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
# Gas version 2.6 and later support for .balign and .p2align.
@@ -5868,7 +5855,7 @@ fi
echo "$ac_t""$gcc_cv_as_alignment_features" 1>&6
echo $ac_n "checking assembler subsection support""... $ac_c" 1>&6
-echo "configure:5872: checking assembler subsection support" >&5
+echo "configure:5859: checking assembler subsection support" >&5
gcc_cv_as_subsections=no
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
@@ -5908,7 +5895,7 @@ fi
echo "$ac_t""$gcc_cv_as_subsections" 1>&6
echo $ac_n "checking assembler weak support""... $ac_c" 1>&6
-echo "configure:5912: checking assembler weak support" >&5
+echo "configure:5899: checking assembler weak support" >&5
gcc_cv_as_weak=no
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 2 -o "$gcc_cv_gas_major_version" -gt 2; then
@@ -5931,7 +5918,7 @@ fi
echo "$ac_t""$gcc_cv_as_weak" 1>&6
echo $ac_n "checking assembler hidden support""... $ac_c" 1>&6
-echo "configure:5935: checking assembler hidden support" >&5
+echo "configure:5922: checking assembler hidden support" >&5
gcc_cv_as_hidden=no
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 10 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
@@ -5957,7 +5944,7 @@ echo "$ac_t""$gcc_cv_as_hidden" 1>&6
case "$target" in
sparc*-*-*)
echo $ac_n "checking assembler .register pseudo-op support""... $ac_c" 1>&6
-echo "configure:5961: checking assembler .register pseudo-op support" >&5
+echo "configure:5948: checking assembler .register pseudo-op support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_register_pseudo_op'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -5985,7 +5972,7 @@ EOF
fi
echo $ac_n "checking assembler supports -relax""... $ac_c" 1>&6
-echo "configure:5989: checking assembler supports -relax" >&5
+echo "configure:5976: checking assembler supports -relax" >&5
if eval "test \"`echo '$''{'gcc_cv_as_relax_opt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -6015,7 +6002,7 @@ EOF
case "$tm_file" in
*64*)
echo $ac_n "checking for 64 bit support in assembler ($gcc_cv_as)""... $ac_c" 1>&6
-echo "configure:6019: checking for 64 bit support in assembler ($gcc_cv_as)" >&5
+echo "configure:6006: checking for 64 bit support in assembler ($gcc_cv_as)" >&5
if eval "test \"`echo '$''{'gcc_cv_as_flags64'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -6060,7 +6047,7 @@ EOF
if test "x$gcc_cv_as_flags64" != xno; then
echo $ac_n "checking for assembler offsetable %lo() support""... $ac_c" 1>&6
-echo "configure:6064: checking for assembler offsetable %lo() support" >&5
+echo "configure:6051: checking for assembler offsetable %lo() support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_offsetable_lo10'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -6099,7 +6086,7 @@ EOF
i[34567]86-*-*)
echo $ac_n "checking assembler instructions""... $ac_c" 1>&6
-echo "configure:6103: checking assembler instructions" >&5
+echo "configure:6090: checking assembler instructions" >&5
gcc_cv_as_instructions=
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2; then
@@ -6128,7 +6115,7 @@ EOF
esac
echo $ac_n "checking assembler dwarf2 debug_line support""... $ac_c" 1>&6
-echo "configure:6132: checking assembler dwarf2 debug_line support" >&5
+echo "configure:6119: checking assembler dwarf2 debug_line support" >&5
gcc_cv_as_dwarf2_debug_line=no
# ??? Not all targets support dwarf2 debug_line, even within a version
# of gas. Moreover, we need to emit a valid instruction to trigger any
@@ -6305,7 +6292,7 @@ EOF
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:6309: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:6296: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
@@ -6765,7 +6752,6 @@ s%@CPP@%$CPP%g
s%@gnat@%$gnat%g
s%@MAKEINFO@%$MAKEINFO%g
s%@BUILD_INFO@%$BUILD_INFO%g
-s%@INSTALL_INFO@%$INSTALL_INFO%g
s%@FLEX@%$FLEX%g
s%@BISON@%$BISON%g
s%@TARGET_GETGROUPS_T@%$TARGET_GETGROUPS_T%g
diff --git a/gcc/configure.in b/gcc/configure.in
index 329c42a69357c34f96da283e7e0e2884bc7db7c7..e5fe5e0c5612109a9a9b736507a7a671287adca6 100644
--- a/gcc/configure.in
+++ b/gcc/configure.in
@@ -462,12 +462,10 @@ fi
if test $gcc_cv_prog_makeinfo_modern = no; then
AC_MSG_WARN([
*** Makeinfo is missing or too old.
-*** Info documentation will not be built or installed.])
+*** Info documentation will not be built.])
BUILD_INFO=
- INSTALL_INFO=
else
BUILD_INFO=info AC_SUBST(BUILD_INFO)
- INSTALL_INFO=install-info AC_SUBST(INSTALL_INFO)
fi
# How about lex?
diff --git a/gcc/f/ChangeLog b/gcc/f/ChangeLog
index 3087b75e43998fe1eb6d3b46c04e6b8dc6b58eb1..99cfd005a85d64b03925bf3c47f005183c69f4c0 100644
--- a/gcc/f/ChangeLog
+++ b/gcc/f/ChangeLog
@@ -1,3 +1,11 @@
+2000-12-08 Joseph S. Myers <jsm28@cam.ac.uk>
+
+ * Make-lang.in (f77.info): Depend on info files in source
+ directory.
+ (f/g77.info): Build info files in source directory; don't build
+ them unless BUILD_INFO is "info".
+ (f77.install-info): Install info files from source directory.
+
2000-12-07 Zack Weinberg <zack@wolery.stanford.edu>
* Make-lang.in: Link f/fini with safe-ctype.o.
diff --git a/gcc/f/Make-lang.in b/gcc/f/Make-lang.in
index 6af053630d94753937854795480418fa7f914072..dbe291f679f0dbf5c280fe89c5b8d6040553d1a3 100644
--- a/gcc/f/Make-lang.in
+++ b/gcc/f/Make-lang.in
@@ -159,11 +159,11 @@ f77.all.cross: g77-cross$(exeext)
f77.start.encap: g77$(exeext)
f77.rest.encap:
-f77.info: f/g77.info
+f77.info: $(srcdir)/f/g77.info
f77.dvi: f/g77.dvi
# g77 documentation.
-f/g77.info: $(srcdir)/f/g77.texi $(srcdir)/f/bugs.texi \
+$(srcdir)/f/g77.info: $(srcdir)/f/g77.texi $(srcdir)/f/bugs.texi \
$(srcdir)/f/ffe.texi \
$(srcdir)/f/g77install.texi $(srcdir)/f/news.texi \
$(srcdir)/f/intdoc.texi $(srcdir)/f/root.texi
@@ -171,9 +171,9 @@ f/g77.info: $(srcdir)/f/g77.texi $(srcdir)/f/bugs.texi \
*[fF]77*) touch lang-f77;; \
*) rm -f lang-f77;; \
esac
- if [ -f lang-f77 ]; then \
+ if [ -f lang-f77 ] && [ x$(BUILD_INFO) = xinfo ]; then \
rm -f $(srcdir)/f/g77.info-*; \
- $(MAKEINFO) -I$(srcdir)/f -o f/g77.info $(srcdir)/f/g77.texi; \
+ cd $(srcdir)/f && $(MAKEINFO) -o g77.info g77.texi; \
else true; fi
f/g77.dvi: $(srcdir)/f/g77.texi $(srcdir)/f/bugs.texi \
@@ -298,9 +298,9 @@ f77.install-info: f77.info installdirs
*[fF]77*) touch $(libsubdir)/lang-f77.info;; \
*) rm -f $(libsubdir)/lang-f77.info;; \
esac
- if [ -f $(libsubdir)/lang-f77.info -a -f f/g77.info ] ; then \
+ if [ -f $(libsubdir)/lang-f77.info -a -f $(srcdir)/f/g77.info ] ; then \
rm -f $(infodir)/g77.info*; \
- for f in f/g77.info*; do \
+ for f in $(srcdir)/f/g77.info*; do \
realfile=`echo $$f | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
$(INSTALL_DATA) $$f $(infodir)/$$realfile; \
done; \
diff --git a/gcc/texinfo.tex b/gcc/texinfo.tex
index 4ca7bb3aa0d258a7805aba82f037702034f73212..978f7ad01d516952aca2226fe51ea0ee903cc6f1 100644
--- a/gcc/texinfo.tex
+++ b/gcc/texinfo.tex
@@ -3,9 +3,9 @@
% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{1998-11-13}%
+\def\texinfoversion{2000-11-09.08}
%
-% Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 94, 95, 96, 97, 98
+% Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 2000
% Free Software Foundation, Inc.
%
% This texinfo.tex file is free software; you can redistribute it and/or
@@ -29,30 +29,34 @@
%
% Please try the latest version of texinfo.tex before submitting bug
% reports; you can get the latest version from:
-% ftp://ftp.gnu.org/pub/gnu/texinfo.tex
+% ftp://ftp.gnu.org/gnu/texinfo.tex
+% (and all GNU mirrors, see http://www.gnu.org/order/ftp.html)
+% ftp://texinfo.org/tex/texinfo.tex
+% ftp://us.ctan.org/macros/texinfo/texinfo.tex
+% (and all CTAN mirrors, finger ctan@us.ctan.org for a list).
% /home/gd/gnu/doc/texinfo.tex on the GNU machines.
-% (and all GNU mirrors, see ftp://ftp.gnu.org/pub/gnu/README.mirrors)
-% ftp://tug.org/tex/texinfo.tex
-% ftp://ctan.org/macros/texinfo/texinfo.tex
-% (and all CTAN mirrors, finger ctan@tug.org for a list).
-% The texinfo.tex in the texinfo distribution itself could well be out
+% The texinfo.tex in any given Texinfo distribution could well be out
% of date, so if that's what you're using, please check.
-%
-% Send bug reports to bug-texinfo@gnu.org.
-% Please include a precise test case in each bug report,
-% including a complete document with which we can reproduce the problem.
-%
+% Texinfo has a small home page at http://texinfo.org/.
+%
+% Send bug reports to bug-texinfo@gnu.org. Please include including a
+% complete document in each bug report with which we can reproduce the
+% problem. Patches are, of course, greatly appreciated.
+%
% To process a Texinfo manual with TeX, it's most reliable to use the
-% texi2dvi shell script that comes with the distribution. For simple
-% manuals, you can get away with:
+% texi2dvi shell script that comes with the distribution. For a simple
+% manual foo.texi, however, you can get away with this:
% tex foo.texi
% texindex foo.??
% tex foo.texi
% tex foo.texi
-% dvips foo.dvi -o # or whatever, to process the dvi file.
+% dvips foo.dvi -o # or whatever, to process the dvi file; this makes foo.ps.
% The extra runs of TeX get the cross-reference information correct.
% Sometimes one run after texindex suffices, and sometimes you need more
% than two; texi2dvi does it as many times as necessary.
+%
+% It is possible to adapt texinfo.tex for other languages. You can get
+% the existing language-specific files from ftp://ftp.gnu.org/gnu/texinfo/.
\message{Loading texinfo [version \texinfoversion]:}
@@ -63,7 +67,6 @@
\catcode`+=\active \catcode`\_=\active}
% Save some parts of plain tex whose names we will redefine.
-
\let\ptexb=\b
\let\ptexbullet=\bullet
\let\ptexc=\c
@@ -83,7 +86,6 @@
% For @tex, we can use \tabalign.
\let\+ = \relax
-
\message{Basics,}
\chardef\other=12
@@ -92,19 +94,46 @@
\newlinechar = `^^J
% Set up fixed words for English if not already set.
-\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi
-\ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi
-\ifx\putwordfile\undefined \gdef\putwordfile{file}\fi
-\ifx\putwordInfo\undefined \gdef\putwordfile{Info}\fi
-\ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi
-\ifx\putwordon\undefined \gdef\putwordon{on}\fi
-\ifx\putwordpage\undefined \gdef\putwordpage{page}\fi
-\ifx\putwordsection\undefined \gdef\putwordsection{section}\fi
-\ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi
-\ifx\putwordsee\undefined \gdef\putwordsee{see}\fi
-\ifx\putwordSee\undefined \gdef\putwordSee{See}\fi
-\ifx\putwordShortContents\undefined \gdef\putwordShortContents{Short Contents}\fi
-\ifx\putwordTableofContents\undefined\gdef\putwordTableofContents{Table of Contents}\fi
+\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi
+\ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi
+\ifx\putwordfile\undefined \gdef\putwordfile{file}\fi
+\ifx\putwordin\undefined \gdef\putwordin{in}\fi
+\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
+\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
+\ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi
+\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi
+\ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi
+\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi
+\ifx\putwordof\undefined \gdef\putwordof{of}\fi
+\ifx\putwordon\undefined \gdef\putwordon{on}\fi
+\ifx\putwordpage\undefined \gdef\putwordpage{page}\fi
+\ifx\putwordsection\undefined \gdef\putwordsection{section}\fi
+\ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi
+\ifx\putwordsee\undefined \gdef\putwordsee{see}\fi
+\ifx\putwordSee\undefined \gdef\putwordSee{See}\fi
+\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi
+\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi
+%
+\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi
+\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi
+\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi
+\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi
+\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi
+\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi
+\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi
+\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi
+\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi
+\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi
+\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi
+\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi
+%
+\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi
+\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi
+\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi
+\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi
+\ifx\putwordDeftypevar\undefined\gdef\putwordDeftypevar{Variable}\fi
+\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi
+\ifx\putwordDeftypefun\undefined\gdef\putwordDeftypefun{Function}\fi
% Ignore a token.
%
@@ -125,15 +154,25 @@
% since that produces some useless output on the terminal.
%
\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
+\ifx\eTeXversion\undefined
\def\loggingall{\tracingcommands2 \tracingstats2
\tracingpages1 \tracingoutput1 \tracinglostchars1
\tracingmacros2 \tracingparagraphs1 \tracingrestores1
\showboxbreadth\maxdimen\showboxdepth\maxdimen
}%
+\else
+\def\loggingall{\tracingcommands3 \tracingstats2
+ \tracingpages1 \tracingoutput1 \tracinglostchars1
+ \tracingmacros2 \tracingparagraphs1 \tracingrestores1
+ \tracingscantokens1 \tracingassigns1 \tracingifs1
+ \tracinggroups1 \tracingnesting2
+ \showboxbreadth\maxdimen\showboxdepth\maxdimen
+}%
+\fi
% For @cropmarks command.
% Do @cropmarks to get crop marks.
-%
+%
\newif\ifcropmarks
\let\cropmarks = \cropmarkstrue
%
@@ -175,6 +214,9 @@
\normalturnoffactive % \ in index entries must not stay \, e.g., if
% the page break happens to be in the middle of an example.
\shipout\vbox{%
+ % Do this early so pdf references go to the beginning of the page.
+ \ifpdfmakepagedest \pdfmkdest{\the\pageno} \fi
+ %
\ifcropmarks \vbox to \outervsize\bgroup
\hsize = \outerhsize
\vskip-\topandbottommargin
@@ -333,11 +375,11 @@
%% Call \inENV within environments (after a \begingroup)
\newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi}
\def\ENVcheck{%
-\ifENV\errmessage{Still within an environment. Type Return to continue.}
+\ifENV\errmessage{Still within an environment; press RETURN to continue}
\endgroup\fi} % This is not perfect, but it should reduce lossage
% @begin foo is the same as @foo, for now.
-\newhelp\EMsimple{Type <Return> to continue.}
+\newhelp\EMsimple{Press RETURN to continue.}
\outer\def\begin{\parsearg\beginxxx}
@@ -553,41 +595,47 @@ where each line of input produces a line of output.}
%% This method tries to make TeX break the page naturally
%% if the depth of the box does not fit.
%{\baselineskip=0pt%
-%\vtop to #1\mil{\vfil}\kern -#1\mil\penalty 10000
+%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak
%\prevdepth=-1000pt
%}}
\def\needx#1{%
- % Go into vertical mode, so we don't make a big box in the middle of a
+ % Ensure vertical mode, so we don't make a big box in the middle of a
% paragraph.
\par
%
- % Don't add any leading before our big empty box, but allow a page
- % break, since the best break might be right here.
- \allowbreak
- \nointerlineskip
- \vtop to #1\mil{\vfil}%
- %
- % TeX does not even consider page breaks if a penalty added to the
- % main vertical list is 10000 or more. But in order to see if the
- % empty box we just added fits on the page, we must make it consider
- % page breaks. On the other hand, we don't want to actually break the
- % page after the empty box. So we use a penalty of 9999.
- %
- % There is an extremely small chance that TeX will actually break the
- % page at this \penalty, if there are no other feasible breakpoints in
- % sight. (If the user is using lots of big @group commands, which
- % almost-but-not-quite fill up a page, TeX will have a hard time doing
- % good page breaking, for example.) However, I could not construct an
- % example where a page broke at this \penalty; if it happens in a real
- % document, then we can reconsider our strategy.
- \penalty9999
- %
- % Back up by the size of the box, whether we did a page break or not.
- \kern -#1\mil
- %
- % Do not allow a page break right after this kern.
- \nobreak
+ % If the @need value is less than one line space, it's useless.
+ \dimen0 = #1\mil
+ \dimen2 = \ht\strutbox
+ \advance\dimen2 by \dp\strutbox
+ \ifdim\dimen0 > \dimen2
+ %
+ % Do a \strut just to make the height of this box be normal, so the
+ % normal leading is inserted relative to the preceding line.
+ % And a page break here is fine.
+ \vtop to #1\mil{\strut\vfil}%
+ %
+ % TeX does not even consider page breaks if a penalty added to the
+ % main vertical list is 10000 or more. But in order to see if the
+ % empty box we just added fits on the page, we must make it consider
+ % page breaks. On the other hand, we don't want to actually break the
+ % page after the empty box. So we use a penalty of 9999.
+ %
+ % There is an extremely small chance that TeX will actually break the
+ % page at this \penalty, if there are no other feasible breakpoints in
+ % sight. (If the user is using lots of big @group commands, which
+ % almost-but-not-quite fill up a page, TeX will have a hard time doing
+ % good page breaking, for example.) However, I could not construct an
+ % example where a page broke at this \penalty; if it happens in a real
+ % document, then we can reconsider our strategy.
+ \penalty9999
+ %
+ % Back up by the size of the box, whether we did a page break or not.
+ \kern -#1\mil
+ %
+ % Do not allow a page break right after this kern.
+ \nobreak
+ \fi
}
% @br forces paragraph break
@@ -598,15 +646,19 @@ where each line of input produces a line of output.}
% We do .5em per period so that it has the same spacing in a typewriter
% font as three actual period characters.
%
-\def\dots{\hbox to 1.5em{%
- \hskip 0pt plus 0.25fil minus 0.25fil
- .\hss.\hss.%
- \hskip 0pt plus 0.5fil minus 0.5fil
-}}
+\def\dots{%
+ \leavevmode
+ \hbox to 1.5em{%
+ \hskip 0pt plus 0.25fil minus 0.25fil
+ .\hss.\hss.%
+ \hskip 0pt plus 0.5fil minus 0.5fil
+ }%
+}
% @enddots{} is an end-of-sentence ellipsis.
-%
+%
\def\enddots{%
+ \leavevmode
\hbox to 2em{%
\hskip 0pt plus 0.25fil minus 0.25fil
.\hss.\hss.\hss.%
@@ -617,7 +669,7 @@ where each line of input produces a line of output.}
% @page forces the start of a new page
-
+%
\def\page{\par\vfill\supereject}
% @exdent text....
@@ -636,16 +688,39 @@ where each line of input produces a line of output.}
\def\nofillexdentyyy #1{{\advance \leftskip by -\exdentamount
\leftline{\hskip\leftskip{\rm#1}}}}
-% @inmargin{TEXT} puts TEXT in the margin next to the current paragraph.
-
-\def\inmargin#1{%
-\strut\vadjust{\nobreak\kern-\strutdepth
- \vtop to \strutdepth{\baselineskip\strutdepth\vss
- \llap{\rightskip=\inmarginspacing \vbox{\noindent #1}}\null}}}
+% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
+% paragraph. For more general purposes, use the \margin insertion
+% class. WHICH is `l' or `r'.
+%
\newskip\inmarginspacing \inmarginspacing=1cm
\def\strutdepth{\dp\strutbox}
-
-%\hbox{{\rm#1}}\hfil\break}}
+%
+\def\doinmargin#1#2{\strut\vadjust{%
+ \nobreak
+ \kern-\strutdepth
+ \vtop to \strutdepth{%
+ \baselineskip=\strutdepth
+ \vss
+ % if you have multiple lines of stuff to put here, you'll need to
+ % make the vbox yourself of the appropriate size.
+ \ifx#1l%
+ \llap{#2\hskip\inmarginspacing}%
+ \else
+ \rlap{\hskip\hsize\hskip\inmarginspacing#2}%
+ \fi
+ \null
+ }%
+}}
+\def\inleftmargin{\doinmargin l}
+\def\inrightmargin{\doinmargin r}
+\def\inmargin{% not perfect, but better than nothing.
+ \ifodd\pageno
+ \let\temp=\inleftmargin
+ \else
+ \let\temp=\inrightmargin
+ \fi
+ \temp
+}
% @include file insert text of that file as input.
% Allow normal characters that we make active in the argument (a file name).
@@ -684,435 +759,290 @@ where each line of input produces a line of output.}
% @c is the same as @comment
% @ignore ... @end ignore is another way to write a comment
-\def\comment{\catcode 64=\other \catcode 123=\other \catcode 125=\other%
-\parsearg \commentxxx}
-
-\def\commentxxx #1{\catcode 64=0 \catcode 123=1 \catcode 125=2 }
+\def\comment{\begingroup \catcode`\^^M=\other%
+\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
+\commentxxx}
+{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
\let\c=\comment
-% @paragraphindent is defined for the Info formatting commands only.
