diff --git a/configure b/configure
index cc31f62b8d5886052490a1b432e3779989696ef8..936c20fe3148172add1590a6fc757d7d95d8a0b7 100755
--- a/configure
+++ b/configure
@@ -3548,6 +3548,15 @@ esac
# Otherwise, enable COBOL only for known architectures
case ,${enable_languages}, in
*,cobol,*)
+ case ,${enable_languages}, in
+ *,c++,*)
+ ;;
+ *)
+ # We have an explicit cobol, but no c++. We need c++, because cobol
+ # requires libstdc++
+ enable_languages="$enable_languages,c++"
+ ;;
+ esac
;;
*)
case "${target}" in
@@ -3561,8 +3570,8 @@ case ,${enable_languages}, in
x86_64-*-*|aarch64-*-*)
;;
*-*-*)
- unsupported_languages="$unsupported_languages cobol"
- ;;
+ unsupported_languages="$unsupported_languages cobol"
+ ;;
esac
;;
esac
diff --git a/configure.ac b/configure.ac
index 47d24cef3dd655518d49e1b1ac0ff89c48e409b2..22a2b13876ec2f106ab9941039c457604d261714 100644
--- a/configure.ac
+++ b/configure.ac
@@ -768,21 +768,30 @@ esac
# Otherwise, enable COBOL only for known architectures
case ,${enable_languages}, in
*,cobol,*)
+ case ,${enable_languages}, in
+ *,c++,*)
+ ;;
+ *)
+ # We have an explicit cobol, but no c++. We need c++, because cobol
+ # requires libstdc++
+ enable_languages="$enable_languages,c++"
+ ;;
+ esac
;;
*)
case "${target}" in
x86_64-*-*|aarch64-*-*)
;;
*-*-*)
- unsupported_languages="$unsupported_languages cobol"
- ;;
+ unsupported_languages="$unsupported_languages cobol"
+ ;;
esac
case "${host}" in
x86_64-*-*|aarch64-*-*)
;;
*-*-*)
- unsupported_languages="$unsupported_languages cobol"
- ;;
+ unsupported_languages="$unsupported_languages cobol"
+ ;;
esac
;;
esac
diff --git a/gcc/cobol/Make-lang.in b/gcc/cobol/Make-lang.in
index c26cb57a7bf848e0220032b476bd3fc760aeb890..de967e3d78ebb05fce28e490e769bffd7a51c402 100644
--- a/gcc/cobol/Make-lang.in
+++ b/gcc/cobol/Make-lang.in
@@ -49,12 +49,16 @@ LIB_SOURCE ?= $(srcdir)/../libgcobol
# altered. CFLAGS and CXXFLAGS are being established upstream, and thus
# cannot, at this point, be changed.
#
+# Note further that we are producing only a 64-bit version of libgcobol.so, so
+# it is safe to hard-code the lib64 location. This obviously has to match the
+# installation code in libgcobol/Makefile.in
+#
CPPFLAGS = \
-std=c++14 \
-Iinclude \
-I$(BINCLUDE) \
-I$(LIB_INCLUDE) \
- -DEXEC_LIB=\"$(PREFIX)/$(libdir)\" \
+ -DEXEC_LIB=\"$(prefix)/lib64\" \
$(END)
YFLAGS = -Werror -Wmidrule-values -Wno-yacc \
@@ -99,7 +103,6 @@ cobol/charmaps.cc: $(LIB_SOURCE)/charmaps.cc
cp $^ $@
cobol/valconv.cc: $(LIB_SOURCE)/valconv.cc
- echo "RUN IN CIRCLES SCREAM AND SHOUT**********************************"
cp $^ $@
LIB_SOURCE_H=$(wildcard $(LIB_SOURCE)/*.h)
@@ -340,9 +343,7 @@ cobol.mostlyclean:
cobol.clean:
rm -fr gcobol cobol1 cobol/* \
- ../*/libgcobol/* \
- $(srcdir)/cobol/charmaps-dupe.cc \
- $(srcdir)/cobol/valconv-dupe.cc
+ ../*/libgcobol/*
cobol.distclean:
diff --git a/gcc/cobol/UAT/testsuite.src/run_misc.at b/gcc/cobol/UAT/testsuite.src/run_misc.at
index 5831caaccea24df0eed5a9e210b679586e71f096..7531691cbb2e6369d287aa985bd0c9baa03a4d96 100644
--- a/gcc/cobol/UAT/testsuite.src/run_misc.at
+++ b/gcc/cobol/UAT/testsuite.src/run_misc.at
@@ -3620,6 +3620,7 @@ AT_CHECK([$COBCRUN_DIRECT ./caller], [0], [], [])
AT_CLEANUP
AT_SETUP([-static compilation])
+AT_SKIP_IF(false)
AT_KEYWORDS([compilation])
AT_DATA([prog.cob], [
IDENTIFICATION DIVISION.
diff --git a/gcc/cobol/gcobolspec.cc b/gcc/cobol/gcobolspec.cc
index 1f612ca1865a93f5eeda5efa6fcea49e73d4c15d..c06e7a8b9fc9e8c9f9900d92d753936999989d3a 100644
--- a/gcc/cobol/gcobolspec.cc
+++ b/gcc/cobol/gcobolspec.cc
@@ -571,10 +571,15 @@ lang_specific_driver (struct cl_decoded_option **in_decoded_options,
// Don't pass this one on to cobol1
break;
+#ifdef __x86_64__
case OPT_m32:
error ( "unrecognized command-line option %<-%s%>; "
"(32-bit executables cannot be generated)", "m32");
break;
+#endif
+ case OPT_static:
+ static_in_general = true;
+ break;
default:
append_arg(decoded_options[i]);
@@ -617,7 +622,7 @@ lang_specific_driver (struct cl_decoded_option **in_decoded_options,
{
add_arg_lib(DL_LIBRARY, static_in_general);
}
- if( need_libstdc )
+ if( need_libstdc && static_in_general )
{
add_arg_lib(STDCPP_LIBRARY, static_in_general);
}
diff --git a/gcc/cobol/scripts/debug-configure-build b/gcc/cobol/scripts/debug-configure-build
index a3b83953228c2f82d6622110c166240787b643df..cd79b1b6a78603f3c92fd29ffb65ae930e043d92 100755
--- a/gcc/cobol/scripts/debug-configure-build
+++ b/gcc/cobol/scripts/debug-configure-build
@@ -77,8 +77,6 @@ LIBCXXFLAGS_FOR_TARGET="-ggdb -O0" \
--with-pkgversion="$PKGVERSION" \
--enable-languages=c,c++,cobol \
--prefix=/usr/local/gcobol \
---libdir=/usr/local/gcobol/lib \
---libexecdir=/usr/local/gcobol/lib \
--with-gcc-major-version-only \
--program-suffix=-$MAJOR_VERSION \
--enable-shared \
diff --git a/libgcobol/ChangeLog b/libgcobol/ChangeLog
index aebc35e996d2c2848503ca531fa1067364715195..820bf5ffc451abca9eb81073f32c54e836a23c38 100644
--- a/libgcobol/ChangeLog
+++ b/libgcobol/ChangeLog
@@ -1,3 +1,10 @@
+2025-03-01 Robert Dubner <rdubner@symas.com>
+ * Jim added Makefile.am to libgcobol.
+ * Put explicit --tag=CXX into the libtool invocations.
+
+2025-02-27 Robert Dubner <rdubner@symas.com>
+ * libgcobol.so installes into $(prefix)/lib64
+
2025-02-25 Robert Dubner <rdubner@symas.com>
* Fixed a bad $(wildcard ...) assigment in Makefile.in by including the
missing $(srcdir) prefix.
diff --git a/libgcobol/Makefile.am b/libgcobol/Makefile.am
new file mode 100644
index 0000000000000000000000000000000000000000..d6baa419552931841ddbd1600678762241a90796
--- /dev/null
+++ b/libgcobol/Makefile.am
@@ -0,0 +1,153 @@
+# Copyright (C) 2025 Free Software Foundation, Inc.
+# Contributed by the Symas Corporation, 2025
+
+# This file is part of GCC.
+
+# GCC is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3, or (at your option)
+# any later version.
+
+# GCC is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with GCC; see the file COPYING3. If not see
+# <http://www.gnu.org/licenses/>.
+
+# Written de novo for libgcobol.
+
+AUTOMAKE_OPTIONS = 1.8 foreign
+ACLOCAL_AMFLAGS = -I .. -I ../config
+
+lib_LTLIBRARIES = libgcobol.la
+
+libgcobol.la: $(libgcobol_la_OBJECTS) \
+ $(libgcobol_la_DEPENDENCIES) \
+ $(EXTRA_libgcobol_la_DEPENDENCIES)
+ $(AM_V_GEN)$(libgcobol_la_LINK) \
+ -rpath $(libdir)/../lib64 \
+ $(libgcobol_la_OBJECTS) \
+ $(libgcobol_la_LIBADD) $(LIBS)
+
+
+##
+## 2.2.12 Automatic Dependency Tracking
+## Automake generates code for automatic dependency tracking by default
+##
+libgcobol_la_SOURCES = \
+ charmaps.cc \
+ constants.cc \
+ gfileio.cc \
+ gmath.cc \
+ intrinsic.cc \
+ io.cc \
+ libgcobol.cc \
+ valconv.cc
+
+#
+# configure varables
+#
+
+# Automatic
+AM_CFLAGS = @CFLAGS@
+configure_input = @configure_input@
+AM_CPPFLAGS = @CPPFLAGS@
+AM_CXXFLAGS = @CXXFLAGS@
+DEFS = @DEFS@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ERLCFLAGS = @ERLCFLAGS@
+FCFLAGS = @FCFLAGS@
+FFLAGS = @FFLAGS@
+AM_LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+OBJCFLAGS = @OBJCFLAGS@
+OBJCXXFLAGS = @OBJCXXFLAGS@
+GOFLAGS = @GOFLAGS@
+builddir = @builddir@
+abs_builddir = @abs_builddir@
+top_builddir = @top_builddir@
+top_build_prefix = @top_build_prefix@
+abs_top_builddir = @abs_top_builddir@
+## srcdir see: overrides
+abs_srcdir = @abs_srcdir@
+top_srcdir = @top_srcdir@
+abs_top_srcdir = @abs_top_srcdir@
+
+# Installation
+bindir = @bindir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+
+# Overrides and custom
+
+CC = @CC@
+CXX = @CXX@
+AR = @AR@
+AS = @AS@
+RANLIB = @RANLIB@
+LIBGCOBOL_VERSION = @LIBGCOBOL_VERSION@
+VERSION_SUFFIX = @VERSION_SUFFIX@
+LIBTOOL = @LIBTOOL@ $(LIBTOOLFLAGS)
+
+libgcobol_la_LFLAGS = -lstdc++
+libgcobol_la_LINK = $(LIBTOOL) --mode=link --tag=CXX $(CXX) \
+ -o libgcobol$(libsuffix).la \
+ -Wc,-shared-libgcc \
+ -version-info $(LIBGCOBOL_VERSION) \
+ -lstdc++ \
+ $(LTLDFLAGS)
+
+# The 'all' rule must be the first one so that it is executed if
+# nothing is specified on the command-line.
+all: $(LIBGCOBOL_LA)
+
+.PHONY: install install-html install-pdf install-info
+
+###include $(top_srcdir)/../multilib.am
+install: libgcobol$(libsuffix).la
+ $(LIBTOOL) --mode=install $(INSTALL) $^ $(libdir)/../lib64
+
+
+WARN_CFLAGS = -W -Wall -Wwrite-strings
+
+# not defined: DEFS, MAX_ERRORS, LTLDFLAGS
+ALL_CFLAGS = -I. -I$(srcdir) $(AM_CPPFLAGS) $(DEFS) \
+ $(XCFLAGS) $(AM_CXXFLAGS) $(WARN_CFLAGS) $(MAX_ERRORS) \
+ -DIN_GCC -DIN_TARGET_LIBS -fno-strict-aliasing
+
+%.lo: %.c
+ $(LIBTOOL) --mode=compile $(CC) -c \
+ -o $@ $(ALL_CFLAGS) $(INCLUDES) $<
+
+%.lo: %.cc
+ $(LIBTOOL) --mode=compile --tag=CXX $(CXX) -c \
+ -o $@ $(INCLUDES) $(ALL_CFLAGS) $<
+
+doc: info dvi pdf html
+
+# No install-html or install-pdf support
+install-html install-pdf install-info:
+
diff --git a/libgcobol/Makefile.in b/libgcobol/Makefile.in
index 0ba769daae2e09f450f370026c9b941722f89bf2..0330af66794e8019ef16fc43ccf0b09da8e3fa66 100644
--- a/libgcobol/Makefile.in
+++ b/libgcobol/Makefile.in
@@ -1,7 +1,21 @@
-# Makefile for the GCOBOL runtime library.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
+# @configure_input@
-# Copyright (C) 2021-2024 Free Software Foundation, Inc.
-# Modifications made by the Symas Corporation, 2022
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Copyright (C) 2025 Free Software Foundation, Inc.
+# Contributed by the Symas Corporation, 2025
# This file is part of GCC.
@@ -19,276 +33,941 @@
# along with GCC; see the file COPYING3. If not see
# <http://www.gnu.org/licenses/>.
-# This was cribbed from the libchill, libiberty, libstdc++, and
-# libobjc Makefile.in files. Some of this stuff may be unnecessary.
+# Written de novo for libgcobol.
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+target_triplet = @target@
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/../config/depstand.m4 \
+ $(top_srcdir)/../config/lead-dot.m4 \
+ $(top_srcdir)/../config/multi.m4 \
+ $(top_srcdir)/../config/override.m4 \
+ $(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
+ $(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
+ $(top_srcdir)/acinclude.m4 $(top_srcdir)/../config/acx.m4 \
+ $(top_srcdir)/../config/no-executables.m4 \
+ $(top_srcdir)/../config/enable.m4 \
+ $(top_srcdir)/../config/tls.m4 \
+ $(top_srcdir)/../config/bitfields.m4 \
+ $(top_srcdir)/../libtool.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+ $(am__configure_deps) $(am__DIST_COMMON)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+am__installdirs = "$(DESTDIR)$(libdir)"
+LTLIBRARIES = $(lib_LTLIBRARIES)
+libgcobol_la_LIBADD =
+am_libgcobol_la_OBJECTS = charmaps.lo constants.lo gfileio.lo gmath.lo \
+ intrinsic.lo io.lo libgcobol.lo valconv.lo
+libgcobol_la_OBJECTS = $(am_libgcobol_la_OBJECTS)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp = $(SHELL) $(top_srcdir)/../depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 =
+LTCXXCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) \
+ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+ $(AM_CXXFLAGS) $(CXXFLAGS)
+AM_V_CXX = $(am__v_CXX_@AM_V@)
+am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@)
+am__v_CXX_0 = @echo " CXX " $@;
+am__v_CXX_1 =
+CXXLD = $(CXX)
+CXXLINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
+ $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CXXLD = $(am__v_CXXLD_@AM_V@)
+am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@)
+am__v_CXXLD_0 = @echo " CXXLD " $@;
+am__v_CXXLD_1 =
+SOURCES = $(libgcobol_la_SOURCES)
+DIST_SOURCES = $(libgcobol_la_SOURCES)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+ $(LISP)config.h.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+CSCOPE = cscope
+AM_RECURSIVE_TARGETS = cscope
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
+ $(top_srcdir)/../compile $(top_srcdir)/../config.guess \
+ $(top_srcdir)/../config.sub $(top_srcdir)/../depcomp \
+ $(top_srcdir)/../install-sh $(top_srcdir)/../ltmain.sh \
+ $(top_srcdir)/../missing $(top_srcdir)/../mkinstalldirs \
+ AUTHORS COPYING ChangeLog INSTALL NEWS README
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+ if test -d "$(distdir)"; then \
+ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -rf "$(distdir)" \
+ || { sleep 5 && rm -rf "$(distdir)"; }; \
+ else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+DIST_TARGETS = dist-gzip
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+# Overrides and custom
+CC = @CC@
+CCAS = @CCAS@
+CCASDEPMODE = @CCASDEPMODE@
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CC_FOR_BUILD = @CC_FOR_BUILD@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBGCOBOL_VERSION = @LIBGCOBOL_VERSION@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@ $(LIBTOOLFLAGS)
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
-MAKEOVERRIDES=
-
-#### Start of system configuration section. ####
-
-srcdir = @glibcpp_srcdir@
-VPATH = @glibcpp_srcdir@
-prefix = @prefix@
+SPEC_LIBGCOBOL_DEPS = @SPEC_LIBGCOBOL_DEPS@
+STRIP = @STRIP@
+VERSION = @VERSION@
+VERSION_SUFFIX = @VERSION_SUFFIX@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+
+# Installation
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_libsubdir = @build_libsubdir@
+build_os = @build_os@
+build_subdir = @build_subdir@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+enable_shared = @enable_shared@
+enable_static = @enable_static@
exec_prefix = @exec_prefix@
-target_noncanonical = @target_noncanonical@
-gcc_version := $(shell @get_gcc_base_ver@ $(srcdir)/../gcc/BASE-VER)
+extra_darwin_ldflags_libgcobol = @extra_darwin_ldflags_libgcobol@
+get_gcc_base_ver = @get_gcc_base_ver@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_noncanonical = @host_noncanonical@
+host_os = @host_os@
host_subdir = @host_subdir@
-top_srcdir = @top_srcdir@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
multi_basedir = @multi_basedir@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+slibdir = @slibdir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_noncanonical = @target_noncanonical@
+target_os = @target_os@
+target_subdir = @target_subdir@
+target_vendor = @target_vendor@
toolexecdir = @toolexecdir@
-# Toolexecdir is used only by toolexeclibdir
+toolexeclibdir = @toolexeclibdir@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = 1.8 foreign
+ACLOCAL_AMFLAGS = -I .. -I ../config
+lib_LTLIBRARIES = libgcobol.la
+libgcobol_la_SOURCES = \
+ charmaps.cc \
+ constants.cc \
+ gfileio.cc \
+ gmath.cc \
+ intrinsic.cc \
+ io.cc \
+ libgcobol.cc \
+ valconv.cc
+
+
+#
+# configure varables
+#
+
+# Automatic
+AM_CFLAGS = @CFLAGS@
+configure_input = @configure_input@
+AM_CPPFLAGS = @CPPFLAGS@
+AM_CXXFLAGS = @CXXFLAGS@
+ERLCFLAGS = @ERLCFLAGS@
+FCFLAGS = @FCFLAGS@
+FFLAGS = @FFLAGS@
+AM_LDFLAGS = @LDFLAGS@
+OBJCFLAGS = @OBJCFLAGS@
+OBJCXXFLAGS = @OBJCXXFLAGS@
+GOFLAGS = @GOFLAGS@
+AS = @AS@
+libgcobol_la_LFLAGS = -lstdc++
+libgcobol_la_LINK = $(LIBTOOL) --mode=link --tag=CXX $(CXX) \
+ -o libgcobol$(libsuffix).la \
+ -Wc,-shared-libgcc \
+ -version-info $(LIBGCOBOL_VERSION) \
+ -lstdc++ \
+ $(LTLDFLAGS)
-#toolexeclibdir = @toolexeclibdir@
-toolexeclibdir = @libdir@
+WARN_CFLAGS = -W -Wall -Wwrite-strings
-includedirname = @includedirname@
-libsuffix = @libsuffix@
+# not defined: DEFS, MAX_ERRORS, LTLDFLAGS
+ALL_CFLAGS = -I. -I$(srcdir) $(AM_CPPFLAGS) $(DEFS) \
+ $(XCFLAGS) $(AM_CXXFLAGS) $(WARN_CFLAGS) $(MAX_ERRORS) \
+ -DIN_GCC -DIN_TARGET_LIBS -fno-strict-aliasing
-lt_host_flags = @lt_host_flags@
-extra_ldflags_libgcobol = @extra_ldflags_libgcobol@
+all: config.h
+ $(MAKE) $(AM_MAKEFLAGS) all-am
-top_builddir = .
+.SUFFIXES:
+.SUFFIXES: .cc .lo .o .obj
+am--refresh: Makefile
+ @:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ $(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+config.h: stamp-h1
+ @test -f $@ || rm -f stamp-h1
+ @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+ @rm -f stamp-h1
+ cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+ rm -f stamp-h1
+ touch $@
+
+distclean-hdr:
+ -rm -f config.h stamp-h1
+
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+ @$(NORMAL_INSTALL)
+ @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+ list2=; for p in $$list; do \
+ if test -f $$p; then \
+ list2="$$list2 $$p"; \
+ else :; fi; \
+ done; \
+ test -z "$$list2" || { \
+ echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
+ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+ }
+
+uninstall-libLTLIBRARIES:
+ @$(NORMAL_UNINSTALL)
+ @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+ done
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-install_sh = @install_sh@
-libdir = $(exec_prefix)/lib
-libsubdir = $(libdir)/gcc/$(target_noncanonical)/$(gcc_version)
-
-# Multilib support variables.
-MULTISRCTOP =
-MULTIBUILDTOP =
-MULTIDIRS =
-MULTISUBDIR =
-MULTIDO = true
-MULTICLEAN = true
-
-# Not configured per top-level version, since that doesn't get passed
-# down at configure time, but overrridden by the top-level install
-# target.
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-install_sh_PROGRAM = $(install_sh) -c
+clean-libLTLIBRARIES:
+ -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+ @list='$(lib_LTLIBRARIES)'; \
+ locs=`for p in $$list; do echo $$p; done | \
+ sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+ sort -u`; \
+ test -z "$$locs" || { \
+ echo rm -f $${locs}; \
+ rm -f $${locs}; \
+ }
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/charmaps.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/constants.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gfileio.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gmath.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/intrinsic.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/io.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgcobol.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/valconv.Plo@am__quote@
+
+.cc.o:
+@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ $<
+
+.cc.obj:
+@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.cc.lo:
+@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(LTCXXCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+distclean-libtool:
+ -rm -f libtool config.lt
+
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ set x; \
+ here=`pwd`; \
+ $(am__define_uniq_tagged_files); \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+ test ! -s cscope.files \
+ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+ -rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+ -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+
+distdir: $(DISTFILES)
+ $(am__remove_distdir)
+ test -d "$(distdir)" || mkdir "$(distdir)"
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ -test -n "$(am__skip_mode_fix)" \
+ || find "$(distdir)" -type d ! -perm -755 \
+ -exec chmod u+rwx,go+rx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+ tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
+ $(am__post_remove_distdir)
+
+dist-bzip2: distdir
+ tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+ $(am__post_remove_distdir)
+
+dist-lzip: distdir
+ tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+ $(am__post_remove_distdir)
+
+dist-xz: distdir
+ tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+ $(am__post_remove_distdir)
+
+dist-tarZ: distdir
+ @echo WARNING: "Support for distribution archives compressed with" \
+ "legacy program 'compress' is deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+ $(am__post_remove_distdir)
+
+dist-shar: distdir
+ @echo WARNING: "Support for shar distribution archives is" \
+ "deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+ shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
+ $(am__post_remove_distdir)
+
+dist-zip: distdir
+ -rm -f $(distdir).zip
+ zip -rq $(distdir).zip $(distdir)
+ $(am__post_remove_distdir)
+
+dist dist-all:
+ $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+ $(am__post_remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ case '$(DIST_ARCHIVES)' in \
+ *.tar.gz*) \
+ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
+ *.tar.bz2*) \
+ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.lz*) \
+ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+ *.tar.xz*) \
+ xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+ *.tar.Z*) \
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+ *.shar.gz*) \
+ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
+ *.zip*) \
+ unzip $(distdir).zip ;;\
+ esac
+ chmod -R a-w $(distdir)
+ chmod u+w $(distdir)
+ mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
+ chmod a-w $(distdir)
+ test -d $(distdir)/_build || exit 0; \
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && am__cwd=`pwd` \
+ && $(am__cd) $(distdir)/_build/sub \
+ && ../../configure \
+ $(AM_DISTCHECK_CONFIGURE_FLAGS) \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ --srcdir=../.. --prefix="$$dc_install_base" \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+ distuninstallcheck \
+ && chmod -R a-w "$$dc_install_base" \
+ && ({ \
+ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \
+ && rm -rf "$$dc_destdir" \
+ && $(MAKE) $(AM_MAKEFLAGS) dist \
+ && rm -rf $(DIST_ARCHIVES) \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+ && cd "$$am__cwd" \
+ || exit 1
+ $(am__post_remove_distdir)
+ @(echo "$(distdir) archives ready for distribution: "; \
+ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+ @test -n '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: trying to run $@ with an empty' \
+ '$$(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ $(am__cd) '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ if test -n "$(DESTDIR)"; then \
+ echo " (check DESTDIR support)"; \
+ fi ; \
+ $(distuninstallcheck_listfiles) ; \
+ exit 1; } >&2
+distcleancheck: distclean
+ @if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES) config.h
+installdirs:
+ for dir in "$(DESTDIR)$(libdir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
-AR = @AR@
-AR_FLAGS = rc
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-RANLIB = @RANLIB@
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
-ifeq ("$(USER)","bob")
- MAX_ERRORS := -fmax-errors=1
-endif
+clean-generic:
-CC = @CC@
-CFLAGS = @CFLAGS@
-XCFLAGS = @XCFLAGS@
-WARN_CFLAGS = -W -Wall -Wwrite-strings # -Wstrict-prototypes
-ALL_CFLAGS = -I. -I$(srcdir) $(CPPFLAGS) $(DEFS) \
- $(XCFLAGS) $(CFLAGS) $(WARN_CFLAGS) $(MAX_ERRORS)\
- -DIN_GCC -DIN_TARGET_LIBS -fno-strict-aliasing -fexceptions
-
-
-# Libtool
-# The following strings describe the version of the COBOL library
-# begin compiled and compatibility issues.
-# Please refer to Libtool documentation about how to manage these
-# numbers.
-LIBGCOBOL_VERSION = @VERSION@
-LIBTOOL = @LIBTOOL@ $(LIBTOOLFLAGS)
-LIBTOOL_COMPILE = $(LIBTOOL) --mode=compile
-LIBTOOL_LINK = $(LIBTOOL) --mode=link
-LIBTOOL_INSTALL = $(LIBTOOL) --mode=install
-LIBTOOL_CLEAN = $(LIBTOOL) --mode=clean
-#LIBTOOL_UNINSTALL = $(LIBTOOL) --mode=uninstall
-
-GCOBOL_HFILES=$(wildcard $(srcdir)/*.h)
-
-VERSION_SUFFIX = $(shell echo $(LIBGCOBOL_VERSION) | tr ':' '.' )
-
-INCLUDES = \
- $(END)
-
-##
-## The list of header/source files
-##
-
-# User-visible header files, from the gcobol/ directory
-GCOBOL_H = \
- $(END)
-
-# C source files to compile
-C_SOURCE_FILES = \
- charmaps.cc \
- constants.cc \
- gfileio.cc \
- gmath.cc \
- intrinsic.cc \
- io.cc \
- libgcobol.cc \
- valconv.cc \
- $(END)
-
-# Object files to link (when the library is linked with no GC (Garbage
-# Collection))
-OBJS = \
- $(patsubst %.c,%.lo,$(C_SOURCE_FILES)) \
- $(patsubst %.cc,%.lo,$(C_SOURCE_FILES))
-
-
-##
-## The rules to build
-##
-
-# Flags to pass to a recursive make.
-FLAGS_TO_PASS = \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "CXX=$(CXX)" \
- "CFLAGS=$(CFLAGS)" \
- "DESTDIR=$(DESTDIR)" \
- "LIBCFLAGS=$(LIBCFLAGS)" \
- "EXTRA_OFILES=$(EXTRA_OFILES)" \
- "HDEFINES=$(HDEFINES)" \
- "INSTALL=$(INSTALL)" \
- "INSTALL_DATA=$(INSTALL_DATA)" \
- "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
- "LDFLAGS=$(LDFLAGS)" \
- "LIBTOOL=$(LIBTOOL)" \
- "LOADLIBES=$(LOADLIBES)" \
- "PICFLAG=$(PICFLAG)" \
- "RANLIB=$(RANLIB)" \
- "SHELL=$(SHELL)" \
- "prefix=$(prefix)" \
- "exec_prefix=$(exec_prefix)" \
- "libdir=$(libdir)" \
- "libsubdir=$(libsubdir)" \
- "tooldir=$(tooldir)"
-
-ifeq "$(MULTISUBDIR)" "/32"
-# suppress 32-bit builds until such time as the host and target executables
-# no longer require __int128 variables
-$(info Suppressing the 32-bit build because of lack of support for __int128 variables)
-BUILDIT =
-else
-BUILDIT = libgcobol$(libsuffix).la
-endif
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-# The 'all' rule must be the first one so that it is executed if
-# nothing is specified on the command-line.
-all: $(BUILDIT)
- : $(MAKE) ; exec $(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=all
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
-.SUFFIXES:
-.SUFFIXES: .c .lo .cc
+clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
+ mostlyclean-am
-%.lo: %.c
- $(LIBTOOL_COMPILE) $(CC) -c -o $@ \
- $(ALL_CFLAGS) $(INCLUDES) $<
+distclean: distclean-am
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-hdr distclean-libtool distclean-tags
-%.lo: %.cc
- $(LIBTOOL_COMPILE) $(CXX) -c -o $@ \
- $(INCLUDES) $(ALL_CFLAGS) $<
+dvi: dvi-am
-charmaps.lo : $(GCOBOL_HFILES)
-constants.lo : $(GCOBOL_HFILES)
-gfileio.lo : $(GCOBOL_HFILES)
-gmath.lo : $(GCOBOL_HFILES)
-intrinsic.lo : $(GCOBOL_HFILES)
-io.lo : $(GCOBOL_HFILES)
-libgcobol.lo : $(GCOBOL_HFILES)
-valconv.lo : $(GCOBOL_HFILES)
+dvi-am:
-# These files have separate rules because they require special
-# compiler flags.
+html: html-am
-doc: info dvi pdf html
+html-am:
-# No install-html or install-pdf support
-.PHONY: install-html install-pdf install-info
-install-html:
-install-pdf:
-install-info:
+info: info-am
-LTLDFLAGS = $(shell $(SHELL) $(top_srcdir)/../libtool-ldflags $(LDFLAGS))
+info-am:
-libgcobol$(libsuffix).la: $(OBJS)
- $(LIBTOOL_LINK) $(CXX) -o $@ $(OBJS) \
- -Wc,-shared-libgcc -rpath $(toolexeclibdir) \
- -version-info $(LIBGCOBOL_VERSION) $(extra_ldflags_libgcobol) \
- $(LTLDFLAGS)
+install-data-am:
-info:
-dvi:
-pdf:
-html:
+install-dvi: install-dvi-am
-Makefile: Makefile.in config.status
- $(SHELL) config.status
+install-dvi-am:
-config.status: configure
- rm -f config.cache
- CONFIG_SITE=no-such-file CC='$(CC)' AR='$(AR)' CFLAGS='$(CFLAGS)' \
- CPPFLAGS='$(CPPFLAGS)' $(SHELL) config.status --recheck
+install-exec-am: install-libLTLIBRARIES
-AUTOCONF = autoconf
+install-html: install-html-am
-install: install-libs install-headers
+install-html-am:
-install-libs: installdirs
- $(SHELL) $(multi_basedir)/mkinstalldirs $(DESTDIR)$(toolexeclibdir)
- $(LIBTOOL_INSTALL) $(INSTALL) libgcobol$(libsuffix).la $(DESTDIR)$(toolexeclibdir);
- $(MULTIDO) $(FLAGS_TO_PASS) multi-do DO="$@"
- @-$(LIBTOOL) --mode=finish $(DESTDIR)$(toolexeclibdir)
+install-info: install-info-am
-# Copy Objective-C headers to installation include directory.