-\let\paragraphindent=\comment
-
-% Prevent errors for section commands.
-% Used in @ignore and in failing conditionals.
-\def\ignoresections{%
-\let\chapter=\relax
-\let\unnumbered=\relax
-\let\top=\relax
-\let\unnumberedsec=\relax
-\let\unnumberedsection=\relax
-\let\unnumberedsubsec=\relax
-\let\unnumberedsubsection=\relax
-\let\unnumberedsubsubsec=\relax
-\let\unnumberedsubsubsection=\relax
-\let\section=\relax
-\let\subsec=\relax
-\let\subsubsec=\relax
-\let\subsection=\relax
-\let\subsubsection=\relax
-\let\appendix=\relax
-\let\appendixsec=\relax
-\let\appendixsection=\relax
-\let\appendixsubsec=\relax
-\let\appendixsubsection=\relax
-\let\appendixsubsubsec=\relax
-\let\appendixsubsubsection=\relax
-\let\contents=\relax
-\let\smallbook=\relax
-\let\titlepage=\relax
+% @paragraphindent NCHARS
+% We'll use ems for NCHARS, close enough.
+% We cannot implement @paragraphindent asis, though.
+%
+\def\asisword{asis} % no translation, these are keywords
+\def\noneword{none}
+%
+\def\paragraphindent{\parsearg\doparagraphindent}
+\def\doparagraphindent#1{%
+ \def\temp{#1}%
+ \ifx\temp\asisword
+ \else
+ \ifx\temp\noneword
+ \defaultparindent = 0pt
+ \else
+ \defaultparindent = #1em
+ \fi
+ \fi
+ \parindent = \defaultparindent
}
-% Used in nested conditionals, where we have to parse the Texinfo source
-% and so want to turn off most commands, in case they are used
-% incorrectly.
-%
-\def\ignoremorecommands{%
- \let\defcodeindex = \relax
- \let\defcv = \relax
- \let\deffn = \relax
- \let\deffnx = \relax
- \let\defindex = \relax
- \let\defivar = \relax
- \let\defmac = \relax
- \let\defmethod = \relax
- \let\defop = \relax
- \let\defopt = \relax
- \let\defspec = \relax
- \let\deftp = \relax
- \let\deftypefn = \relax
- \let\deftypefun = \relax
- \let\deftypevar = \relax
- \let\deftypevr = \relax
- \let\defun = \relax
- \let\defvar = \relax
- \let\defvr = \relax
- \let\ref = \relax
- \let\xref = \relax
- \let\printindex = \relax
- \let\pxref = \relax
- \let\settitle = \relax
- \let\setchapternewpage = \relax
- \let\setchapterstyle = \relax
- \let\everyheading = \relax
- \let\evenheading = \relax
- \let\oddheading = \relax
- \let\everyfooting = \relax
- \let\evenfooting = \relax
- \let\oddfooting = \relax
- \let\headings = \relax
- \let\include = \relax
- \let\lowersections = \relax
- \let\down = \relax
- \let\raisesections = \relax
- \let\up = \relax
- \let\set = \relax
- \let\clear = \relax
- \let\item = \relax
+% @exampleindent NCHARS
+% We'll use ems for NCHARS like @paragraphindent.
+% It seems @exampleindent asis isn't necessary, but
+% I preserve it to make it similar to @paragraphindent.
+\def\exampleindent{\parsearg\doexampleindent}
+\def\doexampleindent#1{%
+ \def\temp{#1}%
+ \ifx\temp\asisword
+ \else
+ \ifx\temp\noneword
+ \lispnarrowing = 0pt
+ \else
+ \lispnarrowing = #1em
+ \fi
+ \fi
}
-% Ignore @ignore ... @end ignore.
+% @asis just yields its argument. Used with @table, for example.
%
-\def\ignore{\doignore{ignore}}
+\def\asis#1{#1}
-% Ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu, and @direntry text.
+% @math means output in math mode.
+% We don't use $'s directly in the definition of \math because control
+% sequences like \math are expanded when the toc file is written. Then,
+% we read the toc file back, the $'s will be normal characters (as they
+% should be, according to the definition of Texinfo). So we must use a
+% control sequence to switch into and out of math mode.
%
-\def\ifinfo{\doignore{ifinfo}}
-\def\ifhtml{\doignore{ifhtml}}
-\def\ifnottex{\doignore{ifnottex}}
-\def\html{\doignore{html}}
-\def\menu{\doignore{menu}}
-\def\direntry{\doignore{direntry}}
+% This isn't quite enough for @math to work properly in indices, but it
+% seems unlikely it will ever be needed there.
+%
+\let\implicitmath = $
+\def\math#1{\implicitmath #1\implicitmath}
-% @dircategory CATEGORY -- specify a category of the dir file
-% which this file should belong to. Ignore this in TeX.
-\let\dircategory = \comment
+% @bullet and @minus need the same treatment as @math, just above.
+\def\bullet{\implicitmath\ptexbullet\implicitmath}
+\def\minus{\implicitmath-\implicitmath}
-% Ignore text until a line `@end #1'.
+% @refill is a no-op.
+\let\refill=\relax
+
+% If working on a large document in chapters, it is convenient to
+% be able to disable indexing, cross-referencing, and contents, for test runs.
+% This is done with @novalidate (before @setfilename).
%
-\def\doignore#1{\begingroup
- % Don't complain about control sequences we have declared \outer.
- \ignoresections
- %
- % Define a command to swallow text until we reach `@end #1'.
- % This @ is a catcode 12 token (that is the normal catcode of @ in
- % this texinfo.tex file). We change the catcode of @ below to match.
- \long\def\doignoretext##1@end #1{\enddoignore}%
- %
- % Make sure that spaces turn into tokens that match what \doignoretext wants.
- \catcode32 = 10
- %
- % Ignore braces, too, so mismatched braces don't cause trouble.
- \catcode`\{ = 9
- \catcode`\} = 9
- %
- % We must not have @c interpreted as a control sequence.
- \catcode`\@ = 12
- %
- % Make the letter c a comment character so that the rest of the line
- % will be ignored. This way, the document can have (for example)
- % @c @end ifinfo
- % and the @end ifinfo will be properly ignored.
- % (We've just changed @ to catcode 12.)
- \catcode`\c = 14
- %
- % And now expand that command.
- \doignoretext
+\newif\iflinks \linkstrue % by default we want the aux files.
+\let\novalidate = \linksfalse
+
+% @setfilename is done at the beginning of every texinfo file.
+% So open here the files we need to have open while reading the input.
+% This makes it possible to make a .fmt file for texinfo.
+\def\setfilename{%
+ \iflinks
+ \readauxfile
+ \fi % \openindices needs to do some work in any case.
+ \openindices
+ \fixbackslash % Turn off hack to swallow `\input texinfo'.
+ \global\let\setfilename=\comment % Ignore extra @setfilename cmds.
+ %
+ % If texinfo.cnf is present on the system, read it.
+ % Useful for site-wide @afourpaper, etc.
+ % Just to be on the safe side, close the input stream before the \input.
+ \openin 1 texinfo.cnf
+ \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi
+ \closein1
+ \temp
+ %
+ \comment % Ignore the actual filename.
}
-% What we do to finish off ignored text.
+% Called from \setfilename.
%
-\def\enddoignore{\endgroup\ignorespaces}%
-
-\newif\ifwarnedobs\warnedobsfalse
-\def\obstexwarn{%
- \ifwarnedobs\relax\else
- % We need to warn folks that they may have trouble with TeX 3.0.
- % This uses \immediate\write16 rather than \message to get newlines.
- \immediate\write16{}
- \immediate\write16{***WARNING*** for users of Unix TeX 3.0!}
- \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).}
- \immediate\write16{If you are running another version of TeX, relax.}
- \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.}
- \immediate\write16{ Then upgrade your TeX installation if you can.}
- \immediate\write16{ (See ftp://ftp.gnu.org/pub/gnu/TeX.README.)}
- \immediate\write16{If you are stuck with version 3.0, run the}
- \immediate\write16{ script ``tex3patch'' from the Texinfo distribution}
- \immediate\write16{ to use a workaround.}
- \immediate\write16{}
- \global\warnedobstrue
- \fi
+\def\openindices{%
+ \newindex{cp}%
+ \newcodeindex{fn}%
+ \newcodeindex{vr}%
+ \newcodeindex{tp}%
+ \newcodeindex{ky}%
+ \newcodeindex{pg}%
}
-% **In TeX 3.0, setting text in \nullfont hangs tex. For a
-% workaround (which requires the file ``dummy.tfm'' to be installed),
-% uncomment the following line:
-%%%%%\font\nullfont=dummy\let\obstexwarn=\relax
+% @bye.
+\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
-% Ignore text, except that we keep track of conditional commands for
-% purposes of nesting, up to an `@end #1' command.
-%
-\def\nestedignore#1{%
- \obstexwarn
- % We must actually expand the ignored text to look for the @end
- % command, so that nested ignore constructs work. Thus, we put the
- % text into a \vbox and then do nothing with the result. To minimize
- % the change of memory overflow, we follow the approach outlined on
- % page 401 of the TeXbook: make the current font be a dummy font.
- %
- \setbox0 = \vbox\bgroup
- % Don't complain about control sequences we have declared \outer.
- \ignoresections
- %
- % Define `@end #1' to end the box, which will in turn undefine the
- % @end command again.
- \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}%
- %
- % We are going to be parsing Texinfo commands. Most cause no
- % trouble when they are used incorrectly, but some commands do
- % complicated argument parsing or otherwise get confused, so we
- % undefine them.
- %
- % We can't do anything about stray @-signs, unfortunately;
- % they'll produce `undefined control sequence' errors.
- \ignoremorecommands
- %
- % Set the current font to be \nullfont, a TeX primitive, and define
- % all the font commands to also use \nullfont. We don't use
- % dummy.tfm, as suggested in the TeXbook, because not all sites
- % might have that installed. Therefore, math mode will still
- % produce output, but that should be an extremely small amount of
- % stuff compared to the main input.
- %
- \nullfont
- \let\tenrm = \nullfont \let\tenit = \nullfont \let\tensl = \nullfont
- \let\tenbf = \nullfont \let\tentt = \nullfont \let\smallcaps = \nullfont
- \let\tensf = \nullfont
- % Similarly for index fonts (mostly for their use in
- % smallexample)
- \let\indrm = \nullfont \let\indit = \nullfont \let\indsl = \nullfont
- \let\indbf = \nullfont \let\indtt = \nullfont \let\indsc = \nullfont
- \let\indsf = \nullfont
- %
- % Don't complain when characters are missing from the fonts.
- \tracinglostchars = 0
- %
- % Don't bother to do space factor calculations.
- \frenchspacing
- %
- % Don't report underfull hboxes.
- \hbadness = 10000
- %
- % Do minimal line-breaking.
- \pretolerance = 10000
- %
- % Do not execute instructions in @tex
- \def\tex{\doignore{tex}}%
-}
-
-% @set VAR sets the variable VAR to an empty value.
-% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
-%
-% Since we want to separate VAR from REST-OF-LINE (which might be
-% empty), we can't just use \parsearg; we have to insert a space of our
-% own to delimit the rest of the line, and then take it out again if we
-% didn't need it. Make sure the catcode of space is correct to avoid
-% losing inside @example, for instance.
-%
-\def\set{\begingroup\catcode` =10
- \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
- \parsearg\setxxx}
-\def\setxxx#1{\setyyy#1 \endsetyyy}
-\def\setyyy#1 #2\endsetyyy{%
- \def\temp{#2}%
- \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty
- \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted.
- \fi
- \endgroup
-}
-% Can't use \xdef to pre-expand #2 and save some time, since \temp or
-% \next or other control sequences that we've defined might get us into
-% an infinite loop. Consider `@set foo @cite{bar}'.
-\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}}
-
-% @clear VAR clears (i.e., unsets) the variable VAR.
-%
-\def\clear{\parsearg\clearxxx}
-\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax}
-
-% @value{foo} gets the text saved in variable foo.
-%
-\def\value{\begingroup
- \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
- \valuexxx}
-\def\valuexxx#1{\expandablevalue{#1}\endgroup}
-
-% We have this subroutine so that we can handle at least some @value's
-% properly in indexes (we \let\value to this in \indexdummies). Ones
-% whose names contain - or _ still won't work, but we can't do anything
-% about that. The command has to be fully expandable, since the result
-% winds up in the index file. This means that if the variable's value
-% contains other Texinfo commands, it's almost certain it will fail
-% (although perhaps we could fix that with sufficient work to do a
-% one-level expansion on the result, instead of complete).
-%
-\def\expandablevalue#1{%
- \expandafter\ifx\csname SET#1\endcsname\relax
- {[No value for ``#1'']}%
- \else
- \csname SET#1\endcsname
- \fi
-}
-
-% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
-% with @set.
-%
-\def\ifset{\parsearg\ifsetxxx}
-\def\ifsetxxx #1{%
- \expandafter\ifx\csname SET#1\endcsname\relax
- \expandafter\ifsetfail
- \else
- \expandafter\ifsetsucceed
- \fi
-}
-\def\ifsetsucceed{\conditionalsucceed{ifset}}
-\def\ifsetfail{\nestedignore{ifset}}
-\defineunmatchedend{ifset}
-% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
-% defined with @set, or has been undefined with @clear.
-%
-\def\ifclear{\parsearg\ifclearxxx}
-\def\ifclearxxx #1{%
- \expandafter\ifx\csname SET#1\endcsname\relax
- \expandafter\ifclearsucceed
+\message{pdf,}
+% adobe `portable' document format
+\newcount\tempnum
+\newcount\lnkcount
+\newtoks\filename
+\newcount\filenamelength
+\newcount\pgn
+\newtoks\toksA
+\newtoks\toksB
+\newtoks\toksC
+\newtoks\toksD
+\newbox\boxA
+\newcount\countA
+\newif\ifpdf
+\newif\ifpdfmakepagedest
+
+\ifx\pdfoutput\undefined
+ \pdffalse
+ \let\pdfmkdest = \gobble
+ \let\pdfurl = \gobble
+ \let\endlink = \relax
+ \let\linkcolor = \relax
+ \let\pdfmakeoutlines = \relax
+\else
+ \pdftrue
+ \pdfoutput = 1
+ \input pdfcolor
+ \def\dopdfimage#1#2#3{%
+ \def\imagewidth{#2}%
+ \def\imageheight{#3}%
+ \ifnum\pdftexversion < 14
+ \pdfimage
+ \else
+ \pdfximage
+ \fi
+ \ifx\empty\imagewidth\else width \imagewidth \fi
+ \ifx\empty\imageheight\else height \imageheight \fi
+ {#1.pdf}%
+ \ifnum\pdftexversion < 14 \else
+ \pdfrefximage \pdflastximage
+ \fi}
+ \def\pdfmkdest#1{\pdfdest name{#1@} xyz}
+ \def\pdfmkpgn#1{#1@}
+ \let\linkcolor = \Blue % was Cyan, but that seems light?
+ \def\endlink{\Black\pdfendlink}
+ % Adding outlines to PDF; macros for calculating structure of outlines
+ % come from Petr Olsak
+ \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
+ \else \csname#1\endcsname \fi}
+ \def\advancenumber#1{\tempnum=\expnumber{#1}\relax
+ \advance\tempnum by1
+ \expandafter\xdef\csname#1\endcsname{\the\tempnum}}
+ \def\pdfmakeoutlines{{%
+ \openin 1 \jobname.toc
+ \ifeof 1\else\bgroup
+ \closein 1
+ \indexnofonts
+ \def\tt{}
+ \let\_ = \normalunderscore
+ % Thanh's hack / proper braces in bookmarks
+ \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace
+ \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace
+ %
+ \def\chapentry ##1##2##3{}
+ \def\unnumbchapentry ##1##2{}
+ \def\secentry ##1##2##3##4{\advancenumber{chap##2}}
+ \def\unnumbsecentry ##1##2{}
+ \def\subsecentry ##1##2##3##4##5{\advancenumber{sec##2.##3}}
+ \def\unnumbsubsecentry ##1##2{}
+ \def\subsubsecentry ##1##2##3##4##5##6{\advancenumber{subsec##2.##3.##4}}
+ \def\unnumbsubsubsecentry ##1##2{}
+ \input \jobname.toc
+ \def\chapentry ##1##2##3{%
+ \pdfoutline goto name{\pdfmkpgn{##3}}count-\expnumber{chap##2}{##1}}
+ \def\unnumbchapentry ##1##2{%
+ \pdfoutline goto name{\pdfmkpgn{##2}}{##1}}
+ \def\secentry ##1##2##3##4{%
+ \pdfoutline goto name{\pdfmkpgn{##4}}count-\expnumber{sec##2.##3}{##1}}
+ \def\unnumbsecentry ##1##2{%
+ \pdfoutline goto name{\pdfmkpgn{##2}}{##1}}
+ \def\subsecentry ##1##2##3##4##5{%
+ \pdfoutline goto name{\pdfmkpgn{##5}}count-\expnumber{subsec##2.##3.##4}{##1}}
+ \def\unnumbsubsecentry ##1##2{%
+ \pdfoutline goto name{\pdfmkpgn{##2}}{##1}}
+ \def\subsubsecentry ##1##2##3##4##5##6{%
+ \pdfoutline goto name{\pdfmkpgn{##6}}{##1}}
+ \def\unnumbsubsubsecentry ##1##2{%
+ \pdfoutline goto name{\pdfmkpgn{##2}}{##1}}
+ \input \jobname.toc
+ \egroup\fi
+ }}
+ \def\makelinks #1,{%
+ \def\params{#1}\def\E{END}%
+ \ifx\params\E
+ \let\nextmakelinks=\relax
+ \else
+ \let\nextmakelinks=\makelinks
+ \ifnum\lnkcount>0,\fi
+ \picknum{#1}%
+ \startlink attr{/Border [0 0 0]}
+ goto name{\pdfmkpgn{\the\pgn}}%
+ \linkcolor #1%
+ \advance\lnkcount by 1%
+ \endlink
+ \fi
+ \nextmakelinks
+ }
+ \def\picknum#1{\expandafter\pn#1}
+ \def\pn#1{%
+ \def\p{#1}%
+ \ifx\p\lbrace
+ \let\nextpn=\ppn
+ \else
+ \let\nextpn=\ppnn
+ \def\first{#1}
+ \fi
+ \nextpn
+ }
+ \def\ppn#1{\pgn=#1\gobble}
+ \def\ppnn{\pgn=\first}
+ \def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,}
+ \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
+ \def\skipspaces#1{\def\PP{#1}\def\D{|}%
+ \ifx\PP\D\let\nextsp\relax
+ \else\let\nextsp\skipspaces
+ \ifx\p\space\else\addtokens{\filename}{\PP}%
+ \advance\filenamelength by 1
+ \fi
+ \fi
+ \nextsp}
+ \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax}
+ \ifnum\pdftexversion < 14
+ \let \startlink \pdfannotlink
\else
- \expandafter\ifclearfail
+ \let \startlink \pdfstartlink
\fi
-}
-\def\ifclearsucceed{\conditionalsucceed{ifclear}}
-\def\ifclearfail{\nestedignore{ifclear}}
-\defineunmatchedend{ifclear}
-
-% @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text
-% following, through the first @end iftex (etc.). Make `@end iftex'
-% (etc.) valid only after an @iftex.
-%
-\def\iftex{\conditionalsucceed{iftex}}
-\def\ifnothtml{\conditionalsucceed{ifnothtml}}
-\def\ifnotinfo{\conditionalsucceed{ifnotinfo}}
-\defineunmatchedend{iftex}
-\defineunmatchedend{ifnothtml}
-\defineunmatchedend{ifnotinfo}
-
-% We can't just want to start a group at @iftex (for example) and end it
-% at @end iftex, since then @set commands inside the conditional have no
-% effect (they'd get reverted at the end of the group). So we must
-% define \Eiftex to redefine itself to be its previous value. (We can't
-% just define it to fail again with an ``unmatched end'' error, since
-% the @ifset might be nested.)
-%
-\def\conditionalsucceed#1{%
- \edef\temp{%
- % Remember the current value of \E#1.
- \let\nece{prevE#1} = \nece{E#1}%
- %
- % At the `@end #1', redefine \E#1 to be its previous value.
- \def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}%
- }%
- \temp
-}
-
-% We need to expand lots of \csname's, but we don't want to expand the
-% control sequences after we've constructed them.
-%
-\def\nece#1{\expandafter\noexpand\csname#1\endcsname}
-
-% @asis just yields its argument. Used with @table, for example.
-%
-\def\asis#1{#1}
-
-% @math means output in math mode.
-% We don't use $'s directly in the definition of \math because control
-% sequences like \math are expanded when the toc file is written. Then,
-% we read the toc file back, the $'s will be normal characters (as they
-% should be, according to the definition of Texinfo). So we must use a
-% control sequence to switch into and out of math mode.
-%
-% This isn't quite enough for @math to work properly in indices, but it
-% seems unlikely it will ever be needed there.
-%
-\let\implicitmath = $
-\def\math#1{\implicitmath #1\implicitmath}
-
-% @bullet and @minus need the same treatment as @math, just above.
-\def\bullet{\implicitmath\ptexbullet\implicitmath}
-\def\minus{\implicitmath-\implicitmath}
-
-\def\node{\ENVcheck\parsearg\nodezzz}
-\def\nodezzz#1{\nodexxx [#1,]}
-\def\nodexxx[#1,#2]{\gdef\lastnode{#1}}
-\let\nwnode=\node
-\let\lastnode=\relax
-
-\def\donoderef{\ifx\lastnode\relax\else
-\expandafter\expandafter\expandafter\setref{\lastnode}\fi
-\global\let\lastnode=\relax}
-
-\def\unnumbnoderef{\ifx\lastnode\relax\else
-\expandafter\expandafter\expandafter\unnumbsetref{\lastnode}\fi
-\global\let\lastnode=\relax}
-
-\def\appendixnoderef{\ifx\lastnode\relax\else
-\expandafter\expandafter\expandafter\appendixsetref{\lastnode}\fi
-\global\let\lastnode=\relax}
-
-% @refill is a no-op.