-install-headers:
- $(SHELL) $(multi_basedir)/mkinstalldirs $(DESTDIR)$(libsubdir)/$(includedirname)/gcobol
- for file in $(GCOBOL_H); do \
- realfile=$(srcdir)/objc/$${file}; \
- $(INSTALL_DATA) $${realfile} $(DESTDIR)$(libsubdir)/$(includedirname)/gcobol; \
- done
+install-info-am:
-check uninstall install-strip dist installcheck installdirs:
+install-man:
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-# This is a little ham-handed, but after struggling for a while to
-# do it "correctly", I lost interest
- strip -s $(DESTDIR)$(toolexeclibdir)/libgcobol.so.$(VERSION_SUFFIX)
+install-pdf: install-pdf-am
-mostlyclean:
- -$(LIBTOOL_CLEAN) rm -f libgcobol$(libsuffix).la *.lo
- -rm -f runtime-info.h tmp-runtime.s *.o *.lo libgcobol* xforward \
- fflags *.aux *.cp *.dvi *.pdf *.fn *.info *.ky *.log *.pg \
- *.toc *.tp *.vr *.html libobj.exp
- @$(MULTICLEAN) multi-clean DO=mostlyclean
+install-pdf-am:
-clean: mostlyclean
- rm -f config.log
- @$(MULTICLEAN) multi-clean DO=clean
+install-ps: install-ps-am
-distclean: clean
- @$(MULTICLEAN) multi-clean DO=distclean
- rm -f config.cache config.status Makefile configure
+install-ps-am:
-maintainer-clean realclean: distclean
+installcheck-am:
-.PHONY: mostlyclean clean distclean maintainer-clean all check uninstall \
- install-strip dist installcheck installdirs
+maintainer-clean: maintainer-clean-am
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-libLTLIBRARIES
+
+.MAKE: all install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-am clean \
+ clean-cscope clean-generic clean-libLTLIBRARIES clean-libtool \
+ cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
+ dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \
+ distcheck distclean distclean-compile distclean-generic \
+ distclean-hdr distclean-libtool distclean-tags distcleancheck \
+ distdir distuninstallcheck dvi dvi-am html html-am info \
+ info-am install install-am install-data install-data-am \
+ install-dvi install-dvi-am install-exec install-exec-am \
+ install-html install-html-am install-info install-info-am \
+ install-libLTLIBRARIES install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags tags-am uninstall uninstall-am uninstall-libLTLIBRARIES
+
+.PRECIOUS: Makefile
+
+
+libgcobol.la: $(libgcobol_la_OBJECTS) \
+ $(libgcobol_la_DEPENDENCIES) \
+ $(EXTRA_libgcobol_la_DEPENDENCIES)
+ $(AM_V_GEN)$(libgcobol_la_LINK) \
+ -rpath $(libdir)/../lib64 \
+ $(libgcobol_la_OBJECTS) \
+ $(libgcobol_la_LIBADD) $(LIBS)
+
+# The 'all' rule must be the first one so that it is executed if
+# nothing is specified on the command-line.
+all: $(LIBGCOBOL_LA)
+
+.PHONY: install install-html install-pdf install-info
+
+###include $(top_srcdir)/../multilib.am
+install: libgcobol$(libsuffix).la
+ $(LIBTOOL) --mode=install $(INSTALL) $^ $(libdir)/../lib64
+
+%.lo: %.c
+ $(LIBTOOL) --mode=compile $(CC) -c \
+ -o $@ $(ALL_CFLAGS) $(INCLUDES) $<
+
+%.lo: %.cc
+ $(LIBTOOL) --mode=compile --tag=CXX $(CXX) -c \
+ -o $@ $(INCLUDES) $(ALL_CFLAGS) $<
+
+doc: info dvi pdf html
+
+# No install-html or install-pdf support
+install-html install-pdf install-info:
-# Don't export variables to the environment, in order not to confuse
-# configure.
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
diff --git a/libgcobol/aclocal.m4 b/libgcobol/aclocal.m4
index 9ac0f645b52b8341effc86b3cd0e57e5aa7a2ae6..db3eccb1944f7625d4dca4d6827f6f8bdd49262b 100644
--- a/libgcobol/aclocal.m4
+++ b/libgcobol/aclocal.m4
@@ -12,6 +12,122 @@
# PARTICULAR PURPOSE.
m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
+You have another version of autoconf. It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
+
+# Copyright (C) 2002-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.15'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.15.1], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.15.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# Figure out how to run the assembler. -*- Autoconf -*-
+
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_AS
+# ----------
+AC_DEFUN([AM_PROG_AS],
+[# By default we simply use the C compiler to build assembly code.
+AC_REQUIRE([AC_PROG_CC])
+test "${CCAS+set}" = set || CCAS=$CC
+test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS
+AC_ARG_VAR([CCAS], [assembler compiler command (defaults to CC)])
+AC_ARG_VAR([CCASFLAGS], [assembler compiler flags (defaults to CFLAGS)])
+_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES([CCAS])])dnl
+])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is '.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+])
+
# AM_CONDITIONAL -*- Autoconf -*-
# Copyright (C) 1997-2017 Free Software Foundation, Inc.
@@ -45,6 +161,491 @@ AC_CONFIG_COMMANDS_PRE(
Usually this means the macro was only invoked conditionally.]])
fi])])
+# Copyright (C) 1999-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+m4_if([$1], [CC], [depcc="$CC" am_compiler_list=],
+ [$1], [CXX], [depcc="$CXX" am_compiler_list=],
+ [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
+ [$1], [UPC], [depcc="$UPC" am_compiler_list=],
+ [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ am__universal=false
+ m4_case([$1], [CC],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac],
+ [CXX],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac])
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE([dependency-tracking], [dnl
+AS_HELP_STRING(
+ [--enable-dependency-tracking],
+ [do not reject slow dependency extractors])
+AS_HELP_STRING(
+ [--disable-dependency-tracking],
+ [speeds up one-time build])])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+ am__nodep='_no'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([am__nodep])dnl
+_AM_SUBST_NOTMAKE([am__nodep])dnl
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright (C) 1999-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+ # Older Autoconf quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named 'Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running 'make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "$am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each '.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define([AC_PROG_CC],
+m4_defn([AC_PROG_CC])
+[_AM_PROG_CC_C_O
+])
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.65])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[AC_DIAGNOSE([obsolete],
+ [$0: two- and three-arguments forms are deprecated.])
+m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(
+ m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
+ [ok:ok],,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
+ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
+AM_MISSING_PROG([AUTOCONF], [autoconf])
+AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
+AM_MISSING_PROG([AUTOHEADER], [autoheader])
+AM_MISSING_PROG([MAKEINFO], [makeinfo])
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
+# We need awk for the "check" target (and possibly the TAP driver). The
+# system "awk" is bad on some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES([CC])],
+ [m4_define([AC_PROG_CC],
+ m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES([CXX])],
+ [m4_define([AC_PROG_CXX],
+ m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES([OBJC])],
+ [m4_define([AC_PROG_OBJC],
+ m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+ [_AM_DEPENDENCIES([OBJCXX])],
+ [m4_define([AC_PROG_OBJCXX],
+ m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
+])
+AC_REQUIRE([AM_SILENT_RULES])dnl
+dnl The testsuite driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This
+dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
+ fi
+fi
+dnl The trailing newline in this macro's definition is deliberate, for
+dnl backward compatibility and to allow trailing 'dnl'-style comments
+dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
+])
+
+dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+AC_SUBST([install_sh])])
+
# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
# From Jim Meyering
@@ -81,6 +682,126 @@ AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
]
)
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+# Copyright (C) 1997-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it is modern enough.
+# If it is, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
+else
+ am_missing_run=
+ AC_MSG_WARN(['missing' script is too old or missing])
+fi
+])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# --------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
# Copyright (C) 1999-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
@@ -128,6 +849,194 @@ AC_LANG_POP([C])])
# For backward compatibility.
AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_RUN_LOG(COMMAND)
+# -------------------
+# Run COMMAND, save the exit status in ac_status, and log it.
+# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
+AC_DEFUN([AM_RUN_LOG],
+[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
+ ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ (exit $ac_status); }])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[[\\\"\#\$\&\'\`$am_lf]]*)
+ AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
+ AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+ alias in your environment])
+ fi
+ if test "$[2]" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT([yes])
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
+fi
+AC_CONFIG_COMMANDS_PRE(
+ [AC_MSG_CHECKING([that generated files are newer than configure])
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ AC_MSG_RESULT([done])])
+rm -f conftest.file
+])
+
+# Copyright (C) 2009-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SILENT_RULES([DEFAULT])
+# --------------------------
+# Enable less verbose build rules; with the default set to DEFAULT
+# ("yes" being less verbose, "no" or empty being verbose).
+AC_DEFUN([AM_SILENT_RULES],
+[AC_ARG_ENABLE([silent-rules], [dnl
+AS_HELP_STRING(
+ [--enable-silent-rules],
+ [less verbose build output (undo: "make V=1")])
+AS_HELP_STRING(
+ [--disable-silent-rules],
+ [verbose build output (undo: "make V=0")])dnl
+])
+case $enable_silent_rules in @%:@ (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
+esac
+dnl
+dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
+dnl do not support nested variable expansions.
+dnl See automake bug#9928 and bug#10237.
+am_make=${MAKE-make}
+AC_CACHE_CHECK([whether $am_make supports nested variables],
+ [am_cv_make_support_nested_variables],
+ [if AS_ECHO([['TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi])
+if test $am_cv_make_support_nested_variables = yes; then
+ dnl Using '$V' instead of '$(V)' breaks IRIX make.
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AC_SUBST([AM_V])dnl
+AM_SUBST_NOTMAKE([AM_V])dnl
+AC_SUBST([AM_DEFAULT_V])dnl
+AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
+AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
+AM_BACKSLASH='\'
+AC_SUBST([AM_BACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+])
+
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor 'install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in "make install-strip", and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
# Copyright (C) 2006-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
@@ -145,13 +1054,145 @@ AC_DEFUN([_AM_SUBST_NOTMAKE])
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of 'v7', 'ustar', or 'pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+#
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AC_SUBST([AMTAR], ['$${TAR-tar}'])
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+
+m4_if([$1], [v7],
+ [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
+
+ [m4_case([$1],
+ [ustar],
+ [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+ # There is notably a 21 bits limit for the UID and the GID. In fact,
+ # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+ # and bug#13588).
+ am_max_uid=2097151 # 2^21 - 1
+ am_max_gid=$am_max_uid
+ # The $UID and $GID variables are not portable, so we need to resort
+ # to the POSIX-mandated id(1) utility. Errors in the 'id' calls
+ # below are definitely unexpected, so allow the users to see them
+ # (that is, avoid stderr redirection).
+ am_uid=`id -u || echo unknown`
+ am_gid=`id -g || echo unknown`
+ AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+ if test $am_uid -le $am_max_uid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi
+ AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+ if test $am_gid -le $am_max_gid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi],
+
+ [pax],
+ [],
+
+ [m4_fatal([Unknown tar format])])
+
+ AC_MSG_CHECKING([how to create a $1 tar archive])
+
+ # Go ahead even if we have the value already cached. We do so because we
+ # need to set the values for the 'am__tar' and 'am__untar' variables.
+ _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+ for _am_tool in $_am_tools; do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar; do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works.
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ AM_RUN_LOG([cat conftest.dir/file])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+ done
+ rm -rf conftest.dir
+
+ AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+ AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([../config/depstand.m4])
+m4_include([../config/lead-dot.m4])
+m4_include([../config/multi.m4])
+m4_include([../config/override.m4])
m4_include([../ltoptions.m4])
m4_include([../ltsugar.m4])
m4_include([../ltversion.m4])
m4_include([../lt~obsolete.m4])
-m4_include([../config/cet.m4])
-m4_include([../config/lthostflags.m4])
-m4_include([../config/multi.m4])
-m4_include([../config/override.m4])
-m4_include([../config/toolexeclibdir.m4])
m4_include([acinclude.m4])
diff --git a/libgcobol/config.h.in b/libgcobol/config.h.in
index 01963475a21c7873e9b7c4def99599cfa58333f6..c9095ff89063e78b5b146e0b8e0fb6ac6a04561d 100644
--- a/libgcobol/config.h.in
+++ b/libgcobol/config.h.in
@@ -1,8 +1,5 @@
/* config.h.in. Generated from configure.ac by autoheader. */
-/* Define if the type of bitfields effects alignment. */
-#undef HAVE_BITFIELD_TYPE_MATTERS
-
/* Define to 1 if the target assembler supports thread-local storage. */
#undef HAVE_CC_TLS
@@ -12,12 +9,12 @@
/* Define to 1 if you have the <inttypes.h> header file. */
#undef HAVE_INTTYPES_H
+/* Define to 1 if you have the <malloc.h> header file. */
+#undef HAVE_MALLOC_H
+
/* Define to 1 if you have the <memory.h> header file. */
#undef HAVE_MEMORY_H
-/* Define to 1 if you have the <sched.h> header file. */
-#undef HAVE_SCHED_H
-
/* Define to 1 if you have the <stdint.h> header file. */
#undef HAVE_STDINT_H
@@ -36,9 +33,6 @@
/* Define to 1 if you have the <sys/types.h> header file. */
#undef HAVE_SYS_TYPES_H
-/* Define to 1 if the target supports thread-local storage. */
-#undef HAVE_TLS
-
/* Define to 1 if you have the <unistd.h> header file. */
#undef HAVE_UNISTD_H
@@ -46,6 +40,9 @@
*/
#undef LT_OBJDIR
+/* Name of package */
+#undef PACKAGE
+
/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT
@@ -66,3 +63,38 @@
/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS
+
+/* Enable extensions on AIX 3, Interix. */
+#ifndef _ALL_SOURCE
+# undef _ALL_SOURCE
+#endif
+/* Enable GNU extensions on systems that have them. */
+#ifndef _GNU_SOURCE
+# undef _GNU_SOURCE
+#endif
+/* Enable threading extensions on Solaris. */
+#ifndef _POSIX_PTHREAD_SEMANTICS
+# undef _POSIX_PTHREAD_SEMANTICS
+#endif
+/* Enable extensions on HP NonStop. */
+#ifndef _TANDEM_SOURCE
+# undef _TANDEM_SOURCE
+#endif
+/* Enable general extensions on Solaris. */
+#ifndef __EXTENSIONS__
+# undef __EXTENSIONS__
+#endif
+
+
+/* Version number of package */
+#undef VERSION
+
+/* Define to 1 if on MINIX. */
+#undef _MINIX
+
+/* Define to 2 if the system does not provide POSIX.1 features except with
+ this defined. */
+#undef _POSIX_1_SOURCE
+
+/* Define to 1 if you need to in order for `stat' and other things to work. */
+#undef _POSIX_SOURCE
diff --git a/libgcobol/configure b/libgcobol/configure
index 8a7d1485c4d55055f54051d45eb374a92710397e..6f8073be1ebde8fca759cb345a26af311cfdd52e 100755
--- a/libgcobol/configure
+++ b/libgcobol/configure
@@ -196,6 +196,7 @@ test -x / || exit 1"
as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1
test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
@@ -203,8 +204,7 @@ test -x / || exit 1"
ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
PATH=/empty FPATH=/empty; export PATH FPATH
test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
- || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
-test \$(( 1 + 1 )) = 2 || exit 1"
+ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1"
if (eval "$as_required") 2>/dev/null; then :
as_have_required=yes
else
@@ -592,6 +592,7 @@ PACKAGE_STRING='package-unused version-unused'
PACKAGE_BUGREPORT=''
PACKAGE_URL=''
+ac_unique_file="Makefile.am"
# Factoring default headers for most tests.
ac_includes_default="\
#include <stdio.h>
@@ -628,57 +629,100 @@ ac_includes_default="\
# include <unistd.h>
#endif"
-ac_subst_vars='LTLIBOBJS
+ac_unique_file="Makefile.am"
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
LIBOBJS
+extra_darwin_ldflags_libgcobol
get_gcc_base_ver
-BUILD_LIBGCOBOL_FALSE
-BUILD_LIBGCOBOL_TRUE
-SET_MAKE
-CPP
+VERSION_SUFFIX
+LIBGCOBOL_VERSION
+SPEC_LIBGCOBOL_DEPS
+CC_FOR_BUILD
+enable_static
+enable_shared
+ENABLE_DARWIN_AT_RPATH_FALSE
+ENABLE_DARWIN_AT_RPATH_TRUE
+CXXCPP
OTOOL64
OTOOL
LIPO
NMEDIT
DSYMUTIL
-AWK
-STRIP
+OBJDUMP
LN_S
-NM
ac_ct_DUMPBIN
DUMPBIN
LD
FGREP
-EGREP
-GREP
SED
LIBTOOL
-OBJDUMP
-DLLTOOL
-MAINT
-MAINTAINER_MODE_FALSE
-MAINTAINER_MODE_TRUE
-INSTALL_DATA
-INSTALL_SCRIPT
-INSTALL_PROGRAM
RANLIB
+NM
AR
-AS
-XCFLAGS
-extra_ldflags_libgcobol
-lt_host_flags
-OBJEXT
-EXEEXT
-ac_ct_CC
-CPPFLAGS
-LDFLAGS
-CFLAGS
-CC
-libsuffix
-includedirname
+am__fastdepCCAS_FALSE
+am__fastdepCCAS_TRUE
+CCASDEPMODE
+CCASFLAGS
+CCAS
+am__fastdepCXX_FALSE
+am__fastdepCXX_TRUE
+CXXDEPMODE
+ac_ct_CXX
+CXXFLAGS
+CXX
+MAINTAINER_MODE_FALSE
+MAINTAINER_MODE_TRUE
toolexeclibdir
toolexecdir
-glibcpp_srcdir
+MAINT
+slibdir
+BUILD_LIBGCOBOL_FALSE
+BUILD_LIBGCOBOL_TRUE
+target_subdir
+host_subdir
+build_subdir
+build_libsubdir
target_noncanonical
+host_noncanonical
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+am__nodep
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
target_os
target_vendor
target_cpu
@@ -687,16 +731,21 @@ host_os
host_vendor
host_cpu
host
-multi_basedir
-VERSION
-target_subdir
-host_subdir
-build_subdir
-build_libsubdir
build_os
build_vendor
build_cpu
build
+EGREP
+GREP
+CPP
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+multi_basedir
target_alias
host_alias
build_alias
@@ -738,13 +787,13 @@ SHELL'
ac_subst_files=''
ac_user_opts='
enable_option_checking
-with_build_libsubdir
-with_target_subdir
+enable_multilib
+enable_dependency_tracking
+enable_silent_rules
with_cross_host
+with_build_libsubdir
enable_version_specific_runtime_libs
-enable_multilib
-with_toolexeclibdir
-enable_cet
+with_slibdir
enable_maintainer_mode
enable_shared
enable_static
@@ -753,14 +802,18 @@ enable_fast_install
with_gnu_ld
enable_libtool_lock
enable_darwin_at_rpath
-enable_tls
with_gcc_major_version_only
'
ac_precious_vars='build_alias
host_alias
target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
CPP
-CPPFLAGS'
+CXXCPP'
# Initialize some variables set by options.
@@ -1358,6 +1411,11 @@ _ACEOF
cat <<\_ACEOF
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+
System types:
--build=BUILD configure for building on BUILD [guessed]
--host=HOST cross-compile to build programs to run on HOST [BUILD]
@@ -1375,9 +1433,17 @@ Optional Features:
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --enable-version-specific-runtime-libs Specify that runtime libraries should be installed in a compiler-specific directory
--enable-multilib build many library versions (default)
- --enable-cet enable Intel CET in target libraries [default=auto]
+ --enable-dependency-tracking
+ do not reject slow dependency extractors
+ --disable-dependency-tracking
+ speeds up one-time build
+ --enable-silent-rules less verbose build output (undo: "make V=1")
+ --disable-silent-rules verbose build output (undo: "make V=0")
+ --enable-version-specific-runtime-libs Specify that runtime libraries should be installed in a compiler-specific directory
+ --enable-maintainer-mode
+ enable make rules and dependencies not useful (and
+ sometimes confusing) to the casual installer
--enable-maintainer-mode
enable make rules and dependencies not useful (and
sometimes confusing) to the casual installer
@@ -1389,18 +1455,13 @@ Optional Features:
--enable-darwin-at-rpath
install libraries with @rpath/library-name, requires
rpaths to be added to executables
- --enable-tls Use thread-local storage [default=yes]
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-cross-host=HOST Configuring with a cross compiler
--with-build-libsubdir=DIR Directory where to find libraries for build system
- --with-target-subdir=SUBDIR
- configuring in a subdirectory
- --with-cross-host=HOST configuring with a cross compiler
- --with-toolexeclibdir=DIR
- install libraries built with a cross compiler within
- DIR
+ --with-slibdir=DIR shared libraries in DIR LIBDIR
--with-pic try to use only PIC/non-PIC objects [default=use
both]
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
@@ -1416,6 +1477,11 @@ Some influential environment variables:
CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
you have headers in a nonstandard directory <include dir>
CPP C preprocessor
+ CXX C++ compiler command
+ CXXFLAGS C++ compiler flags
+ CCAS assembler compiler command (defaults to CC)
+ CCASFLAGS assembler compiler flags (defaults to CFLAGS)
+ CXXCPP C++ preprocessor
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
@@ -1535,21 +1601,20 @@ fi
} # ac_fn_c_try_compile
-# ac_fn_c_try_link LINENO
-# -----------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_link ()
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- rm -f conftest.$ac_objext conftest$ac_exeext
- if { { ac_try="$ac_link"
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>conftest.err
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
ac_status=$?
if test -s conftest.err; then
grep -v '^ *+' conftest.err >conftest.er1
@@ -1557,97 +1622,108 @@ $as_echo "$ac_try_echo"; } >&5
mv -f conftest.er1 conftest.err
fi
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && {
- test -z "$ac_c_werror_flag" ||
+ test $ac_status = 0; } > conftest.i && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- test -x conftest$ac_exeext
}; then :
ac_retval=0
else
$as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_retval=1
+ ac_retval=1
fi
- # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
- # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
- # interfere with the next link command; also delete a directory that is
- # left behind by Apple's compiler. We do this before executing the actions.
- rm -rf conftest.dSYM conftest_ipa8_conftest.oo
eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
as_fn_set_status $ac_retval
-} # ac_fn_c_try_link
+} # ac_fn_c_try_cpp
-# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
# -------------------------------------------------------
-# Tests whether HEADER exists and can be compiled using the include files in
-# INCLUDES, setting the cache variable VAR accordingly.
-ac_fn_c_check_header_compile ()
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_c_check_header_mongrel ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if eval \${$3+:} false; then :
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
if eval \${$3+:} false; then :
$as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
$4
#include <$2>
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
- eval "$3=yes"
+ ac_header_compiler=yes
else
- eval "$3=no"
+ ac_header_compiler=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
-} # ac_fn_c_check_header_compile
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ ac_header_preproc=yes
+else
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
-# ac_fn_c_try_cpp LINENO
-# ----------------------
-# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_cpp ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if { { ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
+ yes:no: )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+ ;;
+ no:yes:* )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+ ;;
esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } > conftest.i && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then :
- ac_retval=0
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
+ eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
fi
eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-} # ac_fn_c_try_cpp
+} # ac_fn_c_check_header_mongrel
# ac_fn_c_try_run LINENO
# ----------------------
@@ -1691,10 +1767,11 @@ fi
} # ac_fn_c_try_run
-# ac_fn_c_check_func LINENO FUNC VAR
-# ----------------------------------
-# Tests whether FUNC exists, setting the cache variable VAR accordingly
-ac_fn_c_check_func ()
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
@@ -1702,29 +1779,143 @@ $as_echo_n "checking for $2... " >&6; }
if eval \${$3+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test x$gcc_no_link = xyes; then
- as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
-fi
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $2 innocuous_$2
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $2 (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-#undef $2
+} # ac_fn_c_check_header_compile
-/* Override any GCC internal prototype to avoid an error.
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ test -x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_cxx_try_compile LINENO
+# ----------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_compile
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test x$gcc_no_link = xyes; then
+ as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
+fi
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $2 (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
@@ -1761,92 +1952,88 @@ $as_echo "$ac_res" >&6; }
} # ac_fn_c_check_func
-# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
-# -------------------------------------------------------
-# Tests whether HEADER exists, giving a warning if it cannot be compiled using
-# the include files in INCLUDES and setting the cache variable VAR
-# accordingly.
-ac_fn_c_check_header_mongrel ()
+# ac_fn_cxx_try_cpp LINENO
+# ------------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_cpp ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if eval \${$3+:} false; then :
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
- # Is the header compilable?
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
-$as_echo_n "checking $2 usability... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-#include <$2>
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_header_compiler=yes
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } > conftest.i && {
+ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+ ac_retval=0
else
- ac_header_compiler=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
-# Is the header present?
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
-$as_echo_n "checking $2 presence... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <$2>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
- ac_header_preproc=yes
-else
- ac_header_preproc=no
+ ac_retval=1
fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
- yes:no: )
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
- ;;
- no:yes:* )
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
- ;;
+} # ac_fn_cxx_try_cpp
+
+# ac_fn_cxx_try_link LINENO
+# -------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
esac
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ test -x conftest$ac_exeext
+ }; then :
+ ac_retval=0
else
- eval "$3=\$ac_header_compiler"
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
-} # ac_fn_c_check_header_mongrel
+} # ac_fn_cxx_try_link
cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
@@ -2202,172 +2389,10 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
-ac_aux_dir=
-for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
- if test -f "$ac_dir/install-sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f "$ac_dir/install.sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f "$ac_dir/shtool"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-
-
-# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
- as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
-$as_echo_n "checking build system type... " >&6; }
-if ${ac_cv_build+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
- ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
- as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
-$as_echo "$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
-esac
-build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
- case ${build_alias} in
- "") build_noncanonical=${build} ;;
- *) build_noncanonical=${build_alias} ;;
-esac
-
- case ${host_alias} in
- "") host_noncanonical=${build_noncanonical} ;;
- *) host_noncanonical=${host_alias} ;;
-esac
-
- case ${target_alias} in
- "") target_noncanonical=${host_noncanonical} ;;
- *) target_noncanonical=${target_alias} ;;
-esac
-
-
-# post-stage1 host modules use a different CC_FOR_BUILD so, in order to
-# have matching libraries, they should use host libraries: Makefile.tpl
-# arranges to pass --with-build-libsubdir=$(HOST_SUBDIR).
-# However, they still use the build modules, because the corresponding
-# host modules (e.g. bison) are only built for the host when bootstrap
-# finishes. So:
-# - build_subdir is where we find build modules, and never changes.
-# - build_libsubdir is where we find build libraries, and can be overridden.
-
-# Prefix 'build-' so this never conflicts with target_subdir.
-build_subdir="build-${build_noncanonical}"
-
-# Check whether --with-build-libsubdir was given.
-if test "${with_build_libsubdir+set}" = set; then :
- withval=$with_build_libsubdir; build_libsubdir="$withval"
-else
- build_libsubdir="$build_subdir"
-fi
-
-# --srcdir=. covers the toplevel, while "test -d" covers the subdirectories
-if ( test $srcdir = . && test -d gcc ) \
- || test -d $srcdir/../host-${host_noncanonical}; then
- host_subdir="host-${host_noncanonical}"
-else
- host_subdir=.
-fi
-# No prefix.
-target_subdir=${target_noncanonical}
-
-
-# We need the following definitions because AC_PROG_LIBTOOL relies on them
-PACKAGE=libgcobol
-# Version is pulled out to make it a bit easier to change using sed.
-VERSION=4:0:0
-
-
-# This works around the fact that libtool configuration may change LD
-# for this particular configuration, but some shells, instead of
-# keeping the changes in LD private, export them just because LD is
-# exported.
-ORIGINAL_LD_FOR_MULTILIBS=$LD
-
-. ${srcdir}/configure.tgt
-
-# -------
-# Options
-# -------
-
-# We use these options to decide which functions to include.
-
-# Check whether --with-target-subdir was given.
-if test "${with_target_subdir+set}" = set; then :
- withval=$with_target_subdir;
-fi
-
-
-# Check whether --with-cross-host was given.
-if test "${with_cross_host+set}" = set; then :
- withval=$with_cross_host;
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for --enable-version-specific-runtime-libs" >&5
-$as_echo_n "checking for --enable-version-specific-runtime-libs... " >&6; }
-# Check whether --enable-version-specific-runtime-libs was given.
-if test "${enable_version_specific_runtime_libs+set}" = set; then :
- enableval=$enable_version_specific_runtime_libs; case "$enableval" in
- yes) version_specific_libs=yes ;;
- no) version_specific_libs=no ;;
- *) as_fn_error $? "Unknown argument to enable/disable version-specific libs" "$LINENO" 5;;
- esac
-else
- version_specific_libs=no
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $version_specific_libs" >&5
-$as_echo "$version_specific_libs" >&6; }
+ac_config_headers="$ac_config_headers config.h"
-# -----------
-# Directories
-# -----------
-# Find the rest of the source tree framework.
# Default to --enable-multilib
# Check whether --enable-multilib was given.
if test "${enable_multilib+set}" = set; then :
@@ -2406,215 +2431,90 @@ fi
ac_config_commands="$ac_config_commands default-1"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
-$as_echo_n "checking host system type... " >&6; }
-if ${ac_cv_host+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test "x$host_alias" = x; then
- ac_cv_host=$ac_cv_build
-else
- ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
-fi
+# This works around the fact that libtool configuration may change LD
+# for this particular configuration, but some shells, instead of
+# keeping the changes in LD private, export them just because LD is
+# exported.
+ORIGINAL_LD_FOR_MULTILIBS=$LD
+
+####. ${srcdir}/configure.tgt
+
+
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f "$ac_dir/shtool"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
-$as_echo "$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
-esac
-host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
-$as_echo_n "checking target system type... " >&6; }
-if ${ac_cv_target+:} false; then :
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test "x$target_alias" = x; then
- ac_cv_target=$ac_cv_host
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
else
- ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
-$as_echo "$ac_cv_target" >&6; }
-case $ac_cv_target in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;;
-esac
-target=$ac_cv_target
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_target
-shift
-target_cpu=$1
-target_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-target_os=$*
-IFS=$ac_save_IFS
-case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
-
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-test -n "$target_alias" &&
- test "$program_prefix$program_suffix$program_transform_name" = \
- NONENONEs,x,x, &&
- program_prefix=${target_alias}-
-
-
-
-
-# Export source directory.
-# These need to be absolute paths, yet at the same time need to
-# canonicalize only relative paths, because then amd will not unmount
-# drives. Thus the use of PWDCMD: set it to 'pawd' or 'amq -w' if using amd.
-case $srcdir in
- \\/$* | ?:\\/*) glibcpp_srcdir=${srcdir} ;;
- *) glibcpp_srcdir=`cd "$srcdir" && ${PWDCMD-pwd} || echo "$srcdir"` ;;
-esac
-
-
-
-# Check whether --with-toolexeclibdir was given.
-if test "${with_toolexeclibdir+set}" = set; then :
- withval=$with_toolexeclibdir; case ${with_toolexeclibdir} in
- /)
- ;;
- */)
- with_toolexeclibdir=`echo $with_toolexeclibdir | sed 's,/$,,'`
- ;;
-esac
-else
- with_toolexeclibdir=no
-fi
-
-
-
-# Calculate toolexeclibdir
-# Also toolexecdir, though it's only used in toolexeclibdir
-case ${version_specific_libs} in
- yes)
- # Need the gcc compiler version to know where to install libraries
- # and header files if --enable-version-specific-runtime-libs option
- # is selected.
- toolexecdir='$(libdir)/gcc/$(target_noncanonical)'
- toolexeclibdir='$(toolexecdir)/$(gcc_version)$(MULTISUBDIR)'
- ;;
- no)
- if test -n "$with_cross_host" &&
- test x"$with_cross_host" != x"no"; then
- # Install a library built with a cross compiler in tooldir, not libdir.
- toolexecdir='$(exec_prefix)/$(target_noncanonical)'
- case ${with_toolexeclibdir} in
- no)
- toolexeclibdir='$(toolexecdir)/lib'
- ;;
- *)
- toolexeclibdir=${with_toolexeclibdir}
- ;;
- esac
- else
- toolexecdir='$(libdir)/gcc-lib/$(target_noncanonical)'
- toolexeclibdir='$(libdir)'
- fi
- multi_os_directory=`$CC -print-multi-os-directory`
- case $multi_os_directory in
- .) ;; # Avoid trailing /.
- *) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
- esac
- ;;
-esac
-
-
-
-# Figure out if we want to name the include directory and the
-# library name changes differently.
-includedirname=include
-libsuffix=
-case "${host}" in
- *-darwin*)
- # Darwin is the only target so far that needs a different include directory.
- includedirname=include-gnu-runtime
- libsuffix=-gnu
- ;;
-esac
-
-
-
-ac_config_headers="$ac_config_headers config.h"
-
-
-# --------
-# Programs
-# --------
-
-
-
-# We must force CC to /not/ be a precious variable; otherwise
-# the wrong, non-multilib-adjusted value will be used in multilibs.
-# As a side effect, we have to subst CFLAGS ourselves.
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
fi
if test -z "$ac_cv_prog_CC"; then
@@ -3391,447 +3291,679 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-# extra LD Flags which are required for targets
-
-
-
-case $host in
- *-cygwin* | *-mingw*)
- # 'host' will be top-level target in the case of a target lib,
- # we must compare to with_cross_host to decide if this is a native
- # or cross-compiler and select where to install dlls appropriately.
- if test -n "$with_cross_host" &&
- test x"$with_cross_host" != x"no"; then
- lt_host_flags='-no-undefined -bindir "$(toolexeclibdir)"';
- else
- lt_host_flags='-no-undefined -bindir "$(bindir)"';
- fi
- ;;
- *)
- lt_host_flags=
- ;;
-esac
-
-
-
-case "${host}" in
- *-darwin*)
- # Darwin needs -single_module when linking libgcobol
- extra_ldflags_libgcobol='$(lt_host_flags) -Wl,-single_module'
- ;;
- *-cygwin*|*-mingw*)
- # Tell libtool to build DLLs on Windows
- extra_ldflags_libgcobol='$(lt_host_flags)'
- ;;
-esac
-
-
-# Add CET specific flags if CET is enabled
-
- # Check whether --enable-cet was given.