-\let\refill=\relax
-
-% If working on a large document in chapters, it is convenient to
-% be able to disable indexing, cross-referencing, and contents, for test runs.
-% This is done with @novalidate (before @setfilename).
-%
-\newif\iflinks \linkstrue % by default we want the aux files.
-\let\novalidate = \linksfalse
-
-% @setfilename is done at the beginning of every texinfo file.
-% So open here the files we need to have open while reading the input.
-% This makes it possible to make a .fmt file for texinfo.
-\def\setfilename{%
- \iflinks
- \readauxfile
- \opencontents
- \fi % \openindices needs to do some work in any case.
- \openindices
- \fixbackslash % Turn off hack to swallow `\input texinfo'.
- \global\let\setfilename=\comment % Ignore extra @setfilename cmds.
- %
- % If texinfo.cnf is present on the system, read it.
- % Useful for site-wide @afourpaper, etc.
- % Just to be on the safe side, close the input stream before the \input.
- \openin 1 texinfo.cnf
- \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi
- \closein1
- \temp
- %
- \comment % Ignore the actual filename.
-}
-
-% Called from \setfilename.
-%
-\def\openindices{%
- \newindex{cp}%
- \newcodeindex{fn}%
- \newcodeindex{vr}%
- \newcodeindex{tp}%
- \newcodeindex{ky}%
- \newcodeindex{pg}%
-}
-
-% @bye.
-\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
+ \def\pdfurl#1{%
+ \begingroup
+ \normalturnoffactive\def\@{@}%
+ \leavevmode\Red
+ \startlink attr{/Border [0 0 0]}%
+ user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
+ % #1
+ \endgroup}
+ \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
+ \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
+ \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
+ \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
+ \def\maketoks{%
+ \expandafter\poptoks\the\toksA|ENDTOKS|
+ \ifx\first0\adn0
+ \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
+ \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
+ \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
+ \else
+ \ifnum0=\countA\else\makelink\fi
+ \ifx\first.\let\next=\done\else
+ \let\next=\maketoks
+ \addtokens{\toksB}{\the\toksD}
+ \ifx\first,\addtokens{\toksB}{\space}\fi
+ \fi
+ \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
+ \next}
+ \def\makelink{\addtokens{\toksB}%
+ {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
+ \def\pdflink#1{%
+ \startlink attr{/Border [0 0 0]} goto name{\mkpgn{#1}}
+ \linkcolor #1\endlink}
+ \def\mkpgn#1{#1@}
+ \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
+\fi % \ifx\pdfoutput
\message{fonts,}
@@ -1184,22 +1114,17 @@ where each line of input produces a line of output.}
\setfont\deftt\ttshape{10}{\magstep1}
\def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf}
-% Fonts for indices and small examples (9pt).
-% We actually use the slanted font rather than the italic,
-% because texinfo normally uses the slanted fonts for that.
-% Do not make many font distinctions in general in the index, since they
-% aren't very useful.
-\setfont\ninett\ttshape{9}{1000}
-\setfont\indrm\rmshape{9}{1000}
-\setfont\indit\slshape{9}{1000}
-\let\indsl=\indit
-\let\indtt=\ninett
-\let\indttsl=\ninett
-\let\indsf=\indrm
-\let\indbf=\indrm
-\setfont\indsc\scshape{10}{900}
-\font\indi=cmmi9
-\font\indsy=cmsy9
+% Fonts for indices, footnotes, small examples (9pt).
+\setfont\smallrm\rmshape{9}{1000}
+\setfont\smalltt\ttshape{9}{1000}
+\setfont\smallbf\bfshape{10}{900}
+\setfont\smallit\itshape{9}{1000}
+\setfont\smallsl\slshape{9}{1000}
+\setfont\smallsf\sfshape{9}{1000}
+\setfont\smallsc\scshape{10}{900}
+\setfont\smallttsl\ttslshape{10}{900}
+\font\smalli=cmmi9
+\font\smallsy=cmsy9
% Fonts for title page:
\setfont\titlerm\rmbshape{12}{\magstep3}
@@ -1313,11 +1238,12 @@ where each line of input produces a line of output.}
\let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl
\resetmathfonts \setleading{15pt}}
\let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf?
-\def\indexfonts{%
- \let\tenrm=\indrm \let\tenit=\indit \let\tensl=\indsl
- \let\tenbf=\indbf \let\tentt=\indtt \let\smallcaps=\indsc
- \let\tensf=\indsf \let\teni=\indi \let\tensy=\indsy \let\tenttsl=\indttsl
- \resetmathfonts \setleading{12pt}}
+\def\smallfonts{%
+ \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl
+ \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
+ \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
+ \let\tenttsl=\smallttsl
+ \resetmathfonts \setleading{11pt}}
% Set up the default fonts, so we can use them for creating boxes.
%
@@ -1341,13 +1267,14 @@ where each line of input produces a line of output.}
% \smartitalic{ARG} outputs arg in italics, followed by an italic correction
% unless the following character is such as not to need one.
\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else\/\fi\fi\fi}
-\def\smartitalic#1{{\sl #1}\futurelet\next\smartitalicx}
+\def\smartslanted#1{{\sl #1}\futurelet\next\smartitalicx}
+\def\smartitalic#1{{\it #1}\futurelet\next\smartitalicx}
\let\i=\smartitalic
-\let\var=\smartitalic
-\let\dfn=\smartitalic
+\let\var=\smartslanted
+\let\dfn=\smartslanted
\let\emph=\smartitalic
-\let\cite=\smartitalic
+\let\cite=\smartslanted
\def\b#1{{\bf #1}}
\let\strong=\b
@@ -1365,9 +1292,9 @@ where each line of input produces a line of output.}
}
\let\ttfont=\t
\def\samp#1{`\tclose{#1}'\null}
-\setfont\smallrm\rmshape{8}{1000}
-\font\smallsy=cmsy9
-\def\key#1{{\smallrm\textfont2=\smallsy \leavevmode\hbox{%
+\setfont\keyrm\rmshape{8}{1000}
+\font\keysy=cmsy9
+\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
\raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
\vbox{\hrule\kern-0.4pt
\hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
@@ -1377,7 +1304,9 @@ where each line of input produces a line of output.}
%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
\def\ctrl #1{{\tt \rawbackslash \hat}#1}
+% @file, @option are the same as @samp.
\let\file=\samp
+\let\option=\samp
% @code is a modification of @t,
% which makes spaces the same size as normal in the surrounding text.
@@ -1412,20 +1341,18 @@ where each line of input produces a line of output.}
% and arrange explicitly to hyphenate at a dash.
% -- rms.
{
-\catcode`\-=\active
-\catcode`\_=\active
-\catcode`\|=\active
-\global\def\code{\begingroup \catcode`\-=\active \let-\codedash \catcode`\_=\active \let_\codeunder \codex}
-% The following is used by \doprintindex to insure that long function names
-% wrap around. It is necessary for - and _ to be active before the index is
-% read from the file, as \entry parses the arguments long before \code is
-% ever called. -- mycroft
-% _ is always active; and it shouldn't be \let = to an _ that is a
-% subscript character anyway. Then, @cindex @samp{_} (for example)
-% fails. --karl
-\global\def\indexbreaks{%
- \catcode`\-=\active \let-\realdash
-}
+ \catcode`\-=\active
+ \catcode`\_=\active
+ %
+ \global\def\code{\begingroup
+ \catcode`\-=\active \let-\codedash
+ \catcode`\_=\active \let_\codeunder
+ \codex
+ }
+ %
+ % If we end up with any active - characters when handling the index,
+ % just treat them as a normal -.
+ \global\def\indexbreaks{\catcode`\-=\active \let-\realdash}
}
\def\realdash{-}
@@ -1466,27 +1393,55 @@ where each line of input produces a line of output.}
\else{\tclose{\kbdfont\look}}\fi
\else{\tclose{\kbdfont\look}}\fi}
-% @url. Quotes do not seem necessary, so use \code.
+% For @url, @env, @command quotes seem unnecessary, so use \code.
\let\url=\code
-
-% @uref (abbreviation for `urlref') takes an optional second argument
-% specifying the text to display. First (mandatory) arg is the url.
-% Perhaps eventually put in a hypertex \special here.
-%
-\def\uref#1{\urefxxx #1,,\finish}
-\def\urefxxx#1,#2,#3\finish{%
- \setbox0 = \hbox{\ignorespaces #2}%
+\let\env=\code
+\let\command=\code
+
+% @uref (abbreviation for `urlref') takes an optional (comma-separated)
+% second argument specifying the text to display and an optional third
+% arg as text to display instead of (rather than in addition to) the url
+% itself. First (mandatory) arg is the url. Perhaps eventually put in
+% a hypertex \special here.
+%
+\def\uref#1{\douref #1,,,\finish}
+\def\douref#1,#2,#3,#4\finish{\begingroup
+ \unsepspaces
+ \pdfurl{#1}%
+ \setbox0 = \hbox{\ignorespaces #3}%
\ifdim\wd0 > 0pt
- \unhbox0\ (\code{#1})%
+ \unhbox0 % third arg given, show only that
\else
- \code{#1}%
+ \setbox0 = \hbox{\ignorespaces #2}%
+ \ifdim\wd0 > 0pt
+ \ifpdf
+ \unhbox0 % PDF: 2nd arg given, show only it
+ \else
+ \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url
+ \fi
+ \else
+ \code{#1}% only url given, so show it
+ \fi
\fi
-}
+ \endlink
+\endgroup}
-% rms does not like the angle brackets --karl, 17may97.
-% So now @email is just like @uref.
+% rms does not like angle brackets --karl, 17may97.
+% So now @email is just like @uref, unless we are pdf.
+%
%\def\email#1{\angleleft{\tt #1}\angleright}
-\let\email=\uref
+\ifpdf
+ \def\email#1{\doemail#1,,\finish}
+ \def\doemail#1,#2,#3\finish{\begingroup
+ \unsepspaces
+ \pdfurl{mailto:#1}%
+ \setbox0 = \hbox{\ignorespaces #2}%
+ \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi
+ \endlink
+ \endgroup}
+\else
+ \let\email=\uref
+\fi
% Check if we are currently using a typewriter font. Since all the
% Computer Modern typewriter fonts have zero interword stretch (and
@@ -1496,8 +1451,7 @@ where each line of input produces a line of output.}
\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
% Typeset a dimension, e.g., `in' or `pt'. The only reason for the
-% argument is to make the input look right: @dmn{pt} instead of
-% @dmn{}pt.
+% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
%
\def\dmn#1{\thinspace #1}
@@ -1508,11 +1462,14 @@ where each line of input produces a line of output.}
% Polish suppressed-l. --karl, 22sep96.
%\def\l#1{{\li #1}\null}
+% Explicit font changes: @r, @sc, undocumented @ii.
\def\r#1{{\rm #1}} % roman font
-% Use of \lowercase was suggested.
\def\sc#1{{\smallcaps#1}} % smallcaps font
\def\ii#1{{\it #1}} % italic font
+% @acronym downcases the argument and prints in smallcaps.
+\def\acronym#1{{\smallcaps \lowercase{#1}}}
+
% @pounds{} is a sterling sign.
\def\pounds{{\it\$}}
@@ -1526,15 +1483,20 @@ where each line of input produces a line of output.}
\newif\ifseenauthor
\newif\iffinishedtitlepage
+% Do an implicit @contents or @shortcontents after @end titlepage if the
+% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage.
+%
+\newif\ifsetcontentsaftertitlepage
+ \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue
+\newif\ifsetshortcontentsaftertitlepage
+ \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
+
\def\shorttitlepage{\parsearg\shorttitlepagezzz}
\def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
\endgroup\page\hbox{}\page}
\def\titlepage{\begingroup \parindent=0pt \textfonts
\let\subtitlerm=\tenrm
-% I deinstalled the following change because \cmr12 is undefined.
-% This change was not in the ChangeLog anyway. --rms.
-% \let\subtitlerm=\cmr12
\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}%
%
\def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines}%
@@ -1583,6 +1545,23 @@ where each line of input produces a line of output.}
% after the title page, which we certainly don't want.
\oldpage
\endgroup
+ %
+ % If they want short, they certainly want long too.
+ \ifsetshortcontentsaftertitlepage
+ \shortcontents
+ \contents
+ \global\let\shortcontents = \relax
+ \global\let\contents = \relax
+ \fi
+ %
+ \ifsetcontentsaftertitlepage
+ \contents
+ \global\let\contents = \relax
+ \global\let\shortcontents = \relax
+ \fi
+ %
+ \ifpdf \pdfmakepagedesttrue \fi
+ %
\HEADINGSon
}
@@ -1596,10 +1575,10 @@ where each line of input produces a line of output.}
\let\thispage=\folio
-\newtoks \evenheadline % Token sequence for heading line of even pages
-\newtoks \oddheadline % Token sequence for heading line of odd pages
-\newtoks \evenfootline % Token sequence for footing line of even pages
-\newtoks \oddfootline % Token sequence for footing line of odd pages
+\newtoks\evenheadline % headline on even pages
+\newtoks\oddheadline % headline on odd pages
+\newtoks\evenfootline % footline on even pages
+\newtoks\oddfootline % footline on odd pages
% Now make Tex use those variables
\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
@@ -1716,23 +1695,23 @@ where each line of input produces a line of output.}
}
% Subroutines used in generating headings
-% Produces Day Month Year style of output.
-\def\today{\number\day\space
-\ifcase\month\or
-January\or February\or March\or April\or May\or June\or
-July\or August\or September\or October\or November\or December\fi
-\space\number\year}
-
-% Use this if you want the Month Day, Year style of output.
-%\def\today{\ifcase\month\or
-%January\or February\or March\or April\or May\or June\or
-%July\or August\or September\or October\or November\or December\fi
-%\space\number\day, \number\year}
-
-% @settitle line... specifies the title of the document, for headings
-% It generates no output of its own
-
-\def\thistitle{No Title}
+% This produces Day Month Year style of output.
+% Only define if not already defined, in case a txi-??.tex file has set
+% up a different format (e.g., txi-cs.tex does this).
+\ifx\today\undefined
+\def\today{%
+ \number\day\space
+ \ifcase\month
+ \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr
+ \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug
+ \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec
+ \fi
+ \space\number\year}
+\fi
+
+% @settitle line... specifies the title of the document, for headings.
+% It generates no output of its own.
+\def\thistitle{\putwordNoTitle}
\def\settitle{\parsearg\settitlezzz}
\def\settitlezzz #1{\gdef\thistitle{#1}}
@@ -1781,11 +1760,6 @@ July\or August\or September\or October\or November\or December\fi
\itemindex{#1}%
\nobreak % This prevents a break before @itemx.
%
- % Be sure we are not still in the middle of a paragraph.
- %{\parskip = 0in
- %\par
- %}%
- %
% If the item text does not fit in the space we have, put it on a line
% by itself, and do not allow a page break either before or after that
% line. We do not start a paragraph here because then if the next
@@ -1814,13 +1788,17 @@ July\or August\or September\or October\or November\or December\fi
\itemxneedsnegativevskipfalse
\else
% The item text fits into the space. Start a paragraph, so that the
- % following text (if any) will end up on the same line. Since that
- % text will be indented by \tableindent, we make the item text be in
- % a zero-width box.
+ % following text (if any) will end up on the same line.
\noindent
- \rlap{\hskip -\tableindent\box0}\ignorespaces%
- \endgroup%
- \itemxneedsnegativevskiptrue%
+ % Do this with kerns and \unhbox so that if there is a footnote in
+ % the item text, it can migrate to the main vertical list and
+ % eventually be printed.
+ \nobreak\kern-\tableindent
+ \dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0
+ \unhbox0
+ \nobreak\kern\dimen0
+ \endgroup
+ \itemxneedsnegativevskiptrue
\fi
}
@@ -1831,9 +1809,10 @@ July\or August\or September\or October\or November\or December\fi
\def\xitem{\errmessage{@xitem while not in a table}}
\def\xitemx{\errmessage{@xitemx while not in a table}}
-%% Contains a kludge to get @end[description] to work
+% Contains a kludge to get @end[description] to work.
\def\description{\tablez{\dontindex}{1}{}{}{}{}}
+% @table, @ftable, @vtable.
\def\table{\begingroup\inENV\obeylines\obeyspaces\tablex}
{\obeylines\obeyspaces%
\gdef\tablex #1^^M{%
@@ -2106,46 +2085,60 @@ July\or August\or September\or October\or November\or December\fi
\multitablelinespace=0pt
% Macros used to set up halign preamble:
-%
+%
\let\endsetuptable\relax
\def\xendsetuptable{\endsetuptable}
\let\columnfractions\relax
\def\xcolumnfractions{\columnfractions}
\newif\ifsetpercent
-% 2/1/96, to allow fractions to be given with more than one digit.
-\def\pickupwholefraction#1 {\global\advance\colcount by1 %
-\expandafter\xdef\csname col\the\colcount\endcsname{.#1\hsize}%
-\setuptable}
+% #1 is the part of the @columnfraction before the decimal point, which
+% is presumably either 0 or the empty string (but we don't check, we
+% just throw it away). #2 is the decimal part, which we use as the
+% percent of \hsize for this column.
+\def\pickupwholefraction#1.#2 {%
+ \global\advance\colcount by 1
+ \expandafter\xdef\csname col\the\colcount\endcsname{.#2\hsize}%
+ \setuptable
+}
\newcount\colcount
-\def\setuptable#1{\def\firstarg{#1}%
-\ifx\firstarg\xendsetuptable\let\go\relax%
-\else
- \ifx\firstarg\xcolumnfractions\global\setpercenttrue%
+\def\setuptable#1{%
+ \def\firstarg{#1}%
+ \ifx\firstarg\xendsetuptable
+ \let\go = \relax
\else
- \ifsetpercent
- \let\go\pickupwholefraction % In this case arg of setuptable
- % is the decimal point before the
- % number given in percent of hsize.
- % We don't need this so we don't use it.
+ \ifx\firstarg\xcolumnfractions
+ \global\setpercenttrue
+ \else
+ \ifsetpercent
+ \let\go\pickupwholefraction
+ \else
+ \global\advance\colcount by 1
+ \setbox0=\hbox{#1\unskip }% Add a normal word space as a separator;
+ % typically that is always in the input, anyway.
+ \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
+ \fi
+ \fi
+ \ifx\go\pickupwholefraction
+ % Put the argument back for the \pickupwholefraction call, so
+ % we'll always have a period there to be parsed.
+ \def\go{\pickupwholefraction#1}%
\else
- \global\advance\colcount by1
- \setbox0=\hbox{#1 }% Add a normal word space as a separator;
- % typically that is always in the input, anyway.
- \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
+ \let\go = \setuptable
\fi%
- \fi%
-\ifx\go\pickupwholefraction\else\let\go\setuptable\fi%
-\fi\go}
+ \fi
+ \go
+}
-% multitable syntax
-\def\tab{&\hskip1sp\relax} % 2/2/96
- % tiny skip here makes sure this column space is
- % maintained, even if it is never used.
+% This used to have \hskip1sp. But then the space in a template line is
+% not enough. That is bad. So let's go back to just & until we
+% encounter the problem it was intended to solve again.
+% --karl, nathan@acm.org, 20apr99.
+\def\tab{&}
% @multitable ... @end multitable definitions:
-
+%
\def\multitable{\parsearg\dotable}
\def\dotable#1{\bgroup
\vskip\parskip
@@ -2184,15 +2177,15 @@ July\or August\or September\or October\or November\or December\fi
% In order to keep entries from bumping into each other
% we will add a \leftskip of \multitablecolspace to all columns after
% the first one.
- %
+ %
% If a template has been used, we will add \multitablecolspace
% to the width of each template entry.
- %
+ %
% If the user has set preamble in terms of percent of \hsize we will
% use that dimension as the width of the column, and the \leftskip
% will keep entries from bumping into each other. Table will start at
% left margin and final column will justify at right margin.
- %
+ %
% Make sure we don't inherit \rightskip from the outer environment.
\rightskip=0pt
\ifnum\colcount=1
@@ -2223,15 +2216,18 @@ July\or August\or September\or October\or November\or December\fi
% If so, do nothing. If not, give it an appropriate dimension based on
% current baselineskip.
\ifdim\multitablelinespace=0pt
+\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
+\global\advance\multitablelinespace by-\ht0
%% strut to put in table in case some entry doesn't have descenders,
%% to keep lines equally spaced
\let\multistrut = \strut
-%% Test to see if parskip is larger than space between lines of
-%% table. If not, do nothing.
-%% If so, set to same dimension as multitablelinespace.
\else
+%% FIXME: what is \box0 supposed to be?
\gdef\multistrut{\vrule height\multitablelinespace depth\dp0
width0pt\relax} \fi
+%% Test to see if parskip is larger than space between lines of
+%% table. If not, do nothing.
+%% If so, set to same dimension as multitablelinespace.
\ifdim\multitableparskip>\multitablelinespace
\global\multitableparskip=\multitablelinespace
\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
@@ -2244,6 +2240,356 @@ width0pt\relax} \fi
\fi}
+\message{conditionals,}
+% Prevent errors for section commands.
+% Used in @ignore and in failing conditionals.
+\def\ignoresections{%
+ \let\chapter=\relax
+ \let\unnumbered=\relax
+ \let\top=\relax
+ \let\unnumberedsec=\relax
+ \let\unnumberedsection=\relax
+ \let\unnumberedsubsec=\relax
+ \let\unnumberedsubsection=\relax
+ \let\unnumberedsubsubsec=\relax
+ \let\unnumberedsubsubsection=\relax
+ \let\section=\relax
+ \let\subsec=\relax
+ \let\subsubsec=\relax
+ \let\subsection=\relax
+ \let\subsubsection=\relax
+ \let\appendix=\relax
+ \let\appendixsec=\relax
+ \let\appendixsection=\relax
+ \let\appendixsubsec=\relax
+ \let\appendixsubsection=\relax
+ \let\appendixsubsubsec=\relax
+ \let\appendixsubsubsection=\relax
+ \let\contents=\relax
+ \let\smallbook=\relax
+ \let\titlepage=\relax
+}
+
+% Used in nested conditionals, where we have to parse the Texinfo source
+% and so want to turn off most commands, in case they are used
+% incorrectly.
+%
+\def\ignoremorecommands{%
+ \let\defcodeindex = \relax
+ \let\defcv = \relax
+ \let\deffn = \relax
+ \let\deffnx = \relax
+ \let\defindex = \relax
+ \let\defivar = \relax
+ \let\defmac = \relax
+ \let\defmethod = \relax
+ \let\defop = \relax
+ \let\defopt = \relax
+ \let\defspec = \relax
+ \let\deftp = \relax
+ \let\deftypefn = \relax
+ \let\deftypefun = \relax
+ \let\deftypeivar = \relax
+ \let\deftypeop = \relax
+ \let\deftypevar = \relax
+ \let\deftypevr = \relax
+ \let\defun = \relax
+ \let\defvar = \relax
+ \let\defvr = \relax
+ \let\ref = \relax
+ \let\xref = \relax
+ \let\printindex = \relax
+ \let\pxref = \relax
+ \let\settitle = \relax
+ \let\setchapternewpage = \relax
+ \let\setchapterstyle = \relax
+ \let\everyheading = \relax
+ \let\evenheading = \relax
+ \let\oddheading = \relax
+ \let\everyfooting = \relax
+ \let\evenfooting = \relax
+ \let\oddfooting = \relax
+ \let\headings = \relax
+ \let\include = \relax
+ \let\lowersections = \relax
+ \let\down = \relax
+ \let\raisesections = \relax
+ \let\up = \relax
+ \let\set = \relax
+ \let\clear = \relax
+ \let\item = \relax
+}
+
+% Ignore @ignore ... @end ignore.
+%
+\def\ignore{\doignore{ignore}}
+
+% Ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu, and @direntry text.
+%
+\def\ifinfo{\doignore{ifinfo}}
+\def\ifhtml{\doignore{ifhtml}}
+\def\ifnottex{\doignore{ifnottex}}
+\def\html{\doignore{html}}
+\def\menu{\doignore{menu}}
+\def\direntry{\doignore{direntry}}
+
+% @dircategory CATEGORY -- specify a category of the dir file
+% which this file should belong to. Ignore this in TeX.
+\let\dircategory = \comment
+
+% Ignore text until a line `@end #1'.
+%
+\def\doignore#1{\begingroup
+ % Don't complain about control sequences we have declared \outer.
+ \ignoresections
+ %
+ % Define a command to swallow text until we reach `@end #1'.
+ % This @ is a catcode 12 token (that is the normal catcode of @ in
+ % this texinfo.tex file). We change the catcode of @ below to match.
+ \long\def\doignoretext##1@end #1{\enddoignore}%
+ %
+ % Make sure that spaces turn into tokens that match what \doignoretext wants.
+ \catcode32 = 10
+ %
+ % Ignore braces, too, so mismatched braces don't cause trouble.
+ \catcode`\{ = 9
+ \catcode`\} = 9
+ %
+ % We must not have @c interpreted as a control sequence.
+ \catcode`\@ = 12
+ %
+ % Make the letter c a comment character so that the rest of the line
+ % will be ignored. This way, the document can have (for example)
+ % @c @end ifinfo
+ % and the @end ifinfo will be properly ignored.
+ % (We've just changed @ to catcode 12.)
+ \catcode`\c = 14
+ %
+ % And now expand that command.
+ \doignoretext
+}
+
+% What we do to finish off ignored text.
+%
+\def\enddoignore{\endgroup\ignorespaces}%
+
+\newif\ifwarnedobs\warnedobsfalse
+\def\obstexwarn{%
+ \ifwarnedobs\relax\else
+ % We need to warn folks that they may have trouble with TeX 3.0.
+ % This uses \immediate\write16 rather than \message to get newlines.
+ \immediate\write16{}
+ \immediate\write16{WARNING: for users of Unix TeX 3.0!}
+ \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).}
+ \immediate\write16{If you are running another version of TeX, relax.}
+ \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.}
+ \immediate\write16{ Then upgrade your TeX installation if you can.}
+ \immediate\write16{ (See ftp://ftp.gnu.org/pub/gnu/TeX.README.)}
+ \immediate\write16{If you are stuck with version 3.0, run the}
+ \immediate\write16{ script ``tex3patch'' from the Texinfo distribution}
+ \immediate\write16{ to use a workaround.}
+ \immediate\write16{}
+ \global\warnedobstrue
+ \fi
+}
+
+% **In TeX 3.0, setting text in \nullfont hangs tex. For a
+% workaround (which requires the file ``dummy.tfm'' to be installed),
+% uncomment the following line:
+%%%%%\font\nullfont=dummy\let\obstexwarn=\relax
+
+% Ignore text, except that we keep track of conditional commands for
+% purposes of nesting, up to an `@end #1' command.
+%
+\def\nestedignore#1{%
+ \obstexwarn
+ % We must actually expand the ignored text to look for the @end
+ % command, so that nested ignore constructs work. Thus, we put the
+ % text into a \vbox and then do nothing with the result. To minimize
+ % the change of memory overflow, we follow the approach outlined on
+ % page 401 of the TeXbook: make the current font be a dummy font.
+ %
+ \setbox0 = \vbox\bgroup
+ % Don't complain about control sequences we have declared \outer.
+ \ignoresections
+ %
+ % Define `@end #1' to end the box, which will in turn undefine the
+ % @end command again.
+ \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}%
+ %
+ % We are going to be parsing Texinfo commands. Most cause no
+ % trouble when they are used incorrectly, but some commands do
+ % complicated argument parsing or otherwise get confused, so we
+ % undefine them.
+ %
+ % We can't do anything about stray @-signs, unfortunately;
+ % they'll produce `undefined control sequence' errors.
+ \ignoremorecommands
+ %
+ % Set the current font to be \nullfont, a TeX primitive, and define
+ % all the font commands to also use \nullfont. We don't use
+ % dummy.tfm, as suggested in the TeXbook, because not all sites
+ % might have that installed. Therefore, math mode will still
+ % produce output, but that should be an extremely small amount of
+ % stuff compared to the main input.
+ %
+ \nullfont
+ \let\tenrm=\nullfont \let\tenit=\nullfont \let\tensl=\nullfont
+ \let\tenbf=\nullfont \let\tentt=\nullfont \let\smallcaps=\nullfont
+ \let\tensf=\nullfont
+ % Similarly for index fonts (mostly for their use in smallexample).
+ \let\smallrm=\nullfont \let\smallit=\nullfont \let\smallsl=\nullfont
+ \let\smallbf=\nullfont \let\smalltt=\nullfont \let\smallsc=\nullfont
+ \let\smallsf=\nullfont
+ %
+ % Don't complain when characters are missing from the fonts.
+ \tracinglostchars = 0
+ %
+ % Don't bother to do space factor calculations.
+ \frenchspacing
+ %
+ % Don't report underfull hboxes.
+ \hbadness = 10000
+ %
+ % Do minimal line-breaking.
+ \pretolerance = 10000
+ %
+ % Do not execute instructions in @tex
+ \def\tex{\doignore{tex}}%
+ % Do not execute macro definitions.
+ % `c' is a comment character, so the word `macro' will get cut off.
+ \def\macro{\doignore{ma}}%
+}
+
+% @set VAR sets the variable VAR to an empty value.
+% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
+%
+% Since we want to separate VAR from REST-OF-LINE (which might be
+% empty), we can't just use \parsearg; we have to insert a space of our
+% own to delimit the rest of the line, and then take it out again if we
+% didn't need it. Make sure the catcode of space is correct to avoid
+% losing inside @example, for instance.
+%
+\def\set{\begingroup\catcode` =10
+ \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
+ \parsearg\setxxx}
+\def\setxxx#1{\setyyy#1 \endsetyyy}
+\def\setyyy#1 #2\endsetyyy{%
+ \def\temp{#2}%
+ \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty
+ \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted.
+ \fi
+ \endgroup
+}
+% Can't use \xdef to pre-expand #2 and save some time, since \temp or
+% \next or other control sequences that we've defined might get us into
+% an infinite loop. Consider `@set foo @cite{bar}'.
+\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}}
+
+% @clear VAR clears (i.e., unsets) the variable VAR.
+%
+\def\clear{\parsearg\clearxxx}
+\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax}
+
+% @value{foo} gets the text saved in variable foo.
+{
+ \catcode`\_ = \active
+ %
+ % We might end up with active _ or - characters in the argument if
+ % we're called from @code, as @code{@value{foo-bar_}}. So \let any
+ % such active characters to their normal equivalents.
+ \gdef\value{\begingroup
+ \catcode`\-=12 \catcode`\_=12
+ \indexbreaks \let_\normalunderscore
+ \valuexxx}
+}
+\def\valuexxx#1{\expandablevalue{#1}\endgroup}
+
+% We have this subroutine so that we can handle at least some @value's
+% properly in indexes (we \let\value to this in \indexdummies). Ones
+% whose names contain - or _ still won't work, but we can't do anything
+% about that. The command has to be fully expandable, since the result
+% winds up in the index file. This means that if the variable's value
+% contains other Texinfo commands, it's almost certain it will fail
+% (although perhaps we could fix that with sufficient work to do a
+% one-level expansion on the result, instead of complete).
+%
+\def\expandablevalue#1{%
+ \expandafter\ifx\csname SET#1\endcsname\relax
+ {[No value for ``#1'']}%
+ \else
+ \csname SET#1\endcsname
+ \fi
+}
+
+% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
+% with @set.
+%
+\def\ifset{\parsearg\ifsetxxx}
+\def\ifsetxxx #1{%
+ \expandafter\ifx\csname SET#1\endcsname\relax
+ \expandafter\ifsetfail
+ \else
+ \expandafter\ifsetsucceed
+ \fi
+}
+\def\ifsetsucceed{\conditionalsucceed{ifset}}
+\def\ifsetfail{\nestedignore{ifset}}
+\defineunmatchedend{ifset}
+
+% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
+% defined with @set, or has been undefined with @clear.
+%
+\def\ifclear{\parsearg\ifclearxxx}
+\def\ifclearxxx #1{%
+ \expandafter\ifx\csname SET#1\endcsname\relax
+ \expandafter\ifclearsucceed
+ \else
+ \expandafter\ifclearfail
+ \fi
+}
+\def\ifclearsucceed{\conditionalsucceed{ifclear}}
+\def\ifclearfail{\nestedignore{ifclear}}
+\defineunmatchedend{ifclear}
+
+% @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text
+% following, through the first @end iftex (etc.). Make `@end iftex'
+% (etc.) valid only after an @iftex.
+%
+\def\iftex{\conditionalsucceed{iftex}}
+\def\ifnothtml{\conditionalsucceed{ifnothtml}}
+\def\ifnotinfo{\conditionalsucceed{ifnotinfo}}
+\defineunmatchedend{iftex}
+\defineunmatchedend{ifnothtml}
+\defineunmatchedend{ifnotinfo}
+
+% We can't just want to start a group at @iftex (for example) and end it
+% at @end iftex, since then @set commands inside the conditional have no
+% effect (they'd get reverted at the end of the group). So we must
+% define \Eiftex to redefine itself to be its previous value. (We can't
+% just define it to fail again with an ``unmatched end'' error, since
+% the @ifset might be nested.)
+%
+\def\conditionalsucceed#1{%
+ \edef\temp{%
+ % Remember the current value of \E#1.
+ \let\nece{prevE#1} = \nece{E#1}%
+ %
+ % At the `@end #1', redefine \E#1 to be its previous value.
+ \def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}%
+ }%
+ \temp
+}
+
+% We need to expand lots of \csname's, but we don't want to expand the
+% control sequences after we've constructed them.
+%
+\def\nece#1{\expandafter\noexpand\csname#1\endcsname}
+
+% @defininfoenclose.
+\let\definfoenclose=\comment
+
+
\message{indexing,}
% Index generation facilities
@@ -2270,42 +2616,48 @@ width0pt\relax} \fi
}
% @defindex foo == \newindex{foo}
-
+%
\def\defindex{\parsearg\newindex}
% Define @defcodeindex, like @defindex except put all entries in @code.
-
+%
+\def\defcodeindex{\parsearg\newcodeindex}
+%
\def\newcodeindex#1{%
\iflinks
\expandafter\newwrite \csname#1indfile\endcsname
\openout \csname#1indfile\endcsname \jobname.#1
\fi
\expandafter\xdef\csname#1index\endcsname{%
- \noexpand\docodeindex{#1}}
+ \noexpand\docodeindex{#1}}%
}
-\def\defcodeindex{\parsearg\newcodeindex}
% @synindex foo bar makes index foo feed into index bar.
% Do this instead of @defindex foo if you don't want it as a separate index.
-% The \closeout helps reduce unnecessary open files; the limit on the
-% Acorn RISC OS is a mere 16 files.
-\def\synindex#1 #2 {%
- \expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
- \expandafter\closeout\csname#1indfile\endcsname
- \expandafter\let\csname#1indfile\endcsname=\synindexfoo
- \expandafter\xdef\csname#1index\endcsname{% define \xxxindex
- \noexpand\doindex{#2}}%
-}
-
+%
% @syncodeindex foo bar similar, but put all entries made for index foo
% inside @code.
-\def\syncodeindex#1 #2 {%
- \expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
- \expandafter\closeout\csname#1indfile\endcsname
- \expandafter\let\csname#1indfile\endcsname=\synindexfoo
- \expandafter\xdef\csname#1index\endcsname{% define \xxxindex
- \noexpand\docodeindex{#2}}%
+%
+\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}}
+\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}}
+
+% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo),
+% #3 the target index (bar).
+\def\dosynindex#1#2#3{%
+ % Only do \closeout if we haven't already done it, else we'll end up
+ % closing the target index.
+ \expandafter \ifx\csname donesynindex#2\endcsname \undefined
+ % The \closeout helps reduce unnecessary open files; the limit on the
+ % Acorn RISC OS is a mere 16 files.
+ \expandafter\closeout\csname#2indfile\endcsname
+ \expandafter\let\csname\donesynindex#2\endcsname = 1
+ \fi
+ % redefine \fooindfile:
+ \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname
+ \expandafter\let\csname#2indfile\endcsname=\temp
+ % redefine \fooindex:
+ \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}%
}
% Define \doindex, the driver for all \fooindex macros.
@@ -2356,8 +2708,11 @@ width0pt\relax} \fi
% (Must be a way to avoid doing expansion at all, and thus not have to
% laboriously list every single command here.)
\def\@{@}% will be @@ when we switch to @ as escape char.
-%\let\{ = \lbracecmd
-%\let\} = \rbracecmd
+% Need these in case \tex is in effect and \{ is a \delimiter again.
+% But can't use \lbracecmd and \rbracecmd because texindex assumes
+% braces and backslashes are used only as delimiters.
+\let\{ = \mylbrace
+\let\} = \myrbrace
\def\_{{\realbackslash _}}%
\def\w{\realbackslash w }%
\def\bf{\realbackslash bf }%
@@ -2407,6 +2762,8 @@ width0pt\relax} \fi
\let\value = \expandablevalue
%
\unsepspaces
+% Turn off macro expansion
+\turnoffmacros
}
% If an index command is used in an @example environment, any spaces
@@ -2466,6 +2823,7 @@ width0pt\relax} \fi
\let\url=\indexdummyfont
\let\uref=\indexdummyfont
\let\env=\indexdummyfont
+\let\acronym=\indexdummyfont
\let\command=\indexdummyfont
\let\option=\indexdummyfont
\let\file=\indexdummyfont
@@ -2492,14 +2850,14 @@ width0pt\relax} \fi
\def\emptymacro{\empty}
% Most index entries go through here, but \dosubind is the general case.
-%
+%
\def\doind#1#2{\dosubind{#1}{#2}\empty}
% Workhorse for all \fooindexes.
% #1 is name of index, #2 is stuff to put there, #3 is subentry --
% \empty if called from \doind, as we usually are. The main exception
% is with defuns, which call us directly.
-%
+%
\def\dosubind#1#2#3{%
% Put the index entry in the margin if desired.
\ifx\SETmarginindex\relax\else
@@ -2524,24 +2882,28 @@ width0pt\relax} \fi
\def\subentry{ #3}%
\fi
%
- % First process the index-string with all font commands turned off
- % to get the string to sort by.
+ % First process the index entry with all font commands turned
+ % off to get the string to sort by.
{\indexnofonts \xdef\indexsorttmp{#2\subentry}}%
%
- % Now produce the complete index entry, with both the sort key and the
- % original text, including any font commands.
+ % Now the real index entry with the fonts.
\toks0 = {#2}%
+ %
+ % If third (subentry) arg is present, add it to the index
+ % string. And include a space.
+ \ifx\thirdarg\emptymacro \else
+ \toks0 = \expandafter{\the\toks0 \space #3}%
+ \fi
+ %
+ % Set up the complete index entry, with both the sort key
+ % and the original text, including any font commands. We write
+ % three arguments to \entry to the .?? file, texindex reduces to
+ % two when writing the .??s sorted result.
\edef\temp{%
\write\csname#1indfile\endcsname{%
\realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}%
}%
%
- % If third (subentry) arg is present, add it to the index string.
- \ifx\thirdarg\emptymacro \else
- \toks0 = {#3}%
- \edef\temp{\temp{\the\toks0}}%
- \fi
- %
% If a skip is the last thing on the list now, preserve it
% by backing up by \lastskip, doing the \write, then inserting
% the skip again. Otherwise, the whatsit generated by the
@@ -2553,10 +2915,22 @@ width0pt\relax} \fi
% will have extra space inserted, because the \medbreak in the
% start of the @defun won't see the skip inserted by the @end of
% the previous defun.
+ %
+ % But don't do any of this if we're not in vertical mode. We
+ % don't want to do a \vskip and prematurely end a paragraph.
+ %
+ % Avoid page breaks due to these extra skips, too.
+ %
\iflinks
- \skip0 = \lastskip \ifdim\lastskip = 0pt \else \vskip-\lastskip \fi
- \temp
- \ifdim\skip0 = 0pt \else \vskip\skip0 \fi
+ \ifvmode
+ \skip0 = \lastskip
+ \ifdim\lastskip = 0pt \else \nobreak\vskip-\lastskip \fi
+ \fi
+ %
+ \temp % do the write
+ %
+ %
+ \ifvmode \ifdim\skip0 = 0pt \else \nobreak\vskip\skip0 \fi \fi
\fi
}%
}%
@@ -2603,7 +2977,7 @@ width0pt\relax} \fi
\def\doprintindex#1{\begingroup
\dobreak \chapheadingskip{10000}%
%
- \indexfonts \rm
+ \smallfonts \rm
\tolerance = 9500
\indexbreaks
%
@@ -2619,7 +2993,7 @@ width0pt\relax} \fi
% and it loses the chapter title and the aux file entries for the
% index. The easiest way to prevent this problem is to make sure
% there is some text.
- (Index is nonexistent)
+ \putwordIndexNonexistent
\else
%
% If the index file exists but is empty, then \openin leaves \ifeof
@@ -2627,7 +3001,7 @@ width0pt\relax} \fi
% it can discover if there is anything in it.
\read 1 to \temp
\ifeof 1
- (Index is empty)
+ \putwordIndexIsEmpty
\else
% Index files are almost Texinfo source, but we use \ as the escape
% character. It would be better to use @, but that's too big a change
@@ -2646,21 +3020,35 @@ width0pt\relax} \fi
% These macros are used by the sorted index file itself.
% Change them to control the appearance of the index.
-% Same as \bigskipamount except no shrink.
-% \balancecolumns gets confused if there is any shrink.
-\newskip\initialskipamount \initialskipamount 12pt plus4pt
-
-\def\initial #1{%
-{\let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
-\ifdim\lastskip<\initialskipamount
-\removelastskip \penalty-200 \vskip \initialskipamount\fi
-\line{\secbf#1\hfill}\kern 2pt\penalty10000}}
+\def\initial#1{{%
+ % Some minor font changes for the special characters.
+ \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
+ %
+ % Remove any glue we may have, we'll be inserting our own.
+ \removelastskip
+ %
+ % We like breaks before the index initials, so insert a bonus.
+ \penalty -300
+ %
+ % Typeset the initial. Making this add up to a whole number of
+ % baselineskips increases the chance of the dots lining up from column
+ % to column. It still won't often be perfect, because of the stretch
+ % we need before each entry, but it's better.
+ %
+ % No shrink because it confuses \balancecolumns.
+ \vskip 1.67\baselineskip plus .5\baselineskip
+ \leftline{\secbf #1}%
+ \vskip .33\baselineskip plus .1\baselineskip
+ %
+ % Do our best not to break after the initial.
+ \nobreak
+}}
% This typesets a paragraph consisting of #1, dot leaders, and then #2
% flush to the right margin. It is used for index and table of contents
% entries. The paragraph is indented by \leftskip.
%
-\def\entry #1#2{\begingroup
+\def\entry#1#2{\begingroup
%
% Start a new paragraph if necessary, so our assignments below can't
% affect previous text.
@@ -2683,12 +3071,15 @@ width0pt\relax} \fi
%
% \hangafter is reset to 1 (which is the value we want) at the start
% of each paragraph, so we need not do anything with that.