-if test "${enable_cet+set}" = set; then :
- enableval=$enable_cet;
- case "$enableval" in
- yes|no|auto) ;;
- *) as_fn_error $? "Unknown argument to enable/disable cet" "$LINENO" 5 ;;
- esac
-
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- enable_cet=auto
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for CET support" >&5
-$as_echo_n "checking for CET support... " >&6; }
-
-# NB: Avoid nested save_CFLAGS and save_LDFLAGS.
-case "$host" in
- i[34567]86-*-linux* | x86_64-*-linux*)
- case "$enable_cet" in
- auto)
- # Check if target supports multi-byte NOPs
- # and if compiler and assembler support CET insn.
- cet_save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -fcf-protection"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main ()
{
-#if !defined(__SSE2__)
-#error target does not support multi-byte NOPs
-#else
-asm ("setssbsy");
-#endif
-
;
return 0;
}
_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- enable_cet=yes
-else
- enable_cet=no
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+ ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- CFLAGS="$cet_save_CFLAGS"
- ;;
- yes)
- # Check if assembler supports CET.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-int
-main ()
-{
-asm ("setssbsy");
- ;
- return 0;
-}
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if ${ac_cv_prog_CPP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
+if ac_fn_c_try_cpp "$LINENO"; then :
else
- as_fn_error $? "assembler with CET support is required for --enable-cet" "$LINENO" 5
+ # Broken: fails on valid input.
+continue
fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ;;
- esac
- ;;
- *)
- enable_cet=no
- ;;
-esac
-if test x$enable_cet = xyes; then
- CET_FLAGS="-fcf-protection -mshstk"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
+ # Passes both tests.
+ac_preproc_ok=:
+break
fi
+rm -f conftest.err conftest.i conftest.$ac_ext
-XCFLAGS="$XCFLAGS $CET_FLAGS"
-
-
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+ break
+fi
+ done
+ ac_cv_prog_CPP=$CPP
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AS+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
+fi
+ CPP=$ac_cv_prog_CPP
else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
+ ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AS="${ac_tool_prefix}as"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+else
+ # Broken: fails on valid input.
+continue
fi
-fi
-AS=$ac_cv_prog_AS
-if test -n "$AS"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
-$as_echo "$AS" >&6; }
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
+ # Passes both tests.
+ac_preproc_ok=:
+break
fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
fi
-if test -z "$ac_cv_prog_AS"; then
- ac_ct_AS=$AS
- # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_AS+:} false; then :
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$ac_ct_AS"; then
- ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
+ if test -z "$GREP"; then
+ ac_path_GREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
+ for ac_prog in grep ggrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_AS="as"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_GREP" || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+ # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'GREP' >> "conftest.nl"
+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_GREP="$ac_path_GREP"
+ ac_path_GREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
done
-IFS=$as_save_IFS
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
-fi
-fi
-ac_ct_AS=$ac_cv_prog_ac_ct_AS
-if test -n "$ac_ct_AS"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5
-$as_echo "$ac_ct_AS" >&6; }
+ $ac_path_GREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_GREP"; then
+ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
+ ac_cv_path_GREP=$GREP
fi
- if test "x$ac_ct_AS" = x; then
- AS=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- AS=$ac_ct_AS
- fi
-else
- AS="$ac_cv_prog_AS"
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AR+:} false; then :
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$AR"; then
- ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+ then ac_cv_path_EGREP="$GREP -E"
+ else
+ if test -z "$EGREP"; then
+ ac_path_EGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
+ for ac_prog in egrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AR="${ac_tool_prefix}ar"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_EGREP" || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+ # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'EGREP' >> "conftest.nl"
+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_EGREP="$ac_path_EGREP"
+ ac_path_EGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
done
-IFS=$as_save_IFS
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
-$as_echo "$AR" >&6; }
+ $ac_path_EGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_EGREP"; then
+ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
+ ac_cv_path_EGREP=$EGREP
fi
-
+ fi
fi
-if test -z "$ac_cv_prog_AR"; then
- ac_ct_AR=$AR
- # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_AR+:} false; then :
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$ac_ct_AR"; then
- ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_stdc=yes
else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_AR="ar"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
+ ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <string.h>
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
fi
+rm -f conftest*
+
fi
-ac_ct_AR=$ac_cv_prog_ac_ct_AR
-if test -n "$ac_ct_AR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
-$as_echo "$ac_ct_AR" >&6; }
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then :
+
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
+ ac_cv_header_stdc=no
fi
+rm -f conftest*
- if test "x$ac_ct_AR" = x; then
- AR=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- AR=$ac_ct_AR
- fi
-else
- AR="$ac_cv_prog_AR"
fi
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_RANLIB+:} false; then :
- $as_echo_n "(cached) " >&6
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then :
+ :
else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ return 2;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
+ ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
fi
fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
-$as_echo "$RANLIB" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
fi
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
fi
-if test -z "$ac_cv_prog_RANLIB"; then
- ac_ct_RANLIB=$RANLIB
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_RANLIB"; then
- ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_RANLIB="ranlib"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
+
done
- done
-IFS=$as_save_IFS
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
-$as_echo "$ac_ct_RANLIB" >&6; }
+
+
+ ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default"
+if test "x$ac_cv_header_minix_config_h" = xyes; then :
+ MINIX=yes
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
+ MINIX=
fi
- if test "x$ac_ct_RANLIB" = x; then
- RANLIB=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- RANLIB=$ac_ct_RANLIB
+
+ if test "$MINIX" = yes; then
+
+$as_echo "#define _POSIX_SOURCE 1" >>confdefs.h
+
+
+$as_echo "#define _POSIX_1_SOURCE 2" >>confdefs.h
+
+
+$as_echo "#define _MINIX 1" >>confdefs.h
+
fi
-else
- RANLIB="$ac_cv_prog_RANLIB"
-fi
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
-$as_echo_n "checking for a BSD-compatible install... " >&6; }
-if test -z "$INSTALL"; then
-if ${ac_cv_path_install+:} false; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5
+$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; }
+if ${ac_cv_safe_to_define___extensions__+:} false; then :
$as_echo_n "(cached) " >&6
else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in #((
- ./ | .// | /[cC]/* | \
- /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
- /usr/ucb/* ) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+# define __EXTENSIONS__ 1
+ $ac_includes_default
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_safe_to_define___extensions__=yes
+else
+ ac_cv_safe_to_define___extensions__=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5
+$as_echo "$ac_cv_safe_to_define___extensions__" >&6; }
+ test $ac_cv_safe_to_define___extensions__ = yes &&
+ $as_echo "#define __EXTENSIONS__ 1" >>confdefs.h
+
+ $as_echo "#define _ALL_SOURCE 1" >>confdefs.h
+
+ $as_echo "#define _GNU_SOURCE 1" >>confdefs.h
+
+ $as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h
+
+ $as_echo "#define _TANDEM_SOURCE 1" >>confdefs.h
+
+
+
+# Do not delete or change the following two lines. For why, see
+# http://gcc.gnu.org/ml/libstdc++/2003-07/msg00451.html
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$host_alias" = x; then
+ ac_cv_host=$ac_cv_build
+else
+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
+$as_echo_n "checking target system type... " >&6; }
+if ${ac_cv_target+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$target_alias" = x; then
+ ac_cv_target=$ac_cv_host
+else
+ ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
+$as_echo "$ac_cv_target" >&6; }
+case $ac_cv_target in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;;
+esac
+target=$ac_cv_target
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_target
+shift
+target_cpu=$1
+target_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+target_os=$*
+IFS=$ac_save_IFS
+case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
+
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+test -n "$target_alias" &&
+ test "$program_prefix$program_suffix$program_transform_name" = \
+ NONENONEs,x,x, &&
+ program_prefix=${target_alias}-
+
+target_alias=${target_alias-$host_alias}
+
+
+am__api_version='1.15'
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+ ./ | .// | /[cC]/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
if test $ac_prog = install &&
@@ -3889,46 +4021,124 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[\\\"\#\$\&\'\`$am_lf]*)
+ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+ *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
+ as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
+esac
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
-$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
- # Check whether --enable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then :
- enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
+ alias in your environment" "$LINENO" 5
+ fi
+ if test "$2" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
+ test "$2" = conftest.file
+ )
+then
+ # Ok.
+ :
else
- USE_MAINTAINER_MODE=no
+ as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
-$as_echo "$USE_MAINTAINER_MODE" >&6; }
- if test $USE_MAINTAINER_MODE = yes; then
- MAINTAINER_MODE_TRUE=
- MAINTAINER_MODE_FALSE='#'
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
+test "$program_prefix" != NONE &&
+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
else
- MAINTAINER_MODE_TRUE='#'
- MAINTAINER_MODE_FALSE=
+ am_missing_run=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
fi
- MAINT=$MAINTAINER_MODE_TRUE
-
-
-
-# Enable Win32 DLL on MS Windows - FIXME
-enable_win32_dll=yes
+if test x"${install_sh+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
-case $host in
-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AS+:} false; then :
+if ${ac_cv_prog_STRIP+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
@@ -3937,7 +4147,7 @@ do
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AS="${ac_tool_prefix}as"
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -3947,10 +4157,10 @@ IFS=$as_save_IFS
fi
fi
-AS=$ac_cv_prog_AS
-if test -n "$AS"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
-$as_echo "$AS" >&6; }
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
@@ -3958,17 +4168,17 @@ fi
fi
-if test -z "$ac_cv_prog_AS"; then
- ac_ct_AS=$AS
- # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_AS+:} false; then :
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$ac_ct_AS"; then
- ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
@@ -3977,7 +4187,7 @@ do
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_AS="as"
+ ac_cv_prog_ac_ct_STRIP="strip"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -3987,17 +4197,17 @@ IFS=$as_save_IFS
fi
fi
-ac_ct_AS=$ac_cv_prog_ac_ct_AS
-if test -n "$ac_ct_AS"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5
-$as_echo "$ac_ct_AS" >&6; }
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
- if test "x$ac_ct_AS" = x; then
- AS="false"
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
else
case $cross_compiling:$ac_tool_warned in
yes:)
@@ -4005,62 +4215,68 @@ yes:)
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
- AS=$ac_ct_AS
+ STRIP=$ac_ct_STRIP
fi
else
- AS="$ac_cv_prog_AS"
+ STRIP="$ac_cv_prog_STRIP"
fi
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_DLLTOOL+:} false; then :
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+ if ${ac_cv_path_mkdir+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
+ for ac_prog in mkdir gmkdir; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+ 'mkdir (GNU coreutils) '* | \
+ 'mkdir (coreutils) '* | \
+ 'mkdir (fileutils) '4.1*)
+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+ break 3;;
+ esac
+ done
+ done
done
IFS=$as_save_IFS
fi
-fi
-DLLTOOL=$ac_cv_prog_DLLTOOL
-if test -n "$DLLTOOL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
-$as_echo "$DLLTOOL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
+ test -d ./--version && rmdir ./--version
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ MKDIR_P="$ac_cv_path_mkdir -p"
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for MKDIR_P within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ MKDIR_P="$ac_install_sh -d"
+ fi
fi
-if test -z "$ac_cv_prog_DLLTOOL"; then
- ac_ct_DLLTOOL=$DLLTOOL
- # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+if ${ac_cv_prog_AWK+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$ac_ct_DLLTOOL"; then
- ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
@@ -4069,7 +4285,7 @@ do
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+ ac_cv_prog_AWK="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -4079,522 +4295,660 @@ IFS=$as_save_IFS
fi
fi
-ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
-if test -n "$ac_ct_DLLTOOL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
-$as_echo "$ac_ct_DLLTOOL" >&6; }
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
- if test "x$ac_ct_DLLTOOL" = x; then
- DLLTOOL="false"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- DLLTOOL=$ac_ct_DLLTOOL
- fi
-else
- DLLTOOL="$ac_cv_prog_DLLTOOL"
-fi
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OBJDUMP+:} false; then :
+ test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$OBJDUMP"; then
- ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+ cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+ *)
+ eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ SET_MAKE=
else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+ enableval=$enable_dependency_tracking;
fi
+
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+ am__nodep='_no'
fi
-OBJDUMP=$ac_cv_prog_OBJDUMP
-if test -n "$OBJDUMP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
-$as_echo "$OBJDUMP" >&6; }
+ if test "x$enable_dependency_tracking" != xno; then
+ AMDEP_TRUE=
+ AMDEP_FALSE='#'
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
+ AMDEP_TRUE='#'
+ AMDEP_FALSE=
fi
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+ enableval=$enable_silent_rules;
fi
-if test -z "$ac_cv_prog_OBJDUMP"; then
- ac_ct_OBJDUMP=$OBJDUMP
- # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+
+case $enable_silent_rules in # (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$ac_ct_OBJDUMP"; then
- ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+ if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_OBJDUMP="objdump"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
+ am_cv_make_support_nested_variables=no
fi
fi
-ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
-if test -n "$ac_ct_OBJDUMP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
-$as_echo "$ac_ct_OBJDUMP" >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
fi
+AM_BACKSLASH='\'
- if test "x$ac_ct_OBJDUMP" = x; then
- OBJDUMP="false"
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- OBJDUMP=$ac_ct_OBJDUMP
+ CYGPATH_W=echo
fi
-else
- OBJDUMP="$ac_cv_prog_OBJDUMP"
fi
- ;;
-esac
-test -z "$AS" && AS=as
+# Define the identity of the package.
+ PACKAGE='libgcobol'
+ VERSION='version-unused'
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
-test -z "$DLLTOOL" && DLLTOOL=dlltool
+# Some tools Automake needs.
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
-test -z "$OBJDUMP" && OBJDUMP=objdump
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+# We need awk for the "check" target (and possibly the TAP driver). The
+# system "awk" is bad on some platforms.
+# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
-case `pwd` in
- *\ * | *\ *)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
-$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
-esac
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar pax cpio none'
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
-macro_version='2.2.7a'
-macro_revision='1.3134'
+depcc="$CC" am_compiler_list=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CC_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ am__universal=false
+ case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CC_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CC_dependencies_compiler_type=none
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+ am__fastdepCC_TRUE=
+ am__fastdepCC_FALSE='#'
+else
+ am__fastdepCC_TRUE='#'
+ am__fastdepCC_FALSE=
+fi
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
-ltmain="$ac_aux_dir/ltmain.sh"
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
-# Backslashify metacharacters that are still active within
-# double-quoted strings.
-sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+END
+ as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+ fi
+fi
+ # ([1.15.1 no-define foreign no-dist -Wall -Wno-portability])
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
-$as_echo_n "checking how to print strings... " >&6; }
-# Test print first, because it will be a builtin if present.
-if test "X`print -r -- -n 2>/dev/null`" = X-n && \
- test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
- ECHO='print -r --'
-elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
- ECHO='printf %s\n'
-else
- # Use this function as a fallback that always works.
- func_fallback_echo ()
- {
- eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
- }
- ECHO='func_fallback_echo'
-fi
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
- $ECHO ""
-}
-case "$ECHO" in
- printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
-$as_echo "printf" >&6; } ;;
- print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
-$as_echo "print -r" >&6; } ;;
- *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
-$as_echo "cat" >&6; } ;;
-esac
+# Check whether --with-cross-host was given.
+if test "${with_cross_host+set}" = set; then :
+ withval=$with_cross_host;
+fi
+# Checks for header files.
+for ac_header in malloc.h
+do :
+ ac_fn_c_check_header_mongrel "$LINENO" "malloc.h" "ac_cv_header_malloc_h" "$ac_includes_default"
+if test "x$ac_cv_header_malloc_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_MALLOC_H 1
+_ACEOF
+fi
+done
+ case ${build_alias} in
+ "") build_noncanonical=${build} ;;
+ *) build_noncanonical=${build_alias} ;;
+esac
+ case ${host_alias} in
+ "") host_noncanonical=${build_noncanonical} ;;
+ *) host_noncanonical=${host_alias} ;;
+esac
+ case ${target_alias} in
+ "") target_noncanonical=${host_noncanonical} ;;
+ *) target_noncanonical=${target_alias} ;;
+esac
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
-$as_echo_n "checking for a sed that does not truncate output... " >&6; }
-if ${ac_cv_path_SED+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
- for ac_i in 1 2 3 4 5 6 7; do
- ac_script="$ac_script$as_nl$ac_script"
- done
- echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
- { ac_script=; unset ac_script;}
- if test -z "$SED"; then
- ac_path_SED_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in sed gsed; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_SED" || continue
-# Check for GNU ac_path_SED and select it if it is found.
- # Check for GNU $ac_path_SED
-case `"$ac_path_SED" --version 2>&1` in
-*GNU*)
- ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo '' >> "conftest.nl"
- "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_SED_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_SED="$ac_path_SED"
- ac_path_SED_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
- $ac_path_SED_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_SED"; then
- as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
- fi
+# post-stage1 host modules use a different CC_FOR_BUILD so, in order to
+# have matching libraries, they should use host libraries: Makefile.tpl
+# arranges to pass --with-build-libsubdir=$(HOST_SUBDIR).
+# However, they still use the build modules, because the corresponding
+# host modules (e.g. bison) are only built for the host when bootstrap
+# finishes. So:
+# - build_subdir is where we find build modules, and never changes.
+# - build_libsubdir is where we find build libraries, and can be overridden.
+
+# Prefix 'build-' so this never conflicts with target_subdir.
+build_subdir="build-${build_noncanonical}"
+
+# Check whether --with-build-libsubdir was given.
+if test "${with_build_libsubdir+set}" = set; then :
+ withval=$with_build_libsubdir; build_libsubdir="$withval"
else
- ac_cv_path_SED=$SED
+ build_libsubdir="$build_subdir"
fi
+# --srcdir=. covers the toplevel, while "test -d" covers the subdirectories
+if ( test $srcdir = . && test -d gcc ) \
+ || test -d $srcdir/../host-${host_noncanonical}; then
+ host_subdir="host-${host_noncanonical}"
+else
+ host_subdir=.
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
-$as_echo "$ac_cv_path_SED" >&6; }
- SED="$ac_cv_path_SED"
- rm -f conftest.sed
+# No prefix.
+target_subdir=${target_noncanonical}
-test -z "$SED" && SED=sed
-Xsed="$SED -e 1s/^X//"
+# -----------------
+# __int128 support
+# -----------------
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether __int128 is supported" >&5
+$as_echo_n "checking whether __int128 is supported... " >&6; }
+if ${libgcobol_cv_have_int128+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test x$gcc_no_link = xyes; then
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+ __int128 foo (__int128 )
+ {
+ __int128 aaa;
+ return (__int128) aaa;
+ }
+ __int128 bar (__int128 )
+ {
+ __int128 aaa;
+ return (__int128) aaa;
+ }
+int
+main ()
+{
+ foo (1);
+ bar (1);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ libgcobol_cv_have_int128=yes
+else
+ libgcobol_cv_have_int128=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
-$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if ${ac_cv_path_GREP+:} false; then :
- $as_echo_n "(cached) " >&6
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
else
- if test -z "$GREP"; then
- ac_path_GREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in grep ggrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_GREP" || continue
-# Check for GNU ac_path_GREP and select it if it is found.
- # Check for GNU $ac_path_GREP
-case `"$ac_path_GREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'GREP' >> "conftest.nl"
- "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_GREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_GREP="$ac_path_GREP"
- ac_path_GREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
+ if test x$gcc_no_link = xyes; then
+ as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
+fi
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+ __int128 foo (__int128 )
+ {
+ __int128 aaa;
+ return (__int128) aaa;
+ }
+
+ __int128 bar (__int128 )
+ {
+ __int128 aaa;
+ return (__int128) aaa;
+ }
+
+int
+main ()
+{
+
+ foo (1);
+ bar (1);
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+ libgcobol_cv_have_int128=yes
- $ac_path_GREP_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_GREP"; then
- as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
- fi
else
- ac_cv_path_GREP=$GREP
+
+ libgcobol_cv_have_int128=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libgcobol_cv_have_int128" >&5
+$as_echo "$libgcobol_cv_have_int128" >&6; }
+# The following conditional is useful when this creates a Makefile.am file that
+# is subsequently processed into a Makefile.in file. At the present time,
+# however the libgcobol build uses a hardcoded Makefile.in file.
+ if test "x$libgcobol_cv_have_int128" = xyes; then
+ BUILD_LIBGCOBOL_TRUE=
+ BUILD_LIBGCOBOL_FALSE='#'
+else
+ BUILD_LIBGCOBOL_TRUE='#'
+ BUILD_LIBGCOBOL_FALSE=
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for --enable-version-specific-runtime-libs" >&5
+$as_echo_n "checking for --enable-version-specific-runtime-libs... " >&6; }
+# Check whether --enable-version-specific-runtime-libs was given.
+if test "${enable_version_specific_runtime_libs+set}" = set; then :
+ enableval=$enable_version_specific_runtime_libs; case "$enableval" in
+ yes) version_specific_libs=yes ;;
+ no) version_specific_libs=no ;;
+ *) as_fn_error $? "Unknown argument to enable/disable version-specific libs" "$LINENO" 5;;
+ esac
+else
+ version_specific_libs=no
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
-$as_echo "$ac_cv_path_GREP" >&6; }
- GREP="$ac_cv_path_GREP"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $version_specific_libs" >&5
+$as_echo "$version_specific_libs" >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
-$as_echo_n "checking for egrep... " >&6; }
-if ${ac_cv_path_EGREP+:} false; then :
- $as_echo_n "(cached) " >&6
+
+# Check whether --with-slibdir was given.
+if test "${with_slibdir+set}" = set; then :
+ withval=$with_slibdir; slibdir="$with_slibdir"
else
- if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
- then ac_cv_path_EGREP="$GREP -E"
- else
- if test -z "$EGREP"; then
- ac_path_EGREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in egrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_EGREP" || continue
-# Check for GNU ac_path_EGREP and select it if it is found.
- # Check for GNU $ac_path_EGREP
-case `"$ac_path_EGREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'EGREP' >> "conftest.nl"
- "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_EGREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_EGREP="$ac_path_EGREP"
- ac_path_EGREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_EGREP_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_EGREP"; then
- as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
- fi
+ if test "${version_specific_libs}" = yes; then
+ slibdir='$(libsubdir)'
+elif test -n "$with_cross_host" && test x"$with_cross_host" != x"no"; then
+ slibdir='$(exec_prefix)/$(host_noncanonical)/lib'
else
- ac_cv_path_EGREP=$EGREP
+ slibdir='$(libdir)'
fi
-
- fi
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
-$as_echo "$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
-$as_echo_n "checking for fgrep... " >&6; }
-if ${ac_cv_path_FGREP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
- then ac_cv_path_FGREP="$GREP -F"
- else
- if test -z "$FGREP"; then
- ac_path_FGREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in fgrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_FGREP" || continue
-# Check for GNU ac_path_FGREP and select it if it is found.
- # Check for GNU $ac_path_FGREP
-case `"$ac_path_FGREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'FGREP' >> "conftest.nl"
- "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_FGREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_FGREP="$ac_path_FGREP"
- ac_path_FGREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
- $ac_path_FGREP_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_FGREP"; then
- as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
- fi
+# Command-line options.
+# Very limited version of AC_MAINTAINER_MODE.
+# Check whether --enable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then :
+ enableval=$enable_maintainer_mode; case ${enable_maintainer_mode} in
+ yes) MAINT='' ;;
+ no) MAINT='#' ;;
+ *) as_fn_error $? "--enable-maintainer-mode must be yes or no" "$LINENO" 5 ;;
+ esac
+ maintainer_mode=${enableval}
else
- ac_cv_path_FGREP=$FGREP
-fi
-
- fi
+ MAINT='#'
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
-$as_echo "$ac_cv_path_FGREP" >&6; }
- FGREP="$ac_cv_path_FGREP"
-test -z "$GREP" && GREP=grep
-
+toolexecdir=no
+toolexeclibdir=no
+# Calculate toolexeclibdir
+# Also toolexecdir, though it's only used in toolexeclibdir
+case ${version_specific_libs} in
+ yes)
+ # Need the gcc compiler version to know where to install libraries
+ # and header files if --enable-version-specific-runtime-libs option
+ # is selected.
+ toolexecdir='$(libdir)/gcc/$(target_noncanonical)'
+ toolexeclibdir='$(toolexecdir)/$(gcc_version)$(MULTISUBDIR)'
+ ;;
+ no)
+ if test -n "$with_cross_host" &&
+ test x"$with_cross_host" != x"no"; then
+ # Install a library built with a cross compiler in tooldir, not libdir.
+ toolexecdir='$(exec_prefix)/$(target_noncanonical)'
+ toolexeclibdir='$(toolexecdir)/lib'
+ else
+ toolexecdir='$(libdir)/gcc-lib/$(target_noncanonical)'
+ toolexeclibdir='$(libdir)'
+ fi
+ multi_os_directory=`$CC -print-multi-os-directory`
+ case $multi_os_directory in
+ .) ;; # Avoid trailing /.
+ *) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
+ esac
+ ;;
+esac
@@ -4603,204 +4957,187 @@ test -z "$GREP" && GREP=grep
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
+$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
+ # Check whether --enable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then :
+ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
+else
+ USE_MAINTAINER_MODE=no
+fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
+$as_echo "$USE_MAINTAINER_MODE" >&6; }
+ if test $USE_MAINTAINER_MODE = yes; then
+ MAINTAINER_MODE_TRUE=
+ MAINTAINER_MODE_FALSE='#'
+else
+ MAINTAINER_MODE_TRUE='#'
+ MAINTAINER_MODE_FALSE=
+fi
+ MAINT=$MAINTAINER_MODE_TRUE
+# Check the compiler.
+# The same as in boehm-gc and libstdc++. Have to borrow it from there.
+# We must force CC to /not/ be precious variables; otherwise
+# the wrong, non-multilib-adjusted value will be used in multilibs.
+# As a side effect, we have to subst CFLAGS ourselves.
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then :
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
else
- with_gnu_ld=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
fi
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
-$as_echo_n "checking for ld used by $CC... " >&6; }
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [\\/]* | ?:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
- # Canonicalize the pathname of ld
- ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
- while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
-$as_echo_n "checking for GNU ld... " >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
-$as_echo_n "checking for non-GNU ld... " >&6; }
+
fi
-if ${lt_cv_path_LD+:} false; then :
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some variants of GNU ld only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
- ;;
- *)
- test "$with_gnu_ld" != yes && break
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
fi
fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
-$as_echo "$LD" >&6; }
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
-test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if ${lt_cv_prog_gnu_ld+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- # I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- lt_cv_prog_gnu_ld=yes
- ;;
-*)
- lt_cv_prog_gnu_ld=no
- ;;
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
esac
+ CC=$ac_ct_CC
+ fi
+else
+ CC="$ac_cv_prog_CC"
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
-$as_echo "$lt_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
-$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
-if ${lt_cv_path_NM+:} false; then :
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$NM"; then
- # Let the user override the nm to test.
- lt_nm_to_check="$NM"
- else
- lt_nm_to_check="${ac_tool_prefix}nm"
- if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
- lt_nm_to_check="$lt_nm_to_check nm"
- fi
- fi
- for lt_tmp_nm in "$lt_nm_to_check"; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- # Strip out any user-provided options from the nm to test twice,
- # the first time to test to see if nm (rather than its options) has
- # an explicit path, the second time to yield a file which can be
- # nm'ed itself.
- tmp_nm_path="`$ECHO "$lt_tmp_nm" | sed 's, -.*$,,'`"
- case "$tmp_nm_path" in
- */*|*\\*) tmp_nm="$lt_tmp_nm";;
- *) tmp_nm="$ac_dir/$lt_tmp_nm";;
- esac
- tmp_nm_to_nm="`$ECHO "$tmp_nm" | sed 's, -.*$,,'`"
- if test -f "$tmp_nm_to_nm" || test -f "$tmp_nm_to_nm$ac_exeext" ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- case `"$tmp_nm" -B "$tmp_nm_to_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
- *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
- break
- ;;
- *)
- case `"$tmp_nm" -p "$tmp_nm_to_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
- *$tmp_nm*)
- lt_cv_path_NM="$tmp_nm -p"
- break
- ;;
- *)
- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- ;;
- esac
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
- done
- : ${lt_cv_path_NM=no}
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
-$as_echo "$lt_cv_path_NM" >&6; }
-if test "$lt_cv_path_NM" != "no"; then
- NM="$lt_cv_path_NM"
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
else
- # Didn't find any BSD compatible name lister, look for dumpbin.
- if test -n "$DUMPBIN"; then :
- # Let the user override the test.
- else
- if test -n "$ac_tool_prefix"; then
- for ac_prog in dumpbin "link -dump"
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_DUMPBIN+:} false; then :
+if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$DUMPBIN"; then
- ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
else
+ ac_prog_rejected=no
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
@@ -4808,7 +5145,11 @@ do
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -4816,34 +5157,44 @@ done
done
IFS=$as_save_IFS
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
fi
fi
-DUMPBIN=$ac_cv_prog_DUMPBIN
-if test -n "$DUMPBIN"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
-$as_echo "$DUMPBIN" >&6; }
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
- test -n "$DUMPBIN" && break
- done
fi
-if test -z "$DUMPBIN"; then
- ac_ct_DUMPBIN=$DUMPBIN
- for ac_prog in dumpbin "link -dump"
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl.exe
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$ac_ct_DUMPBIN"; then
- ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
@@ -4852,7 +5203,7 @@ do
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -4862,328 +5213,400 @@ IFS=$as_save_IFS
fi
fi
-ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
-if test -n "$ac_ct_DUMPBIN"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
-$as_echo "$ac_ct_DUMPBIN" >&6; }
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
- test -n "$ac_ct_DUMPBIN" && break
-done
-
- if test "x$ac_ct_DUMPBIN" = x; then
- DUMPBIN=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- DUMPBIN=$ac_ct_DUMPBIN
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl.exe
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
fi
- case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
- *COFF*)
- DUMPBIN="$DUMPBIN -symbols"
- ;;
- *)
- DUMPBIN=:
- ;;
- esac
- fi
- if test "$DUMPBIN" != ":"; then
- NM="$DUMPBIN"
+ test -n "$ac_ct_CC" && break
+done
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
fi
fi
-test -z "$NM" && NM=nm
-
+fi
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
-$as_echo_n "checking the name lister ($NM) interface... " >&6; }
-if ${lt_cv_nm_interface+:} false; then :
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
$as_echo_n "(cached) " >&6
else
- lt_cv_nm_interface="BSD nm"
- echo "int some_variable = 0;" > conftest.$ac_ext
- (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
- (eval "$ac_compile" 2>conftest.err)
- cat conftest.err >&5
- (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
- (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
- cat conftest.err >&5
- (eval echo "\"\$as_me:$LINENO: output\"" >&5)
- cat conftest.out >&5
- if $GREP 'External.*some_variable' conftest.out > /dev/null; then
- lt_cv_nm_interface="MS dumpbin"
- fi
- rm -f conftest*
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
-$as_echo "$lt_cv_nm_interface" >&6; }
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
-$as_echo_n "checking whether ln -s works... " >&6; }
-LN_S=$as_ln_s
-if test "$LN_S" = "ln -s"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
-$as_echo "no, using $LN_S" >&6; }
+ ac_compiler_gnu=no
fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
-# find the maximum length of command line arguments
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
-$as_echo_n "checking the maximum length of command line arguments... " >&6; }
-if ${lt_cv_sys_max_cmd_len+:} false; then :
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
$as_echo_n "(cached) " >&6
else
- i=0
- teststring="ABCD"
-
- case $build_os in
- msdosdjgpp*)
- # On DJGPP, this test can blow up pretty badly due to problems in libc
- # (any single argument exceeding 2000 bytes causes a buffer overrun
- # during glob expansion). Even if it were fixed, the result of this
- # check would be larger than it should be.
- lt_cv_sys_max_cmd_len=12288; # 12K is about right
- ;;
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
- gnu*)
- # Under GNU Hurd, this test is not required because there is
- # no limit to the length of command line arguments.
- # Libtool will interpret -1 as no limit whatsoever
- lt_cv_sys_max_cmd_len=-1;
- ;;
+int
+main ()
+{
- cygwin* | mingw* | cegcc*)
- # On Win9x/ME, this test blows up -- it succeeds, but takes
- # about 5 minutes as the teststring grows exponentially.
- # Worse, since 9x/ME are not pre-emptively multitasking,
- # you end up with a "frozen" computer, even though with patience
- # the test eventually succeeds (with a max line length of 256k).
- # Instead, let's just punt: use the minimum linelength reported by
- # all of the supported platforms: 8192 (on NT/2K/XP).
- lt_cv_sys_max_cmd_len=8192;
- ;;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+else
+ CFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
- mint*)
- # On MiNT this can take a long time and run out of memory.
- lt_cv_sys_max_cmd_len=8192;
- ;;
+int
+main ()
+{
- amigaos*)
- # On AmigaOS with pdksh, this test takes hours, literally.