- \hangindent=2em
+ \hangindent = 2em
%
% When the entry text needs to be broken, just fill out the first line
% with blank space.
\rightskip = 0pt plus1fil
%
+ % A bit of stretch before each entry for the benefit of balancing columns.
+ \vskip 0pt plus1pt
+ %
% Start a ``paragraph'' for the index entry so the line breaking
% parameters we've set above will have an effect.
\noindent
@@ -2713,7 +3104,11 @@ width0pt\relax} \fi
% The `\ ' here is removed by the implicit \unskip that TeX does as
% part of (the primitive) \par. Without it, a spurious underfull
% \hbox ensues.
- \ #2% The page number ends the paragraph.
+ \ifpdf
+ \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
+ \else
+ \ #2% The page number ends the paragraph.
+ \fi
\fi%
\par
\endgroup}
@@ -2742,24 +3137,26 @@ width0pt\relax} \fi
\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
% Grab any single-column material above us.
- \output = {\global\setbox\partialpage = \vbox{%
- %
+ \output = {%
+ %
% Here is a possibility not foreseen in manmac: if we accumulate a
% whole lot of material, we might end up calling this \output
% routine twice in a row (see the doublecol-lose test, which is
% essentially a couple of indexes with @setchapternewpage off). In
- % that case, we must prevent the second \partialpage from
- % simply overwriting the first, causing us to lose the page.
- % This will preserve it until a real output routine can ship it
- % out. Generally, \partialpage will be empty when this runs and
- % this will be a no-op.
- \unvbox\partialpage
+ % that case we just ship out what is in \partialpage with the normal
+ % output routine. Generally, \partialpage will be empty when this
+ % runs and this will be a no-op. See the indexspread.tex test case.
+ \ifvoid\partialpage \else
+ \onepageout{\pagecontents\partialpage}%
+ \fi
%
- % Unvbox the main output page.
- \unvbox255
- \kern-\topskip \kern\baselineskip
- }}%
- \eject
+ \global\setbox\partialpage = \vbox{%
+ % Unvbox the main output page.
+ \unvbox\PAGE
+ \kern-\topskip \kern\baselineskip
+ }%
+ }%
+ \eject % run that output routine to set \partialpage
%
% Use the double-column output routine for subsequent pages.
\output = {\doublecolumnout}%
@@ -2789,56 +3186,92 @@ width0pt\relax} \fi
% since nobody clobbers \vsize.)
\vsize = 2\vsize
}
+
+% The double-column output routine for all double-column pages except
+% the last.
+%
\def\doublecolumnout{%
\splittopskip=\topskip \splitmaxdepth=\maxdepth
% Get the available space for the double columns -- the normal
% (undoubled) page height minus any material left over from the
% previous page.
- \dimen@=\pageheight \advance\dimen@ by-\ht\partialpage
+ \dimen@ = \vsize
+ \divide\dimen@ by 2
+ \advance\dimen@ by -\ht\partialpage
+ %
% box0 will be the left-hand column, box2 the right.
\setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
\onepageout\pagesofar
\unvbox255
\penalty\outputpenalty
}
+%
+% Re-output the contents of the output page -- any previous material,
+% followed by the two boxes we just split, in box0 and box2.
\def\pagesofar{%
- % Re-output the contents of the output page -- any previous material,
- % followed by the two boxes we just split.
\unvbox\partialpage
+ %
\hsize = \doublecolumnhsize
- \wd0=\hsize \wd2=\hsize \hbox to\pagewidth{\box0\hfil\box2}%
+ \wd0=\hsize \wd2=\hsize
+ \hbox to\pagewidth{\box0\hfil\box2}%
}
+%
+% All done with double columns.
\def\enddoublecolumns{%
- \output = {\balancecolumns}\eject % split what we have
+ \output = {%
+ % Split the last of the double-column material. Leave it on the
+ % current page, no automatic page break.
+ \balancecolumns
+ %
+ % If we end up splitting too much material for the current page,
+ % though, there will be another page break right after this \output
+ % invocation ends. Having called \balancecolumns once, we do not
+ % want to call it again. Therefore, reset \output to its normal
+ % definition right away. (We hope \balancecolumns will never be
+ % called on to balance too much material, but if it is, this makes
+ % the output somewhat more palatable.)
+ \global\output = {\onepageout{\pagecontents\PAGE}}%
+ }%
+ \eject
\endgroup % started in \begindoublecolumns
%
- % Back to normal single-column typesetting, but take account of the
- % fact that we just accumulated some stuff on the output page.
+ % \pagegoal was set to the doubled \vsize above, since we restarted
+ % the current page. We're now back to normal single-column
+ % typesetting, so reset \pagegoal to the normal \vsize (after the
+ % \endgroup where \vsize got restored).
\pagegoal = \vsize
}
+%
+% Called at the end of the double column material.
\def\balancecolumns{%
- % Called at the end of the double column material.
- \setbox0 = \vbox{\unvbox255}%
+ \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
\dimen@ = \ht0
\advance\dimen@ by \topskip
\advance\dimen@ by-\baselineskip
- \divide\dimen@ by 2
+ \divide\dimen@ by 2 % target to split to
+ %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}%
\splittopskip = \topskip
% Loop until we get a decent breakpoint.
- {\vbadness=10000 \loop
- \global\setbox3=\copy0
- \global\setbox1=\vsplit3 to\dimen@
- \ifdim\ht3>\dimen@ \global\advance\dimen@ by1pt
- \repeat}%
+ {%
+ \vbadness = 10000
+ \loop
+ \global\setbox3 = \copy0
+ \global\setbox1 = \vsplit3 to \dimen@
+ \ifdim\ht3>\dimen@
+ \global\advance\dimen@ by 1pt
+ \repeat
+ }%
+ %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}%
\setbox0=\vbox to\dimen@{\unvbox1}%
\setbox2=\vbox to\dimen@{\unvbox3}%
+ %
\pagesofar
}
\catcode`\@ = \other
\message{sectioning,}
-% Define chapters, sections, etc.
+% Chapters, sections, etc.
\newcount\chapno
\newcount\secno \secno=0
@@ -2847,58 +3280,48 @@ width0pt\relax} \fi
% This counter is funny since it counts through charcodes of letters A, B, ...
\newcount\appendixno \appendixno = `\@
-\def\appendixletter{\char\the\appendixno}
-
-\newwrite\contentsfile
-% This is called from \setfilename.
-\def\opencontents{\openout\contentsfile = \jobname.toc }
+% \def\appendixletter{\char\the\appendixno}
+% We do the following for the sake of pdftex, which needs the actual
+% letter in the expansion, not just typeset.
+\def\appendixletter{%
+ \ifnum\appendixno=`A A%
+ \else\ifnum\appendixno=`B B%
+ \else\ifnum\appendixno=`C C%
+ \else\ifnum\appendixno=`D D%
+ \else\ifnum\appendixno=`E E%
+ \else\ifnum\appendixno=`F F%
+ \else\ifnum\appendixno=`G G%
+ \else\ifnum\appendixno=`H H%
+ \else\ifnum\appendixno=`I I%
+ \else\ifnum\appendixno=`J J%
+ \else\ifnum\appendixno=`K K%
+ \else\ifnum\appendixno=`L L%
+ \else\ifnum\appendixno=`M M%
+ \else\ifnum\appendixno=`N N%
+ \else\ifnum\appendixno=`O O%
+ \else\ifnum\appendixno=`P P%
+ \else\ifnum\appendixno=`Q Q%
+ \else\ifnum\appendixno=`R R%
+ \else\ifnum\appendixno=`S S%
+ \else\ifnum\appendixno=`T T%
+ \else\ifnum\appendixno=`U U%
+ \else\ifnum\appendixno=`V V%
+ \else\ifnum\appendixno=`W W%
+ \else\ifnum\appendixno=`X X%
+ \else\ifnum\appendixno=`Y Y%
+ \else\ifnum\appendixno=`Z Z%
+ % The \the is necessary, despite appearances, because \appendixletter is
+ % expanded while writing the .toc file. \char\appendixno is not
+ % expandable, thus it is written literally, thus all appendixes come out
+ % with the same letter (or @) in the toc without it.
+ \else\char\the\appendixno
+ \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
+ \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
% Each @chapter defines this as the name of the chapter.
-% page headings and footings can use it. @section does likewise
-
-\def\thischapter{} \def\thissection{}
-\def\seccheck#1{\ifnum \pageno<0
- \errmessage{@#1 not allowed after generating table of contents}%
-\fi}
-
-\def\chapternofonts{%
- \let\rawbackslash=\relax
- \let\frenchspacing=\relax
- \def\result{\realbackslash result}%
- \def\equiv{\realbackslash equiv}%
- \def\expansion{\realbackslash expansion}%
- \def\print{\realbackslash print}%
- \def\TeX{\realbackslash TeX}%
- \def\dots{\realbackslash dots}%
- \def\result{\realbackslash result}%
- \def\equiv{\realbackslash equiv}%
- \def\expansion{\realbackslash expansion}%
- \def\print{\realbackslash print}%
- \def\error{\realbackslash error}%
- \def\point{\realbackslash point}%
- \def\copyright{\realbackslash copyright}%
- \def\tt{\realbackslash tt}%
- \def\bf{\realbackslash bf}%
- \def\w{\realbackslash w}%
- \def\less{\realbackslash less}%
- \def\gtr{\realbackslash gtr}%
- \def\hat{\realbackslash hat}%
- \def\char{\realbackslash char}%
- \def\tclose##1{\realbackslash tclose{##1}}%
- \def\code##1{\realbackslash code{##1}}%
- \def\samp##1{\realbackslash samp{##1}}%
- \def\r##1{\realbackslash r{##1}}%
- \def\b##1{\realbackslash b{##1}}%
- \def\key##1{\realbackslash key{##1}}%
- \def\file##1{\realbackslash file{##1}}%
- \def\kbd##1{\realbackslash kbd{##1}}%
- % These are redefined because @smartitalic wouldn't work inside xdef.
- \def\i##1{\realbackslash i{##1}}%
- \def\cite##1{\realbackslash cite{##1}}%
- \def\var##1{\realbackslash var{##1}}%
- \def\emph##1{\realbackslash emph{##1}}%
- \def\dfn##1{\realbackslash dfn{##1}}%
-}
+% page headings and footings can use it. @section does likewise.
+\def\thischapter{}
+\def\thissection{}
\newcount\absseclevel % used to calculate proper heading level
\newcount\secbase\secbase=0 % @raise/lowersections modify this count
@@ -2970,59 +3393,59 @@ width0pt\relax} \fi
\fi
}
-
+% @chapter, @appendix, @unnumbered.
\def\thischaptername{No Chapter Title}
\outer\def\chapter{\parsearg\chapteryyy}
\def\chapteryyy #1{\numhead0{#1}} % normally numhead0 calls chapterzzz
-\def\chapterzzz #1{\seccheck{chapter}%
+\def\chapterzzz #1{%
\secno=0 \subsecno=0 \subsubsecno=0
-\global\advance \chapno by 1 \message{\putwordChapter \the\chapno}%
+\global\advance \chapno by 1 \message{\putwordChapter\space \the\chapno}%
\chapmacro {#1}{\the\chapno}%
\gdef\thissection{#1}%
\gdef\thischaptername{#1}%
% We don't substitute the actual chapter name into \thischapter
% because we don't want its macros evaluated now.
\xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}%
-{\chapternofonts%
\toks0 = {#1}%
-\edef\temp{{\realbackslash chapentry{\the\toks0}{\the\chapno}{\noexpand\folio}}}%
-\escapechar=`\\%
-\iflinks \write\contentsfile\temp \fi
-\donoderef %
+\edef\temp{\noexpand\writetocentry{\realbackslash chapentry{\the\toks0}%
+ {\the\chapno}}}%
+\temp
+\donoderef
\global\let\section = \numberedsec
\global\let\subsection = \numberedsubsec
\global\let\subsubsection = \numberedsubsubsec
-}}
+}
\outer\def\appendix{\parsearg\appendixyyy}
\def\appendixyyy #1{\apphead0{#1}} % normally apphead0 calls appendixzzz
-\def\appendixzzz #1{\seccheck{appendix}%
+\def\appendixzzz #1{%
\secno=0 \subsecno=0 \subsubsecno=0
-\global\advance \appendixno by 1 \message{Appendix \appendixletter}%
+\global\advance \appendixno by 1
+\message{\putwordAppendix\space \appendixletter}%
\chapmacro {#1}{\putwordAppendix{} \appendixletter}%
\gdef\thissection{#1}%
\gdef\thischaptername{#1}%
\xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}%
-{\chapternofonts%
\toks0 = {#1}%
-\edef\temp{{\realbackslash chapentry{\the\toks0}%
- {\putwordAppendix{} \appendixletter}{\noexpand\folio}}}%
-\escapechar=`\\%
-\iflinks \write\contentsfile\temp \fi
-\appendixnoderef %
+\edef\temp{\noexpand\writetocentry{\realbackslash chapentry{\the\toks0}%
+ {\putwordAppendix{} \appendixletter}}}%
+\temp
+\appendixnoderef
\global\let\section = \appendixsec
\global\let\subsection = \appendixsubsec
\global\let\subsubsection = \appendixsubsubsec
-}}
+}
% @centerchap is like @unnumbered, but the heading is centered.
\outer\def\centerchap{\parsearg\centerchapyyy}
\def\centerchapyyy #1{{\let\unnumbchapmacro=\centerchapmacro \unnumberedyyy{#1}}}
+% @top is like @unnumbered.
\outer\def\top{\parsearg\unnumberedyyy}
+
\outer\def\unnumbered{\parsearg\unnumberedyyy}
\def\unnumberedyyy #1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
-\def\unnumberedzzz #1{\seccheck{unnumbered}%
+\def\unnumberedzzz #1{%
\secno=0 \subsecno=0 \subsubsecno=0
%
% This used to be simply \message{#1}, but TeX fully expands the
@@ -3034,155 +3457,139 @@ width0pt\relax} \fi
% Anyway, we don't want the fully-expanded definition of @cite to appear
% as a result of the \message, we just want `@cite' itself. We use
% \the<toks register> to achieve this: TeX expands \the<toks> only once,
-% simply yielding the contents of the <toks register>.
+% simply yielding the contents of <toks register>. (We also do this for
+% the toc entries.)
\toks0 = {#1}\message{(\the\toks0)}%
%
\unnumbchapmacro {#1}%
\gdef\thischapter{#1}\gdef\thissection{#1}%
-{\chapternofonts%
\toks0 = {#1}%
-\edef\temp{{\realbackslash unnumbchapentry{\the\toks0}{\noexpand\folio}}}%
-\escapechar=`\\%
-\iflinks \write\contentsfile\temp \fi
-\unnumbnoderef %
+\edef\temp{\noexpand\writetocentry{\realbackslash unnumbchapentry{\the\toks0}}}%
+\temp
+\unnumbnoderef
\global\let\section = \unnumberedsec
\global\let\subsection = \unnumberedsubsec
\global\let\subsubsection = \unnumberedsubsubsec
-}}
+}
+% Sections.
\outer\def\numberedsec{\parsearg\secyyy}
\def\secyyy #1{\numhead1{#1}} % normally calls seczzz
-\def\seczzz #1{\seccheck{section}%
+\def\seczzz #1{%
\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
\gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}%
-{\chapternofonts%
\toks0 = {#1}%
-\edef\temp{{\realbackslash secentry %
-{\the\toks0}{\the\chapno}{\the\secno}{\noexpand\folio}}}%
-\escapechar=`\\%
-\iflinks \write\contentsfile\temp \fi
-\donoderef %
-\penalty 10000 %
-}}
+\edef\temp{\noexpand\writetocentry{\realbackslash secentry{\the\toks0}%
+ {\the\chapno}{\the\secno}}}%
+\temp
+\donoderef
+\nobreak
+}
\outer\def\appendixsection{\parsearg\appendixsecyyy}
\outer\def\appendixsec{\parsearg\appendixsecyyy}
\def\appendixsecyyy #1{\apphead1{#1}} % normally calls appendixsectionzzz
-\def\appendixsectionzzz #1{\seccheck{appendixsection}%
+\def\appendixsectionzzz #1{%
\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
\gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}%
-{\chapternofonts%
\toks0 = {#1}%
-\edef\temp{{\realbackslash secentry %
-{\the\toks0}{\appendixletter}{\the\secno}{\noexpand\folio}}}%
-\escapechar=`\\%
-\iflinks \write\contentsfile\temp \fi
-\appendixnoderef %
-\penalty 10000 %
-}}
+\edef\temp{\noexpand\writetocentry{\realbackslash secentry{\the\toks0}%
+ {\appendixletter}{\the\secno}}}%
+\temp
+\appendixnoderef
+\nobreak
+}
\outer\def\unnumberedsec{\parsearg\unnumberedsecyyy}
\def\unnumberedsecyyy #1{\unnmhead1{#1}} % normally calls unnumberedseczzz
-\def\unnumberedseczzz #1{\seccheck{unnumberedsec}%
+\def\unnumberedseczzz #1{%
\plainsecheading {#1}\gdef\thissection{#1}%
-{\chapternofonts%
\toks0 = {#1}%
-\edef\temp{{\realbackslash unnumbsecentry{\the\toks0}{\noexpand\folio}}}%
-\escapechar=`\\%
-\iflinks \write\contentsfile\temp \fi
-\unnumbnoderef %
-\penalty 10000 %
-}}
+\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsecentry{\the\toks0}}}%
+\temp
+\unnumbnoderef
+\nobreak
+}
+% Subsections.
\outer\def\numberedsubsec{\parsearg\numberedsubsecyyy}
\def\numberedsubsecyyy #1{\numhead2{#1}} % normally calls numberedsubseczzz
-\def\numberedsubseczzz #1{\seccheck{subsection}%
+\def\numberedsubseczzz #1{%
\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
\subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}%
-{\chapternofonts%
\toks0 = {#1}%
-\edef\temp{{\realbackslash subsecentry %
-{\the\toks0}{\the\chapno}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
-\escapechar=`\\%
-\iflinks \write\contentsfile\temp \fi
-\donoderef %
-\penalty 10000 %
-}}
+\edef\temp{\noexpand\writetocentry{\realbackslash subsecentry{\the\toks0}%
+ {\the\chapno}{\the\secno}{\the\subsecno}}}%
+\temp
+\donoderef
+\nobreak
+}
\outer\def\appendixsubsec{\parsearg\appendixsubsecyyy}
\def\appendixsubsecyyy #1{\apphead2{#1}} % normally calls appendixsubseczzz
-\def\appendixsubseczzz #1{\seccheck{appendixsubsec}%
+\def\appendixsubseczzz #1{%
\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
\subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}%
-{\chapternofonts%
\toks0 = {#1}%
-\edef\temp{{\realbackslash subsecentry %
-{\the\toks0}{\appendixletter}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
-\escapechar=`\\%
-\iflinks \write\contentsfile\temp \fi
-\appendixnoderef %
-\penalty 10000 %
-}}
+\edef\temp{\noexpand\writetocentry{\realbackslash subsecentry{\the\toks0}%
+ {\appendixletter}{\the\secno}{\the\subsecno}}}%
+\temp
+\appendixnoderef
+\nobreak
+}
\outer\def\unnumberedsubsec{\parsearg\unnumberedsubsecyyy}
\def\unnumberedsubsecyyy #1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
-\def\unnumberedsubseczzz #1{\seccheck{unnumberedsubsec}%
+\def\unnumberedsubseczzz #1{%
\plainsubsecheading {#1}\gdef\thissection{#1}%
-{\chapternofonts%
\toks0 = {#1}%
-\edef\temp{{\realbackslash unnumbsubsecentry{\the\toks0}{\noexpand\folio}}}%
-\escapechar=`\\%
-\iflinks \write\contentsfile\temp \fi
-\unnumbnoderef %
-\penalty 10000 %
-}}
+\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsubsecentry%
+ {\the\toks0}}}%
+\temp
+\unnumbnoderef
+\nobreak
+}
+% Subsubsections.
\outer\def\numberedsubsubsec{\parsearg\numberedsubsubsecyyy}
\def\numberedsubsubsecyyy #1{\numhead3{#1}} % normally numberedsubsubseczzz
-\def\numberedsubsubseczzz #1{\seccheck{subsubsection}%
+\def\numberedsubsubseczzz #1{%
\gdef\thissection{#1}\global\advance \subsubsecno by 1 %
\subsubsecheading {#1}
{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
-{\chapternofonts%
\toks0 = {#1}%
-\edef\temp{{\realbackslash subsubsecentry{\the\toks0}
- {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}
- {\noexpand\folio}}}%
-\escapechar=`\\%
-\iflinks \write\contentsfile\temp \fi
-\donoderef %
-\penalty 10000 %
-}}
+\edef\temp{\noexpand\writetocentry{\realbackslash subsubsecentry{\the\toks0}%
+ {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}}}%
+\temp
+\donoderef
+\nobreak
+}
\outer\def\appendixsubsubsec{\parsearg\appendixsubsubsecyyy}
\def\appendixsubsubsecyyy #1{\apphead3{#1}} % normally appendixsubsubseczzz
-\def\appendixsubsubseczzz #1{\seccheck{appendixsubsubsec}%
+\def\appendixsubsubseczzz #1{%
\gdef\thissection{#1}\global\advance \subsubsecno by 1 %
\subsubsecheading {#1}
{\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
-{\chapternofonts%
\toks0 = {#1}%
-\edef\temp{{\realbackslash subsubsecentry{\the\toks0}%
- {\appendixletter}
- {\the\secno}{\the\subsecno}{\the\subsubsecno}{\noexpand\folio}}}%
-\escapechar=`\\%
-\iflinks \write\contentsfile\temp \fi
-\appendixnoderef %
-\penalty 10000 %
-}}
+\edef\temp{\noexpand\writetocentry{\realbackslash subsubsecentry{\the\toks0}%
+ {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}}}%
+\temp
+\appendixnoderef
+\nobreak
+}
\outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubsecyyy}
\def\unnumberedsubsubsecyyy #1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
-\def\unnumberedsubsubseczzz #1{\seccheck{unnumberedsubsubsec}%
+\def\unnumberedsubsubseczzz #1{%
\plainsubsubsecheading {#1}\gdef\thissection{#1}%
-{\chapternofonts%
\toks0 = {#1}%
-\edef\temp{{\realbackslash unnumbsubsubsecentry{\the\toks0}{\noexpand\folio}}}%
-\escapechar=`\\%
-\iflinks \write\contentsfile\temp \fi
-\unnumbnoderef %
-\penalty 10000 %
-}}
+\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsubsubsecentry%
+ {\the\toks0}}}%
+\temp
+\unnumbnoderef
+\nobreak
+}
% These are variants which are not "outer", so they can appear in @ifinfo.