- # So we just punt and use a minimum line length of 8192.
- lt_cv_sys_max_cmd_len=8192;
- ;;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
- # This has been around since 386BSD, at least. Likely further.
- if test -x /sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
- elif test -x /usr/sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
- else
- lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
- fi
- # And add a safety zone
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- ;;
+else
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
- interix*)
- # We know the value 262144 and hardcode it with a safety zone (like BSD)
- lt_cv_sys_max_cmd_len=196608
- ;;
-
- osf*)
- # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
- # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
- # nice to cause kernel panics so lets avoid the loop below.
- # First set a reasonable default.
- lt_cv_sys_max_cmd_len=16384
- #
- if test -x /sbin/sysconfig; then
- case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
- *1*) lt_cv_sys_max_cmd_len=-1 ;;
- esac
- fi
- ;;
- sco3.2v5*)
- lt_cv_sys_max_cmd_len=102400
- ;;
- sysv5* | sco5v6* | sysv4.2uw2*)
- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
- if test -n "$kargmax"; then
- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
- else
- lt_cv_sys_max_cmd_len=32768
- fi
- ;;
- *)
- lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
- if test -n "$lt_cv_sys_max_cmd_len"; then
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- else
- # Make teststring a little bigger before we do anything with it.
- # a 1K string should be a reasonable start.
- for i in 1 2 3 4 5 6 7 8 ; do
- teststring=$teststring$teststring
- done
- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
- # If test is not a shell built-in, we'll probably end up computing a
- # maximum length that is only half of the actual maximum length, but
- # we can't tell.
- while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \
- = "X$teststring$teststring"; } >/dev/null 2>&1 &&
- test $i != 17 # 1/2 MB should be enough
- do
- i=`expr $i + 1`
- teststring=$teststring$teststring
- done
- # Only check the string length outside the loop.
- lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
- teststring=
- # Add a significant safety factor because C++ compilers can tack on
- # massive amounts of additional arguments before passing them to the
- # linker. It appears as though 1/2 is a usable value.
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
- fi
- ;;
- esac
+int
+main ()
+{
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
fi
-
-if test -n $lt_cv_sys_max_cmd_len ; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
-$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
-$as_echo "none" >&6; }
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-
-
-
-
-
-: ${CP="cp -f"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
-$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
- = c,a/b,, \
- && eval 'test $(( 1 + 1 )) -eq 2 \
- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
- && xsi_shell=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
-$as_echo "$xsi_shell" >&6; }
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
-$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
- >/dev/null 2>&1 \
- && lt_shell_append=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
-$as_echo "$lt_shell_append" >&6; }
-
-
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- lt_unset=unset
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
else
- lt_unset=false
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
-
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
- # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
- lt_SP2NL='tr \040 \012'
- lt_NL2SP='tr \015\012 \040\040'
- ;;
- *) # EBCDIC based system
- lt_SP2NL='tr \100 \n'
- lt_NL2SP='tr \r\n \100\100'
- ;;
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+ xno)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int
+main ()
+{
+ ;
+ return 0;
+}
+_ACEOF
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+ ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
-$as_echo_n "checking for $LD option to reload object files... " >&6; }
-if ${lt_cv_ld_reload_flag+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_ld_reload_flag='-r'
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
-$as_echo "$lt_cv_ld_reload_flag" >&6; }
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
- darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
- else
- reload_cmds='$LD$reload_flag -o $output$reload_objs'
- fi
- ;;
-esac
-
-
-
-
-
-
-
-
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+if test -z "$CXX"; then
+ if test -n "$CCC"; then
+ CXX=$CCC
+ else
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OBJDUMP+:} false; then :
+if ${ac_cv_prog_CXX+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$OBJDUMP"; then
- ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+ if test -n "$CXX"; then
+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
@@ -5192,7 +5615,7 @@ do
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+ ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -5202,28 +5625,32 @@ IFS=$as_save_IFS
fi
fi
-OBJDUMP=$ac_cv_prog_OBJDUMP
-if test -n "$OBJDUMP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
-$as_echo "$OBJDUMP" >&6; }
+CXX=$ac_cv_prog_CXX
+if test -n "$CXX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
+$as_echo "$CXX" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
+ test -n "$CXX" && break
+ done
fi
-if test -z "$ac_cv_prog_OBJDUMP"; then
- ac_ct_OBJDUMP=$OBJDUMP
- # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
+if test -z "$CXX"; then
+ ac_ct_CXX=$CXX
+ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+if ${ac_cv_prog_ac_ct_CXX+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$ac_ct_OBJDUMP"; then
- ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+ if test -n "$ac_ct_CXX"; then
+ ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
@@ -5232,7 +5659,7 @@ do
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_OBJDUMP="objdump"
+ ac_cv_prog_ac_ct_CXX="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -5242,17 +5669,21 @@ IFS=$as_save_IFS
fi
fi
-ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
-if test -n "$ac_ct_OBJDUMP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
-$as_echo "$ac_ct_OBJDUMP" >&6; }
+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
+if test -n "$ac_ct_CXX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
+$as_echo "$ac_ct_CXX" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
- if test "x$ac_ct_OBJDUMP" = x; then
- OBJDUMP="false"
+
+ test -n "$ac_ct_CXX" && break
+done
+
+ if test "x$ac_ct_CXX" = x; then
+ CXX="g++"
else
case $cross_compiling:$ac_tool_warned in
yes:)
@@ -5260,255 +5691,429 @@ yes:)
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
- OBJDUMP=$ac_ct_OBJDUMP
+ CXX=$ac_ct_CXX
fi
-else
- OBJDUMP="$ac_cv_prog_OBJDUMP"
fi
-test -z "$OBJDUMP" && OBJDUMP=objdump
+ fi
+fi
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
+$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
+if ${ac_cv_cxx_compiler_gnu+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5
+$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GXX=yes
+else
+ GXX=
+fi
+ac_test_CXXFLAGS=${CXXFLAGS+set}
+ac_save_CXXFLAGS=$CXXFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
+$as_echo_n "checking whether $CXX accepts -g... " >&6; }
+if ${ac_cv_prog_cxx_g+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_cxx_werror_flag=$ac_cxx_werror_flag
+ ac_cxx_werror_flag=yes
+ ac_cv_prog_cxx_g=no
+ CXXFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int
+main ()
+{
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
-$as_echo_n "checking how to recognize dependent libraries... " >&6; }
-if ${lt_cv_deplibs_check_method+:} false; then :
- $as_echo_n "(cached) " >&6
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_prog_cxx_g=yes
else
- lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
+ CXXFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
-case $host_os in
-aix[4-9]*)
- lt_cv_deplibs_check_method=pass_all
- ;;
+int
+main ()
+{
-beos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
-bsdi[45]*)
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=/shlib/libc.so
- ;;
+else
+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+ CXXFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
-cygwin*)
- # func_win32_libid is a shell function defined in ltmain.sh
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- ;;
+int
+main ()
+{
-mingw* | pw32*)
- # Base MSYS/MinGW do not provide the 'file' command needed by
- # func_win32_libid shell function, so use a weaker test based on 'objdump',
- # unless we find 'file', for example because we are cross-compiling.
- # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
- if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_prog_cxx_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5
+$as_echo "$ac_cv_prog_cxx_g" >&6; }
+if test "$ac_test_CXXFLAGS" = set; then
+ CXXFLAGS=$ac_save_CXXFLAGS
+elif test $ac_cv_prog_cxx_g = yes; then
+ if test "$GXX" = yes; then
+ CXXFLAGS="-g -O2"
else
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
+ CXXFLAGS="-g"
fi
- ;;
+else
+ if test "$GXX" = yes; then
+ CXXFLAGS="-O2"
+ else
+ CXXFLAGS=
+ fi
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-cegcc*)
- # use the weaker test based on 'objdump'. See mingw*.
- lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- ;;
+depcc="$CXX" am_compiler_list=
-darwin* | rhapsody*)
- lt_cv_deplibs_check_method=pass_all
- ;;
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CXX_dependencies_compiler_type+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CXX_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ am__universal=false
+ case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac
-freebsd* | dragonfly*)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
- case $host_cpu in
- i*86 )
- # Not sure whether the presence of OpenBSD here was a mistake.
- # Let's accept both of them until this is cleared up.
- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
;;
+ nosideeffect)
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
esac
- else
- lt_cv_deplibs_check_method=pass_all
- fi
- ;;
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CXX_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CXX_dependencies_compiler_type=none
+fi
-haiku*)
- lt_cv_deplibs_check_method=pass_all
- ;;
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; }
+CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
-hpux10.20* | hpux11*)
- lt_cv_file_magic_cmd=/usr/bin/file
- case $host_cpu in
- ia64*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
- ;;
- hppa*64*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
- ;;
- *)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
- ;;
- esac
- ;;
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
+ am__fastdepCXX_TRUE=
+ am__fastdepCXX_FALSE='#'
+else
+ am__fastdepCXX_TRUE='#'
+ am__fastdepCXX_FALSE=
+fi
-interix[3-9]*)
- # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
- ;;
-irix5* | irix6* | nonstopux*)
- case $LD in
- *-32|*"-32 ") libmagic=32-bit;;
- *-n32|*"-n32 ") libmagic=N32;;
- *-64|*"-64 ") libmagic=64-bit;;
- *) libmagic=never-match;;
- esac
- lt_cv_deplibs_check_method=pass_all
- ;;
+# By default we simply use the C compiler to build assembly code.
-# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu | uclinuxfdpiceabi)
- lt_cv_deplibs_check_method=pass_all
- ;;
+test "${CCAS+set}" = set || CCAS=$CC
+test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS
-netbsd*)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
- fi
- ;;
-newos6*)
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libnls.so
- ;;
-*nto* | *qnx*)
- lt_cv_deplibs_check_method=pass_all
- ;;
+depcc="$CCAS" am_compiler_list=
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CCAS_dependencies_compiler_type+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CCAS_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
fi
- ;;
-
-osf3* | osf4* | osf5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-rdos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-solaris*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- lt_cv_deplibs_check_method=pass_all
- ;;
+ am__universal=false
-sysv4 | sysv4.3*)
- case $host_vendor in
- motorola)
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
- ;;
- ncr)
- lt_cv_deplibs_check_method=pass_all
- ;;
- sequent)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
- ;;
- sni)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
- lt_cv_file_magic_test_file=/lib/libc.so
- ;;
- siemens)
- lt_cv_deplibs_check_method=pass_all
- ;;
- pc)
- lt_cv_deplibs_check_method=pass_all
- ;;
- esac
- ;;
-tpf*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-vxworks*)
- # Assume VxWorks cross toolchains are built on Linux, possibly
- # as canadian for Windows hosts.
- lt_cv_deplibs_check_method=pass_all
- ;;
-esac
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CCAS_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CCAS_dependencies_compiler_type=none
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
-$as_echo "$lt_cv_deplibs_check_method" >&6; }
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-
-
-
-
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CCAS_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CCAS_dependencies_compiler_type" >&6; }
+CCASDEPMODE=depmode=$am_cv_CCAS_dependencies_compiler_type
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CCAS_dependencies_compiler_type" = gcc3; then
+ am__fastdepCCAS_TRUE=
+ am__fastdepCCAS_FALSE='#'
+else
+ am__fastdepCCAS_TRUE='#'
+ am__fastdepCCAS_FALSE=
+fi
-plugin_option=
-plugin_names="liblto_plugin.so liblto_plugin-0.dll cyglto_plugin-0.dll"
-for plugin in $plugin_names; do
- plugin_so=`${CC} ${CFLAGS} --print-prog-name $plugin`
- if test x$plugin_so = x$plugin; then
- plugin_so=`${CC} ${CFLAGS} --print-file-name $plugin`
- fi
- if test x$plugin_so != x$plugin; then
- plugin_option="--plugin $plugin_so"
- break
- fi
-done
+# In order to override CFLAGS_FOR_TARGET, all of our special flags go
+# in XCFLAGS. But we need them in CFLAGS during configury. So put them
+# in both places for now and restore CFLAGS at the end of config.
+save_CFLAGS="$CFLAGS"
+# Find other programs we need.
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
@@ -5587,7 +6192,7 @@ $as_echo "no" >&6; }
fi
if test "x$ac_ct_AR" = x; then
- AR="false"
+ AR=""
else
case $cross_compiling:$ac_tool_warned in
yes:)
@@ -5601,42 +6206,16 @@ else
AR="$ac_cv_prog_AR"
fi
-test -z "$AR" && AR=ar
-if test -n "$plugin_option"; then
- if $AR --help 2>&1 | grep -q "\--plugin"; then
- touch conftest.c
- $AR $plugin_option rc conftest.a conftest.c
- if test "$?" != 0; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Failed: $AR $plugin_option rc" >&5
-$as_echo "$as_me: WARNING: Failed: $AR $plugin_option rc" >&2;}
- else
- AR="$AR $plugin_option"
- fi
- rm -f conftest.*
- fi
-fi
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-
-
-
-
-
-
-
-
-
-
-
if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
+ # Extract the first word of "${ac_tool_prefix}nm", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nm; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_STRIP+:} false; then :
+if ${ac_cv_prog_NM+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+ if test -n "$NM"; then
+ ac_cv_prog_NM="$NM" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
@@ -5645,7 +6224,7 @@ do
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ ac_cv_prog_NM="${ac_tool_prefix}nm"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -5655,10 +6234,10 @@ IFS=$as_save_IFS
fi
fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
+NM=$ac_cv_prog_NM
+if test -n "$NM"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM" >&5
+$as_echo "$NM" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
@@ -5666,17 +6245,17 @@ fi
fi
-if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
+if test -z "$ac_cv_prog_NM"; then
+ ac_ct_NM=$NM
+ # Extract the first word of "nm", so it can be a program name with args.
+set dummy nm; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+if ${ac_cv_prog_ac_ct_NM+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+ if test -n "$ac_ct_NM"; then
+ ac_cv_prog_ac_ct_NM="$ac_ct_NM" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
@@ -5685,7 +6264,7 @@ do
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_STRIP="strip"
+ ac_cv_prog_ac_ct_NM="nm"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -5695,17 +6274,17 @@ IFS=$as_save_IFS
fi
fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
+ac_ct_NM=$ac_cv_prog_ac_ct_NM
+if test -n "$ac_ct_NM"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NM" >&5
+$as_echo "$ac_ct_NM" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
- if test "x$ac_ct_STRIP" = x; then
- STRIP=":"
+ if test "x$ac_ct_NM" = x; then
+ NM=""
else
case $cross_compiling:$ac_tool_warned in
yes:)
@@ -5713,19 +6292,12 @@ yes:)
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
- STRIP=$ac_ct_STRIP
+ NM=$ac_ct_NM
fi
else
- STRIP="$ac_cv_prog_STRIP"
+ NM="$ac_cv_prog_NM"
fi
-test -z "$STRIP" && STRIP=:
-
-
-
-
-
-
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
@@ -5804,7 +6376,7 @@ $as_echo "no" >&6; }
fi
if test "x$ac_ct_RANLIB" = x; then
- RANLIB=":"
+ RANLIB="ranlib-not-found-in-path-error"
else
case $cross_compiling:$ac_tool_warned in
yes:)
@@ -5818,41 +6390,51 @@ else
RANLIB="$ac_cv_prog_RANLIB"
fi
-test -z "$RANLIB" && RANLIB=:
-if test -n "$plugin_option" && test "$RANLIB" != ":"; then
- if $RANLIB --help 2>&1 | grep -q "\--plugin"; then
- RANLIB="$RANLIB $plugin_option"
- fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+ *)
+ eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ SET_MAKE=
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
fi
+case `pwd` in
+ *\ * | *\ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
+macro_version='2.2.7a'
+macro_revision='1.3134'
-if test -n "$RANLIB"; then
- case $host_os in
- openbsd*)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
- ;;
- *)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
- ;;
- esac
- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-case $host_os in
- darwin*)
- lock_old_archive_extraction=yes ;;
- *)
- lock_old_archive_extraction=no ;;
-esac
@@ -5864,57 +6446,148 @@ esac
+ltmain="$ac_aux_dir/ltmain.sh"
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`print -r -- -n 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='printf %s\n'
+else
+ # Use this function as a fallback that always works.
+ func_fallback_echo ()
+ {
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+ }
+ ECHO='func_fallback_echo'
+fi
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO ""
+}
+case "$ECHO" in
+ printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+ print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+ *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
-for ac_prog in gawk mawk nawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AWK+:} false; then :
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for ac_i in 1 2 3 4 5 6 7; do
+ ac_script="$ac_script$as_nl$ac_script"
+ done
+ echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+ { ac_script=; unset ac_script;}
+ if test -z "$SED"; then
+ ac_path_SED_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
+ for ac_prog in sed gsed; do
for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AWK="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
+ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_SED" || continue
+# Check for GNU ac_path_SED and select it if it is found.
+ # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo '' >> "conftest.nl"
+ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_SED_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_SED="$ac_path_SED"
+ ac_path_SED_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
done
-IFS=$as_save_IFS
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
-$as_echo "$AWK" >&6; }
+ $ac_path_SED_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_SED"; then
+ as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+ fi
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
+ ac_cv_path_SED=$SED
fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+ rm -f conftest.sed
- test -n "$AWK" && break
-done
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
@@ -5926,587 +6599,665 @@ done
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+ then ac_cv_path_FGREP="$GREP -F"
+ else
+ if test -z "$FGREP"; then
+ ac_path_FGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in fgrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_FGREP" || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+ # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'FGREP' >> "conftest.nl"
+ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_FGREP="$ac_path_FGREP"
+ ac_path_FGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+ $ac_path_FGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_FGREP"; then
+ as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_FGREP=$FGREP
+fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+test -z "$GREP" && GREP=grep
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-# Allow CC to be a program name with arguments.
-compiler=$CC
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
-$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
-if ${lt_cv_sys_global_symbol_pipe+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-# Character class describing NM global symbol codes.
-symcode='[BCDEGRST]'
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-# Define system-specific variables.
-case $host_os in
-aix*)
- symcode='[BCDT]'
- ;;
-cygwin* | mingw* | pw32* | cegcc*)
- symcode='[ABCDGISTW]'
- ;;
-hpux*)
- if test "$host_cpu" = ia64; then
- symcode='[ABCDEGRST]'
- fi
- ;;
-irix* | nonstopux*)
- symcode='[BCDEGRST]'
- ;;
-osf*)
- symcode='[BCDEGQRST]'
- ;;
-solaris*)
- symcode='[BCDRT]'
- ;;
-sco3.2v5*)
- symcode='[DT]'
- ;;
-sysv4.2uw2*)
- symcode='[DT]'
- ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
- symcode='[ABDT]'
- ;;
-sysv4)
- symcode='[DFNSTU]'
- ;;
-esac
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
- symcode='[ABCDGIRSTW]' ;;
-esac
-# Transform an extracted symbol line into a proper C declaration.
-# Some systems (esp. on ia64) link data and code symbols differently,
-# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
- opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
- ;;
-esac
-# Try without a prefix underscore, then with it.
-for ac_symprfx in "" "_"; do
- # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
- symxfrm="\\1 $ac_symprfx\\2 \\2"
- # Write the raw and C identifiers.
- if test "$lt_cv_nm_interface" = "MS dumpbin"; then
- # Fake it for dumpbin and say T for any non-static function
- # and D for any global variable.
- # Also find C++ and __fastcall symbols from MSVC++,
- # which start with @ or ?.
- lt_cv_sys_global_symbol_pipe="$AWK '"\
-" {last_section=section; section=\$ 3};"\
-" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
-" \$ 0!~/External *\|/{next};"\
-" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
-" {if(hide[section]) next};"\
-" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-" s[1]~/^[@?]/{print s[1], s[1]; next};"\
-" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
-" ' prfx=^$ac_symprfx"
- else
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
- fi
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
- # Check to see that the pipe works correctly.
- pipe_works=no
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | ?:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
+ ;;
+ *)
+ test "$with_gnu_ld" != yes && break
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
- rm -f conftest*
- cat > conftest.$ac_ext <<_LT_EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(void);
-void nm_test_func(void){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-_LT_EOF
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- # Now try to grab the symbols.
- nlist=conftest.nm
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
- (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s "$nlist"; then
- # Try sorting and uniquifying the output.
- if sort "$nlist" | uniq > "$nlist"T; then
- mv -f "$nlist"T "$nlist"
- else
- rm -f "$nlist"T
- fi
- # Make sure that we snagged all the symbols we need.
- if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
- if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<_LT_EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-_LT_EOF
- # Now generate the symbol file.
- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
- cat <<_LT_EOF >> conftest.$ac_ext
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- void *address;
-}
-lt__PROGRAM__LTX_preloaded_symbols[] =
-{
- { "@PROGRAM@", (void *) 0 },
-_LT_EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
- cat <<\_LT_EOF >> conftest.$ac_ext
- {0, (void *) 0}
-};
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
- return lt__PROGRAM__LTX_preloaded_symbols;
-}
-#endif
-#ifdef __cplusplus
-}
-#endif
-_LT_EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftstm.$ac_objext
- lt_save_LIBS="$LIBS"
- lt_save_CFLAGS="$CFLAGS"
- LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest${ac_exeext}; then
- pipe_works=yes
- fi
- LIBS="$lt_save_LIBS"
- CFLAGS="$lt_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $nlist" >&5
- fi
- else
- echo "cannot find nm_test_var in $nlist" >&5
- fi
- else
- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
- fi
- else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- fi
- rm -rf conftest* conftst*
- # Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
- break
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NM"; then
+ # Let the user override the nm to test.
+ lt_nm_to_check="$NM"
+ else
+ lt_nm_to_check="${ac_tool_prefix}nm"
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ fi
+ for lt_tmp_nm in "$lt_nm_to_check"; do
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ # Strip out any user-provided options from the nm to test twice,
+ # the first time to test to see if nm (rather than its options) has
+ # an explicit path, the second time to yield a file which can be
+ # nm'ed itself.
+ tmp_nm_path="`$ECHO "$lt_tmp_nm" | sed 's, -.*$,,'`"
+ case "$tmp_nm_path" in
+ */*|*\\*) tmp_nm="$lt_tmp_nm";;
+ *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+ esac
+ tmp_nm_to_nm="`$ECHO "$tmp_nm" | sed 's, -.*$,,'`"
+ if test -f "$tmp_nm_to_nm" || test -f "$tmp_nm_to_nm$ac_exeext" ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ case `"$tmp_nm" -B "$tmp_nm_to_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+ *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+ break
+ ;;
+ *)
+ case `"$tmp_nm" -p "$tmp_nm_to_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+ *$tmp_nm*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ if test -n "$DUMPBIN"; then :
+ # Let the user override the test.
else
- lt_cv_sys_global_symbol_pipe=
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in dumpbin "link -dump"
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DUMPBIN"; then
+ ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
done
+ done
+IFS=$as_save_IFS
fi
-
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
- lt_cv_sys_global_symbol_to_cdecl=
fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
-$as_echo "failed" >&6; }
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
-$as_echo "ok" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
fi
+ test -n "$DUMPBIN" && break
+ done
+fi
+if test -z "$DUMPBIN"; then
+ ac_ct_DUMPBIN=$DUMPBIN
+ for ac_prog in dumpbin "link -dump"
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DUMPBIN"; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+ test -n "$ac_ct_DUMPBIN" && break
+done
+ if test "x$ac_ct_DUMPBIN" = x; then
+ DUMPBIN=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DUMPBIN=$ac_ct_DUMPBIN
+ fi
+fi
+ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ *COFF*)
+ DUMPBIN="$DUMPBIN -symbols"
+ ;;
+ *)
+ DUMPBIN=:
+ ;;
+ esac
+ fi
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
+ fi
+fi
+test -z "$NM" && NM=nm
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+ cat conftest.out >&5
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+ fi
+ rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ i=0
+ teststring="ABCD"
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
+ cygwin* | mingw* | cegcc*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+ mint*)
+ # On MiNT this can take a long time and run out of memory.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
-# Check whether --enable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then :
- enableval=$enable_libtool_lock;
-fi
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- case `/usr/bin/file conftest.$ac_objext` in
- *ELF-32*)
- HPUX_IA64_MODE="32"
- ;;
- *ELF-64*)
- HPUX_IA64_MODE="64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '#line '$LINENO' "configure"' > conftest.$ac_ext
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- if test "$lt_cv_prog_gnu_ld" = yes; then
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -melf32bsmip"
- ;;
- *N32*)
- LD="${LD-ld} -melf32bmipn32"
- ;;
- *64-bit*)
- LD="${LD-ld} -melf64bmip"
- ;;
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
else
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
+ lt_cv_sys_max_cmd_len=32768
fi
- fi
- rm -rf conftest*
- ;;
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8 ; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \
+ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
+ ;;
+ esac
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
-s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- case `/usr/bin/file conftest.o` in
- *32-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_i386_fbsd"
- ;;
- x86_64-*linux*)
- case `/usr/bin/file conftest.o` in
- *x86-64*)
- LD="${LD-ld} -m elf32_x86_64"
- ;;
- *)
- LD="${LD-ld} -m elf_i386"
- ;;
- esac
- ;;
- powerpc64le-*linux*)
- LD="${LD-ld} -m elf32lppclinux"
- ;;
- powerpc64-*linux*)
- LD="${LD-ld} -m elf32ppclinux"
- ;;
- s390x-*linux*)
- LD="${LD-ld} -m elf_s390"
- ;;
- sparc64-*linux*)
- LD="${LD-ld} -m elf32_sparc"
- ;;
- esac
- ;;
- *64-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_x86_64_fbsd"
- ;;
- x86_64-*linux*)
- LD="${LD-ld} -m elf_x86_64"
- ;;
- powerpcle-*linux*)
- LD="${LD-ld} -m elf64lppc"
- ;;
- powerpc-*linux*)
- LD="${LD-ld} -m elf64ppc"
- ;;
- s390*-*linux*|s390*-*tpf*)
- LD="${LD-ld} -m elf64_s390"
- ;;
- sparc*-*linux*)
- LD="${LD-ld} -m elf64_sparc"
- ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
+fi
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
-$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
-if ${lt_cv_cc_needs_belf+:} false; then :
- $as_echo_n "(cached) " >&6
+if test -n $lt_cv_sys_max_cmd_len ; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
else
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- if test x$gcc_no_link = xyes; then
- as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
fi
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
+max_cmd_len=$lt_cv_sys_max_cmd_len
-int
-main ()
-{
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- lt_cv_cc_needs_belf=yes
-else
- lt_cv_cc_needs_belf=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
-$as_echo "$lt_cv_cc_needs_belf" >&6; }
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
- ;;
-sparc*-*solaris*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- case `/usr/bin/file conftest.o` in
- *64-bit*)
- case $lt_cv_prog_gnu_ld in
- yes*) LD="${LD-ld} -m elf64_sparc" ;;
- *)
- if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
- LD="${LD-ld} -64"
- fi
- ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-esac
-need_locks="$enable_libtool_lock"
- case $host_os in
- rhapsody* | darwin*)
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_DSYMUTIL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$DSYMUTIL"; then
- ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
-fi
-fi
-DSYMUTIL=$ac_cv_prog_DSYMUTIL
-if test -n "$DSYMUTIL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
-$as_echo "$DSYMUTIL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
-fi
-if test -z "$ac_cv_prog_DSYMUTIL"; then
- ac_ct_DSYMUTIL=$DSYMUTIL
- # Extract the first word of "dsymutil", so it can be a program name with args.
-set dummy dsymutil; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_DSYMUTIL"; then
- ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+ >/dev/null 2>&1 \
+ && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
-fi
-fi
-ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
-if test -n "$ac_ct_DSYMUTIL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
-$as_echo "$ac_ct_DSYMUTIL" >&6; }
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
+ lt_unset=false
fi
- if test "x$ac_ct_DSYMUTIL" = x; then
- DSYMUTIL=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
esac
- DSYMUTIL=$ac_ct_DSYMUTIL
- fi
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+ lt_cv_ld_reload_flag='-r'
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
-set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_NMEDIT+:} false; then :
+if ${ac_cv_prog_OBJDUMP+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$NMEDIT"; then
- ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+ if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
@@ -6515,7 +7266,7 @@ do
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+ ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -6525,10 +7276,10 @@ IFS=$as_save_IFS
fi
fi
-NMEDIT=$ac_cv_prog_NMEDIT
-if test -n "$NMEDIT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
-$as_echo "$NMEDIT" >&6; }
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
@@ -6536,17 +7287,17 @@ fi
fi
-if test -z "$ac_cv_prog_NMEDIT"; then
- ac_ct_NMEDIT=$NMEDIT
- # Extract the first word of "nmedit", so it can be a program name with args.
-set dummy nmedit; ac_word=$2
+if test -z "$ac_cv_prog_OBJDUMP"; then
+ ac_ct_OBJDUMP=$OBJDUMP
+ # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$ac_ct_NMEDIT"; then
- ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+ if test -n "$ac_ct_OBJDUMP"; then
+ ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
@@ -6555,7 +7306,7 @@ do
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_NMEDIT="nmedit"
+ ac_cv_prog_ac_ct_OBJDUMP="objdump"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -6565,17 +7316,17 @@ IFS=$as_save_IFS
fi
fi
-ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
-if test -n "$ac_ct_NMEDIT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
-$as_echo "$ac_ct_NMEDIT" >&6; }
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
- if test "x$ac_ct_NMEDIT" = x; then
- NMEDIT=":"
+ if test "x$ac_ct_OBJDUMP" = x; then
+ OBJDUMP="false"
else
case $cross_compiling:$ac_tool_warned in
yes:)
@@ -6583,31 +7334,277 @@ yes:)
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
- NMEDIT=$ac_ct_NMEDIT
+ OBJDUMP=$ac_ct_OBJDUMP
fi
else
- NMEDIT="$ac_cv_prog_NMEDIT"
+ OBJDUMP="$ac_cv_prog_OBJDUMP"
fi
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
-set dummy ${ac_tool_prefix}lipo; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_LIPO+:} false; then :
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$LIPO"; then
- ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi[45]*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+cegcc*)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+haiku*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
+
+interix[3-9]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | uclinuxfdpiceabi)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+ fi
+ ;;
+
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+openbsd*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
+
+tpf*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+vxworks*)
+ # Assume VxWorks cross toolchains are built on Linux, possibly
+ # as canadian for Windows hosts.
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+plugin_option=
+plugin_names="liblto_plugin.so liblto_plugin-0.dll cyglto_plugin-0.dll"
+for plugin in $plugin_names; do
+ plugin_so=`${CC} ${CFLAGS} --print-prog-name $plugin`
+ if test x$plugin_so = x$plugin; then
+ plugin_so=`${CC} ${CFLAGS} --print-file-name $plugin`
+ fi
+ if test x$plugin_so != x$plugin; then
+ plugin_option="--plugin $plugin_so"
+ break
+ fi
+done
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+ ac_cv_prog_AR="${ac_tool_prefix}ar"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -6617,10 +7614,10 @@ IFS=$as_save_IFS
fi
fi
-LIPO=$ac_cv_prog_LIPO
-if test -n "$LIPO"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
-$as_echo "$LIPO" >&6; }
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
@@ -6628,17 +7625,17 @@ fi
fi
-if test -z "$ac_cv_prog_LIPO"; then
- ac_ct_LIPO=$LIPO
- # Extract the first word of "lipo", so it can be a program name with args.
-set dummy lipo; ac_word=$2
+if test -z "$ac_cv_prog_AR"; then
+ ac_ct_AR=$AR
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$ac_ct_LIPO"; then
- ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
@@ -6647,7 +7644,7 @@ do
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_LIPO="lipo"
+ ac_cv_prog_ac_ct_AR="ar"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -6657,17 +7654,17 @@ IFS=$as_save_IFS
fi
fi
-ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
-if test -n "$ac_ct_LIPO"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
-$as_echo "$ac_ct_LIPO" >&6; }
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
- if test "x$ac_ct_LIPO" = x; then
- LIPO=":"
+ if test "x$ac_ct_AR" = x; then
+ AR="false"
else
case $cross_compiling:$ac_tool_warned in
yes:)
@@ -6675,22 +7672,48 @@ yes:)
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
- LIPO=$ac_ct_LIPO
+ AR=$ac_ct_AR
fi
else
- LIPO="$ac_cv_prog_LIPO"
+ AR="$ac_cv_prog_AR"
fi
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}otool; ac_word=$2
+test -z "$AR" && AR=ar
+if test -n "$plugin_option"; then
+ if $AR --help 2>&1 | grep -q "\--plugin"; then
+ touch conftest.c
+ $AR $plugin_option rc conftest.a conftest.c
+ if test "$?" != 0; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Failed: $AR $plugin_option rc" >&5
+$as_echo "$as_me: WARNING: Failed: $AR $plugin_option rc" >&2;}
+ else
+ AR="$AR $plugin_option"
+ fi
+ rm -f conftest.*
+ fi
+fi
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OTOOL+:} false; then :
+if ${ac_cv_prog_STRIP+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$OTOOL"; then
- ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
@@ -6699,7 +7722,7 @@ do
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -6709,10 +7732,10 @@ IFS=$as_save_IFS
fi
fi
-OTOOL=$ac_cv_prog_OTOOL
-if test -n "$OTOOL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
-$as_echo "$OTOOL" >&6; }
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
@@ -6720,17 +7743,17 @@ fi
fi
-if test -z "$ac_cv_prog_OTOOL"; then
- ac_ct_OTOOL=$OTOOL
- # Extract the first word of "otool", so it can be a program name with args.
-set dummy otool; ac_word=$2
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$ac_ct_OTOOL"; then
- ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
@@ -6739,7 +7762,7 @@ do
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_OTOOL="otool"
+ ac_cv_prog_ac_ct_STRIP="strip"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -6749,17 +7772,17 @@ IFS=$as_save_IFS
fi
fi
-ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
-if test -n "$ac_ct_OTOOL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
-$as_echo "$ac_ct_OTOOL" >&6; }
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
- if test "x$ac_ct_OTOOL" = x; then
- OTOOL=":"
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
else
case $cross_compiling:$ac_tool_warned in
yes:)
@@ -6767,22 +7790,29 @@ yes:)
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
- OTOOL=$ac_ct_OTOOL
+ STRIP=$ac_ct_STRIP
fi
else
- OTOOL="$ac_cv_prog_OTOOL"
+ STRIP="$ac_cv_prog_STRIP"
fi
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
-set dummy ${ac_tool_prefix}otool64; ac_word=$2
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OTOOL64+:} false; then :
+if ${ac_cv_prog_RANLIB+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$OTOOL64"; then
- ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
@@ -6791,7 +7821,7 @@ do
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -6801,10 +7831,10 @@ IFS=$as_save_IFS
fi
fi
-OTOOL64=$ac_cv_prog_OTOOL64
-if test -n "$OTOOL64"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
-$as_echo "$OTOOL64" >&6; }
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
@@ -6812,17 +7842,17 @@ fi
fi
-if test -z "$ac_cv_prog_OTOOL64"; then
- ac_ct_OTOOL64=$OTOOL64
- # Extract the first word of "otool64", so it can be a program name with args.
-set dummy otool64; ac_word=$2
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$ac_ct_OTOOL64"; then
- ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
@@ -6831,7 +7861,7 @@ do
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_OTOOL64="otool64"
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -6841,17 +7871,17 @@ IFS=$as_save_IFS
fi
fi
-ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
-if test -n "$ac_ct_OTOOL64"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
-$as_echo "$ac_ct_OTOOL64" >&6; }
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
- if test "x$ac_ct_OTOOL64" = x; then
- OTOOL64=":"
+ if test "x$ac_ct_RANLIB" = x; then
+ RANLIB=":"
else
case $cross_compiling:$ac_tool_warned in
yes:)
@@ -6859,20 +7889,47 @@ yes:)
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
- OTOOL64=$ac_ct_OTOOL64
+ RANLIB=$ac_ct_RANLIB
fi
else
- OTOOL64="$ac_cv_prog_OTOOL64"
+ RANLIB="$ac_cv_prog_RANLIB"
fi
+test -z "$RANLIB" && RANLIB=:
+if test -n "$plugin_option" && test "$RANLIB" != ":"; then
+ if $RANLIB --help 2>&1 | grep -q "\--plugin"; then
+ RANLIB="$RANLIB $plugin_option"
+ fi
+fi
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+case $host_os in
+ darwin*)
+ lock_old_archive_extraction=yes ;;
+ *)
+ lock_old_archive_extraction=no ;;
+esac
@@ -6891,529 +7948,263 @@ fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
-$as_echo_n "checking for -single_module linker flag... " >&6; }
-if ${lt_cv_apple_cc_single_mod+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_apple_cc_single_mod=no
- if test -z "${LT_MULTI_MODULE}"; then
- # By default we will add the -single_module flag. You can override
- # by either setting the environment variable LT_MULTI_MODULE
- # non-empty at configure time, or by adding -multi_module to the
- # link flags.
- rm -rf libconftest.dylib*
- echo "int foo(void){return 1;}" > conftest.c
- echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
--dynamiclib -Wl,-single_module conftest.c" >&5
- $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
- -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
- _lt_result=$?
- if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
- lt_cv_apple_cc_single_mod=yes
- else
- cat conftest.err >&5
- fi
- rm -rf libconftest.dylib*
- rm -f conftest.*
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
-$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
-$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
-if ${lt_cv_ld_exported_symbols_list+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_ld_exported_symbols_list=no
- save_LDFLAGS=$LDFLAGS
- echo "_main" > conftest.sym
- LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
- if test x$gcc_no_link = xyes; then
- as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
-fi
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-int
-main ()
-{
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- lt_cv_ld_exported_symbols_list=yes
-else
- lt_cv_ld_exported_symbols_list=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- LDFLAGS="$save_LDFLAGS"
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
-$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
-$as_echo_n "checking for -force_load linker flag... " >&6; }
-if ${lt_cv_ld_force_load+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_ld_force_load=no
- cat > conftest.c << _LT_EOF
-int forced_loaded() { return 2;}
-_LT_EOF
- echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
- $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
- echo "$AR cru libconftest.a conftest.o" >&5
- $AR cru libconftest.a conftest.o 2>&5
- cat > conftest.c << _LT_EOF
-int main() { return 0;}
-_LT_EOF
- echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
- $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
- _lt_result=$?
- if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then
- lt_cv_ld_force_load=yes
- else
- cat conftest.err >&5
- fi
- rm -f conftest.err libconftest.a conftest conftest.c
- rm -rf conftest.dSYM
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
-$as_echo "$lt_cv_ld_force_load" >&6; }
- # Allow for Darwin 4-7 (macOS 10.0-10.3) although these are not expect to
- # build without first building modern cctools / linker.
- case $host_cpu-$host_os in
- *-rhapsody* | *-darwin1.[012])
- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
- *-darwin1.*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
- *-darwin*)
- # darwin 5.x (macOS 10.1) onwards we only need to adjust when the
- # deployment target is forced to an earlier version.
- case ${MACOSX_DEPLOYMENT_TARGET-UNSET},$host in
- UNSET,*-darwin[89]*|UNSET,*-darwin[12][0-9]*)
- ;;
- 10.[012][,.]*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- *)
- ;;
- esac
- ;;
- esac
- if test "$lt_cv_apple_cc_single_mod" = "yes"; then
- _lt_dar_single_mod='$single_module'
- fi
- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
- else
- _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
- fi
- if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
- _lt_dsymutil='~$DSYMUTIL $lib || :'
- else
- _lt_dsymutil=
- fi
- ;;
- esac
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
-$as_echo_n "checking how to run the C preprocessor... " >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
- if ${ac_cv_prog_CPP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- # Double quotes because CPP needs to be expanded
- for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-else
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
- # Broken: success on invalid input.
-continue
-else
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
- break
-fi
- done
- ac_cv_prog_CPP=$CPP
-fi
- CPP=$ac_cv_prog_CPP
-else
- ac_cv_prog_CPP=$CPP
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
-$as_echo "$CPP" >&6; }
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-else
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
- # Broken: success on invalid input.
-continue
-else
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
-$as_echo_n "checking for ANSI C header files... " >&6; }
-if ${ac_cv_header_stdc+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-int
-main ()
-{
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_header_stdc=yes
-else
- ac_cv_header_stdc=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <string.h>
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
-fi
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
+# Allow CC to be a program name with arguments.
+compiler=$CC
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then :
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then :
- :
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- return 2;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-
-else
- ac_cv_header_stdc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
-$as_echo "$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
-fi
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
- inttypes.h stdint.h unistd.h
-do :
- as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
-"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[BCDT]'
+ ;;
+cygwin* | mingw* | pw32* | cegcc*)
+ symcode='[ABCDGISTW]'
+ ;;
+hpux*)
+ if test "$host_cpu" = ia64; then
+ symcode='[ABCDEGRST]'
+ fi
+ ;;
+irix* | nonstopux*)
+ symcode='[BCDEGRST]'
+ ;;
+osf*)
+ symcode='[BCDEGQRST]'
+ ;;
+solaris*)
+ symcode='[BCDRT]'
+ ;;
+sco3.2v5*)
+ symcode='[DT]'
+ ;;
+sysv4.2uw2*)
+ symcode='[DT]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[ABDT]'
+ ;;
+sysv4)
+ symcode='[DFNSTU]'
+ ;;
+esac
-fi
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[ABCDGIRSTW]' ;;
+esac
-done
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
-for ac_header in dlfcn.h
-do :
- ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
-"
-if test "x$ac_cv_header_dlfcn_h" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_DLFCN_H 1
-_ACEOF
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
-fi
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
-done
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+ # Write the raw and C identifiers.
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function
+ # and D for any global variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK '"\
+" {last_section=section; section=\$ 3};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+" s[1]~/^[@?]/{print s[1], s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx"
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+ rm -f conftest*
+ cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+ (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
-# Set options
-
-
-
- enable_dlopen=no
-
-
-
- # Check whether --enable-shared was given.
-if test "${enable_shared+set}" = set; then :
- enableval=$enable_shared; p=${PACKAGE-default}
- case $enableval in
- yes) enable_shared=yes ;;
- no) enable_shared=no ;;
- *)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac
-else
- enable_shared=yes
-fi
-
-
+ # Make sure that we snagged all the symbols we need.
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+_LT_EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+ cat <<_LT_EOF >> conftest.$ac_ext
+/* The mapping between symbol names and symbols. */
+const struct {
+ const char *name;
+ void *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
+};
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_save_LIBS="$LIBS"
+ lt_save_CFLAGS="$CFLAGS"
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+ LIBS="$lt_save_LIBS"
+ CFLAGS="$lt_save_CFLAGS"
+ else
+ echo "cannot find nm_test_func in $nlist" >&5
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&5
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+ fi
+ else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ fi
+ rm -rf conftest* conftst*
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
- # Check whether --enable-static was given.
-if test "${enable_static+set}" = set; then :
- enableval=$enable_static; p=${PACKAGE-default}
- case $enableval in
- yes) enable_static=yes ;;
- no) enable_static=no ;;
- *)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac
-else
- enable_static=yes
fi
-
-
-
-
-
-
-
-
-
-# Check whether --with-pic was given.
-if test "${with_pic+set}" = set; then :
- withval=$with_pic; pic_mode="$withval"
-else
- pic_mode=default
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
fi
-
-
-test -z "$pic_mode" && pic_mode=default
-
-
-
-
-
-
-
- # Check whether --enable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then :
- enableval=$enable_fast_install; p=${PACKAGE-default}
- case $enableval in
- yes) enable_fast_install=yes ;;
- no) enable_fast_install=no ;;
- *)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
else
- enable_fast_install=yes
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
fi
@@ -7426,26 +8217,6 @@ fi
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
@@ -7457,355 +8228,676 @@ LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-test -z "$LN_S" && LN_S="ln -s"
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
-$as_echo_n "checking for objdir... " >&6; }
-if ${lt_cv_objdir+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
- lt_cv_objdir=.libs
-else
- # MS-DOS does not allow filenames that begin with a dot.
- lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+ enableval=$enable_libtool_lock;
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
-$as_echo "$lt_cv_objdir" >&6; }
-objdir=$lt_cv_objdir
-
-
-
-
-
-cat >>confdefs.h <<_ACEOF
-#define LT_OBJDIR "$lt_cv_objdir/"
-_ACEOF
-
-
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-case $host_os in
-aix3*)
- # AIX sometimes has problems with the GCC collect2 program. For some
- # reason, if we set the COLLECT_NAMES environment variable, the problems
- # vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
;;
-esac
-
-# Global variables:
-ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-# Set sane defaults for various variables
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$LD" && LD=ld
-test -z "$ac_objext" && ac_objext=o
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ case `/usr/bin/file conftest.o` in
+ *x86-64*)
+ LD="${LD-ld} -m elf32_x86_64"
+ ;;
+ *)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ esac
+ ;;
+ powerpc64le-*linux*)
+ LD="${LD-ld} -m elf32lppclinux"
+ ;;
+ powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ powerpcle-*linux*)
+ LD="${LD-ld} -m elf64lppc"
+ ;;
+ powerpc-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ if test x$gcc_no_link = xyes; then
+ as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
+fi
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int
+main ()
+{
-# Only perform the check for file, if the check method requires it
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-case $deplibs_check_method in
-file_magic*)
- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
-$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
-if ${lt_cv_path_MAGIC_CMD+:} false; then :
- $as_echo_n "(cached) " >&6
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_cc_needs_belf=yes
else
- case $MAGIC_CMD in
-[\\/*] | ?:[\\/]*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
;;
-*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
- for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/${ac_tool_prefix}file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- $EGREP "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<_LT_EOF 1>&2
+sparc*-*solaris*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*) LD="${LD-ld} -m elf64_sparc" ;;
+ *)
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ LD="${LD-ld} -64"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+esac
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
+need_locks="$enable_libtool_lock"
-_LT_EOF
- fi ;;
- esac
- fi
- break
- fi
+
+ case $host_os in
+ rhapsody* | darwin*)
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DSYMUTIL"; then
+ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
- ;;
-esac
-fi
+IFS=$as_save_IFS
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
-$as_echo "$MAGIC_CMD" >&6; }
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
-
-
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
- if test -n "$ac_tool_prefix"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
-$as_echo_n "checking for file... " >&6; }
-if ${lt_cv_path_MAGIC_CMD+:} false; then :
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+ ac_ct_DSYMUTIL=$DSYMUTIL
+ # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
$as_echo_n "(cached) " >&6
else
- case $MAGIC_CMD in
-[\\/*] | ?:[\\/]*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
- ;;
-*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
- for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/file"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- $EGREP "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<_LT_EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-_LT_EOF
- fi ;;
- esac
- fi
- break
- fi
+ if test -n "$ac_ct_DSYMUTIL"; then
+ ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
- ;;
-esac
-fi
+IFS=$as_save_IFS
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
-$as_echo "$MAGIC_CMD" >&6; }
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
-
+ if test "x$ac_ct_DSYMUTIL" = x; then
+ DSYMUTIL=":"
else
- MAGIC_CMD=:
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DSYMUTIL=$ac_ct_DSYMUTIL
fi
+else
+ DSYMUTIL="$ac_cv_prog_DSYMUTIL"
fi
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NMEDIT"; then
+ ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
- ;;
-esac
+done
+ done
+IFS=$as_save_IFS
-# Use C for the default configuration in the libtool script
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
-lt_save_CC="$CC"
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+ ac_ct_NMEDIT=$NMEDIT
+ # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_NMEDIT"; then
+ ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_NMEDIT="nmedit"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
-# Source file extension for C test sources.
-ac_ext=c
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
-# Object file extension for compiled C test sources.
-objext=o
-objext=$objext
+ if test "x$ac_ct_NMEDIT" = x; then
+ NMEDIT=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ NMEDIT=$ac_ct_NMEDIT
+ fi
+else
+ NMEDIT="$ac_cv_prog_NMEDIT"
+fi
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$LIPO"; then
+ ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+ ac_ct_LIPO=$LIPO
+ # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_LIPO"; then
+ ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_LIPO="lipo"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+ if test "x$ac_ct_LIPO" = x; then
+ LIPO=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ LIPO=$ac_ct_LIPO
+ fi
+else
+ LIPO="$ac_cv_prog_LIPO"
+fi
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OTOOL"; then
+ ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-# Save the default compiler, since it gets overwritten when the other
-# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
-compiler_DEFAULT=$CC
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$RM conftest*
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+ ac_ct_OTOOL=$OTOOL
+ # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OTOOL"; then
+ ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_OTOOL="otool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$RM -r conftest*
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+ if test "x$ac_ct_OTOOL" = x; then
+ OTOOL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OTOOL=$ac_ct_OTOOL
+ fi
+else
+ OTOOL="$ac_cv_prog_OTOOL"
+fi
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-if test -n "$compiler"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL64+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OTOOL64"; then
+ ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
-lt_prog_compiler_no_builtin_flag=
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
-if test "$GCC" = yes; then
- case $cc_basename in
- nvcc*)
- lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
- *)
- lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
- esac
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
-if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+ ac_ct_OTOOL64=$OTOOL64
+ # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
$as_echo_n "(cached) " >&6
else
- lt_cv_prog_compiler_rtti_exceptions=no
- ac_outfile=conftest.$ac_objext
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="-fno-rtti -fno-exceptions"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_rtti_exceptions=yes
- fi
- fi
- $RM conftest*
+ if test -n "$ac_ct_OTOOL64"; then
+ ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_OTOOL64="otool64"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
- lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
else
- :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
fi
+ if test "x$ac_ct_OTOOL64" = x; then
+ OTOOL64=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OTOOL64=$ac_ct_OTOOL64
+ fi
+else
+ OTOOL64="$ac_cv_prog_OTOOL64"
fi
@@ -7813,402 +8905,207 @@ fi
- lt_prog_compiler_wl=
-lt_prog_compiler_pic=
-lt_prog_compiler_static=
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
-
- if test "$GCC" = yes; then
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_static='-static'
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static='-Bstatic'
- fi
- lt_prog_compiler_pic='-fPIC'
- ;;
- amigaos*)
- case $host_cpu in
- powerpc)
- # see comment about AmigaOS4 .so support
- lt_prog_compiler_pic='-fPIC'
- ;;
- m68k)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
- ;;
- esac
- ;;
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
- mingw* | cygwin* | pw32* | os2* | cegcc*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
- lt_prog_compiler_pic='-DDLL_EXPORT'
- ;;
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- lt_prog_compiler_pic='-fno-common'
- ;;
- haiku*)
- # PIC is the default for Haiku.
- # The "-static" flag exists, but is broken.
- lt_prog_compiler_static=
- ;;
- hpux*)
- # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
- # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
- # sets the default TLS model and affects inlining.
- case $host_cpu in
- hppa*64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic='-fPIC'
- ;;
- esac
- ;;
- interix[3-9]*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
- msdosdjgpp*)
- # Just because we use GCC doesn't mean we suddenly get shared libraries
- # on systems that don't support them.
- lt_prog_compiler_can_build_shared=no
- enable_shared=no
- ;;
- *nto* | *qnx*)
- # QNX uses GNU C++, but need to define -shared option too, otherwise
- # it will coredump.
- lt_prog_compiler_pic='-fPIC -shared'
- ;;
- sysv4*MP*)
- if test -d /usr/nec; then
- lt_prog_compiler_pic=-Kconform_pic
- fi
- ;;
- *)
- lt_prog_compiler_pic='-fPIC'
- ;;
- esac
- case $cc_basename in
- nvcc*) # Cuda Compiler Driver 2.2
- lt_prog_compiler_wl='-Xlinker '
- lt_prog_compiler_pic='-Xcompiler -fPIC'
- ;;
- esac
- else
- # PORTME Check for flag to pass linker flags through the system compiler.
- case $host_os in
- aix*)
- lt_prog_compiler_wl='-Wl,'
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static='-Bstatic'
- else
- lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- mingw* | cygwin* | pw32* | os2* | cegcc*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- lt_prog_compiler_pic='-DDLL_EXPORT'
- ;;
- hpux9* | hpux10* | hpux11*)
- lt_prog_compiler_wl='-Wl,'
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic='+Z'
- ;;
- esac
- # Is there a better lt_prog_compiler_static that works with the bundled CC?
- lt_prog_compiler_static='${wl}-a ${wl}archive'
- ;;
- irix5* | irix6* | nonstopux*)
- lt_prog_compiler_wl='-Wl,'
- # PIC (with -KPIC) is the default.
- lt_prog_compiler_static='-non_shared'
- ;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
- case $cc_basename in
- # old Intel for x86_64 which still supported -KPIC.
- ecc*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-static'
- ;;
- # icc used to be incompatible with GCC.
- # ICC 10 doesn't accept -KPIC any more.
- icc* | ifort*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-fPIC'
- lt_prog_compiler_static='-static'
- ;;
- # Lahey Fortran 8.1.
- lf95*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='--shared'
- lt_prog_compiler_static='--static'
- ;;
- pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
- # which looks to be a dead project)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-fpic'
- lt_prog_compiler_static='-Bstatic'
- ;;
- ccc*)
- lt_prog_compiler_wl='-Wl,'
- # All Alpha code is PIC.
- lt_prog_compiler_static='-non_shared'
- ;;
- xl* | bgxl* | bgf* | mpixl*)
- # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-qpic'
- lt_prog_compiler_static='-qstaticlink'
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ F* | *Sun*Fortran*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- lt_prog_compiler_wl=''
- ;;
- *Sun\ C*)
- # Sun C 5.9
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- lt_prog_compiler_wl='-Wl,'
- ;;
- esac
- ;;
- esac
- ;;
- newsos6)
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- ;;
- *nto* | *qnx*)
- # QNX uses GNU C++, but need to define -shared option too, otherwise
- # it will coredump.
- lt_prog_compiler_pic='-fPIC -shared'
- ;;
- osf3* | osf4* | osf5*)
- lt_prog_compiler_wl='-Wl,'
- # All OSF/1 code is PIC.
- lt_prog_compiler_static='-non_shared'
- ;;
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_apple_cc_single_mod=no
+ if test -z "${LT_MULTI_MODULE}"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&5
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+ if test x$gcc_no_link = xyes; then
+ as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
+fi
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
- rdos*)
- lt_prog_compiler_static='-non_shared'
- ;;
+int
+main ()
+{
- solaris*)
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- case $cc_basename in
- f77* | f90* | f95*)
- lt_prog_compiler_wl='-Qoption ld ';;
- *)
- lt_prog_compiler_wl='-Wl,';;
- esac
- ;;
-
- sunos4*)
- lt_prog_compiler_wl='-Qoption ld '
- lt_prog_compiler_pic='-PIC'
- lt_prog_compiler_static='-Bstatic'
- ;;
-
- sysv4 | sysv4.2uw2* | sysv4.3*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- ;;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_ld_exported_symbols_list=yes
+else
+ lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
- sysv4*MP*)
- if test -d /usr/nec ;then
- lt_prog_compiler_pic='-Kconform_pic'
- lt_prog_compiler_static='-Bstatic'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_force_load=no
+ cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+ echo "$AR cru libconftest.a conftest.o" >&5
+ $AR cru libconftest.a conftest.o 2>&5
+ cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+ _lt_result=$?
+ if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then
+ lt_cv_ld_force_load=yes
+ else
+ cat conftest.err >&5
fi
- ;;
-
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- ;;
-
- unicos*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_can_build_shared=no
- ;;
-
- uts4*)
- lt_prog_compiler_pic='-pic'
- lt_prog_compiler_static='-Bstatic'
- ;;
-
- *)
- lt_prog_compiler_can_build_shared=no
- ;;
- esac
- fi
+ rm -f conftest.err libconftest.a conftest conftest.c
+ rm -rf conftest.dSYM
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- lt_prog_compiler_pic=
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+ # Allow for Darwin 4-7 (macOS 10.0-10.3) although these are not expect to
+ # build without first building modern cctools / linker.
+ case $host_cpu-$host_os in
+ *-rhapsody* | *-darwin1.[012])
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ *-darwin1.*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ *-darwin*)
+ # darwin 5.x (macOS 10.1) onwards we only need to adjust when the
+ # deployment target is forced to an earlier version.
+ case ${MACOSX_DEPLOYMENT_TARGET-UNSET},$host in
+ UNSET,*-darwin[89]*|UNSET,*-darwin[12][0-9]*)
+ ;;
+ 10.[012][,.]*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+ ;;
+ *)
+ ;;
+ esac
;;
- *)
- lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+ esac
+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ _lt_dar_single_mod='$single_module'
+ fi
+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+ fi
;;
-esac
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
-$as_echo "$lt_prog_compiler_pic" >&6; }
-
+ esac
+for ac_header in dlfcn.h
+do :
+ ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+fi
+done
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
-if ${lt_cv_prog_compiler_pic_works+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler_pic_works=no
- ac_outfile=conftest.$ac_objext
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_pic_works=yes
- fi
- fi
- $RM conftest*
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
-$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
-if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
- case $lt_prog_compiler_pic in
- "" | " "*) ;;
- *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
- esac
-else
- lt_prog_compiler_pic=
- lt_prog_compiler_can_build_shared=no
-fi
-fi
+# Set options
+ enable_dlopen=no
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if ${lt_cv_prog_compiler_static_works+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler_static_works=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
- echo "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&5
- $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_static_works=yes
- fi
- else
- lt_cv_prog_compiler_static_works=yes
- fi
- fi
- $RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
+ enable_win32_dll=no
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
-$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
-if test x"$lt_cv_prog_compiler_static_works" = xyes; then
- :
+ # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+ enableval=$enable_shared; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
else
- lt_prog_compiler_static=
+ enable_shared=yes
fi
@@ -8217,134 +9114,77 @@ fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if ${lt_cv_prog_compiler_c_o+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler_c_o=no
- $RM -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_c_o=yes
- fi
- fi
- chmod u+w . 2>&5
- $RM conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
- $RM out/* && rmdir out
- cd ..
- $RM -r conftest
- $RM conftest*
+ # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+ enableval=$enable_static; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_static=yes
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
-$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if ${lt_cv_prog_compiler_c_o+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler_c_o=no
- $RM -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_c_o=yes
- fi
- fi
- chmod u+w . 2>&5
- $RM conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
- $RM out/* && rmdir out
- cd ..
- $RM -r conftest
- $RM conftest*
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+ withval=$with_pic; pic_mode="$withval"
+else
+ pic_mode=default
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
-$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+test -z "$pic_mode" && pic_mode=default
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
-$as_echo_n "checking if we can lock with hard links... " >&6; }
- hard_links=yes
- $RM conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
-$as_echo "$hard_links" >&6; }
- if test "$hard_links" = no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
- need_locks=warn
- fi
+
+
+
+
+
+ # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+ enableval=$enable_fast_install; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
else
- need_locks=no
+ enable_fast_install=yes
fi
@@ -8352,1236 +9192,3667 @@ fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
- runpath_var=
- allow_undefined_flag=
- always_export_symbols=no
- archive_cmds=
- archive_expsym_cmds=
- compiler_needs_object=no
- enable_shared_with_static_runtimes=no
- export_dynamic_flag_spec=
- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- hardcode_automatic=no
- hardcode_direct=no
- hardcode_direct_absolute=no
- hardcode_libdir_flag_spec=
- hardcode_libdir_flag_spec_ld=
- hardcode_libdir_separator=
- hardcode_minus_L=no
- hardcode_shlibpath_var=unsupported
- inherit_rpath=no
- link_all_deplibs=unknown
- module_cmds=
- module_expsym_cmds=
- old_archive_from_new_cmds=
- old_archive_from_expsyms_cmds=
- thread_safe_flag_spec=
- whole_archive_flag_spec=
- # include_expsyms should be a list of space-separated symbols to be *always*
- # included in the symbol list
- include_expsyms=
- # exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
- exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
- # platforms (ab)use it in PIC code, but their linkers get confused if
- # the symbol is explicitly referenced. Since portable code cannot
- # rely on this symbol name, it's probably fine to never include it in
- # preloaded symbol tables.
- # Exclude shared library initialization/finalization symbols.
- extract_expsyms_cmds=
- case $host_os in
- cygwin* | mingw* | pw32* | cegcc*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
- ;;
- interix*)
- # we just hope/assume this is gcc and not c89 (= MSVC++)
- with_gnu_ld=yes
- ;;
- openbsd*)
- with_gnu_ld=no
- ;;
- esac
- ld_shlibs=yes
- # On some targets, GNU ld is compatible enough with the native linker
- # that we're better off using the native interface for both.
- lt_use_gnu_ld_interface=no
- if test "$with_gnu_ld" = yes; then
- case $host_os in
- aix*)
- # The AIX port of GNU ld has always aspired to compatibility
- # with the native linker. However, as the warning in the GNU ld
- # block says, versions before 2.19.5* couldn't really create working
- # shared libraries, regardless of the interface used.
- case `$LD -v 2>&1` in
- *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
- *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
- *\ \(GNU\ Binutils\)\ [3-9]*) ;;
- *)
- lt_use_gnu_ld_interface=yes
- ;;
- esac
- ;;
- *)
- lt_use_gnu_ld_interface=yes
- ;;
- esac
- fi
- if test "$lt_use_gnu_ld_interface" = yes; then
- # If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
- # Set some defaults for GNU ld with shared library support. These
- # are reset later if shared libraries are not supported. Putting them
- # here allows them to be overridden if necessary.
- runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- export_dynamic_flag_spec='${wl}--export-dynamic'
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec=
- fi
- supports_anon_versioning=no
- case `$LD -v 2>&1` in
- *GNU\ gold*) supports_anon_versioning=yes ;;
- *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
- *\ 2.11.*) ;; # other 2.11 versions
- *) supports_anon_versioning=yes ;;
- esac
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
- # See if GNU ld supports shared libraries.
- case $host_os in
- aix[3-9]*)
- # On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
- ld_shlibs=no
- cat <<_LT_EOF 1>&2
-*** Warning: the GNU linker, at least up to release 2.19, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to install binutils
-*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
-*** You will then need to restart the configuration process.
-_LT_EOF
- fi
- ;;
- amigaos*)
- case $host_cpu in
- powerpc)
- # see comment about AmigaOS4 .so support
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds=''
- ;;
- m68k)
- archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- ;;
- esac
- ;;
- beos*)
- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- allow_undefined_flag=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
- cygwin* | mingw* | pw32* | cegcc*)
- # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
- # as there is no search path for DLLs.
- hardcode_libdir_flag_spec='-L$libdir'
- export_dynamic_flag_spec='${wl}--export-all-symbols'
- allow_undefined_flag=unsupported
- always_export_symbols=no
- enable_shared_with_static_runtimes=yes
- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- ld_shlibs=no
- fi
- ;;
- haiku*)
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- link_all_deplibs=yes
- ;;
- interix[3-9]*)
- hardcode_direct=no
- hardcode_shlibpath_var=no
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
- gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu | uclinuxfdpiceabi)
- tmp_diet=no
- if test "$host_os" = linux-dietlibc; then
- case $cc_basename in
- diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
- esac
- fi
- if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
- && test "$tmp_diet" = no
- then
- tmp_addflag=' $pic_flag'
- tmp_sharedflag='-shared'
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag'
- ;;
- pgf77* | pgf90* | pgf95* | pgfortran*)
- # Portland Group f77 and f90 compilers
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag -Mnomain' ;;
- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
- tmp_addflag=' -i_dynamic' ;;
- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
- tmp_addflag=' -i_dynamic -nofor_main' ;;
- ifc* | ifort*) # Intel Fortran compiler
- tmp_addflag=' -nofor_main' ;;
- lf95*) # Lahey Fortran 8.1
- whole_archive_flag_spec=
- tmp_sharedflag='--shared' ;;
- xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
- tmp_sharedflag='-qmkshrobj'
- tmp_addflag= ;;
- nvcc*) # Cuda Compiler Driver 2.2
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
- compiler_needs_object=yes
- ;;
- esac
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*) # Sun C 5.9
- whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
- compiler_needs_object=yes
- tmp_sharedflag='-G' ;;
- *Sun\ F*) # Sun Fortran 8.3
- tmp_sharedflag='-G' ;;
- esac
- archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
- archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
- case $cc_basename in
- xlf* | bgf* | bgxlf* | mpixlf*)
- # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
- whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
- hardcode_libdir_flag_spec=
- hardcode_libdir_flag_spec_ld='-rpath $libdir'
- archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
- archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
- fi
- ;;
- esac
- else
- ld_shlibs=no
- fi
- ;;
- netbsd*)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
- solaris*)
- if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
- ld_shlibs=no
- cat <<_LT_EOF 1>&2
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-_LT_EOF
- elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
- ld_shlibs=no
- cat <<_LT_EOF 1>&2
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-_LT_EOF
- ;;
- *)
- # For security reasons, it is highly recommended that you always
- # use absolute paths for naming shared libraries, and exclude the
- # DT_RUNPATH tag from executables and libraries. But doing so
- # requires that you compile everything twice, which is a pain.
- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
- esac
- ;;
- sunos4*)
- archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- wlarc=
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
- *)
- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
- esac
- if test "$ld_shlibs" = no; then
- runpath_var=
- hardcode_libdir_flag_spec=
- export_dynamic_flag_spec=
- whole_archive_flag_spec=
- fi
- else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case $host_os in
- aix3*)
- allow_undefined_flag=unsupported
- always_export_symbols=yes
- archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- hardcode_minus_L=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- hardcode_direct=unsupported
- fi
- ;;
- aix[4-9]*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- # Also, AIX nm treats weak defined symbols like other global
- # defined symbols, whereas GNU nm marks them as "W".
- if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
- else
- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
- fi
- aix_use_runtimelinking=no
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
- for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
- done
- ;;
- esac
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+test -z "$LN_S" && LN_S="ln -s"
- archive_cmds=''
- hardcode_direct=yes
- hardcode_direct_absolute=yes
- hardcode_libdir_separator=':'
- link_all_deplibs=yes
- file_list_spec='${wl}-f,'
- if test "$GCC" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" &&
- strings "$collect2name" | $GREP resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- hardcode_direct=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- hardcode_minus_L=yes
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_libdir_separator=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
- export_dynamic_flag_spec='${wl}-bexpall'
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- always_export_symbols=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- allow_undefined_flag='-berok'
- # Determine the default libpath from the value encoded in an
- # empty executable.