% Actually, they should now be obsolete; ordinary section commands should work.
@@ -3211,8 +3618,7 @@ width0pt\relax} \fi
% Define @majorheading, @heading and @subheading
-% NOTE on use of \vbox for chapter headings, section headings, and
-% such:
+% NOTE on use of \vbox for chapter headings, section headings, and such:
% 1) We use \vbox rather than the earlier \line to permit
% overlong headings to fold.
% 2) \hyphenpenalty is set to 10000 because hyphenation in a
@@ -3259,12 +3665,12 @@ width0pt\relax} \fi
\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
-\def\CHAPPAGoff{
+\def\CHAPPAGoff{%
\global\let\contentsalignmacro = \chappager
\global\let\pchapsepmacro=\chapbreak
\global\let\pagealignmacro=\chappager}
-\def\CHAPPAGon{
+\def\CHAPPAGon{%
\global\let\contentsalignmacro = \chappager
\global\let\pchapsepmacro=\chappager
\global\let\pagealignmacro=\chappager
@@ -3318,7 +3724,7 @@ width0pt\relax} \fi
\def\unnchfopen #1{%
\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
\parindent=0pt\raggedright
- \rm #1\hfill}}\bigskip \par\penalty 10000 %
+ \rm #1\hfill}}\bigskip \par\nobreak
}
\def\chfopen #1#2{\chapoddpage {\chapfonts
@@ -3329,7 +3735,7 @@ width0pt\relax} \fi
\def\centerchfopen #1{%
\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
\parindent=0pt
- \hfill {\rm #1}\hfill}}\bigskip \par\penalty 10000 %
+ \hfill {\rm #1}\hfill}}\bigskip \par\nobreak
}
\def\CHAPFopen{
@@ -3382,24 +3788,45 @@ width0pt\relax} \fi
}
-\message{toc printing,}
-% Finish up the main text and prepare to read what we've written
-% to \contentsfile.
+\message{toc,}
+% Table of contents.
+\newwrite\tocfile
+
+% Write an entry to the toc file, opening it if necessary.
+% Called from @chapter, etc. We supply {\folio} at the end of the
+% argument, which will end up as the last argument to the \...entry macro.
+%
+% We open the .toc file here instead of at @setfilename or any other
+% given time so that @contents can be put in the document anywhere.
+%
+\newif\iftocfileopened
+\def\writetocentry#1{%
+ \iftocfileopened\else
+ \immediate\openout\tocfile = \jobname.toc
+ \global\tocfileopenedtrue
+ \fi
+ \iflinks \write\tocfile{#1{\folio}}\fi
+}
\newskip\contentsrightmargin \contentsrightmargin=1in
+\newcount\savepageno
+\newcount\lastnegativepageno \lastnegativepageno = -1
+
+% Finish up the main text and prepare to read what we've written
+% to \tocfile.
+%
\def\startcontents#1{%
% If @setchapternewpage on, and @headings double, the contents should
% start on an odd page, unlike chapters. Thus, we maintain
% \contentsalignmacro in parallel with \pagealignmacro.
% From: Torbjorn Granlund <tege@matematik.su.se>
\contentsalignmacro
- \immediate\closeout \contentsfile
- \ifnum \pageno>0
- \pageno = -1 % Request roman numbered pages.
- \fi
+ \immediate\closeout\tocfile
+ %
% Don't need to put `Contents' or `Short Contents' in the headline.
% It is abundantly clear what they are.
\unnumbchapmacro{#1}\def\thischapter{}%
+ \savepageno = \pageno
\begingroup % Set up to handle contents files properly.
\catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11
% We can't do this, because then an actual ^ in a section
@@ -3407,20 +3834,31 @@ width0pt\relax} \fi
%\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
\raggedbottom % Worry more about breakpoints than the bottom.
\advance\hsize by -\contentsrightmargin % Don't use the full line length.
+ %
+ % Roman numerals for page numbers.
+ \ifnum \pageno>0 \pageno = \lastnegativepageno \fi
}
% Normal (long) toc.
-\outer\def\contents{%
- \startcontents{\putwordTableofContents}%
- \input \jobname.toc
+\def\contents{%
+ \startcontents{\putwordTOC}%
+ \openin 1 \jobname.toc
+ \ifeof 1 \else
+ \closein 1
+ \input \jobname.toc
+ \fi
+ \vfill \eject
+ \contentsalignmacro % in case @setchapternewpage odd is in effect
+ \pdfmakeoutlines
\endgroup
- \vfill \eject
+ \lastnegativepageno = \pageno
+ \pageno = \savepageno
}
% And just the chapters.
-\outer\def\summarycontents{%
- \startcontents{\putwordShortContents}%
+\def\summarycontents{%
+ \startcontents{\putwordShortTOC}%
%
\let\chapentry = \shortchapentry
\let\unnumbchapentry = \shortunnumberedentry
@@ -3436,12 +3874,23 @@ width0pt\relax} \fi
\def\unnumbsubsecentry ##1##2{}
\def\subsubsecentry ##1##2##3##4##5##6{}
\def\unnumbsubsubsecentry ##1##2{}
- \input \jobname.toc
+ \openin 1 \jobname.toc
+ \ifeof 1 \else
+ \closein 1
+ \input \jobname.toc
+ \fi
+ \vfill \eject
+ \contentsalignmacro % in case @setchapternewpage odd is in effect
\endgroup
- \vfill \eject
+ \lastnegativepageno = \pageno
+ \pageno = \savepageno
}
\let\shortcontents = \summarycontents
+\ifpdf
+ \pdfcatalog{/PageMode /UseOutlines}%
+\fi
+
% These macros generate individual entries in the table of contents.
% The first argument is the chapter or section name.
% The last argument is the page number.
@@ -3452,7 +3901,7 @@ width0pt\relax} \fi
% See comments in \dochapentry re vbox and related settings
\def\shortchapentry#1#2#3{%
- \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno{#3}}%
+ \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#3\egroup}%
}
% Typeset the label for a chapter or appendix for the short contents.
@@ -3460,10 +3909,14 @@ width0pt\relax} \fi
% We could simplify the code here by writing out an \appendixentry
% command in the toc file for appendices, instead of using \chapentry
% for both, but it doesn't seem worth it.
-\setbox0 = \hbox{\shortcontrm \putwordAppendix }
-\newdimen\shortappendixwidth \shortappendixwidth = \wd0
-
+%
+\newdimen\shortappendixwidth
+%
\def\shortchaplabel#1{%
+ % Compute width of word "Appendix", may change with language.
+ \setbox0 = \hbox{\shortcontrm \putwordAppendix}%
+ \shortappendixwidth = \wd0
+ %
% We typeset #1 in a box of constant width, regardless of the text of
% #1, so the chapter titles will come out aligned.
\setbox0 = \hbox{#1}%
@@ -3478,7 +3931,7 @@ width0pt\relax} \fi
}
\def\unnumbchapentry#1#2{\dochapentry{#1}{#2}}
-\def\shortunnumberedentry#1#2{\tocentry{#1}{\doshortpageno{#2}}}
+\def\shortunnumberedentry#1#2{\tocentry{#1}{\doshortpageno\bgroup#2\egroup}}
% Sections.
\def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}}
@@ -3505,24 +3958,24 @@ width0pt\relax} \fi
\penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
\begingroup
\chapentryfonts
- \tocentry{#1}{\dopageno{#2}}%
+ \tocentry{#1}{\dopageno\bgroup#2\egroup}%
\endgroup
\nobreak\vskip .25\baselineskip plus.1\baselineskip
}
\def\dosecentry#1#2{\begingroup
\secentryfonts \leftskip=\tocindent
- \tocentry{#1}{\dopageno{#2}}%
+ \tocentry{#1}{\dopageno\bgroup#2\egroup}%
\endgroup}
\def\dosubsecentry#1#2{\begingroup
\subsecentryfonts \leftskip=2\tocindent
- \tocentry{#1}{\dopageno{#2}}%
+ \tocentry{#1}{\dopageno\bgroup#2\egroup}%
\endgroup}
\def\dosubsubsecentry#1#2{\begingroup
\subsubsecentryfonts \leftskip=3\tocindent
- \tocentry{#1}{\dopageno{#2}}%
+ \tocentry{#1}{\dopageno\bgroup#2\egroup}%
\endgroup}
% Final typesetting of a toc entry; we use the same \entry macro as for
@@ -3550,6 +4003,7 @@ width0pt\relax} \fi
\message{environments,}
+% @foo ... @end foo.
% Since these characters are used in examples, it should be an even number of
% \tt widths. Each \tt character is 1en, so two makes it 1em.
@@ -3758,49 +4212,52 @@ width0pt\relax} \fi
\fi
}
-% To ending an @example-like environment, we first end the paragraph
-% (via \afterenvbreak's vertical glue), and then the group. That way we
-% keep the zero \parskip that the environments set -- \parskip glue
-% will be inserted at the beginning of the next paragraph in the
-% document, after the environment.
+% Define the \E... control sequence only if we are inside the particular
+% environment, so the error checking in \end will work.
%
-\def\nonfillfinish{\afterenvbreak\endgroup}%
+% To end an @example-like environment, we first end the paragraph (via
+% \afterenvbreak's vertical glue), and then the group. That way we keep
+% the zero \parskip that the environments set -- \parskip glue will be
+% inserted at the beginning of the next paragraph in the document, after
+% the environment.
+%
+\def\nonfillfinish{\afterenvbreak\endgroup}
+% @lisp: indented, narrowed, typewriter font.
\def\lisp{\begingroup
\nonfillstart
\let\Elisp = \nonfillfinish
\tt
- % Make @kbd do something special, if requested.
- \let\kbdfont\kbdexamplefont
- \rawbackslash % have \ input char produce \ char from current font
- \gobble
+ \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
+ \gobble % eat return
}
-% Define the \E... control sequence only if we are inside the
-% environment, so the error checking in \end will work.
-%
-% We must call \lisp last in the definition, since it reads the
-% return following the @example (or whatever) command.
-%
+% @example: Same as @lisp.
\def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp}
-\def\smallexample{\begingroup \def\Esmallexample{\nonfillfinish\endgroup}\lisp}
-\def\smalllisp{\begingroup \def\Esmalllisp{\nonfillfinish\endgroup}\lisp}
-% @smallexample and @smalllisp. This is not used unless the @smallbook
-% command is given. Originally contributed by Pavel@xerox.
+% @small... is usually equivalent to the non-small (@smallbook
+% redefines). We must call \example (or whatever) last in the
+% definition, since it reads the return following the @example (or
+% whatever) command.
+%
+% This actually allows (for example) @end display inside an
+% @smalldisplay. Too bad, but makeinfo will catch the error anyway.
%
+\def\smalldisplay{\begingroup\def\Esmalldisplay{\nonfillfinish\endgroup}\display}
+\def\smallexample{\begingroup\def\Esmallexample{\nonfillfinish\endgroup}\lisp}
+\def\smallformat{\begingroup\def\Esmallformat{\nonfillfinish\endgroup}\format}
+\def\smalllisp{\begingroup\def\Esmalllisp{\nonfillfinish\endgroup}\lisp}
+
+% Real @smallexample and @smalllisp (when @smallbook): use smaller fonts.
+% Originally contributed by Pavel@xerox.
\def\smalllispx{\begingroup
- \nonfillstart
- \let\Esmalllisp = \nonfillfinish
- \let\Esmallexample = \nonfillfinish
- %
- % Smaller fonts for small examples.
- \indexfonts \tt
- \rawbackslash % make \ output the \ character from the current font (tt)
- \gobble
+ \def\Esmalllisp{\nonfillfinish\endgroup}%
+ \def\Esmallexample{\nonfillfinish\endgroup}%
+ \smallfonts
+ \lisp
}
-% This is @display; same as @lisp except use roman font.
+% @display: same as @lisp except keep current font.
%
\def\display{\begingroup
\nonfillstart
@@ -3808,7 +4265,15 @@ width0pt\relax} \fi
\gobble
}
-% This is @format; same as @display except don't narrow margins.
+% @smalldisplay (when @smallbook): @display plus smaller fonts.
+%
+\def\smalldisplayx{\begingroup
+ \def\Esmalldisplay{\nonfillfinish\endgroup}%
+ \smallfonts \rm
+ \display
+}
+
+% @format: same as @display except don't narrow margins.
%
\def\format{\begingroup
\let\nonarrowing = t
@@ -3817,20 +4282,27 @@ width0pt\relax} \fi
\gobble
}
-% @flushleft (same as @format) and @flushright.
+% @smallformat (when @smallbook): @format plus smaller fonts.
%
-\def\flushleft{\begingroup
- \let\nonarrowing = t
- \nonfillstart
- \let\Eflushleft = \nonfillfinish
- \gobble
+\def\smallformatx{\begingroup
+ \def\Esmallformat{\nonfillfinish\endgroup}%
+ \smallfonts \rm
+ \format
}
+
+% @flushleft (same as @format).
+%
+\def\flushleft{\begingroup \def\Eflushleft{\nonfillfinish\endgroup}\format}
+
+% @flushright.
+%
\def\flushright{\begingroup
\let\nonarrowing = t
\nonfillstart
\let\Eflushright = \nonfillfinish
\advance\leftskip by 0pt plus 1fill
- \gobble}
+ \gobble
+}
% @quotation does normal linebreaking (hence we can't use \nonfillstart)
% and narrows the margins.
@@ -3853,9 +4325,11 @@ width0pt\relax} \fi
\fi
}
+
\message{defuns,}
-% Define formatter for defuns
-% First, allow user to change definition object font (\df) internally
+% @defun etc.
+
+% Allow user to change definition object font (\df) internally
\def\setdeffont #1 {\csname DEF#1\endcsname}
\newskip\defbodyindent \defbodyindent=.4in
@@ -3909,10 +4383,16 @@ width0pt\relax} \fi
%% contained text. This is especially needed for [ and ]
\def\opnr{{\sf\char`\(}\global\advance\parencount by 1 }
\def\clnr{{\sf\char`\)}\global\advance\parencount by -1 }
-\def\ampnr{\&}
+\let\ampnr = \&
\def\lbrb{{\bf\char`\[}}
\def\rbrb{{\bf\char`\]}}
+% Active &'s sneak into the index arguments, so make sure it's defined.
+{
+ \catcode`& = 13
+ \global\let& = \ampnr
+}
+
% First, defname, which formats the header line itself.
% #1 should be the function name.
% #2 should be the type of definition, such as "Function".
@@ -3922,20 +4402,18 @@ width0pt\relax} \fi
% outside the @def...
\dimen2=\leftskip
\advance\dimen2 by -\defbodyindent
-\dimen3=\rightskip
-\advance\dimen3 by -\defbodyindent
-\noindent %
+\noindent
\setbox0=\hbox{\hskip \deflastargmargin{\rm #2}\hskip \deftypemargin}%
\dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line
\dimen1=\hsize \advance \dimen1 by -\defargsindent %size for continuations
-\parshape 2 0in \dimen0 \defargsindent \dimen1 %
+\parshape 2 0in \dimen0 \defargsindent \dimen1
% Now output arg 2 ("Function" or some such)
% ending at \deftypemargin from the right margin,
% but stuck inside a box of width 0 so it does not interfere with linebreaking
{% Adjust \hsize to exclude the ambient margins,
% so that \rightline will obey them.
-\advance \hsize by -\dimen2 \advance \hsize by -\dimen3
-\rlap{\rightline{{\rm #2}\hskip \deftypemargin}}}%
+\advance \hsize by -\dimen2
+\rlap{\rightline{{\rm #2}\hskip -1.25pc }}}%
% Make all lines underfull and no complaints:
\tolerance=10000 \hbadness=10000
\advance\leftskip by -\defbodyindent
@@ -3956,7 +4434,7 @@ width0pt\relax} \fi
\def#1{\endgraf\endgroup\medbreak}%
\def#2{\begingroup\obeylines\activeparens\spacesplit#3}%
\parindent=0in
-\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
+\advance\leftskip by \defbodyindent
\exdentamount=\defbodyindent
\begingroup %
\catcode 61=\active % 61 is `='
@@ -3966,7 +4444,7 @@ width0pt\relax} \fi
% #2 is the \...x control sequence for consecutive fns (which we define).
% #3 is the control sequence to call to resume processing.
% #4, delimited by the space, is the class name.
-%
+%
\def\defmethparsebody#1#2#3#4 {\begingroup\inENV %
\medbreak %
% Define the end token that this defining construct specifies
@@ -3974,27 +4452,43 @@ width0pt\relax} \fi
\def#1{\endgraf\endgroup\medbreak}%
\def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}%
\parindent=0in
-\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
+\advance\leftskip by \defbodyindent
\exdentamount=\defbodyindent
\begingroup\obeylines\activeparens\spacesplit{#3{#4}}}
-% @deftypemethod has an extra argument that nothing else does. Sigh.
+% Used for @deftypemethod and @deftypeivar.
% #1 is the \E... control sequence to end the definition (which we define).
% #2 is the \...x control sequence for consecutive fns (which we define).
% #3 is the control sequence to call to resume processing.
-% #4, delimited by the space, is the class name.
+% #4, delimited by a space, is the class name.
% #5 is the method's return type.
+%
+\def\deftypemethparsebody#1#2#3#4 #5 {\begingroup\inENV
+ \medbreak
+ \def#1{\endgraf\endgroup\medbreak}%
+ \def#2##1 ##2 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}{##2}}}%
+ \parindent=0in
+ \advance\leftskip by \defbodyindent
+ \exdentamount=\defbodyindent
+ \begingroup\obeylines\activeparens\spacesplit{#3{#4}{#5}}}
+
+% Used for @deftypeop. The change from \deftypemethparsebody is an
+% extra argument at the beginning which is the `category', instead of it
+% being the hardwired string `Method' or `Instance Variable'. We have
+% to account for this both in the \...x definition and in parsing the
+% input at hand. Thus also need a control sequence (passed as #5) for
+% the \E... definition to assign the category name to.
%
-\def\deftypemethparsebody#1#2#3#4 #5 {\begingroup\inENV %
-\medbreak %
-% Define the end token that this defining construct specifies
-% so that it will exit this group.
-\def#1{\endgraf\endgroup\medbreak}%
-\def#2##1 ##2 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}{##2}}}%
-\parindent=0in
-\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
-\exdentamount=\defbodyindent
-\begingroup\obeylines\activeparens\spacesplit{#3{#4}{#5}}}
+\def\deftypeopparsebody#1#2#3#4#5 #6 {\begingroup\inENV
+ \medbreak
+ \def#1{\endgraf\endgroup\medbreak}%
+ \def#2##1 ##2 ##3 {%
+ \def#4{##1}%
+ \begingroup\obeylines\activeparens\spacesplit{#3{##2}{##3}}}%
+ \parindent=0in
+ \advance\leftskip by \defbodyindent
+ \exdentamount=\defbodyindent
+ \begingroup\obeylines\activeparens\spacesplit{#3{#5}{#6}}}
\def\defopparsebody #1#2#3#4#5 {\begingroup\inENV %
\medbreak %
@@ -4004,7 +4498,7 @@ width0pt\relax} \fi
\def#2##1 ##2 {\def#4{##1}%
\begingroup\obeylines\activeparens\spacesplit{#3{##2}}}%
\parindent=0in
-\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
+\advance\leftskip by \defbodyindent
\exdentamount=\defbodyindent
\begingroup\obeylines\activeparens\spacesplit{#3{#5}}}
@@ -4019,7 +4513,7 @@ width0pt\relax} \fi
\def#1{\endgraf\endgroup\medbreak}%
\def#2{\begingroup\obeylines\spacesplit#3}%
\parindent=0in
-\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
+\advance\leftskip by \defbodyindent
\exdentamount=\defbodyindent
\begingroup %
\catcode 61=\active %
@@ -4036,7 +4530,7 @@ width0pt\relax} \fi
\def#1{\endgraf\endgroup\medbreak}%
\def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}%
\parindent=0in
- \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
+ \advance\leftskip by \defbodyindent
\exdentamount=\defbodyindent
\begingroup\obeylines
}
@@ -4081,7 +4575,7 @@ width0pt\relax} \fi
\def#2##1 ##2 {\def#4{##1}%
\begingroup\obeylines\spacesplit{#3{##2}}}%
\parindent=0in
-\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
+\advance\leftskip by \defbodyindent
\exdentamount=\defbodyindent
\begingroup\obeylines\spacesplit{#3{#5}}}
@@ -4105,16 +4599,17 @@ width0pt\relax} \fi
% First, define the processing that is wanted for arguments of \defun
% Use this to expand the args and terminate the paragraph they make up
-\def\defunargs #1{\functionparens \sl
+\def\defunargs#1{\functionparens \sl
% Expand, preventing hyphenation at `-' chars.
% Note that groups don't affect changes in \hyphenchar.
-\hyphenchar\tensl=0
+% Set the font temporarily and use \font in case \setfont made \tensl a macro.