- if test x$gcc_no_link = xyes; then
- as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
-fi
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-int
-main ()
-{
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
- allow_undefined_flag="-z nodefs"
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an
- # empty executable.
- if test x$gcc_no_link = xyes; then
- as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
-fi
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-int
-main ()
-{
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if ${lt_cv_objdir+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ lt_cv_objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ lt_cv_objdir=_libs
fi
+rmdir .libs 2>/dev/null
fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- no_undefined_flag=' ${wl}-bernotok'
- allow_undefined_flag=' ${wl}-berok'
- if test "$with_gnu_ld" = yes; then
- # We only use this code for GNU lds that support --whole-archive.
- whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
- else
- # Exported symbols can be pulled into shared objects from archives
- whole_archive_flag_spec='$convenience'
- fi
- archive_cmds_need_lc=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
- amigaos*)
- case $host_cpu in
- powerpc)
- # see comment about AmigaOS4 .so support
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds=''
- ;;
- m68k)
- archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- ;;
- esac
- ;;
- bsdi[45]*)
- export_dynamic_flag_spec=-rdynamic
- ;;
- cygwin* | mingw* | pw32* | cegcc*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec=' '
- allow_undefined_flag=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- old_archive_from_new_cmds='true'
- # FIXME: Should let the user specify the lib program.
- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
- fix_srcfile_path='`cygpath -w "$srcfile"`'
- enable_shared_with_static_runtimes=yes
- ;;
- darwin* | rhapsody*)
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
- # Publish an arg to allow the user to select that Darwin host (and target)
- # libraries should be given install-names like @rpath/libfoo.dylib. This
- # requires that the user of the library then adds an 'rpath' to the DSO that
- # needs access.
- # NOTE: there are defaults below, for systems that support rpaths. The person
- # configuring can override the defaults for any system version that supports
- # them - they are, however, forced off for system versions without support.
- # Check whether --enable-darwin-at-rpath was given.
-if test "${enable_darwin_at_rpath+set}" = set; then :
- enableval=$enable_darwin_at_rpath; if test "x$enable_darwin_at_rpath" = "xyes"; then
- # This is not supported before macOS 10.5 / Darwin9.
- case ${MACOSX_DEPLOYMENT_TARGET-UNSET},$host_os in
- UNSET,darwin[4-8]*|UNSET,rhapsody*|10.[0-4][,.]*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Darwin @rpath library names are incompatible with OSX versions earlier than 10.5 (rpaths disabled)" >&5
-$as_echo "$as_me: WARNING: Darwin @rpath library names are incompatible with OSX versions earlier than 10.5 (rpaths disabled)" >&2;}
- enable_darwin_at_rpath=no
- ;;
- esac
- fi
-else
- case ${MACOSX_DEPLOYMENT_TARGET-UNSET},$host_os in
- # As above, before 10.5 / Darwin9 this does not work.
- UNSET,darwin[4-8]*|UNSET,rhapsody*|10.[0-4][,.]*)
- enable_darwin_at_rpath=no
- ;;
-
- # We cannot build and test reliably on macOS 10.11+ (Darwin15+) without use
- # of rpaths, since runpaths set via DYLD_LIBRARY_PATH are elided by key
- # system executables (e.g. /bin/sh). Force rpaths on for these systems.
- UNSET,darwin1[5-9]*|UNSET,darwin2*|10.1[1-9][,.]*|1[1-9].*[,.]* )
- { $as_echo "$as_me:${as_lineno-$LINENO}: @rpath library names are needed on macOS versions later than 10.11 (rpaths have been enabled)" >&5
-$as_echo "$as_me: @rpath library names are needed on macOS versions later than 10.11 (rpaths have been enabled)" >&6;}
- enable_darwin_at_rpath=yes
- ;;
- # NOTE: we are not (yet) doing anything for 10.5 .. 10.10, since they can
- # work with either DYLD_LIBRARY_PATH or embedded rpaths.
- esac
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
-fi
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
- archive_cmds_need_lc=no
- hardcode_direct=no
- hardcode_automatic=yes
- hardcode_shlibpath_var=unsupported
- if test "$lt_cv_ld_force_load" = "yes"; then
- whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
- else
- whole_archive_flag_spec=''
- fi
- link_all_deplibs=yes
- allow_undefined_flag="$_lt_dar_allow_undefined"
- case $cc_basename in
- ifort*) _lt_dar_can_shared=yes ;;
- *) _lt_dar_can_shared=$GCC ;;
- esac
- if test "$_lt_dar_can_shared" = "yes"; then
- output_verbose_link_cmd=func_echo_all
- _lt_install_name='\$rpath/\$soname'
- if test "x$enable_darwin_at_rpath" = "xyes"; then
- _lt_install_name='@rpath/\$soname'
- fi
- archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name ${_lt_install_name} \$verstring ${_lt_dsymutil}"
- module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name ${_lt_install_name} \$verstring ${_lt_dar_export_syms}${_lt_dsymutil}"
- module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+with_gnu_ld="$lt_cv_prog_gnu_ld"
- else
- ld_shlibs=no
- fi
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
- ;;
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
- dgux*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_shlibpath_var=no
- ;;
+for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2.*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
- ;;
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/${ac_tool_prefix}file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
- hpux9*)
- if test "$GCC" = yes; then
- archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+_LT_EOF
+ fi ;;
+ esac
fi
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_direct=yes
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac
+fi
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- export_dynamic_flag_spec='${wl}-E'
- ;;
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
- hpux10*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_flag_spec_ld='+b $libdir'
- hardcode_libdir_separator=:
- hardcode_direct=yes
- hardcode_direct_absolute=yes
- export_dynamic_flag_spec='${wl}-E'
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- fi
- ;;
- hpux11*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
- case $host_cpu in
- hppa*64*)
- archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- else
- case $host_cpu in
- hppa*64*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- # Older versions of the 11.00 compiler do not understand -b yet
- # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
-$as_echo_n "checking if $CC understands -b... " >&6; }
-if ${lt_cv_prog_compiler__b+:} false; then :
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
$as_echo_n "(cached) " >&6
else
- lt_cv_prog_compiler__b=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -b"
- echo "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&5
- $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- lt_cv_prog_compiler__b=yes
- fi
- else
- lt_cv_prog_compiler__b=yes
- fi
- fi
- $RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
-$as_echo "$lt_cv_prog_compiler__b" >&6; }
-if test x"$lt_cv_prog_compiler__b" = xyes; then
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
else
- archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
fi
- ;;
- esac
- fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- case $host_cpu in
- hppa*64*|ia64*)
- hardcode_direct=no
- hardcode_shlibpath_var=no
- ;;
- *)
- hardcode_direct=yes
- hardcode_direct_absolute=yes
- export_dynamic_flag_spec='${wl}-E'
+ else
+ MAGIC_CMD=:
+ fi
+fi
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- ;;
- esac
- fi
- ;;
+ fi
+ ;;
+esac
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- # Try to use the -exported_symbol ld option, if it does not
- # work, assume that -exports_file does not work either and
- # implicitly export all symbols.
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
- if test x$gcc_no_link = xyes; then
- as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
-fi
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-int foo(void) {}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+# Use C for the default configuration in the libtool script
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- LDFLAGS="$save_LDFLAGS"
- else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
- fi
- archive_cmds_need_lc='no'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- inherit_rpath=yes
- link_all_deplibs=yes
- ;;
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
- netbsd*)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
- archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
- fi
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
- newsos6)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_shlibpath_var=no
- ;;
+# Source file extension for C test sources.
+ac_ext=c
- *nto* | *qnx*)
- ;;
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- hardcode_direct_absolute=yes
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
- else
- case $host_os in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- ;;
- *)
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- else
- ld_shlibs=no
- fi
- ;;
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
- os2*)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- allow_undefined_flag=unsupported
- archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
- ;;
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
- osf3*)
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- fi
- archive_cmds_need_lc='no'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- else
- allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
- # Both c and cxx compiler support -rpath directly
- hardcode_libdir_flag_spec='-rpath $libdir'
- fi
- archive_cmds_need_lc='no'
- hardcode_libdir_separator=:
- ;;
- solaris*)
- no_undefined_flag=' -z defs'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
- else
- case `$CC -V 2>&1` in
- *"Compilers 5.0"*)
- wlarc=''
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
- ;;
- *)
- wlarc='${wl}'
- archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
- ;;
- esac
- fi
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_shlibpath_var=no
- case $host_os in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
- *)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
- # but is careful enough not to reorder.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- else
- whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
- fi
- ;;
- esac
- link_all_deplibs=yes
- ;;
- sunos4*)
- if test "x$host_vendor" = xsequent; then
- # Use $CC to link under sequent, because it throws in some extra .o
- # files that make .init and .fini sections work.
- archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+ case $cc_basename in
+ nvcc*)
+ lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+ *)
+ lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+ esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_rtti_exceptions=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="-fno-rtti -fno-exceptions"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_rtti_exceptions=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+ :
+fi
+
+fi
+
+
+
+
+
+
+ lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+
+ if test "$GCC" = yes; then
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_static='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
fi
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
+ lt_prog_compiler_pic='-fPIC'
;;
- sysv4)
- case $host_vendor in
- sni)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes # is this really true???
- ;;
- siemens)
- ## LD is ld it makes a PLAMLIB
- ## CC just makes a GrossModule.
- archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- reload_cmds='$CC -r -o $output$reload_objs'
- hardcode_direct=no
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
;;
- motorola)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=no #Motorola manual says yes, but my tests say they lie
- ;;
esac
- runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var=no
;;
- sysv4.3*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var=no
- export_dynamic_flag_spec='-Bexport'
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
;;
- sysv4*MP*)
- if test -d /usr/nec; then
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- ld_shlibs=yes
- fi
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ lt_prog_compiler_pic='-DDLL_EXPORT'
;;
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
- no_undefined_flag='${wl}-z,text'
- archive_cmds_need_lc=no
- hardcode_shlibpath_var=no
- runpath_var='LD_RUN_PATH'
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic='-fno-common'
+ ;;
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ lt_prog_compiler_static=
;;
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- no_undefined_flag='${wl}-z,text'
- allow_undefined_flag='${wl}-z,nodefs'
- archive_cmds_need_lc=no
- hardcode_shlibpath_var=no
- hardcode_libdir_flag_spec='${wl}-R,$libdir'
- hardcode_libdir_separator=':'
- link_all_deplibs=yes
- export_dynamic_flag_spec='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+ ;;
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
+ interix[3-9]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
;;
- uts4*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_shlibpath_var=no
+ msdosdjgpp*)
+ # Just because we use GCC doesn't mean we suddenly get shared libraries
+ # on systems that don't support them.
+ lt_prog_compiler_can_build_shared=no
+ enable_shared=no
;;
- *)
- ld_shlibs=no
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
;;
- esac
- if test x$host_vendor = xsni; then
- case $host in
- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- export_dynamic_flag_spec='${wl}-Blargedynsym'
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ lt_prog_compiler_pic=-Kconform_pic
+ fi
+ ;;
+
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+
+ case $cc_basename in
+ nvcc*) # Cuda Compiler Driver 2.2
+ lt_prog_compiler_wl='-Xlinker '
+ lt_prog_compiler_pic='-Xcompiler -fPIC'
+ ;;
+ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+ aix*)
+ lt_prog_compiler_wl='-Wl,'
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ else
+ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='+Z'
;;
esac
- fi
+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
+ lt_prog_compiler_static='${wl}-a ${wl}archive'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC (with -KPIC) is the default.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ # old Intel for x86_64 which still supported -KPIC.
+ ecc*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ # icc used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ icc* | ifort*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ # Lahey Fortran 8.1.
+ lf95*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='--shared'
+ lt_prog_compiler_static='--static'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fpic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ ccc*)
+ lt_prog_compiler_wl='-Wl,'
+ # All Alpha code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+ xl* | bgxl* | bgf* | mpixl*)
+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-qpic'
+ lt_prog_compiler_static='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ F* | *Sun*Fortran*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl=''
+ ;;
+ *Sun\ C*)
+ # Sun C 5.9
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl='-Wl,'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ newsos6)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
+ osf3* | osf4* | osf5*)
+ lt_prog_compiler_wl='-Wl,'
+ # All OSF/1 code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ rdos*)
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ solaris*)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95*)
+ lt_prog_compiler_wl='-Qoption ld ';;
+ *)
+ lt_prog_compiler_wl='-Wl,';;
+ esac
+ ;;
+
+ sunos4*)
+ lt_prog_compiler_wl='-Qoption ld '
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec ;then
+ lt_prog_compiler_pic='-Kconform_pic'
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ ;;
+
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ unicos*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_can_build_shared=no
+ ;;
+
+ uts4*)
+ lt_prog_compiler_pic='-pic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *)
+ lt_prog_compiler_can_build_shared=no
+ ;;
+ esac
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
-$as_echo "$ld_shlibs" >&6; }
-test "$ld_shlibs" = no && can_build_shared=no
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ lt_prog_compiler_pic=
+ ;;
+ *)
+ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+ ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
+$as_echo "$lt_prog_compiler_pic" >&6; }
-with_gnu_ld=$with_gnu_ld
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic_works=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_pic_works=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+ case $lt_prog_compiler_pic in
+ "" | " "*) ;;
+ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+ esac
+else
+ lt_prog_compiler_pic=
+ lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_static_works=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_static_works=yes
+ fi
+ else
+ lt_cv_prog_compiler_static_works=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+ :
+else
+ lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+ if test "$hard_links" = no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+ runpath_var=
+ allow_undefined_flag=
+ always_export_symbols=no
+ archive_cmds=
+ archive_expsym_cmds=
+ compiler_needs_object=no
+ enable_shared_with_static_runtimes=no
+ export_dynamic_flag_spec=
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ hardcode_automatic=no
+ hardcode_direct=no
+ hardcode_direct_absolute=no
+ hardcode_libdir_flag_spec=
+ hardcode_libdir_flag_spec_ld=
+ hardcode_libdir_separator=
+ hardcode_minus_L=no
+ hardcode_shlibpath_var=unsupported
+ inherit_rpath=no
+ link_all_deplibs=unknown
+ module_cmds=
+ module_expsym_cmds=
+ old_archive_from_new_cmds=
+ old_archive_from_expsyms_cmds=
+ thread_safe_flag_spec=
+ whole_archive_flag_spec=
+ # include_expsyms should be a list of space-separated symbols to be *always*
+ # included in the symbol list
+ include_expsyms=
+ # exclude_expsyms can be an extended regexp of symbols to exclude
+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+ # as well as any symbol that contains `d'.
+ exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+ # platforms (ab)use it in PIC code, but their linkers get confused if
+ # the symbol is explicitly referenced. Since portable code cannot
+ # rely on this symbol name, it's probably fine to never include it in
+ # preloaded symbol tables.
+ # Exclude shared library initialization/finalization symbols.
+ extract_expsyms_cmds=
+
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+ esac
+
+ ld_shlibs=yes
+
+ # On some targets, GNU ld is compatible enough with the native linker
+ # that we're better off using the native interface for both.
+ lt_use_gnu_ld_interface=no
+ if test "$with_gnu_ld" = yes; then
+ case $host_os in
+ aix*)
+ # The AIX port of GNU ld has always aspired to compatibility
+ # with the native linker. However, as the warning in the GNU ld
+ # block says, versions before 2.19.5* couldn't really create working
+ # shared libraries, regardless of the interface used.
+ case `$LD -v 2>&1` in
+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+ *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+ *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ fi
+
+ if test "$lt_use_gnu_ld_interface" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ export_dynamic_flag_spec='${wl}--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>&1` in
+ *GNU\ gold*) supports_anon_versioning=yes ;;
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix[3-9]*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds=''
+ ;;
+ m68k)
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+ # as there is no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ export_dynamic_flag_spec='${wl}--export-all-symbols'
+ allow_undefined_flag=unsupported
+ always_export_symbols=no
+ enable_shared_with_static_runtimes=yes
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ haiku*)
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ link_all_deplibs=yes
+ ;;
+
+ interix[3-9]*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu | uclinuxfdpiceabi)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group f77 and f90 compilers
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ lf95*) # Lahey Fortran 8.1
+ whole_archive_flag_spec=
+ tmp_sharedflag='--shared' ;;
+ xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
+ nvcc*) # Cuda Compiler Driver 2.2
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object=yes
+ ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
+ esac
+ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+
+ case $cc_basename in
+ xlf* | bgf* | bgxlf* | mpixlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+ hardcode_libdir_flag_spec=
+ hardcode_libdir_flag_spec_ld='-rpath $libdir'
+ archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris*)
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ ;;
+ *)
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ ;;
+
+ sunos4*)
+ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+
+ if test "$ld_shlibs" = no; then
+ runpath_var=
+ hardcode_libdir_flag_spec=
+ export_dynamic_flag_spec=
+ whole_archive_flag_spec=
+ fi
+ else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+
+ aix[4-9]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global
+ # defined symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ archive_cmds=''
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ file_list_spec='${wl}-f,'
+
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ ;;
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ export_dynamic_flag_spec='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ always_export_symbols=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ allow_undefined_flag='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ if test x$gcc_no_link = xyes; then
+ as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
+fi
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ allow_undefined_flag="-z nodefs"
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ if test x$gcc_no_link = xyes; then
+ as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
+fi
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ no_undefined_flag=' ${wl}-bernotok'
+ allow_undefined_flag=' ${wl}-berok'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec='$convenience'
+ fi
+ archive_cmds_need_lc=yes
+ # This is similar to how AIX traditionally builds its shared libraries.
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds=''
+ ;;
+ m68k)
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
+ ;;
+
+ bsdi[45]*)
+ export_dynamic_flag_spec=-rdynamic
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ old_archive_from_new_cmds='true'
+ # FIXME: Should let the user specify the lib program.
+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ fix_srcfile_path='`cygpath -w "$srcfile"`'
+ enable_shared_with_static_runtimes=yes
+ ;;
+
+ darwin* | rhapsody*)
+
+
+
+ # Publish an arg to allow the user to select that Darwin host (and target)
+ # libraries should be given install-names like @rpath/libfoo.dylib. This
+ # requires that the user of the library then adds an 'rpath' to the DSO that
+ # needs access.
+ # NOTE: there are defaults below, for systems that support rpaths. The person
+ # configuring can override the defaults for any system version that supports
+ # them - they are, however, forced off for system versions without support.
+ # Check whether --enable-darwin-at-rpath was given.
+if test "${enable_darwin_at_rpath+set}" = set; then :
+ enableval=$enable_darwin_at_rpath; if test "x$enable_darwin_at_rpath" = "xyes"; then
+ # This is not supported before macOS 10.5 / Darwin9.
+ case ${MACOSX_DEPLOYMENT_TARGET-UNSET},$host_os in
+ UNSET,darwin[4-8]*|UNSET,rhapsody*|10.[0-4][,.]*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Darwin @rpath library names are incompatible with OSX versions earlier than 10.5 (rpaths disabled)" >&5
+$as_echo "$as_me: WARNING: Darwin @rpath library names are incompatible with OSX versions earlier than 10.5 (rpaths disabled)" >&2;}
+ enable_darwin_at_rpath=no
+ ;;
+ esac
+ fi
+else
+ case ${MACOSX_DEPLOYMENT_TARGET-UNSET},$host_os in
+ # As above, before 10.5 / Darwin9 this does not work.
+ UNSET,darwin[4-8]*|UNSET,rhapsody*|10.[0-4][,.]*)
+ enable_darwin_at_rpath=no
+ ;;
+
+ # We cannot build and test reliably on macOS 10.11+ (Darwin15+) without use
+ # of rpaths, since runpaths set via DYLD_LIBRARY_PATH are elided by key
+ # system executables (e.g. /bin/sh). Force rpaths on for these systems.
+ UNSET,darwin1[5-9]*|UNSET,darwin2*|10.1[1-9][,.]*|1[1-9].*[,.]* )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: @rpath library names are needed on macOS versions later than 10.11 (rpaths have been enabled)" >&5
+$as_echo "$as_me: @rpath library names are needed on macOS versions later than 10.11 (rpaths have been enabled)" >&6;}
+ enable_darwin_at_rpath=yes
+ ;;
+ # NOTE: we are not (yet) doing anything for 10.5 .. 10.10, since they can
+ # work with either DYLD_LIBRARY_PATH or embedded rpaths.
+
+ esac
+
+fi
+
+
+ archive_cmds_need_lc=no
+ hardcode_direct=no
+ hardcode_automatic=yes
+ hardcode_shlibpath_var=unsupported
+ if test "$lt_cv_ld_force_load" = "yes"; then
+ whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ else
+ whole_archive_flag_spec=''
+ fi
+ link_all_deplibs=yes
+ allow_undefined_flag="$_lt_dar_allow_undefined"
+ case $cc_basename in
+ ifort*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+ output_verbose_link_cmd=func_echo_all
+ _lt_install_name='\$rpath/\$soname'
+ if test "x$enable_darwin_at_rpath" = "xyes"; then
+ _lt_install_name='@rpath/\$soname'
+ fi
+ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name ${_lt_install_name} \$verstring ${_lt_dsymutil}"
+ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name ${_lt_install_name} \$verstring ${_lt_dar_export_syms}${_lt_dsymutil}"
+ module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+ else
+ ld_shlibs=no
+ fi
+
+ ;;
+
+ dgux*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2.*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ hpux9*)
+ if test "$GCC" = yes; then
+ archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ export_dynamic_flag_spec='${wl}-E'
+ ;;
+
+ hpux10*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_flag_spec_ld='+b $libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ export_dynamic_flag_spec='${wl}-E'
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ fi
+ ;;
+
+ hpux11*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+
+ # Older versions of the 11.00 compiler do not understand -b yet
+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler__b=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -b"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler__b=yes
+ fi
+ else
+ lt_cv_prog_compiler__b=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+ ;;
+ esac
+ fi
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ ;;
+ *)
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ export_dynamic_flag_spec='${wl}-E'
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ esac
+ fi
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ if test x$gcc_no_link = xyes; then
+ as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
+fi
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int foo(void) {}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ inherit_rpath=yes
+ link_all_deplibs=yes
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ newsos6)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_shlibpath_var=no
+ ;;
+
+ *nto* | *qnx*)
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ hardcode_direct_absolute=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ else
+ case $host_os in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_separator=:
+ ;;
+
+ solaris*)
+ no_undefined_flag=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+ archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='${wl}'
+ archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_shlibpath_var=no
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test "$GCC" = yes; then
+ whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ else
+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+ fi
+ ;;
+ esac
+ link_all_deplibs=yes
+ ;;
+
+ sunos4*)
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4)
+ case $host_vendor in
+ sni)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ reload_cmds='$CC -r -o $output$reload_objs'
+ hardcode_direct=no
+ ;;
+ motorola)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4.3*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ export_dynamic_flag_spec='-Bexport'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ ld_shlibs=yes
+ fi
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ no_undefined_flag='${wl}-z,text'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ no_undefined_flag='${wl}-z,text'
+ allow_undefined_flag='${wl}-z,nodefs'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='${wl}-R,$libdir'
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ export_dynamic_flag_spec='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ uts4*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+
+ if test x$host_vendor = xsni; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ export_dynamic_flag_spec='${wl}-Blargedynsym'
+ ;;
+ esac
+ fi
+ fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+ # Assume -lc should be added
+ archive_cmds_need_lc=yes
+
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $archive_cmds in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$lt_prog_compiler_wl
+ pic_flag=$lt_prog_compiler_pic
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$allow_undefined_flag
+ allow_undefined_flag=
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+ (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ then
+ lt_cv_archive_cmds_need_lc=no
+ else
+ lt_cv_archive_cmds_need_lc=yes
+ fi
+ allow_undefined_flag=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+ archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test "$GCC" = yes; then
+ case $host_os in
+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+ *) lt_awk_arg="/^libraries:/" ;;
+ esac
+ case $host_os in
+ mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+ *) lt_sed_strip_eq="s,=/,/,g" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+ case $lt_search_path_spec in
+ *\;*)
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+ ;;
+ *)
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ esac
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary.
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+ else
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+ lt_foo="";
+ lt_count=0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo="/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[lt_foo]++; }
+ if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+ # AWK program above erroneously prepends '/' to C:/dos/paths
+ # for these hosts.
+ case $host_os in
+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+ $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+ esac
+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+
+aix[4-9]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[01] | aix4.[01].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+
+beos*)
+ library_names_spec='${libname}${shared_ext}'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[45]*)
+ version_type=linux
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
+
+ case $GCC,$host_os in
+ yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
+ ;;
+
+ *)
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[23].*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2.*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[01]* | freebsdelf3.[01]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+haiku*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ if test "X$HPUX_IA64_MODE" = X32; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ fi
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+ postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
+ ;;
+
+interix[3-9]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ version_type=linux
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+# This must be Linux ELF.
+
+# uclinux* changes (here and below) have been submitted to the libtool
+# project, but have not yet been accepted: they are GCC-local changes
+# for the time being. (See
+# https://lists.gnu.org/archive/html/libtool-patches/2018-05/msg00000.html)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu* | uclinuxfdpiceabi)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+
+ # Some binutils ld are patched to set DT_RUNPATH
+ if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+ if test x$gcc_no_link = xyes; then
+ as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
+fi
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+ lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+
+fi
+
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec="/usr/lib"
+ need_lib_prefix=no
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case $host_os in
+ openbsd2.[89] | openbsd2.[89].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ ;;
+
+os2*)
+ libname_spec='$name'
+ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux
+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+ soname_spec='$libname${shared_ext}.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=freebsd-elf
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test "$with_gnu_ld" = yes; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+# Shared libraries for VwWorks, >= 7 only at this stage
+# and (fpic) still incompatible with "large" code models
+# in a few configurations. Only for RTP mode in any case,
+# and upon explicit request at configure time.
+vxworks7*)
+ dynamic_linker=no
+ case ${with_multisubdir}-${enable_shared} in
+ *large*)
+ ;;
+ *mrtp*-yes)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker="$host_os module_loader"
+ ;;
+ esac
+ ;;
+*)
+ dynamic_linker=no
+ ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+ test -n "$runpath_var" ||
+ test "X$hardcode_automatic" = "Xyes" ; then
+
+ # We can hardcode non-existent directories.
+ if test "$hardcode_direct" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+ test "$hardcode_minus_L" != no; then
+ # Linking always hardcodes the temporary library directory.
+ hardcode_action=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ hardcode_action=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test "$hardcode_action" = relink ||
+ test "$inherit_rpath" = yes; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+
+
+
+
+
+
+ if test "x$enable_dlopen" != xyes; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
+
+ case $host_os in
+ beos*)
+ lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+ mingw* | pw32* | cegcc*)
+ lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen_libs=
+ ;;
+
+ cygwin*)
+ lt_cv_dlopen="dlopen"
+ lt_cv_dlopen_libs=
+ ;;
+
+ darwin*)
+ # if libdl is installed we need to link against it
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+if test x$gcc_no_link = xyes; then
+ as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
+fi
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dl_dlopen=yes
+else
+ ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+ lt_cv_dlopen="dyld"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+
+fi
+
+ ;;
+
+ *)
+ ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+ lt_cv_dlopen="shl_load"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+if test x$gcc_no_link = xyes; then
+ as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
+fi
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dld_shl_load=yes
+else
+ ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+ ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+if test x$gcc_no_link = xyes; then
+ as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
+fi
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dl_dlopen=yes
+else
+ ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld $LIBS"
+if test x$gcc_no_link = xyes; then
+ as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
+fi
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_svld_dlopen=yes
+else
+ ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+if test x$gcc_no_link = xyes; then
+ as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
+fi
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dld_dld_link=yes
+else
+ ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
+
+
+fi
+
+
+fi
+
+fi
+fi
+fi
+ ;;
+ esac
+ if test "x$lt_cv_dlopen" != xno; then
+ enable_dlopen=yes
+ else
+ enable_dlopen=no
+ fi
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS="$CPPFLAGS"
+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+ save_LDFLAGS="$LDFLAGS"
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc" in
-x|xyes)
- # Assume -lc should be added
- archive_cmds_need_lc=yes
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
- if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $archive_cmds in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
-if ${lt_cv_archive_cmds_need_lc+:} false; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self+:} false; then :
$as_echo_n "(cached) " >&6
else
- $RM conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+#line 12640 "configure"
+#include "confdefs.h"
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$lt_prog_compiler_wl
- pic_flag=$lt_prog_compiler_pic
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$allow_undefined_flag
- allow_undefined_flag=
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
- (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+void fnord () __attribute__((visibility("default")));
+#endif
+
+void fnord () { int i=42; }
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}
+_LT_EOF
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
- then
- lt_cv_archive_cmds_need_lc=no
- else
- lt_cv_archive_cmds_need_lc=yes
- fi
- allow_undefined_flag=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $RM conftest*
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
-$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
- archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
- ;;
+ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self=no
fi
- ;;
-esac
+fi
+rm -fr conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+ if test "x$lt_cv_dlopen_self" = xyes; then
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self_static+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self_static=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+#line 12746 "configure"
+#include "confdefs.h"
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+#include <stdio.h>
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+void fnord () __attribute__((visibility("default")));
+#endif
+void fnord () { int i=42; }
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+ return status;
+}
+_LT_EOF
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self_static=no
+ fi
+fi
+rm -fr conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+ fi
+ CPPFLAGS="$save_CPPFLAGS"
+ LDFLAGS="$save_LDFLAGS"
+ LIBS="$save_LIBS"
+ ;;
+ esac
+ case $lt_cv_dlopen_self in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+ case $lt_cv_dlopen_self_static in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
@@ -9599,6 +12870,35 @@ esac
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+ darwin*)
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fi
+ ;;
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ ;;
+ esac
+fi
@@ -9611,51 +12911,423 @@ esac
+ # Report which library types will actually be built
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+ test "$can_build_shared" = "no" && enable_shared=no
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[4-9]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+CC="$lt_save_CC"
+ if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+ (test "X$CXX" != "Xg++"))) ; then
+ ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5
+$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
+if test -z "$CXXCPP"; then
+ if ${ac_cv_prog_CXXCPP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CXXCPP needs to be expanded
+ for CXXCPP in "$CXX -E" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+ break
+fi
+ done
+ ac_cv_prog_CXXCPP=$CXXCPP
+fi
+ CXXCPP=$ac_cv_prog_CXXCPP
+else
+ ac_cv_prog_CXXCPP=$CXXCPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5
+$as_echo "$CXXCPP" >&6; }
+ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+else
+ _lt_caught_CXX_error=yes
+fi
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+archive_cmds_need_lc_CXX=no
+allow_undefined_flag_CXX=
+always_export_symbols_CXX=no
+archive_expsym_cmds_CXX=
+compiler_needs_object_CXX=no
+export_dynamic_flag_spec_CXX=
+hardcode_direct_CXX=no
+hardcode_direct_absolute_CXX=no
+hardcode_libdir_flag_spec_CXX=
+hardcode_libdir_flag_spec_ld_CXX=
+hardcode_libdir_separator_CXX=
+hardcode_minus_L_CXX=no
+hardcode_shlibpath_var_CXX=unsupported
+hardcode_automatic_CXX=no
+inherit_rpath_CXX=no
+module_cmds_CXX=
+module_expsym_cmds_CXX=
+link_all_deplibs_CXX=unknown
+old_archive_cmds_CXX=$old_archive_cmds
+reload_flag_CXX=$reload_flag
+reload_cmds_CXX=$reload_cmds
+no_undefined_flag_CXX=
+whole_archive_flag_spec_CXX=
+enable_shared_with_static_runtimes_CXX=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+objext_CXX=$objext
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="int some_variable = 0;"
+ # Code to be used in simple link tests
+ lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+# Allow CC to be a program name with arguments.
+compiler=$CC
+ # save warnings/boilerplate of simple test code
+ ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+ ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
+ lt_save_LD=$LD
+ lt_save_GCC=$GCC
+ GCC=$GXX
+ lt_save_with_gnu_ld=$with_gnu_ld
+ lt_save_path_LD=$lt_cv_path_LD
+ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+ else
+ $as_unset lt_cv_prog_gnu_ld
+ fi
+ if test -n "${lt_cv_path_LDCXX+set}"; then
+ lt_cv_path_LD=$lt_cv_path_LDCXX
+ else
+ $as_unset lt_cv_path_LD
+ fi
+ test -z "${LDCXX+set}" || LD=$LDCXX
+ CC=${CXX-"c++"}
+ compiler=$CC
+ compiler_CXX=$CC
+ for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+ if test -n "$compiler"; then
+ # We don't want -fno-exception when compiling C++ code, so set the
+ # no_builtin_flag separately
+ if test "$GXX" = yes; then
+ lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
+ else
+ lt_prog_compiler_no_builtin_flag_CXX=
+ fi
+ if test "$GXX" = yes; then
+ # Set up default GNU C++ configuration
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | ?:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
+ ;;
+ *)
+ test "$with_gnu_ld" != yes && break
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
@@ -9663,784 +13335,1918 @@ esac
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test "$with_gnu_ld" = yes; then
+ archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+ # investigate it a little bit more. (MM)
+ wlarc='${wl}'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+ $GREP 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec_CXX=
+ fi
+ else
+ with_gnu_ld=no
+ wlarc=
+
+ # A generic and very simple default shared library creation
+ # command for GNU C++ for the case where it uses the native
+ # linker, instead of GNU ld. If possible, this setting should
+ # overridden to take advantage of the native linker features on
+ # the platform it is being used on.
+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ fi
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ else
+ GXX=no
+ with_gnu_ld=no
+ wlarc=
+ fi
+ # PORTME: fill in a description of your system's C++ link characteristics
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+ ld_shlibs_CXX=yes
+ case $host_os in
+ aix3*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ aix[4-9]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+ for ld_flag in $LDFLAGS; do
+ case $ld_flag in
+ *-brtl*)
+ aix_use_runtimelinking=yes
+ break
+ ;;
+ esac
+ done
+ ;;
+ esac
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ archive_cmds_CXX=''
+ hardcode_direct_CXX=yes
+ hardcode_direct_absolute_CXX=yes
+ hardcode_libdir_separator_CXX=':'
+ link_all_deplibs_CXX=yes
+ file_list_spec_CXX='${wl}-f,'
+
+ if test "$GXX" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ hardcode_direct_CXX=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L_CXX=yes
+ hardcode_libdir_flag_spec_CXX='-L$libdir'
+ hardcode_libdir_separator_CXX=
+ fi
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+ export_dynamic_flag_spec_CXX='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to
+ # export.
+ always_export_symbols_CXX=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ allow_undefined_flag_CXX='-berok'
+ # Determine the default libpath from the value encoded in an empty
+ # executable.
+ if test x$gcc_no_link = xyes; then
+ as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
+fi
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int
+main ()
+{
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+ archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
+ allow_undefined_flag_CXX="-z nodefs"
+ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ if test x$gcc_no_link = xyes; then
+ as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
+fi
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int
+main ()
+{
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ no_undefined_flag_CXX=' ${wl}-bernotok'
+ allow_undefined_flag_CXX=' ${wl}-berok'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec_CXX='$convenience'
+ fi
+ archive_cmds_need_lc_CXX=yes
+ # This is similar to how AIX traditionally builds its shared
+ # libraries.
+ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag_CXX=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ chorus*)
+ case $cc_basename in
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
+ # as there is no search path for DLLs.
+ hardcode_libdir_flag_spec_CXX='-L$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-all-symbols'
+ allow_undefined_flag_CXX=unsupported
+ always_export_symbols_CXX=no
+ enable_shared_with_static_runtimes_CXX=yes
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ darwin* | rhapsody*)
+ # Publish an arg to allow the user to select that Darwin host (and target)
+ # libraries should be given install-names like @rpath/libfoo.dylib. This
+ # requires that the user of the library then adds an 'rpath' to the DSO that
+ # needs access.
+ # NOTE: there are defaults below, for systems that support rpaths. The person
+ # configuring can override the defaults for any system version that supports
+ # them - they are, however, forced off for system versions without support.
+ # Check whether --enable-darwin-at-rpath was given.
+if test "${enable_darwin_at_rpath+set}" = set; then :
+ enableval=$enable_darwin_at_rpath; if test "x$enable_darwin_at_rpath" = "xyes"; then
+ # This is not supported before macOS 10.5 / Darwin9.
+ case ${MACOSX_DEPLOYMENT_TARGET-UNSET},$host_os in
+ UNSET,darwin[4-8]*|UNSET,rhapsody*|10.[0-4][,.]*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Darwin @rpath library names are incompatible with OSX versions earlier than 10.5 (rpaths disabled)" >&5
+$as_echo "$as_me: WARNING: Darwin @rpath library names are incompatible with OSX versions earlier than 10.5 (rpaths disabled)" >&2;}
+ enable_darwin_at_rpath=no
+ ;;
+ esac
+ fi
+else
+ case ${MACOSX_DEPLOYMENT_TARGET-UNSET},$host_os in
+ # As above, before 10.5 / Darwin9 this does not work.
+ UNSET,darwin[4-8]*|UNSET,rhapsody*|10.[0-4][,.]*)
+ enable_darwin_at_rpath=no
+ ;;
+ # We cannot build and test reliably on macOS 10.11+ (Darwin15+) without use
+ # of rpaths, since runpaths set via DYLD_LIBRARY_PATH are elided by key
+ # system executables (e.g. /bin/sh). Force rpaths on for these systems.
+ UNSET,darwin1[5-9]*|UNSET,darwin2*|10.1[1-9][,.]*|1[1-9].*[,.]* )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: @rpath library names are needed on macOS versions later than 10.11 (rpaths have been enabled)" >&5
+$as_echo "$as_me: @rpath library names are needed on macOS versions later than 10.11 (rpaths have been enabled)" >&6;}
+ enable_darwin_at_rpath=yes
+ ;;
+ # NOTE: we are not (yet) doing anything for 10.5 .. 10.10, since they can
+ # work with either DYLD_LIBRARY_PATH or embedded rpaths.
+ esac
+fi
+ archive_cmds_need_lc_CXX=no
+ hardcode_direct_CXX=no
+ hardcode_automatic_CXX=yes
+ hardcode_shlibpath_var_CXX=unsupported
+ if test "$lt_cv_ld_force_load" = "yes"; then
+ whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ else
+ whole_archive_flag_spec_CXX=''
+ fi
+ link_all_deplibs_CXX=yes
+ allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
+ case $cc_basename in
+ ifort*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+ output_verbose_link_cmd=func_echo_all
+ _lt_install_name='\$rpath/\$soname'
+ if test "x$enable_darwin_at_rpath" = "xyes"; then
+ _lt_install_name='@rpath/\$soname'
+ fi
+ archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name ${_lt_install_name} \$verstring ${_lt_dsymutil}"
+ module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name ${_lt_install_name} \$verstring ${_lt_dar_export_syms}${_lt_dsymutil}"
+ module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+ _lt_install_name='\$rpath/\$soname'
+ if test "x$enable_darwin_at_rpath" = "xyes"; then
+ _lt_install_name='@rpath/\$soname'
+ fi
+ archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name ${_lt_install_name} \$verstring${_lt_dsymutil}"
+ archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+ fi
+ else
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+ freebsd2.*)
+ # C++ shared libraries reported to be fairly broken before
+ # switch to ELF
+ ld_shlibs_CXX=no
+ ;;
+ freebsd-elf*)
+ archive_cmds_need_lc_CXX=no
+ ;;
+ freebsd* | dragonfly*)
+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+ # conventions
+ ld_shlibs_CXX=yes
+ ;;
+ gnu*)
+ ;;
+ haiku*)
+ archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ link_all_deplibs_CXX=yes
+ ;;
+ hpux9*)
+ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator_CXX=:
+ export_dynamic_flag_spec_CXX='${wl}-E'
+ hardcode_direct_CXX=yes
+ hardcode_minus_L_CXX=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ aCC*)
+ archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ esac
+ ;;
+ hpux10*|hpux11*)
+ if test $with_gnu_ld = no; then
+ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator_CXX=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ ;;
+ *)
+ export_dynamic_flag_spec_CXX='${wl}-E'
+ ;;
+ esac
+ fi
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct_CXX=no
+ hardcode_shlibpath_var_CXX=no
+ ;;
+ *)
+ hardcode_direct_CXX=yes
+ hardcode_direct_absolute_CXX=yes
+ hardcode_minus_L_CXX=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+ ;;
+ esac
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ aCC*)
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test $with_gnu_ld = no; then
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+ else
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ esac
+ ;;
+ interix[3-9]*)
+ hardcode_direct_CXX=no
+ hardcode_shlibpath_var_CXX=no
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec_CXX='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+ irix5* | irix6*)
+ case $cc_basename in
+ CC*)
+ # SGI C++
+ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test "$with_gnu_ld" = no; then
+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+ fi
+ fi
+ link_all_deplibs_CXX=yes
+ ;;
+ esac
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator_CXX=:
+ inherit_rpath_CXX=yes
+ ;;
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+
+ # Archives containing C++ object files must be created using
+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+ old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
+ ;;
+ icpc* | ecpc* )
+ # Intel C++
+ with_gnu_ld=yes
+ # version 8.0 and above of icpc choke on multiply defined symbols
+ # if we add $predep_objects and $postdep_objects, however 7.1 and
+ # earlier do not add the objects themselves.
+ case `$CC -V 2>&1` in
+ *"Version 7."*)
+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ *) # Version 8.0 or newer
+ tmp_idyn=
+ case $host_cpu in
+ ia64*) tmp_idyn=' -i_dynamic';;
+ esac
+ archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ esac
+ archive_cmds_need_lc_CXX=no
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+ whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ case `$CC -V` in
+ *pgCC\ [1-5].* | *pgcpp\ [1-5].*)
+ prelink_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ old_archive_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
+ archive_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ archive_expsym_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ *) # Version 6 and above use weak symbols
+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ esac
+ hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+ whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ ;;
+ cxx*)
+ # Compaq C++
+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+ hardcode_libdir_separator_CXX=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+ ;;
+ xl* | mpixl* | bgxl*)
+ # IBM XL 8.0 on PPC, with GNU ld
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+ archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ no_undefined_flag_CXX=' -zdefs'
+ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ hardcode_libdir_flag_spec_CXX='-R$libdir'
+ whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object_CXX=yes
+
+ # Not sure whether something based on
+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+ # would be better.
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ lynxos*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ m88k*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+ wlarc=
+ hardcode_libdir_flag_spec_CXX='-R$libdir'
+ hardcode_direct_CXX=yes
+ hardcode_shlibpath_var_CXX=no
+ fi
+ # Workaround some broken pre-1.5 toolchains
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+ ;;
+ *nto* | *qnx*)
+ ld_shlibs_CXX=yes
+ ;;
+ openbsd2*)
+ # C++ shared libraries are fairly broken
+ ld_shlibs_CXX=no
+ ;;
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct_CXX=yes
+ hardcode_shlibpath_var_CXX=no
+ hardcode_direct_absolute_CXX=yes
+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+ export_dynamic_flag_spec_CXX='${wl}-E'
+ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ fi
+ output_verbose_link_cmd=func_echo_all
+ else
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ hardcode_libdir_separator_CXX=:
+ # Archives containing C++ object files must be created using
+ # the KAI C++ compiler.
+ case $host in
+ osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;;
+ *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;;
+ esac
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ cxx*)
+ case $host in
+ osf3*)
+ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ ;;
+ *)
+ allow_undefined_flag_CXX=' -expect_unresolved \*'
+ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
+ $RM $lib.exp'
+ hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+ ;;
+ esac
+ hardcode_libdir_separator_CXX=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+ case $host in
+ osf3*)
+ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ esac
+
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator_CXX=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ esac
+ ;;
+ psos*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ lcc*)
+ # Lucid
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+ solaris*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ archive_cmds_need_lc_CXX=yes
+ no_undefined_flag_CXX=' -zdefs'
+ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ hardcode_libdir_flag_spec_CXX='-R$libdir'
+ hardcode_shlibpath_var_CXX=no
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
+ ;;
+ esac
+ link_all_deplibs_CXX=yes
+ output_verbose_link_cmd='func_echo_all'
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ # The C++ compiler must be used to create the archive.
+ old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+ ;;
+ *)
+ # GNU C++ compiler with Solaris linker
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+ archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ else
+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # platform.
+ archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ fi
+
+ hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ ;;
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ no_undefined_flag_CXX='${wl}-z,text'
+ archive_cmds_need_lc_CXX=no
+ hardcode_shlibpath_var_CXX=no
+ runpath_var='LD_RUN_PATH'
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
-$as_echo_n "checking dynamic linker characteristics... " >&6; }
+ case $cc_basename in
+ CC*)
+ archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
-if test "$GCC" = yes; then
- case $host_os in
- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
- *) lt_awk_arg="/^libraries:/" ;;
- esac
- case $host_os in
- mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
- *) lt_sed_strip_eq="s,=/,/,g" ;;
- esac
- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
- case $lt_search_path_spec in
- *\;*)
- # if the path contains ";" then we assume it to be the separator
- # otherwise default to the standard path separator (i.e. ":") - it is
- # assumed that no part of a normal pathname contains ";" but that should
- # okay in the real world where ";" in dirpaths is itself problematic.
- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
- ;;
- *)
- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
- ;;
- esac
- # Ok, now we have the path, separated by spaces, we can step through it
- # and add multilib dir if necessary.
- lt_tmp_lt_search_path_spec=
- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
- for lt_sys_path in $lt_search_path_spec; do
- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
- else
- test -d "$lt_sys_path" && \
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
- fi
- done
- lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
-BEGIN {RS=" "; FS="/|\n";} {
- lt_foo="";
- lt_count=0;
- for (lt_i = NF; lt_i > 0; lt_i--) {
- if ($lt_i != "" && $lt_i != ".") {
- if ($lt_i == "..") {
- lt_count++;
- } else {
- if (lt_count == 0) {
- lt_foo="/" $lt_i lt_foo;
- } else {
- lt_count--;
- }
- }
- }
- }
- if (lt_foo != "") { lt_freq[lt_foo]++; }
- if (lt_freq[lt_foo] == 1) { print lt_foo; }
-}'`
- # AWK program above erroneously prepends '/' to C:/dos/paths
- # for these hosts.
- case $host_os in
- mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
- $SED 's,/\([A-Za-z]:\),\1,g'` ;;
- esac
- sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
-else
- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-need_lib_prefix=unknown
-hardcode_into_libs=no
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ no_undefined_flag_CXX='${wl}-z,text'
+ allow_undefined_flag_CXX='${wl}-z,nodefs'
+ archive_cmds_need_lc_CXX=no
+ hardcode_shlibpath_var_CXX=no
+ hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir'
+ hardcode_libdir_separator_CXX=':'
+ link_all_deplibs_CXX=yes
+ export_dynamic_flag_spec_CXX='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
+ case $cc_basename in
+ CC*)
+ archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~
+ '"$old_archive_cmds_CXX"
+ reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~
+ '"$reload_cmds_CXX"
+ ;;
+ *)
+ archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
-case $host_os in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
- shlibpath_var=LIBPATH
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
+ vxworks*)
+ # For VxWorks ports, we assume the use of a GNU linker with
+ # standard elf conventions.
+ ld_shlibs_CXX=yes
+ ;;
-aix[4-9]*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[01] | aix4.[01].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
- :
- else
- can_build_shared=no
- fi
- ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
- shlibpath_var=LIBPATH
- fi
- ;;
-
-amigaos*)
- case $host_cpu in
- powerpc)
- # Since July 2007 AmigaOS4 officially supports .so libraries.
- # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- ;;
- m68k)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- ;;
- esac
- ;;
-
-beos*)
- library_names_spec='${libname}${shared_ext}'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
-bsdi[45]*)
- version_type=linux
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+$as_echo "$ld_shlibs_CXX" >&6; }
+ test "$ld_shlibs_CXX" = no && can_build_shared=no
+
+ GCC_CXX="$GXX"
+ LD_CXX="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ # Dependencies to place before and after the object being linked:
+predep_objects_CXX=
+postdep_objects_CXX=
+predeps_CXX=
+postdeps_CXX=
+compiler_lib_search_path_CXX=
+
+cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+ Foo (void) { a = 0; }
+private:
+ int a;
+};
+_LT_EOF
-cygwin* | mingw* | pw32* | cegcc*)
- version_type=windows
- shrext_cmds=".dll"
- need_version=no
- need_lib_prefix=no
+if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ # Parse the compiler output and extract the necessary
+ # objects, libraries and library flags.
+
+ # Sentinel used to keep track of whether or not we are before
+ # the conftest object file.
+ pre_test_object_deps_done=no
+
+ for p in `eval "$output_verbose_link_cmd"`; do
+ case $p in
+
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+ # Remove the space.
+ if test $p = "-L" ||
+ test $p = "-R"; then
+ prev=$p
+ continue
+ else
+ prev=
+ fi
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname~
- if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
- eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
- fi'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $RM \$dlpath'
- shlibpath_overrides_runpath=yes
+ if test "$pre_test_object_deps_done" = no; then
+ case $p in
+ -L* | -R*)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+ if test -z "$compiler_lib_search_path_CXX"; then
+ compiler_lib_search_path_CXX="${prev}${p}"
+ else
+ compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
+ fi
+ ;;
+ # The "-l" case would never come before the object being
+ # linked, so don't bother handling this case.
+ esac
+ else
+ if test -z "$postdeps_CXX"; then
+ postdeps_CXX="${prev}${p}"
+ else
+ postdeps_CXX="${postdeps_CXX} ${prev}${p}"
+ fi
+ fi
+ ;;
- case $host_os in
- cygwin*)
- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+ if test "$p" = "conftest.$objext"; then
+ pre_test_object_deps_done=yes
+ continue
+ fi
- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
- ;;
- mingw* | cegcc*)
- # MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- ;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ if test "$pre_test_object_deps_done" = no; then
+ if test -z "$predep_objects_CXX"; then
+ predep_objects_CXX="$p"
+ else
+ predep_objects_CXX="$predep_objects_CXX $p"
+ fi
+ else
+ if test -z "$postdep_objects_CXX"; then
+ postdep_objects_CXX="$p"
+ else
+ postdep_objects_CXX="$postdep_objects_CXX $p"
+ fi
+ fi
+ ;;
+
+ *) ;; # Ignore the rest.
+
+ esac
+ done
+
+ # Clean up.
+ rm -f a.out a.exe
+else
+ echo "libtool.m4: error: problem compiling CXX test program"
+fi
+
+$RM -f confest.$objext
+
+# PORTME: override above test on systems where it is broken
+case $host_os in
+interix[3-9]*)
+ # Interix 3.5 installs completely hosed .la files for C++, so rather than
+ # hack all around it, let's just trust "g++" to DTRT.
+ predep_objects_CXX=
+ postdep_objects_CXX=
+ postdeps_CXX=
+ ;;
+
+linux*)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
;;
esac
- ;;
- *)
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ if test "$solaris_use_stlport4" != yes; then
+ postdeps_CXX='-library=Cstd -library=Crun'
+ fi
;;
esac
- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
;;
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+solaris*)
+ case $cc_basename in
+ CC*)
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ # Adding this requires a known-good setup of shared libraries for
+ # Sun compiler versions before 5.6, else PIC objects from an old
+ # archive will be linked into the output, leading to subtle bugs.
+ if test "$solaris_use_stlport4" != yes; then
+ postdeps_CXX='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
;;
+esac
-dgux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-freebsd* | dragonfly*)
- # DragonFly does not have aout. When/if they implement a new
- # versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
+case " $postdeps_CXX " in
+*" -lc "*) archive_cmds_need_lc_CXX=no ;;
+esac
+ compiler_lib_search_dirs_CXX=
+if test -n "${compiler_lib_search_path_CXX}"; then
+ compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ lt_prog_compiler_wl_CXX=
+lt_prog_compiler_pic_CXX=
+lt_prog_compiler_static_CXX=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+
+ # C++ specific cases for pic, static, wl, etc.
+ if test "$GXX" = yes; then
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_static_CXX='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static_CXX='-Bstatic'
+ fi
+ lt_prog_compiler_pic_CXX='-fPIC'
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ lt_prog_compiler_pic_CXX='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+ ;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic_CXX='-fno-common'
+ ;;
+ *djgpp*)
+ # DJGPP does not support shared libraries at all
+ lt_prog_compiler_pic_CXX=
+ ;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ lt_prog_compiler_static_CXX=
+ ;;
+ interix[3-9]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ lt_prog_compiler_pic_CXX=-Kconform_pic
+ fi
+ ;;
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ ;;
+ *)
+ lt_prog_compiler_pic_CXX='-fPIC'
+ ;;
+ esac
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic_CXX='-fPIC -shared'
+ ;;
+ *)
+ lt_prog_compiler_pic_CXX='-fPIC'
+ ;;
+ esac
else
case $host_os in
- freebsd[23].*) objformat=aout ;;
- *) objformat=elf ;;
+ aix[4-9]*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static_CXX='-Bstatic'
+ else
+ lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+ chorus*)
+ case $cc_basename in
+ cxch68*)
+ # Green Hills C++ Compiler
+ # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+ ;;
+ esac
+ ;;
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ lt_prog_compiler_pic_CXX='-KPIC'
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ lt_prog_compiler_pic_CXX='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ freebsd* | dragonfly*)
+ # FreeBSD uses GNU C++
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case $cc_basename in
+ CC*)
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+ if test "$host_cpu" != ia64; then
+ lt_prog_compiler_pic_CXX='+Z'
+ fi
+ ;;
+ aCC*)
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic_CXX='+Z'
+ ;;
+ esac
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ interix*)
+ # This is c89, which is MS Visual C++ (no shared libs)
+ # Anyone wants to do a port?
+ ;;
+ irix5* | irix6* | nonstopux*)
+ case $cc_basename in
+ CC*)
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_static_CXX='-non_shared'
+ # CC pic flag -KPIC is the default.
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ KCC*)
+ # KAI C++ Compiler
+ lt_prog_compiler_wl_CXX='--backend -Wl,'
+ lt_prog_compiler_pic_CXX='-fPIC'
+ ;;
+ ecpc* )
+ # old Intel C++ for x86_64 which still supported -KPIC.
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-KPIC'
+ lt_prog_compiler_static_CXX='-static'
+ ;;
+ icpc* )
+ # Intel C++, used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-fPIC'
+ lt_prog_compiler_static_CXX='-static'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-fpic'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ ;;
+ cxx*)
+ # Compaq C++
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ lt_prog_compiler_pic_CXX=
+ lt_prog_compiler_static_CXX='-non_shared'
+ ;;
+ xlc* | xlC* | bgxl[cC]* | mpixl[cC]*)
+ # IBM XL 8.0, 9.0 on PPC and BlueGene
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-qpic'
+ lt_prog_compiler_static_CXX='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ lt_prog_compiler_pic_CXX='-KPIC'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ lt_prog_compiler_wl_CXX='-Qoption ld '
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ lynxos*)
+ ;;
+ m88k*)
+ ;;
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ lt_prog_compiler_pic_CXX='-W c,exportall'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ netbsd*)
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic_CXX='-fPIC -shared'
+ ;;
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ lt_prog_compiler_wl_CXX='--backend -Wl,'
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ lt_prog_compiler_pic_CXX='-pic'
+ ;;
+ cxx*)
+ # Digital/Compaq C++
+ lt_prog_compiler_wl_CXX='-Wl,'
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ lt_prog_compiler_pic_CXX=
+ lt_prog_compiler_static_CXX='-non_shared'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ psos*)
+ ;;
+ solaris*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ lt_prog_compiler_pic_CXX='-KPIC'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ lt_prog_compiler_wl_CXX='-Qoption ld '
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ lt_prog_compiler_pic_CXX='-PIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ lt_prog_compiler_pic_CXX='-pic'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ ;;
+ lcc*)
+ # Lucid
+ lt_prog_compiler_pic_CXX='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ case $cc_basename in
+ CC*)
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-KPIC'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ ;;
+ esac
+ ;;
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ lt_prog_compiler_pic_CXX='-KPIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ vxworks*)
+ ;;
+ *)
+ lt_prog_compiler_can_build_shared_CXX=no
+ ;;
esac
fi
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2.*)
- shlibpath_overrides_runpath=yes
- ;;
- freebsd3.[01]* | freebsdelf3.[01]*)
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
- freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- *) # from 4.6 on, and DragonFly
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-haiku*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- dynamic_linker="$host_os runtime_loader"
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
- hardcode_into_libs=yes
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- case $host_cpu in
- ia64*)
- shrext_cmds='.so'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.so"
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
- else
- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
- fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
- shrext_cmds='.sl'
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
- esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
- postinstall_cmds='chmod 555 $lib'
- # or fails outright, so override atomically:
- install_override_mode=555
- ;;
-
-interix[3-9]*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux
- else
- version_type=irix
- fi ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ lt_prog_compiler_pic_CXX=
;;
*)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
- libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
- libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
- libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
+ lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- hardcode_into_libs=yes
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
- dynamic_linker=no
- ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic_CXX" >&5
+$as_echo "$lt_prog_compiler_pic_CXX" >&6; }
-# This must be Linux ELF.
-# uclinux* changes (here and below) have been submitted to the libtool
-# project, but have not yet been accepted: they are GCC-local changes
-# for the time being. (See
-# https://lists.gnu.org/archive/html/libtool-patches/2018-05/msg00000.html)
-linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu* | uclinuxfdpiceabi)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- # Some binutils ld are patched to set DT_RUNPATH
- if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_CXX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works_CXX+:} false; then :
$as_echo_n "(cached) " >&6
else
- lt_cv_shlibpath_overrides_runpath=no
- save_LDFLAGS=$LDFLAGS
- save_libdir=$libdir
- eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
- LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
- if test x$gcc_no_link = xyes; then
- as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
-fi
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
+ lt_cv_prog_compiler_pic_works_CXX=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_pic_works_CXX=yes
+ fi
+ fi
+ $RM conftest*
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
- lt_cv_shlibpath_overrides_runpath=yes
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
+ case $lt_prog_compiler_pic_CXX in
+ "" | " "*) ;;
+ *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
+ esac
+else
+ lt_prog_compiler_pic_CXX=
+ lt_prog_compiler_can_build_shared_CXX=no
fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- LDFLAGS=$save_LDFLAGS
- libdir=$save_libdir
fi
- shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_static_works_CXX=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_static_works_CXX=yes
+ fi
+ else
+ lt_cv_prog_compiler_static_works_CXX=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; }
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
+if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
+ :
+else
+ lt_prog_compiler_static_CXX=
+fi
-newsos6)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-*nto* | *qnx*)
- version_type=qnx
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='ldqnx.so'
- ;;
-openbsd*)
- version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
- need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[89] | openbsd2.[89].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
- ;;
-os2*)
- libname_spec='$name'
- shrext_cmds=".dll"
- need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o_CXX=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-osf3* | osf4* | osf5*)
- version_type=osf
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o_CXX=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
-rdos*)
- dynamic_linker=no
- ;;
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-sysv4 | sysv4.3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o_CXX=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o_CXX=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
- ;;
- esac
- fi
- sys_lib_dlsearch_path_spec='/usr/lib'
- ;;
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
-tpf*)
- # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-# Shared libraries for VwWorks, >= 7 only at this stage
-# and (fpic) still incompatible with "large" code models
-# in a few configurations. Only for RTP mode in any case,
-# and upon explicit request at configure time.
-vxworks7*)
- dynamic_linker=no
- case ${with_multisubdir}-${enable_shared} in
- *large*)
- ;;
- *mrtp*-yes)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker="$host_os module_loader"
- ;;
- esac
- ;;
-*)
- dynamic_linker=no
- ;;
-esac
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
-$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+ if test "$hard_links" = no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+else
+ need_locks=no
fi
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
- sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
- sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ case $host_os in
+ aix[4-9]*)
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global defined
+ # symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ ;;
+ pw32*)
+ export_symbols_cmds_CXX="$ltdll_cmds"
+ ;;
+ cygwin* | mingw* | cegcc*)
+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
+ *)
+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
+ esac
+ exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+$as_echo "$ld_shlibs_CXX" >&6; }
+test "$ld_shlibs_CXX" = no && can_build_shared=no
+with_gnu_ld_CXX=$with_gnu_ld
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_CXX" in
+x|xyes)
+ # Assume -lc should be added
+ archive_cmds_need_lc_CXX=yes
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $archive_cmds_CXX in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$lt_prog_compiler_wl_CXX
+ pic_flag=$lt_prog_compiler_pic_CXX
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
+ allow_undefined_flag_CXX=
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+ (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ then
+ lt_cv_archive_cmds_need_lc_CXX=no
+ else
+ lt_cv_archive_cmds_need_lc_CXX=yes
+ fi
+ allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_CXX" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc_CXX" >&6; }
+ archive_cmds_need_lc_CXX=$lt_cv_archive_cmds_need_lc_CXX
+ ;;
+ esac
+ fi
+ ;;
+esac
@@ -10505,583 +15311,667 @@ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+case $host_os in
+aix3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+aix[4-9]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[01] | aix4.[01].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+beos*)
+ library_names_spec='${libname}${shared_ext}'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+bsdi[45]*)
+ version_type=linux
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
+ case $GCC,$host_os in
+ yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
+ ;;
+ *)
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" ||
- test -n "$runpath_var" ||
- test "X$hardcode_automatic" = "Xyes" ; then
+dgux*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
- # We can hardcode non-existent directories.
- if test "$hardcode_direct" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
- test "$hardcode_minus_L" != no; then
- # Linking always hardcodes the temporary library directory.
- hardcode_action=relink
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- hardcode_action=immediate
+ case $host_os in
+ freebsd[23].*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- hardcode_action=unsupported
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
-$as_echo "$hardcode_action" >&6; }
-
-if test "$hardcode_action" = relink ||
- test "$inherit_rpath" = yes; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-
-
-
-
-
-
- if test "x$enable_dlopen" != xyes; then
- enable_dlopen=unknown
- enable_dlopen_self=unknown
- enable_dlopen_self_static=unknown
-else
- lt_cv_dlopen=no
- lt_cv_dlopen_libs=
-
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
case $host_os in
- beos*)
- lt_cv_dlopen="load_add_on"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
+ freebsd2.*)
+ shlibpath_overrides_runpath=yes
;;
-
- mingw* | pw32* | cegcc*)
- lt_cv_dlopen="LoadLibrary"
- lt_cv_dlopen_libs=
+ freebsd3.[01]* | freebsdelf3.[01]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
;;
+ esac
+ ;;
- cygwin*)
- lt_cv_dlopen="dlopen"
- lt_cv_dlopen_libs=
+haiku*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ if test "X$HPUX_IA64_MODE" = X32; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ fi
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+ postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
+ ;;
- darwin*)
- # if libdl is installed we need to link against it
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
-$as_echo_n "checking for dlopen in -ldl... " >&6; }
-if ${ac_cv_lib_dl_dlopen+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl $LIBS"
-if test x$gcc_no_link = xyes; then
- as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
-fi
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
+interix[3-9]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_dl_dlopen=yes
-else
- ac_cv_lib_dl_dlopen=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
-$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ version_type=linux
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ hardcode_into_libs=yes
+ ;;
- lt_cv_dlopen="dyld"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
-fi
+# This must be Linux ELF.
- ;;
+# uclinux* changes (here and below) have been submitted to the libtool
+# project, but have not yet been accepted: they are GCC-local changes
+# for the time being. (See
+# https://lists.gnu.org/archive/html/libtool-patches/2018-05/msg00000.html)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu* | uclinuxfdpiceabi)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
- *)
- ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
-if test "x$ac_cv_func_shl_load" = xyes; then :
- lt_cv_dlopen="shl_load"
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
-$as_echo_n "checking for shl_load in -ldld... " >&6; }
-if ${ac_cv_lib_dld_shl_load+:} false; then :
+ # Some binutils ld are patched to set DT_RUNPATH
+ if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
$as_echo_n "(cached) " >&6
else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld $LIBS"
-if test x$gcc_no_link = xyes; then
+ lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \
+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\""
+ if test x$gcc_no_link = xyes; then
as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
fi
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load ();
int
main ()
{
-return shl_load ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_dld_shl_load=yes
-else
- ac_cv_lib_dld_shl_load=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
-$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
-if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
-else
- ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
-if test "x$ac_cv_func_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen"
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
-$as_echo_n "checking for dlopen in -ldl... " >&6; }
-if ${ac_cv_lib_dl_dlopen+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl $LIBS"
-if test x$gcc_no_link = xyes; then
- as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
-fi
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
;
return 0;
}
_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_dl_dlopen=yes
-else
- ac_cv_lib_dl_dlopen=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
-$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
-$as_echo_n "checking for dlopen in -lsvld... " >&6; }
-if ${ac_cv_lib_svld_dlopen+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsvld $LIBS"
-if test x$gcc_no_link = xyes; then
- as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
+if ac_fn_cxx_try_link "$LINENO"; then :
+ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+ lt_cv_shlibpath_overrides_runpath=yes
fi
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_svld_dlopen=yes
-else
- ac_cv_lib_svld_dlopen=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
-$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
-if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
-$as_echo_n "checking for dld_link in -ldld... " >&6; }
-if ${ac_cv_lib_dld_dld_link+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld $LIBS"
-if test x$gcc_no_link = xyes; then
- as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
-fi
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dld_link ();
-int
-main ()
-{
-return dld_link ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_dld_dld_link=yes
-else
- ac_cv_lib_dld_dld_link=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
-$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
-if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
fi
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
-fi
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+newsos6)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
-fi
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+openbsd*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec="/usr/lib"
+ need_lib_prefix=no
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case $host_os in
+ openbsd2.[89] | openbsd2.[89].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ ;;
-fi
+os2*)
+ libname_spec='$name'
+ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
-fi
+rdos*)
+ dynamic_linker=no
+ ;;
+solaris*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
-fi
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
- ;;
+sysv4 | sysv4.3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
esac
+ ;;
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- else
- enable_dlopen=no
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux
+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+ soname_spec='$libname${shared_ext}.$major'
+ shlibpath_var=LD_LIBRARY_PATH
fi
+ ;;
- case $lt_cv_dlopen in
- dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=freebsd-elf
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test "$with_gnu_ld" = yes; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
- save_LDFLAGS="$LDFLAGS"
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
- save_LIBS="$LIBS"
- LIBS="$lt_cv_dlopen_libs $LIBS"
+uts4*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
-$as_echo_n "checking whether a program can dlopen itself... " >&6; }
-if ${lt_cv_dlopen_self+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test "$cross_compiling" = yes; then :
- lt_cv_dlopen_self=cross
-else
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<_LT_EOF
-#line 10869 "configure"
-#include "confdefs.h"
+# Shared libraries for VwWorks, >= 7 only at this stage
+# and (fpic) still incompatible with "large" code models
+# in a few configurations. Only for RTP mode in any case,
+# and upon explicit request at configure time.