+{\tensl\hyphenchar\font=0}%
#1%
-\hyphenchar\tensl=45
+{\tensl\hyphenchar\font=45}%
\ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi%
\interlinepenalty=10000
\advance\rightskip by 0pt plus 1fil
-\endgraf\penalty 10000\vskip -\parskip\penalty 10000%
+\endgraf\nobreak\vskip -\parskip\nobreak
}
\def\deftypefunargs #1{%
@@ -4125,7 +4620,7 @@ width0pt\relax} \fi
\tclose{#1}% avoid \code because of side effects on active chars
\interlinepenalty=10000
\advance\rightskip by 0pt plus 1fil
-\endgraf\penalty 10000\vskip -\parskip\penalty 10000%
+\endgraf\nobreak\vskip -\parskip\nobreak
}
% Do complete processing of one @defun or @defunx line already parsed.
@@ -4144,7 +4639,7 @@ width0pt\relax} \fi
\def\defun{\defparsebody\Edefun\defunx\defunheader}
\def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
-\begingroup\defname {#1}{Function}%
+\begingroup\defname {#1}{\putwordDeffunc}%
\defunargs {#2}\endgroup %
\catcode 61=\other % Turn off change made in \defparsebody
}
@@ -4158,7 +4653,7 @@ width0pt\relax} \fi
% #1 is the data type, #2 the name, #3 the args.
\def\deftypefunheaderx #1#2 #3\relax{%
\doind {fn}{\code{#2}}% Make entry in function index
-\begingroup\defname {\defheaderxcond#1\relax$$$#2}{Function}%
+\begingroup\defname {\defheaderxcond#1\relax$$$#2}{\putwordDeftypefun}%
\deftypefunargs {#3}\endgroup %
\catcode 61=\other % Turn off change made in \defparsebody
}
@@ -4189,7 +4684,7 @@ width0pt\relax} \fi
\def\defmac{\defparsebody\Edefmac\defmacx\defmacheader}
\def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
-\begingroup\defname {#1}{Macro}%
+\begingroup\defname {#1}{\putwordDefmac}%
\defunargs {#2}\endgroup %
\catcode 61=\other % Turn off change made in \defparsebody
}
@@ -4199,36 +4694,39 @@ width0pt\relax} \fi
\def\defspec{\defparsebody\Edefspec\defspecx\defspecheader}
\def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
-\begingroup\defname {#1}{Special Form}%
+\begingroup\defname {#1}{\putwordDefspec}%
\defunargs {#2}\endgroup %
\catcode 61=\other % Turn off change made in \defparsebody
}
-% This definition is run if you use @defunx
-% anywhere other than immediately after a @defun or @defunx.
-
-\def\deffnx #1 {\errmessage{@deffnx in invalid context}}
-\def\defunx #1 {\errmessage{@defunx in invalid context}}
-\def\defmacx #1 {\errmessage{@defmacx in invalid context}}
-\def\defspecx #1 {\errmessage{@defspecx in invalid context}}
-\def\deftypefnx #1 {\errmessage{@deftypefnx in invalid context}}
-\def\deftypemethodx #1 {\errmessage{@deftypemethodx in invalid context}}
-\def\deftypefunx #1 {\errmessage{@deftypeunx in invalid context}}
-
-% @defmethod, and so on
-
% @defop CATEGORY CLASS OPERATION ARG...
-
+%
\def\defop #1 {\def\defoptype{#1}%
\defopparsebody\Edefop\defopx\defopheader\defoptype}
-
-\def\defopheader #1#2#3{%
+%
+\def\defopheader#1#2#3{%
\dosubind {fn}{\code{#2}}{\putwordon\ #1}% Make entry in function index
-\begingroup\defname {#2}{\defoptype{} on #1}%
+\begingroup\defname {#2}{\defoptype\ \putwordon\ #1}%
\defunargs {#3}\endgroup %
}
-% @deftypemethod CLASS RETURN-TYPE METHOD ARG...
+% @deftypeop CATEGORY CLASS TYPE OPERATION ARG...
+%
+\def\deftypeop #1 {\def\deftypeopcategory{#1}%
+ \deftypeopparsebody\Edeftypeop\deftypeopx\deftypeopheader
+ \deftypeopcategory}
+%
+% #1 is the class name, #2 the data type, #3 the operation name, #4 the args.
+\def\deftypeopheader#1#2#3#4{%
+ \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
+ \begingroup
+ \defname{\defheaderxcond#2\relax$$$#3}
+ {\deftypeopcategory\ \putwordon\ \code{#1}}%
+ \deftypefunargs{#4}%
+ \endgroup
+}
+
+% @deftypemethod CLASS TYPE METHOD ARG...
%
\def\deftypemethod{%
\deftypemethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader}
@@ -4242,6 +4740,21 @@ width0pt\relax} \fi
\endgroup
}
+% @deftypeivar CLASS TYPE VARNAME
+%
+\def\deftypeivar{%
+ \deftypemethparsebody\Edeftypeivar\deftypeivarx\deftypeivarheader}
+%
+% #1 is the class name, #2 the data type, #3 the variable name.
+\def\deftypeivarheader#1#2#3{%
+ \dosubind{vr}{\code{#3}}{\putwordof\ \code{#1}}% entry in variable index
+ \begingroup
+ \defname{\defheaderxcond#2\relax$$$#3}
+ {\putwordInstanceVariableof\ \code{#1}}%
+ \defvarargs{#3}%
+ \endgroup
+}
+
% @defmethod == @defop Method
%
\def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader}
@@ -4261,37 +4774,30 @@ width0pt\relax} \fi
\defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype}
\def\defcvarheader #1#2#3{%
-\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index
-\begingroup\defname {#2}{\defcvtype{} of #1}%
+\dosubind {vr}{\code{#2}}{\putwordof\ #1}% Make entry in var index
+\begingroup\defname {#2}{\defcvtype\ \putwordof\ #1}%
\defvarargs {#3}\endgroup %
}
-% @defivar == @defcv {Instance Variable}
-
+% @defivar CLASS VARNAME == @defcv {Instance Variable} CLASS VARNAME
+%
\def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader}
-
-\def\defivarheader #1#2#3{%
-\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index
-\begingroup\defname {#2}{Instance Variable of #1}%
-\defvarargs {#3}\endgroup %
+%
+\def\defivarheader#1#2#3{%
+ \dosubind {vr}{\code{#2}}{\putwordof\ #1}% entry in var index
+ \begingroup
+ \defname{#2}{\putwordInstanceVariableof\ #1}%
+ \defvarargs{#3}%
+ \endgroup
}
-% These definitions are run if you use @defmethodx, etc.,
-% anywhere other than immediately after a @defmethod, etc.
-
-\def\defopx #1 {\errmessage{@defopx in invalid context}}
-\def\defmethodx #1 {\errmessage{@defmethodx in invalid context}}
-\def\defcvx #1 {\errmessage{@defcvx in invalid context}}
-\def\defivarx #1 {\errmessage{@defivarx in invalid context}}
-
-% Now @defvar
-
+% @defvar
% First, define the processing that is wanted for arguments of @defvar.
% This is actually simple: just print them in roman.
% This must expand the args and terminate the paragraph they make up
\def\defvarargs #1{\normalparens #1%
\interlinepenalty=10000
-\endgraf\penalty 10000\vskip -\parskip\penalty 10000}
+\endgraf\nobreak\vskip -\parskip\nobreak}
% @defvr Counter foo-count
@@ -4305,7 +4811,7 @@ width0pt\relax} \fi
\def\defvar{\defvarparsebody\Edefvar\defvarx\defvarheader}
\def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
-\begingroup\defname {#1}{Variable}%
+\begingroup\defname {#1}{\putwordDefvar}%
\defvarargs {#2}\endgroup %
}
@@ -4314,7 +4820,7 @@ width0pt\relax} \fi
\def\defopt{\defvarparsebody\Edefopt\defoptx\defoptheader}
\def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
-\begingroup\defname {#1}{User Option}%
+\begingroup\defname {#1}{\putwordDefopt}%
\defvarargs {#2}\endgroup %
}
@@ -4326,9 +4832,9 @@ width0pt\relax} \fi
% is actually part of the data type, which should not be put into the index.
\def\deftypevarheader #1#2{%
\dovarind#2 \relax% Make entry in variables index
-\begingroup\defname {\defheaderxcond#1\relax$$$#2}{Variable}%
+\begingroup\defname {\defheaderxcond#1\relax$$$#2}{\putwordDeftypevar}%
\interlinepenalty=10000
-\endgraf\penalty 10000\vskip -\parskip\penalty 10000
+\endgraf\nobreak\vskip -\parskip\nobreak
\endgroup}
\def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}}
@@ -4339,18 +4845,9 @@ width0pt\relax} \fi
\def\deftypevrheader #1#2#3{\dovarind#3 \relax%
\begingroup\defname {\defheaderxcond#2\relax$$$#3}{#1}
\interlinepenalty=10000
-\endgraf\penalty 10000\vskip -\parskip\penalty 10000
+\endgraf\nobreak\vskip -\parskip\nobreak
\endgroup}
-% This definition is run if you use @defvarx
-% anywhere other than immediately after a @defvar or @defvarx.
-
-\def\defvrx #1 {\errmessage{@defvrx in invalid context}}
-\def\defvarx #1 {\errmessage{@defvarx in invalid context}}
-\def\defoptx #1 {\errmessage{@defoptx in invalid context}}
-\def\deftypevarx #1 {\errmessage{@deftypevarx in invalid context}}
-\def\deftypevrx #1 {\errmessage{@deftypevrx in invalid context}}
-
% Now define @deftp
% Args are printed in bold, a slight difference from @defvar.
@@ -4363,33 +4860,66 @@ width0pt\relax} \fi
\def\deftpheader #1#2#3{\doind {tp}{\code{#2}}%
\begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup}
-% This definition is run if you use @deftpx, etc
-% anywhere other than immediately after a @deftp, etc.
-
-\def\deftpx #1 {\errmessage{@deftpx in invalid context}}
+% These definitions are used if you use @defunx (etc.)
+% anywhere other than immediately after a @defun or @defunx.
+%
+\def\defcvx#1 {\errmessage{@defcvx in invalid context}}
+\def\deffnx#1 {\errmessage{@deffnx in invalid context}}
+\def\defivarx#1 {\errmessage{@defivarx in invalid context}}
+\def\defmacx#1 {\errmessage{@defmacx in invalid context}}
+\def\defmethodx#1 {\errmessage{@defmethodx in invalid context}}
+\def\defoptx #1 {\errmessage{@defoptx in invalid context}}
+\def\defopx#1 {\errmessage{@defopx in invalid context}}
+\def\defspecx#1 {\errmessage{@defspecx in invalid context}}
+\def\deftpx#1 {\errmessage{@deftpx in invalid context}}
+\def\deftypefnx#1 {\errmessage{@deftypefnx in invalid context}}
+\def\deftypefunx#1 {\errmessage{@deftypefunx in invalid context}}
+\def\deftypeivarx#1 {\errmessage{@deftypeivarx in invalid context}}
+\def\deftypemethodx#1 {\errmessage{@deftypemethodx in invalid context}}
+\def\deftypeopx#1 {\errmessage{@deftypeopx in invalid context}}
+\def\deftypevarx#1 {\errmessage{@deftypevarx in invalid context}}
+\def\deftypevrx#1 {\errmessage{@deftypevrx in invalid context}}
+\def\defunx#1 {\errmessage{@defunx in invalid context}}
+\def\defvarx#1 {\errmessage{@defvarx in invalid context}}
+\def\defvrx#1 {\errmessage{@defvrx in invalid context}}
\message{macros,}
% @macro.
-% To do this right we need a feature of e-TeX, \scantokens,
+% To do this right we need a feature of e-TeX, \scantokens,
% which we arrange to emulate with a temporary file in ordinary TeX.
\ifx\eTeXversion\undefined
\newwrite\macscribble
- \def\scantokens#1{%
-% \toks0={#1}%
+ \def\scanmacro#1{%
+ \begingroup \newlinechar`\^^M
+ % Undo catcode changes of \startcontents and \doprintindex
+ \catcode`\@=0 \catcode`\\=12 \escapechar=`\@
+ % Append \endinput to make sure that TeX does not see the ending newline.
+ \toks0={#1\endinput}%
\immediate\openout\macscribble=\jobname.tmp
- \immediate\write\macscribble{#1}%\the\toks0}%
+ \immediate\write\macscribble{\the\toks0}%
\immediate\closeout\macscribble
+ \let\xeatspaces\eatspaces
\input \jobname.tmp
+ \endgroup
}
+\else
+\def\scanmacro#1{%
+\begingroup \newlinechar`\^^M
+% Undo catcode changes of \startcontents and \doprintindex
+\catcode`\@=0 \catcode`\\=12 \escapechar=`\@
+\let\xeatspaces\eatspaces\scantokens{#1\endinput}\endgroup}
\fi
\newcount\paramno % Count of parameters
\newtoks\macname % Macro name
\newif\ifrecursive % Is it recursive?
+\def\macrolist{} % List of all defined macros in the form
+ % \do\macro1\do\macro2...
-% Utility: does \let #1 = #2, except with \csnames.
+% Utility routines.
+% Thisdoes \let #1 = #2, except with \csnames.
\def\cslet#1#2{%
\expandafter\expandafter
\expandafter\let
@@ -4397,10 +4927,31 @@ width0pt\relax} \fi
\csname#1\endcsname
\csname#2\endcsname}
+% Trim leading and trailing spaces off a string.
+% Concepts from aro-bend problem 15 (see CTAN).
+{\catcode`\@=11
+\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }}
+\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@}
+\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @}
+\def\unbrace#1{#1}
+\unbrace{\gdef\trim@@@ #1 } #2@{#1}
+}
+
+% Trim a single trailing ^^M off a string.
+{\catcode`\^^M=12\catcode`\Q=3%
+\gdef\eatcr #1{\eatcra #1Q^^MQ}%
+\gdef\eatcra#1^^MQ{\eatcrb#1Q}%
+\gdef\eatcrb#1Q#2Q{#1}%
+}
+
% Macro bodies are absorbed as an argument in a context where
% all characters are catcode 10, 11 or 12, except \ which is active
% (as in normal texinfo). It is necessary to change the definition of \.
+% It's necessary to have hard CRs when the macro is executed. This is
+% done by making ^^M (\endlinechar) catcode 12 when reading the macro
+% body, and then making it the \newlinechar in \scanmacro.
+
\def\macrobodyctxt{%
\catcode`\~=12
\catcode`\^=12
@@ -4412,136 +4963,185 @@ width0pt\relax} \fi
\catcode`\{=12
\catcode`\}=12
\catcode`\@=12
- \catcode`\^^M=10
+ \catcode`\^^M=12
\usembodybackslash}
+\def\macroargctxt{%
+ \catcode`\~=12
+ \catcode`\^=12
+ \catcode`\_=12
+ \catcode`\|=12
+ \catcode`\<=12
+ \catcode`\>=12
+ \catcode`\+=12
+ \catcode`\@=12
+ \catcode`\\=12}
+
% \mbodybackslash is the definition of \ in @macro bodies.
-% It maps \foo\ => \csname macarg.foo\endcsname => #N
+% It maps \foo\ => \csname macarg.foo\endcsname => #N
% where N is the macro parameter number.
% We define \csname macarg.\endcsname to be \realbackslash, so
% \\ in macro replacement text gets you a backslash.
-{\catcode`@=0 \catcode`\\=\active
+{\catcode`@=0 @catcode`@\=@active
@gdef@usembodybackslash{@let\=@mbodybackslash}
@gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
}
\expandafter\def\csname macarg.\endcsname{\realbackslash}
-% The catcode games are necessary because @macro may or may not
-% have a brace-surrounded list of arguments, and we need to do
-% different stuff in each case. Making {, } \other is the only
-% way to prevent their being deleted by the tokenizer.
-\def\macro{\recursivefalse
- \bgroup\catcode`\{=\other\catcode`\}=\other\parsearg\macroxxx}
-\def\rmacro{\recursivetrue
- \bgroup\catcode`\{=\other\catcode`\}=\other\parsearg\macroxxx}
-
-\def\macroxxx#1{\egroup % started in \macro
- \getargs{#1}% now \macname is the macname and \toks0 the arglist
- \edef\temp{\the\toks0}%
- \ifx\temp\empty % no arguments
+\def\macro{\recursivefalse\parsearg\macroxxx}
+\def\rmacro{\recursivetrue\parsearg\macroxxx}
+
+\def\macroxxx#1{%
+ \getargs{#1}% now \macname is the macname and \argl the arglist
+ \ifx\argl\empty % no arguments
\paramno=0%
\else
- \expandafter\parsemargdef \the\toks0;%
+ \expandafter\parsemargdef \argl;%
\fi
- \expandafter\ifx \csname macsave.\the\macname\endcsname \relax
- \cslet{macsave.\the\macname}{\the\macname}%
- \else
+ \if1\csname ismacro.\the\macname\endcsname
\message{Warning: redefining \the\macname}%
+ \else
+ \expandafter\ifx\csname \the\macname\endcsname \relax
+ \else \errmessage{The name \the\macname\space is reserved}\fi
+ \global\cslet{macsave.\the\macname}{\the\macname}%
+ \global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
+ % Add the macroname to \macrolist
+ \toks0 = \expandafter{\macrolist\do}%
+ \xdef\macrolist{\the\toks0
+ \expandafter\noexpand\csname\the\macname\endcsname}%
\fi
\begingroup \macrobodyctxt
\ifrecursive \expandafter\parsermacbody
- \else \expandafter\parsemacbody
+ \else \expandafter\parsemacbody
\fi}
\def\unmacro{\parsearg\unmacroxxx}
-\def\unmacroxxx#1{
- \expandafter\ifx \csname macsave.\the\macname\endcsname \relax
- \errmessage{Macro \the\macname\ not defined.}%
+\def\unmacroxxx#1{%
+ \if1\csname ismacro.#1\endcsname
+ \global\cslet{#1}{macsave.#1}%
+ \global\expandafter\let \csname ismacro.#1\endcsname=0%
+ % Remove the macro name from \macrolist
+ \begingroup
+ \edef\tempa{\expandafter\noexpand\csname#1\endcsname}%
+ \def\do##1{%
+ \def\tempb{##1}%
+ \ifx\tempa\tempb
+ % remove this
+ \else
+ \toks0 = \expandafter{\newmacrolist\do}%
+ \edef\newmacrolist{\the\toks0\expandafter\noexpand\tempa}%
+ \fi}%
+ \def\newmacrolist{}%
+ % Execute macro list to define \newmacrolist
+ \macrolist
+ \global\let\macrolist\newmacrolist
+ \endgroup
\else
- \cslet{#1}{macsave.#1}%
- \expandafter\let \csname macsave.\the\macname\endcsname \undefined
+ \errmessage{Macro #1 not defined}%
\fi
}
+% This makes use of the obscure feature that if the last token of a
+% <parameter list> is #, then the preceding argument is delimited by
+% an opening brace, and that opening brace is not consumed.
+\def\getargs#1{\getargsxxx#1{}}
+\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
+\def\getmacname #1 #2\relax{\macname={#1}}
+\def\getmacargs#1{\def\argl{#1}}
+
% Parse the optional {params} list. Set up \paramno and \paramlist
% so \defmacro knows what to do. Define \macarg.blah for each blah
% in the params list, to be ##N where N is the position in that list.
% That gets used by \mbodybackslash (above).
-% This code has to take great care with `macro parameter char #'. The
-% eight hashes in a row on the macarg.#1 line collapse to four in the
-% definition of \macarg.blah, to two when \parsemacbody expands the
-% macro replacement text, and to one when \defmacro writes the macro
-% definiton. The games with \twohash are to postpone expansion till
-% the very end, when \parsemargdefyyy crunches \paramlist into
-% something that can be splatted into a \expandafter\def\blah line (in
-% \defmacro).
-\def\parsemargdef#1;{\paramno=0\def\paramlist{}\parsemargdefxxx#1,;,}
+% We need to get `macro parameter char #' into several definitions.
+% The technique used is stolen from LaTeX: let \hash be something
+% unexpandable, insert that wherever you need a #, and then redefine
+% it to # just before using the token list produced.
+%
+% The same technique is used to protect \eatspaces till just before
+% the macro is used.
+
+\def\parsemargdef#1;{\paramno=0\def\paramlist{}%
+ \let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,}
\def\parsemargdefxxx#1,{%
- \let\twohash\relax
- \if#1;\let\next=\parsemargdefyyy
+ \if#1;\let\next=\relax
\else \let\next=\parsemargdefxxx
\advance\paramno by 1%
- \expandafter\edef\csname macarg.#1\endcsname{########\the\paramno}%
- \edef\paramlist{\paramlist\twohash\twohash\the\paramno,}%
+ \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
+ {\xeatspaces{\hash\the\paramno}}%
+ \edef\paramlist{\paramlist\hash\the\paramno,}%
\fi\next}
-\def\parsemargdefyyy{\let\twohash##\relax \edef\paramlist{\paramlist}}
% These two commands read recursive and nonrecursive macro bodies.
% (They're different since rec and nonrec macros end differently.)
\long\def\parsemacbody#1@end macro%
-{\xdef\temp{#1} \endgroup\defmacro}%
-\long\def\parsermacbody#1@end macro%
-{\xdef\temp{#1} \endgroup\defmacro}%
-
+{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
+\long\def\parsermacbody#1@end rmacro%
+{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
% This defines the macro itself. There are six cases: recursive and
% nonrecursive macros of zero, one, and many arguments.
% Much magic with \expandafter here.
+% \xdef is used so that macro definitions will survive the file
+% they're defined in; @include reads the file inside a group.