+vxworks7*)
+ dynamic_linker=no
+ case ${with_multisubdir}-${enable_shared} in
+ *large*)
+ ;;
+ *mrtp*-yes)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker="$host_os module_loader"
+ ;;
+ esac
+ ;;
+*)
+ dynamic_linker=no
+ ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
-#include <stdio.h>
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
-#ifdef RTLD_GLOBAL
-# define LT_DLGLOBAL RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-# define LT_DLGLOBAL DL_GLOBAL
-# else
-# define LT_DLGLOBAL 0
-# endif
-#endif
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
- find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-# ifdef RTLD_LAZY
-# define LT_DLLAZY_OR_NOW RTLD_LAZY
-# else
-# ifdef DL_LAZY
-# define LT_DLLAZY_OR_NOW DL_LAZY
-# else
-# ifdef RTLD_NOW
-# define LT_DLLAZY_OR_NOW RTLD_NOW
-# else
-# ifdef DL_NOW
-# define LT_DLLAZY_OR_NOW DL_NOW
-# else
-# define LT_DLLAZY_OR_NOW 0
-# endif
-# endif
-# endif
-# endif
-#endif
-/* When -fvisbility=hidden is used, assume the code has been annotated
- correspondingly for the symbols needed. */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
-void fnord () __attribute__((visibility("default")));
-#endif
-void fnord () { int i=42; }
-int main ()
-{
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
- int status = $lt_dlunknown;
- if (self)
- {
- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else
- {
- if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
- else puts (dlerror ());
- }
- /* dlclose (self); */
- }
- else
- puts (dlerror ());
- return status;
-}
-_LT_EOF
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) >&5 2>/dev/null
- lt_status=$?
- case x$lt_status in
- x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
- x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
- x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
- esac
- else :
- # compilation failed
- lt_cv_dlopen_self=no
- fi
-fi
-rm -fr conftest*
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
-$as_echo "$lt_cv_dlopen_self" >&6; }
- if test "x$lt_cv_dlopen_self" = xyes; then
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
-$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
-if ${lt_cv_dlopen_self_static+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test "$cross_compiling" = yes; then :
- lt_cv_dlopen_self_static=cross
-else
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<_LT_EOF
-#line 10975 "configure"
-#include "confdefs.h"
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-#include <stdio.h>
-#ifdef RTLD_GLOBAL
-# define LT_DLGLOBAL RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-# define LT_DLGLOBAL DL_GLOBAL
-# else
-# define LT_DLGLOBAL 0
-# endif
-#endif
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
- find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-# ifdef RTLD_LAZY
-# define LT_DLLAZY_OR_NOW RTLD_LAZY
-# else
-# ifdef DL_LAZY
-# define LT_DLLAZY_OR_NOW DL_LAZY
-# else
-# ifdef RTLD_NOW
-# define LT_DLLAZY_OR_NOW RTLD_NOW
-# else
-# ifdef DL_NOW
-# define LT_DLLAZY_OR_NOW DL_NOW
-# else
-# define LT_DLLAZY_OR_NOW 0
-# endif
-# endif
-# endif
-# endif
-#endif
-/* When -fvisbility=hidden is used, assume the code has been annotated
- correspondingly for the symbols needed. */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
-void fnord () __attribute__((visibility("default")));
-#endif
-void fnord () { int i=42; }
-int main ()
-{
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
- int status = $lt_dlunknown;
- if (self)
- {
- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else
- {
- if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
- else puts (dlerror ());
- }
- /* dlclose (self); */
- }
- else
- puts (dlerror ());
- return status;
-}
-_LT_EOF
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) >&5 2>/dev/null
- lt_status=$?
- case x$lt_status in
- x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
- x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
- x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
- esac
- else :
- # compilation failed
- lt_cv_dlopen_self_static=no
- fi
-fi
-rm -fr conftest*
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
-$as_echo "$lt_cv_dlopen_self_static" >&6; }
- fi
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
- ;;
- esac
- case $lt_cv_dlopen_self in
- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
- *) enable_dlopen_self=unknown ;;
- esac
- case $lt_cv_dlopen_self_static in
- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
- *) enable_dlopen_self_static=unknown ;;
- esac
-fi
@@ -11098,37 +15988,43 @@ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action_CXX=
+if test -n "$hardcode_libdir_flag_spec_CXX" ||
+ test -n "$runpath_var_CXX" ||
+ test "X$hardcode_automatic_CXX" = "Xyes" ; then
-striplib=
-old_striplib=
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
-$as_echo_n "checking whether stripping libraries is possible... " >&6; }
-if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
+ # We can hardcode non-existent directories.
+ if test "$hardcode_direct_CXX" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
+ test "$hardcode_minus_L_CXX" != no; then
+ # Linking always hardcodes the temporary library directory.
+ hardcode_action_CXX=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ hardcode_action_CXX=immediate
+ fi
else
-# FIXME - insert some real tests, host_os isn't really good enough
- case $host_os in
- darwin*)
- if test -n "$STRIP" ; then
- striplib="$STRIP -x"
- old_striplib="$STRIP -S"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- fi
- ;;
- *)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- ;;
- esac
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ hardcode_action_CXX=unsupported
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5
+$as_echo "$hardcode_action_CXX" >&6; }
+if test "$hardcode_action_CXX" = relink ||
+ test "$inherit_rpath_CXX" = yes; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
@@ -11136,573 +16032,879 @@ fi
+ fi # test -n "$compiler"
+ CC=$lt_save_CC
+ LDCXX=$LD
+ LD=$lt_save_LD
+ GCC=$lt_save_GCC
+ with_gnu_ld=$lt_save_with_gnu_ld
+ lt_cv_path_LDCXX=$lt_cv_path_LD
+ lt_cv_path_LD=$lt_save_path_LD
+ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
- # Report which library types will actually be built
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
-$as_echo_n "checking if libtool supports shared libraries... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
-$as_echo "$can_build_shared" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
-$as_echo_n "checking whether to build shared libraries... " >&6; }
- test "$can_build_shared" = "no" && enable_shared=no
- # On AIX, shared libraries and static libraries use the same namespace, and
- # are all built from PIC.
- case $host_os in
- aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
- aix[4-9]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
- esac
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
-$as_echo "$enable_shared" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
-$as_echo_n "checking whether to build static libraries... " >&6; }
- # Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
-$as_echo "$enable_static" >&6; }
+
+
+
+ ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+
+
+enable_dlopen=yes
+
+
+
+
+ if test x$enable_darwin_at_rpath = xyes; then
+ ENABLE_DARWIN_AT_RPATH_TRUE=
+ ENABLE_DARWIN_AT_RPATH_FALSE='#'
+else
+ ENABLE_DARWIN_AT_RPATH_TRUE='#'
+ ENABLE_DARWIN_AT_RPATH_FALSE=
+fi
+
+
+
+
+
+if test "${multilib}" = "yes"; then
+ multilib_arg="--enable-multilib"
+else
+ multilib_arg=
fi
+
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-CC="$lt_save_CC"
-
-
-
-
+# Check the compiler.
+# The same as in boehm-gc and libstdc++. Have to borrow it from there.
+# We must force CC to /not/ be precious variables; otherwise
+# the wrong, non-multilib-adjusted value will be used in multilibs.
+# As a side effect, we have to subst CFLAGS ourselves.
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+else
+ CC="$ac_cv_prog_CC"
+fi
- ac_config_commands="$ac_config_commands libtool"
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+ fi
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
-# Only expand once:
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl.exe
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
-set x ${MAKE-make}
-ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl.exe
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
- cat >conftest.make <<\_ACEOF
-SHELL = /bin/sh
-all:
- @echo '@@@%%%=$(MAKE)=@@@%%%'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
-case `${MAKE-make} -f conftest.make 2>/dev/null` in
- *@@@%%%=?*=@@@%%%*)
- eval ac_cv_prog_make_${ac_make}_set=yes;;
- *)
- eval ac_cv_prog_make_${ac_make}_set=no;;
-esac
-rm -f conftest.make
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
fi
-if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- SET_MAKE=
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
- SET_MAKE="MAKE=${MAKE-make}"
fi
-# -------
-# Headers
-# -------
+ test -n "$ac_ct_CC" && break
+done
-for ac_header in stdio.h
-do :
- ac_fn_c_check_header_mongrel "$LINENO" "stdio.h" "ac_cv_header_stdio_h" "$ac_includes_default"
-if test "x$ac_cv_header_stdio_h" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_STDIO_H 1
-_ACEOF
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+fi
fi
-done
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
-$as_echo_n "checking for ANSI C header files... " >&6; }
-if ${ac_cv_header_stdc+:} false; then :
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
int
main ()
{
+#ifndef __GNUC__
+ choke me
+#endif
;
return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_header_stdc=yes
+ ac_compiler_gnu=yes
else
- ac_cv_header_stdc=no
+ ac_compiler_gnu=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then :
-
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GCC=yes
else
- ac_cv_header_stdc=no
+ GCC=
fi
-rm -f conftest*
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
-fi
+int
+main ()
+{
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+else
+ CFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-#include <stdlib.h>
+int
+main ()
+{
+
+ ;
+ return 0;
+}
_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then :
+if ac_fn_c_try_compile "$LINENO"; then :
else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
-fi
+int
+main ()
+{
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then :
- :
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
int
main ()
{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- return 2;
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
return 0;
}
_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-
-else
- ac_cv_header_stdc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-fi
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_c89=$ac_arg
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
-$as_echo "$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
-
-$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
fi
-
-
-for ac_header in sched.h
-do :
- ac_fn_c_check_header_mongrel "$LINENO" "sched.h" "ac_cv_header_sched_h" "$ac_includes_default"
-if test "x$ac_cv_header_sched_h" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_SCHED_H 1
-_ACEOF
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+ xno)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
fi
-done
-
-
-# -----------------
-# __int128 support
-# -----------------
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether __int128 is supported" >&5
-$as_echo_n "checking whether __int128 is supported... " >&6; }
-if ${libgcobol_cv_have_int128+:} false; then :
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test x$gcc_no_link = xyes; then
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
- __int128 foo (__int128 )
- {
- __int128 aaa;
- return (__int128) aaa;
- }
-
- __int128 bar (__int128 )
- {
- __int128 aaa;
- return (__int128) aaa;
- }
-
int
main ()
{
- foo (1);
- bar (1);
-
;
return 0;
}
_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+ ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
- libgcobol_cv_have_int128=yes
-else
- libgcobol_cv_have_int128=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
+CC_FOR_BUILD=${CC_FOR_BUILD:-gcc}
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing malloc" >&5
+$as_echo_n "checking for library containing malloc... " >&6; }
+if ${ac_cv_search_malloc+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- if test x$gcc_no_link = xyes; then
- as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
-fi
+ ac_func_search_save_LIBS=$LIBS
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
- __int128 foo (__int128 )
- {
- __int128 aaa;
- return (__int128) aaa;
- }
-
- __int128 bar (__int128 )
- {
- __int128 aaa;
- return (__int128) aaa;
- }
-
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char malloc ();
int
main ()
{
-
- foo (1);
- bar (1);
-
+return malloc ();
;
return 0;
}
_ACEOF
+for ac_lib in '' c; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if test x$gcc_no_link = xyes; then
+ as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
+fi
if ac_fn_c_try_link "$LINENO"; then :
-
- libgcobol_cv_have_int128=yes
-
-else
-
- libgcobol_cv_have_int128=no
-
+ ac_cv_search_malloc=$ac_res
fi
rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libgcobol_cv_have_int128" >&5
-$as_echo "$libgcobol_cv_have_int128" >&6; }
-# The following conditional is useful when this creates a Makefile.am file that
-# is subsequently processed into a Makefile.in file. At the present time,
-# however the libgcobol build uses a hardcoded Makefile.in file.
- if test "x$libgcobol_cv_have_int128" = xyes; then
- BUILD_LIBGCOBOL_TRUE=
- BUILD_LIBGCOBOL_FALSE='#'
-else
- BUILD_LIBGCOBOL_TRUE='#'
- BUILD_LIBGCOBOL_FALSE=
+ conftest$ac_exeext
+ if ${ac_cv_search_malloc+:} false; then :
+ break
fi
-
-
-# -----------
-# Miscellanea
-# -----------
-
-# Check if we have thread-local storage
-
-
- # Check whether --enable-tls was given.
-if test "${enable_tls+set}" = set; then :
- enableval=$enable_tls;
- case "$enableval" in
- yes|no) ;;
- *) as_fn_error $? "Argument to enable/disable tls must be yes or no" "$LINENO" 5 ;;
- esac
+done
+if ${ac_cv_search_malloc+:} false; then :
else
- enable_tls=yes
+ ac_cv_search_malloc=no
fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_malloc" >&5
+$as_echo "$ac_cv_search_malloc" >&6; }
+ac_res=$ac_cv_search_malloc
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the target supports thread-local storage" >&5
-$as_echo_n "checking whether the target supports thread-local storage... " >&6; }
-if ${gcc_cv_have_tls+:} false; then :
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing cosf" >&5
+$as_echo_n "checking for library containing cosf... " >&6; }
+if ${ac_cv_search_cosf+:} false; then :
$as_echo_n "(cached) " >&6
else
-
- if test "$cross_compiling" = yes; then :
- if test x$gcc_no_link = xyes; then
- as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
-fi
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-__thread int a; int b; int main() { return a = b; }
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- chktls_save_LDFLAGS="$LDFLAGS"
- case $host in
- *-*-linux* | -*-uclinuxfdpic*)
- LDFLAGS="-shared -Wl,--no-undefined $LDFLAGS"
- ;;
- esac
- chktls_save_CFLAGS="$CFLAGS"
- CFLAGS="-fPIC $CFLAGS"
- if test x$gcc_no_link = xyes; then
- as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
-fi
+ ac_func_search_save_LIBS=$LIBS
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-int f() { return 0; }
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char cosf ();
+int
+main ()
+{
+return cosf ();
+ ;
+ return 0;
+}
_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
+for ac_lib in '' m; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
if test x$gcc_no_link = xyes; then
as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
fi
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-__thread int a; int b; int f() { return a = b; }
-_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
- gcc_cv_have_tls=yes
-else
- gcc_cv_have_tls=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-else
- gcc_cv_have_tls=yes
+ ac_cv_search_cosf=$ac_res
fi
rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- CFLAGS="$chktls_save_CFLAGS"
- LDFLAGS="$chktls_save_LDFLAGS"
-else
- gcc_cv_have_tls=no
+ conftest$ac_exeext
+ if ${ac_cv_search_cosf+:} false; then :
+ break
fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-
+done
+if ${ac_cv_search_cosf+:} false; then :
else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-__thread int a; int b; int main() { return a = b; }
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- chktls_save_LDFLAGS="$LDFLAGS"
- LDFLAGS="-static $LDFLAGS"
- if test x$gcc_no_link = xyes; then
- as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
-fi
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-int main() { return 0; }
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- if test "$cross_compiling" = yes; then :
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot run test program while cross compiling
-See \`config.log' for more details" "$LINENO" 5; }
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-__thread int a; int b; int main() { return a = b; }
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- gcc_cv_have_tls=yes
-else
- gcc_cv_have_tls=no
+ ac_cv_search_cosf=no
fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_cosf" >&5
+$as_echo "$ac_cv_search_cosf" >&6; }
+ac_res=$ac_cv_search_cosf
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-else
- gcc_cv_have_tls=yes
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- LDFLAGS="$chktls_save_LDFLAGS"
- if test $gcc_cv_have_tls = yes; then
- chktls_save_CFLAGS="$CFLAGS"
- thread_CFLAGS=failed
- for flag in '' '-pthread' '-lpthread'; do
- CFLAGS="$flag $chktls_save_CFLAGS"
- if test x$gcc_no_link = xyes; then
- as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing clock_gettime" >&5
+$as_echo_n "checking for library containing clock_gettime... " >&6; }
+if ${ac_cv_search_clock_gettime+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-#include <pthread.h>
- void *g(void *d) { return NULL; }
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char clock_gettime ();
int
main ()
{
-pthread_t t; pthread_create(&t,NULL,g,NULL);
+return clock_gettime ();
;
return 0;
}
_ACEOF
+for ac_lib in '' rt; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if test x$gcc_no_link = xyes; then
+ as_fn_error $? "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
+fi
if ac_fn_c_try_link "$LINENO"; then :
- thread_CFLAGS="$flag"
+ ac_cv_search_clock_gettime=$ac_res
fi
rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- if test "X$thread_CFLAGS" != Xfailed; then
- break
- fi
- done
- CFLAGS="$chktls_save_CFLAGS"
- if test "X$thread_CFLAGS" != Xfailed; then
- CFLAGS="$thread_CFLAGS $chktls_save_CFLAGS"
- if test "$cross_compiling" = yes; then :
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot run test program while cross compiling
-See \`config.log' for more details" "$LINENO" 5; }
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <pthread.h>
- __thread int a;
- static int *volatile a_in_other_thread;
- static void *
- thread_func (void *arg)
- {
- a_in_other_thread = &a;
- return (void *)0;
- }
-int
-main ()
-{
-pthread_t thread;
- void *thread_retval;
- int *volatile a_in_main_thread;
- a_in_main_thread = &a;
- if (pthread_create (&thread, (pthread_attr_t *)0,
- thread_func, (void *)0))
- return 0;
- if (pthread_join (thread, &thread_retval))
- return 0;
- return (a_in_other_thread == a_in_main_thread);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- gcc_cv_have_tls=yes
-else
- gcc_cv_have_tls=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
+ conftest$ac_exeext
+ if ${ac_cv_search_clock_gettime+:} false; then :
+ break
fi
+done
+if ${ac_cv_search_clock_gettime+:} false; then :
- CFLAGS="$chktls_save_CFLAGS"
- fi
- fi
else
- gcc_cv_have_tls=no
+ ac_cv_search_clock_gettime=no
fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_clock_gettime" >&5
+$as_echo "$ac_cv_search_clock_gettime" >&6; }
+ac_res=$ac_cv_search_clock_gettime
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_have_tls" >&5
-$as_echo "$gcc_cv_have_tls" >&6; }
- if test "$enable_tls $gcc_cv_have_tls" = "yes yes"; then
-$as_echo "#define HAVE_TLS 1" >>confdefs.h
- fi
+# Add dependencies for libgcobol.spec file
+SPEC_LIBGCOBOL_DEPS="$LIBS"
+
+
+# libgcobol soname version
+LIBGCOBOL_VERSION=1:0:0
+
+
+## added
+VERSION_SUFFIX=$(echo $LIBGCOBOL_VERSION | tr ':' '.' )
+
+## end added
# Determine what GCC version number to use in filesystem paths.
@@ -11719,18 +16921,22 @@ fi
-# ------
-# Output
-# ------
+extra_darwin_ldflags_libgcobol=
+case $host in
+ *-*-darwin*)
+ extra_darwin_ldflags_libgcobol=-Wl,-U,___cobol_main ;;
+ *) ;;
+esac
+
-if test ${multilib} = yes; then
- multilib_arg="--enable-multilib"
-else
- multilib_arg=
-fi
ac_config_files="$ac_config_files Makefile"
+####AC_CONFIG_FILES(libgcobol.spec)
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: libgcobol has been configured." >&5
+$as_echo "$as_me: libgcobol has been configured." >&6;}
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
@@ -11840,14 +17046,50 @@ LIBOBJS=$ac_libobjs
LTLIBOBJS=$ac_ltlibobjs
-if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
- as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+ as_fn_error $? "conditional \"AMDEP\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+ as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+ if test -n "$EXEEXT"; then
+ am__EXEEXT_TRUE=
+ am__EXEEXT_FALSE='#'
+else
+ am__EXEEXT_TRUE='#'
+ am__EXEEXT_FALSE=
+fi
+
if test -z "${BUILD_LIBGCOBOL_TRUE}" && test -z "${BUILD_LIBGCOBOL_FALSE}"; then
as_fn_error $? "conditional \"BUILD_LIBGCOBOL\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
+if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
+ as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
+ as_fn_error $? "conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCCAS_TRUE}" && test -z "${am__fastdepCCAS_FALSE}"; then
+ as_fn_error $? "conditional \"am__fastdepCCAS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${ENABLE_DARWIN_AT_RPATH_TRUE}" && test -z "${ENABLE_DARWIN_AT_RPATH_FALSE}"; then
+ as_fn_error $? "conditional \"ENABLE_DARWIN_AT_RPATH\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
: "${CONFIG_STATUS=./config.status}"
ac_write_fail=0
@@ -12322,6 +17564,7 @@ gives unlimited permission to copy, distribute and modify it."
ac_pwd='$ac_pwd'
srcdir='$srcdir'
INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
AWK='$AWK'
test -n "\$AWK" || AWK=awk
_ACEOF
@@ -12443,6 +17686,7 @@ CC="$CC"
CXX="$CXX"
GFORTRAN="$GFORTRAN"
GDC="$GDC"
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
# The HP-UX ksh and POSIX shell print the target directory to stdout
@@ -12452,9 +17696,6 @@ GDC="$GDC"
sed_quote_subst='$sed_quote_subst'
double_quote_subst='$double_quote_subst'
delay_variable_subst='$delay_variable_subst'
-AS='`$ECHO "$AS" | $SED "$delay_single_quote_subst"`'
-DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
-OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
@@ -12485,6 +17726,7 @@ lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
@@ -12574,6 +17816,61 @@ enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_sub
enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs='`$ECHO "$compiler_lib_search_dirs" | $SED "$delay_single_quote_subst"`'
+predep_objects='`$ECHO "$predep_objects" | $SED "$delay_single_quote_subst"`'
+postdep_objects='`$ECHO "$postdep_objects" | $SED "$delay_single_quote_subst"`'
+predeps='`$ECHO "$predeps" | $SED "$delay_single_quote_subst"`'
+postdeps='`$ECHO "$postdeps" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path='`$ECHO "$compiler_lib_search_path" | $SED "$delay_single_quote_subst"`'
+LD_CXX='`$ECHO "$LD_CXX" | $SED "$delay_single_quote_subst"`'
+reload_flag_CXX='`$ECHO "$reload_flag_CXX" | $SED "$delay_single_quote_subst"`'
+reload_cmds_CXX='`$ECHO "$reload_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds_CXX='`$ECHO "$old_archive_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_CXX='`$ECHO "$compiler_CXX" | $SED "$delay_single_quote_subst"`'
+GCC_CXX='`$ECHO "$GCC_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "$lt_prog_compiler_no_builtin_flag_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_CXX='`$ECHO "$lt_prog_compiler_pic_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static_CXX='`$ECHO "$lt_prog_compiler_static_CXX" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_CXX='`$ECHO "$lt_cv_prog_compiler_c_o_CXX" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc_CXX='`$ECHO "$archive_cmds_need_lc_CXX" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_CXX='`$ECHO "$enable_shared_with_static_runtimes_CXX" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_CXX='`$ECHO "$export_dynamic_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec_CXX='`$ECHO "$whole_archive_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object_CXX='`$ECHO "$compiler_needs_object_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_CXX='`$ECHO "$old_archive_from_new_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_CXX='`$ECHO "$old_archive_from_expsyms_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+archive_cmds_CXX='`$ECHO "$archive_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds_CXX='`$ECHO "$archive_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+module_cmds_CXX='`$ECHO "$module_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds_CXX='`$ECHO "$module_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld_CXX='`$ECHO "$with_gnu_ld_CXX" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag_CXX='`$ECHO "$allow_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag_CXX='`$ECHO "$no_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_CXX='`$ECHO "$hardcode_libdir_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_ld_CXX='`$ECHO "$hardcode_libdir_flag_spec_ld_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator_CXX='`$ECHO "$hardcode_libdir_separator_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_CXX='`$ECHO "$hardcode_direct_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute_CXX='`$ECHO "$hardcode_direct_absolute_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L_CXX='`$ECHO "$hardcode_minus_L_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_CXX='`$ECHO "$hardcode_shlibpath_var_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic_CXX='`$ECHO "$hardcode_automatic_CXX" | $SED "$delay_single_quote_subst"`'
+inherit_rpath_CXX='`$ECHO "$inherit_rpath_CXX" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs_CXX='`$ECHO "$link_all_deplibs_CXX" | $SED "$delay_single_quote_subst"`'
+fix_srcfile_path_CXX='`$ECHO "$fix_srcfile_path_CXX" | $SED "$delay_single_quote_subst"`'
+always_export_symbols_CXX='`$ECHO "$always_export_symbols_CXX" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds_CXX='`$ECHO "$export_symbols_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms_CXX='`$ECHO "$exclude_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
+include_expsyms_CXX='`$ECHO "$include_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
+prelink_cmds_CXX='`$ECHO "$prelink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+file_list_spec_CXX='`$ECHO "$file_list_spec_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_action_CXX='`$ECHO "$hardcode_action_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs_CXX='`$ECHO "$compiler_lib_search_dirs_CXX" | $SED "$delay_single_quote_subst"`'
+predep_objects_CXX='`$ECHO "$predep_objects_CXX" | $SED "$delay_single_quote_subst"`'
+postdep_objects_CXX='`$ECHO "$postdep_objects_CXX" | $SED "$delay_single_quote_subst"`'
+predeps_CXX='`$ECHO "$predeps_CXX" | $SED "$delay_single_quote_subst"`'
+postdeps_CXX='`$ECHO "$postdeps_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path_CXX='`$ECHO "$compiler_lib_search_path_CXX" | $SED "$delay_single_quote_subst"`'
LTCC='$LTCC'
LTCFLAGS='$LTCFLAGS'
@@ -12588,10 +17885,7 @@ _LTECHO_EOF'
}
# Quote evaled strings.
-for var in AS \
-DLLTOOL \
-OBJDUMP \
-SHELL \
+for var in SHELL \
ECHO \
SED \
GREP \
@@ -12603,6 +17897,7 @@ LN_S \
lt_SP2NL \
lt_NL2SP \
reload_flag \
+OBJDUMP \
deplibs_check_method \
file_magic_cmd \
AR \
@@ -12648,7 +17943,40 @@ soname_spec \
install_override_mode \
finish_eval \
old_striplib \
-striplib; do
+striplib \
+compiler_lib_search_dirs \
+predep_objects \
+postdep_objects \
+predeps \
+postdeps \
+compiler_lib_search_path \
+LD_CXX \
+reload_flag_CXX \
+compiler_CXX \
+lt_prog_compiler_no_builtin_flag_CXX \
+lt_prog_compiler_wl_CXX \
+lt_prog_compiler_pic_CXX \
+lt_prog_compiler_static_CXX \
+lt_cv_prog_compiler_c_o_CXX \
+export_dynamic_flag_spec_CXX \
+whole_archive_flag_spec_CXX \
+compiler_needs_object_CXX \
+with_gnu_ld_CXX \
+allow_undefined_flag_CXX \
+no_undefined_flag_CXX \
+hardcode_libdir_flag_spec_CXX \
+hardcode_libdir_flag_spec_ld_CXX \
+hardcode_libdir_separator_CXX \
+fix_srcfile_path_CXX \
+exclude_expsyms_CXX \
+include_expsyms_CXX \
+file_list_spec_CXX \
+compiler_lib_search_dirs_CXX \
+predep_objects_CXX \
+postdep_objects_CXX \
+predeps_CXX \
+postdeps_CXX \
+compiler_lib_search_path_CXX; do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[\\\\\\\`\\"\\\$]*)
eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
@@ -12677,7 +18005,17 @@ postinstall_cmds \
postuninstall_cmds \
finish_cmds \
sys_lib_search_path_spec \
-sys_lib_dlsearch_path_spec; do
+sys_lib_dlsearch_path_spec \
+reload_cmds_CXX \
+old_archive_cmds_CXX \
+old_archive_from_new_cmds_CXX \
+old_archive_from_expsyms_cmds_CXX \
+archive_cmds_CXX \
+archive_expsym_cmds_CXX \
+module_cmds_CXX \
+module_expsym_cmds_CXX \
+export_symbols_cmds_CXX \
+prelink_cmds_CXX; do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[\\\\\\\`\\"\\\$]*)
eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
@@ -12708,6 +18046,8 @@ fi
+
+
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
@@ -12716,8 +18056,9 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
for ac_config_target in $ac_config_targets
do
case $ac_config_target in
- "default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
"config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+ "default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
"libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
"Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
@@ -13168,6 +18509,11 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
[\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
*) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
esac
+ ac_MKDIR_P=$MKDIR_P
+ case $MKDIR_P in
+ [\\/$]* | ?:[\\/]* ) ;;
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+ esac
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
@@ -13222,6 +18568,7 @@ s&@builddir@&$ac_builddir&;t t
s&@abs_builddir@&$ac_abs_builddir&;t t
s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
$ac_datarootdir_hack
"
eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
@@ -13266,6 +18613,40 @@ $as_echo "$as_me: $ac_file is unchanged" >&6;}
&& eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
|| as_fn_error $? "could not create -" "$LINENO" 5
fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$_am_arg" : 'X\(//\)[^/]' \| \
+ X"$_am_arg" : 'X\(//\)$' \| \
+ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`/stamp-h$_am_stamp_count
;;
:C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
@@ -13283,6 +18664,99 @@ case " $CONFIG_FILES " in
ac_file=Makefile . ${multi_basedir}/config-ml.in
;;
esac ;;
+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+ # Older Autoconf quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named 'Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$mf" : 'X\(//\)[^/]' \| \
+ X"$mf" : 'X\(//\)$' \| \
+ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running 'make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "$am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$file" : 'X\(//\)[^/]' \| \
+ X"$file" : 'X\(//\)$' \| \
+ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir=$dirpart/$fdir; as_fn_mkdir_p
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+ ;;
"libtool":C)
# See if we are running on zsh, and set the options which allow our
@@ -13332,19 +18806,10 @@ esac ;;
# The names of the tagged configurations supported by this script.
-available_tags=""
+available_tags="CXX "
# ### BEGIN LIBTOOL CONFIG
-# Assembler program.
-AS=$lt_AS
-
-# DLL creation program.
-DLLTOOL=$lt_DLLTOOL
-
-# Object dumper program.
-OBJDUMP=$lt_OBJDUMP
-
# Which release of libtool.m4 was used?
macro_version=$macro_version
macro_revision=$macro_revision
@@ -13416,6 +18881,9 @@ SP2NL=$lt_lt_SP2NL
# turn newlines into spaces.
NL2SP=$lt_lt_NL2SP
+# An object symbol dumper.
+OBJDUMP=$lt_OBJDUMP
+
# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$lt_deplibs_check_method
@@ -13694,6 +19162,20 @@ file_list_spec=$lt_file_list_spec
# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects
+postdep_objects=$lt_postdep_objects
+predeps=$lt_predeps
+postdeps=$lt_postdeps
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path
+
# ### END LIBTOOL CONFIG
_LT_EOF
@@ -13927,6 +19409,163 @@ _LT_EOF
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
+
+ cat <<_LT_EOF >> "$ofile"
+
+# ### BEGIN LIBTOOL TAG CONFIG: CXX
+
+# The linker used to build libraries.
+LD=$lt_LD_CXX
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag_CXX
+reload_cmds=$lt_reload_cmds_CXX
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds_CXX
+
+# A language specific compiler.
+CC=$lt_compiler_CXX
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC_CXX
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_CXX
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_CXX
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_CXX
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_CXX
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object_CXX
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds_CXX
+archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds_CXX
+module_expsym_cmds=$lt_module_expsym_cmds_CXX
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld_CXX
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_CXX
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_CXX
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
+
+# If ld is used when linking, flag to hardcode \$libdir into a binary
+# during linking. This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct_CXX
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute_CXX
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L_CXX
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic_CXX
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath_CXX
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_CXX
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path=$lt_fix_srcfile