\def\defmacro{%
+ \let\hash=##% convert placeholders to macro parameter chars
\ifrecursive
\ifcase\paramno
% 0
- \expandafter\edef\csname\the\macname\endcsname{%
- \noexpand\scantokens{\temp}}%
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \noexpand\scanmacro{\temp}}%
\or % 1
- \expandafter\edef\csname\the\macname\endcsname{%
- \noexpand\braceorline\csname\the\macname xxx\endcsname}%
- \expandafter\edef\csname\the\macname xxx\endcsname##1{%
- \noexpand\scantokens{\temp}}%
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \bgroup\noexpand\macroargctxt
+ \noexpand\braceorline
+ \expandafter\noexpand\csname\the\macname xxx\endcsname}%
+ \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
+ \egroup\noexpand\scanmacro{\temp}}%
\else % many
- \expandafter\edef\csname\the\macname\endcsname##1{%
- \csname\the\macname xxx\endcsname ##1,}%
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \bgroup\noexpand\macroargctxt
+ \noexpand\csname\the\macname xx\endcsname}%
+ \expandafter\xdef\csname\the\macname xx\endcsname##1{%
+ \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
\expandafter\expandafter
- \expandafter\edef
+ \expandafter\xdef
\expandafter\expandafter
- \csname\the\macname xxx\endcsname
- \paramlist{\noexpand\scantokens{\temp}}%
+ \csname\the\macname xxx\endcsname
+ \paramlist{\egroup\noexpand\scanmacro{\temp}}%
\fi
\else
\ifcase\paramno
% 0
- \expandafter\edef\csname\the\macname\endcsname{%
+ \expandafter\xdef\csname\the\macname\endcsname{%
\noexpand\norecurse{\the\macname}%
- \noexpand\scantokens{\temp}\egroup}%
+ \noexpand\scanmacro{\temp}\egroup}%
\or % 1
- \expandafter\edef\csname\the\macname\endcsname{%
- \noexpand\braceorline\csname\the\macname xxx\endcsname}%
- \expandafter\edef\csname\the\macname xxx\endcsname##1{%
- \noexpand\norecurse{\the\macname}
- \noexpand\scantokens{\temp}\egroup}%
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \bgroup\noexpand\macroargctxt
+ \noexpand\braceorline
+ \expandafter\noexpand\csname\the\macname xxx\endcsname}%
+ \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
+ \egroup
+ \noexpand\norecurse{\the\macname}%
+ \noexpand\scanmacro{\temp}\egroup}%
\else % many
- \expandafter\edef\csname\the\macname\endcsname##1{%
- \csname\the\macname xxx\endcsname ##1,}%
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \bgroup\noexpand\macroargctxt
+ \expandafter\noexpand\csname\the\macname xx\endcsname}%
+ \expandafter\xdef\csname\the\macname xx\endcsname##1{%
+ \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
\expandafter\expandafter
- \expandafter\edef
+ \expandafter\xdef
\expandafter\expandafter
\csname\the\macname xxx\endcsname
\paramlist{%
- \noexpand\norecurse{\the\macname}
- \noexpand\scantokens{\temp}\egroup}%
+ \egroup
+ \noexpand\norecurse{\the\macname}%
+ \noexpand\scanmacro{\temp}\egroup}%
\fi
\fi}
@@ -4554,35 +5154,29 @@ width0pt\relax} \fi
\def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx}
\def\braceorlinexxx{%
\ifx\nchar\bgroup\else
- \expandafter\parsearg
+ \expandafter\parsearg
\fi \next}
-% We need {} to be \other inside these commands. [] are temporary
-% grouping symbols.
-\begingroup
-\catcode`\{=\other \catcode`\}=\other
-\catcode`\[=1 \catcode`\]=2
-
-% @macro can be called with or without a brace-surrounded macro
-% argument list. These three sequences extract the macro name and arg
-% list in hopefully all cases. Note that anything on the line after the
-% first pair of braces will be thrown out (Makeinfo puts it into the
-% macro body).
-\gdef\getargs#1[\getargsxxx|#1 {}|]
-\gdef\getargsxxx|#1 {#2}#3|[%
- \toks0=[#2]%
- \edef\tmp[\the\toks0]%
- \ifx\tmp\empty
- \getargsnospaces|#1{}|%
- \else
- \macname=[#1]%
- \fi]
-\gdef\getargsnospaces|#1{#2}#3|[\macname=[#1]\toks0=[#2]]
+% We mant to disable all macros during \shipout so that they are not
+% expanded by \write.
+\def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}%
+ \edef\next{\macrolist}\expandafter\endgroup\next}
-\endgroup
+
+% @alias.
+% We need some trickery to remove the optional spaces around the equal
+% sign. Just make them active and then expand them all to nothing.
+\def\alias{\begingroup\obeyspaces\parsearg\aliasxxx}
+\def\aliasxxx #1{\aliasyyy#1\relax}
+\def\aliasyyy #1=#2\relax{\ignoreactivespaces
+\edef\next{\global\let\expandafter\noexpand\csname#1\endcsname=%
+ \expandafter\noexpand\csname#2\endcsname}%
+\expandafter\endgroup\next}
\message{cross references,}
+% @xref etc.
+
\newwrite\auxfile
\newif\ifhavexrefs % True if xref values are known.
@@ -4593,33 +5187,67 @@ width0pt\relax} \fi
\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
node \samp{\ignorespaces#1{}}}
-% @setref{foo} defines a cross-reference point named foo.
+% @node's job is to define \lastnode.
+\def\node{\ENVcheck\parsearg\nodezzz}
+\def\nodezzz#1{\nodexxx [#1,]}
+\def\nodexxx[#1,#2]{\gdef\lastnode{#1}}
+\let\nwnode=\node
+\let\lastnode=\relax
-\def\setref#1{%
-\dosetq{#1-title}{Ytitle}%
-\dosetq{#1-pg}{Ypagenumber}%
-\dosetq{#1-snt}{Ysectionnumberandtype}}
+% The sectioning commands (@chapter, etc.) call these.
+\def\donoderef{%
+ \ifx\lastnode\relax\else
+ \expandafter\expandafter\expandafter\setref{\lastnode}%
+ {Ysectionnumberandtype}%
+ \global\let\lastnode=\relax
+ \fi
+}
+\def\unnumbnoderef{%
+ \ifx\lastnode\relax\else
+ \expandafter\expandafter\expandafter\setref{\lastnode}{Ynothing}%
+ \global\let\lastnode=\relax
+ \fi
+}
+\def\appendixnoderef{%
+ \ifx\lastnode\relax\else
+ \expandafter\expandafter\expandafter\setref{\lastnode}%
+ {Yappendixletterandtype}%
+ \global\let\lastnode=\relax
+ \fi
+}
-\def\unnumbsetref#1{%
-\dosetq{#1-title}{Ytitle}%
-\dosetq{#1-pg}{Ypagenumber}%
-\dosetq{#1-snt}{Ynothing}}
-\def\appendixsetref#1{%
-\dosetq{#1-title}{Ytitle}%
-\dosetq{#1-pg}{Ypagenumber}%
-\dosetq{#1-snt}{Yappendixletterandtype}}
+% @anchor{NAME} -- define xref target at arbitrary point.
+%
+\newcount\savesfregister
+\gdef\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
+\gdef\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
+\gdef\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
+
+% \setref{NAME}{SNT} defines a cross-reference point NAME, namely
+% NAME-title, NAME-pg, and NAME-SNT. Called from \foonoderef. We have
+% to set \indexdummies so commands such as @code in a section title
+% aren't expanded. It would be nicer not to expand the titles in the
+% first place, but there's so many layers that that is hard to do.
+%
+\def\setref#1#2{{%
+ \indexdummies
+ \pdfmkdest{#1}%
+ \dosetq{#1-title}{Ytitle}%
+ \dosetq{#1-pg}{Ypagenumber}%
+ \dosetq{#1-snt}{#2}%
+}}
-% \xref, \pxref, and \ref generate cross-references to specified points.
-% For \xrefX, #1 is the node name, #2 the name of the Info
-% cross-reference, #3 the printed node name, #4 the name of the Info
-% file, #5 the name of the printed manual. All but the node name can be
-% omitted.
+% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
+% the node name, #2 the name of the Info cross-reference, #3 the printed
+% node name, #4 the name of the Info file, #5 the name of the printed
+% manual. All but the node name can be omitted.
%
\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
\def\ref#1{\xrefX[#1,,,,,,,]}
\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
+ \unsepspaces
\def\printedmanual{\ignorespaces #5}%
\def\printednodename{\ignorespaces #3}%
\setbox1=\hbox{\printedmanual}%
@@ -4632,7 +5260,7 @@ width0pt\relax} \fi
\else
% Use the actual chapter/section title appear inside
% the square brackets. Use the real section title if we have it.
- \ifdim \wd1>0pt%
+ \ifdim \wd1 > 0pt
% It is in another manual, so we don't have it.
\def\printednodename{\ignorespaces #1}%
\else
@@ -4653,18 +5281,39 @@ width0pt\relax} \fi
% are best written with fairly long node names, containing hyphens, this
% is a loss. Therefore, we give the text of the node name again, so it
% is as if TeX is seeing it for the first time.
+ \ifpdf
+ \leavevmode
+ \getfilename{#4}%
+ \ifnum\filenamelength>0
+ \startlink attr{/Border [0 0 0]}%
+ goto file{\the\filename.pdf} name{#1@}%
+ \else
+ \startlink attr{/Border [0 0 0]}%
+ goto name{#1@}%
+ \fi
+ \linkcolor
+ \fi
+ %
\ifdim \wd1 > 0pt
- \putwordsection{} ``\printednodename'' in \cite{\printedmanual}%
+ \putwordsection{} ``\printednodename'' \putwordin{} \cite{\printedmanual}%
\else
% _ (for example) has to be the character _ for the purposes of the
% control sequence corresponding to the node, but it has to expand
% into the usual \leavevmode...\vrule stuff for purposes of
% printing. So we \turnoffactive for the \refx-snt, back on for the
% printing, back off for the \refx-pg.
- {\normalturnoffactive \refx{#1-snt}{}}%
- \space [\printednodename],\space
+ {\normalturnoffactive
+ % Only output a following space if the -snt ref is nonempty; for
+ % @unnumbered and @anchor, it won't be.
+ \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
+ \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
+ }%
+ % [mynode],
+ [\printednodename],\space
+ % page 3
\turnoffactive \putwordpage\tie\refx{#1-pg}{}%
\fi
+ \endlink
\endgroup}
% \dosetq is the interface for calls from other macros
@@ -4672,7 +5321,7 @@ width0pt\relax} \fi
% Use \normalturnoffactive so that punctuation chars such as underscore
% and backslash work in node names. (\turnoffactive doesn't do \.)
\def\dosetq#1#2{%
- {\let\folio=0
+ {\let\folio=0%
\normalturnoffactive
\edef\next{\write\auxfile{\internalsetq{#1}{#2}}}%
\iflinks
@@ -4749,7 +5398,7 @@ width0pt\relax} \fi
}
% This is the macro invoked by entries in the aux file.
-%
+%
\def\xrdef#1{\begingroup
% Reenable \ as an escape while reading the second argument.
\catcode`\\ = 0
@@ -4901,6 +5550,8 @@ width0pt\relax} \fi
\xspaceskip\z@skip
\parindent\defaultparindent
%
+ \smallfonts \rm
+ %
% Hang the footnote text off the number.
\hang
\textindent{\thisfootno}%
@@ -4915,7 +5566,7 @@ width0pt\relax} \fi
\else\let\next\f@t\fi \next}
\def\f@@t{\bgroup\aftergroup\@foot\let\next}
\def\f@t#1{#1\@foot}
-\def\@foot{\strut\egroup}
+\def\@foot{\strut\par\egroup}
}%end \catcode `\@=11
@@ -4974,7 +5625,7 @@ width0pt\relax} \fi
% @image. We use the macros from epsf.tex to support this.
% If epsf.tex is not installed and @image is used, we complain.
-%
+%
% Check for and read epsf.tex up front. If we read it only at @image
% time, we might be inside a group, and then its definitions would get
% undone and the next image would fail.
@@ -4987,12 +5638,12 @@ width0pt\relax} \fi
\input epsf.tex
\fi
%
+% We will only complain once about lack of epsf.tex.
\newif\ifwarnednoepsf
\newhelp\noepsfhelp{epsf.tex must be installed for images to
work. It is also included in the Texinfo distribution, or you can get
- it from ftp://ftp.tug.org/tex/epsf.tex.}
+ it from ftp://tug.org/tex/epsf.tex.}
%
-% Only complain once about lack of epsf.tex.
\def\image#1{%
\ifx\epsfbox\undefined
\ifwarnednoepsf \else
@@ -5010,21 +5661,68 @@ width0pt\relax} \fi
% #2 is (optional) width, #3 is (optional) height.
% #4 is just the usual extra ignored arg for parsing this stuff.
\def\imagexxx#1,#2,#3,#4\finish{%
- % \epsfbox itself resets \epsf?size at each figure.
- \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
- \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
- % If the image is by itself, center it.
- \ifvmode
- \centerline{\epsfbox{#1.eps}}%
+ \ifpdf
+ \centerline{\dopdfimage{#1}{#2}{#3}}%
+ \else
+ % \epsfbox itself resets \epsf?size at each figure.
+ \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
+ \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
+ \begingroup
+ \catcode`\^^M = 5 % in case we're inside an example
+ % If the image is by itself, center it.
+ \ifvmode
+ \nobreak\bigskip
+ % Usually we'll have text after the image which will insert
+ % \parskip glue, so insert it here too to equalize the space
+ % above and below.
+ \nobreak\vskip\parskip
+ \nobreak
+ \centerline{\epsfbox{#1.eps}}%
+ \bigbreak
+ \else
+ % In the middle of a paragraph, no extra space.
+ \epsfbox{#1.eps}%
+ \fi
+ \endgroup
+ \fi
+}
+
+
+\message{localization,}
+% and i18n.
+
+% @documentlanguage is usually given very early, just after
+% @setfilename. If done too late, it may not override everything
+% properly. Single argument is the language abbreviation.
+% It would be nice if we could set up a hyphenation file here.
+%
+\def\documentlanguage{\parsearg\dodocumentlanguage}
+\def\dodocumentlanguage#1{%
+ \tex % read txi-??.tex file in plain TeX.
+ % Read the file if it exists.
+ \openin 1 txi-#1.tex
+ \ifeof1
+ \errhelp = \nolanghelp
+ \errmessage{Cannot read language file txi-#1.tex}%
+ \let\temp = \relax
\else
- \epsfbox{#1.eps}%
+ \def\temp{\input txi-#1.tex }%
\fi
+ \temp
+ \endgroup
}
+\newhelp\nolanghelp{The given language definition file cannot be found or
+is empty. Maybe you need to install it? In the current directory
+should work if nowhere else does.}
+
+% @documentencoding should change something in TeX eventually, most
+% likely, but for now just recognize it.
+\let\documentencoding = \comment
-\message{paper sizes,}
-% And other related parameters.
+% Page size parameters.
+%
\newdimen\defaultparindent \defaultparindent = 15pt
\chapheadingskip = 15pt plus 4pt minus 2pt
@@ -5034,6 +5732,9 @@ width0pt\relax} \fi
% Prevent underfull vbox error messages.
\vbadness = 10000
+% Don't be so finicky about underfull hboxes, either.
+\hbadness = 2000
+
% Following George Bush, just get rid of widows and orphans.
\widowpenalty=10000
\clubpenalty=10000
@@ -5041,16 +5742,14 @@ width0pt\relax} \fi
% Use TeX 3.0's \emergencystretch to help line breaking, but if we're
% using an old version of TeX, don't do anything. We want the amount of
% stretch added to depend on the line length, hence the dependence on
-% \hsize. This makes it come to about 9pt for the 8.5x11 format. We
-% call this whenever the paper size is set.
+% \hsize. We call this whenever the paper size is set.
%
\def\setemergencystretch{%
\ifx\emergencystretch\thisisundefined
% Allow us to assign to \emergencystretch anyway.
\def\emergencystretch{\dimen0}%
\else
- \emergencystretch = \hsize
- \divide\emergencystretch by 45
+ \emergencystretch = .15\hsize
\fi
}
@@ -5104,9 +5803,10 @@ width0pt\relax} \fi
\deftypemargin = 0pt
\defbodyindent = .5cm
%
- \let\smalllisp = \smalllispx
+ \let\smalldisplay = \smalldisplayx
\let\smallexample = \smalllispx
- \def\Esmallexample{\Esmalllisp}%
+ \let\smallformat = \smallformatx
+ \let\smalllisp = \smalllispx
}}
% Use @afourpaper to print on European A4 paper.
@@ -5114,7 +5814,7 @@ width0pt\relax} \fi
\setleading{12pt}%
\parskip = 3pt plus 2pt minus 1pt
%
- \internalpagesizes{53\baselineskip}{6.5in}{\voffset}{.25in}{\bindingoffset}{44pt}%
+ \internalpagesizes{53\baselineskip}{160mm}{\voffset}{4mm}{\bindingoffset}{44pt}%
%
\tolerance = 700
\hfuzz = 1pt
@@ -5134,7 +5834,7 @@ width0pt\relax} \fi
% Use @afourwide to print on European A4 paper in wide format.
\def\afourwide{%
\afourpaper
- \internalpagesizes{9.5in}{6.5in}{\hoffset}{\normaloffset}{\bindingoffset}{7mm}%
+ \internalpagesizes{6.5in}{9.5in}{\hoffset}{\normaloffset}{\bindingoffset}{7mm}%
%
\globaldefs = 0
}
@@ -5142,7 +5842,7 @@ width0pt\relax} \fi
% @pagesizes TEXTHEIGHT[,TEXTWIDTH]
% Perhaps we should allow setting the margins, \topskip, \parskip,
% and/or leading, also. Or perhaps we should compute them somehow.
-%
+%
\def\pagesizes{\parsearg\pagesizesxxx}
\def\pagesizesxxx#1{\pagesizesyyy #1,,\finish}
\def\pagesizesyyy#1,#2,#3\finish{{%
@@ -5156,9 +5856,10 @@ width0pt\relax} \fi
}}
% Set default to letter.
-%
+%
\letterpaper
+
\message{and turning on texinfo input format.}
% Define macros to output various characters with catcode for normal text.
@@ -5170,6 +5871,7 @@ width0pt\relax} \fi
\catcode`\<=\other
\catcode`\>=\other
\catcode`\+=\other
+\catcode`\$=\other
\def\normaldoublequote{"}
\def\normaltilde{~}
\def\normalcaret{^}
@@ -5178,6 +5880,7 @@ width0pt\relax} \fi
\def\normalless{<}
\def\normalgreater{>}
\def\normalplus{+}
+\def\normaldollar{$}
% This macro is used to make a character print one way in ttfont
% where it can probably just be output, and another way in other fonts,
@@ -5188,7 +5891,13 @@ width0pt\relax} \fi
% interword stretch (and shrink), and it is reasonable to expect all
% typewriter fonts to have this, we can check that font parameter.
%
-\def\ifusingtt#1#2{\ifdim \fontdimen3\the\font=0pt #1\else #2\fi}
+\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
+
+% Same as above, but check for italic font. Actually this also catches
+% non-italic slanted fonts since it is impossible to distinguish them from
+% italic fonts. But since this is only used by $ and it uses \sl anyway
+% this is not a problem.
+\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
% Turn off all special characters except @
% (and those which the user can use as if they were ordinary).
@@ -5219,6 +5928,8 @@ width0pt\relax} \fi
\def>{{\tt \gtr}}
\catcode`\+=\active
\def+{{\tt \char 43}}
+\catcode`\$=\active
+\def${\ifusingit{{\sl\$}}\normaldollar}
%\catcode 27=\active
%\def^^[{$\diamondsuit$}
@@ -5249,9 +5960,6 @@ width0pt\relax} \fi
% \normalbackslash outputs one backslash in fixed width font.
\def\normalbackslash{{\tt\rawbackslashxx}}
-% Say @foo, not \foo, in error messages.
-\escapechar=`\@
-
% \catcode 17=0 % Define control-q
\catcode`\\=\active
@@ -5265,7 +5973,8 @@ width0pt\relax} \fi
@let|=@normalverticalbar
@let<=@normalless
@let>=@normalgreater
-@let+=@normalplus}
+@let+=@normalplus
+@let$=@normaldollar}
@def@normalturnoffactive{@let"=@normaldoublequote
@let\=@normalbackslash
@@ -5275,7 +5984,8 @@ width0pt\relax} \fi
@let|=@normalverticalbar
@let<=@normalless
@let>=@normalgreater
-@let+=@normalplus}
+@let+=@normalplus
+@let$=@normaldollar}
% Make _ and + \other characters, temporarily.
% This is canceled by @fixbackslash.
@@ -5294,20 +6004,29 @@ width0pt\relax} \fi
% Also back turn on active characters that might appear in the input
% file name, in case not using a pre-dumped format.
%
-@gdef@fixbackslash{@ifx\@eatinput @let\ = @normalbackslash @fi
- @catcode`+=@active @catcode`@_=@active}
+@gdef@fixbackslash{%
+ @ifx\@eatinput @let\ = @normalbackslash @fi
+ @catcode`+=@active
+ @catcode`@_=@active
+}
+
+% Say @foo, not \foo, in error messages.
+@escapechar = `@@
-% These look ok in all fonts, so just make them not special. The @rm below
-% makes sure that the current font starts out as the newly loaded cmr10
-@catcode`@$=@other @catcode`@%=@other @catcode`@&=@other @catcode`@#=@other
+% These look ok in all fonts, so just make them not special.
+@catcode`@& = @other
+@catcode`@# = @other
+@catcode`@% = @other
+@c Set initial fonts.
@textfonts
@rm
+
@c Local variables:
@c eval: (add-hook 'write-file-hooks 'time-stamp)
@c page-delimiter: "^\\\\message"
@c time-stamp-start: "def\\\\texinfoversion{"
-@c time-stamp-format: "%:y-%02m-%02d"
+@c time-stamp-format: "%:y-%02m-%02d.%02H"
@c time-stamp-end: "}"
@c End: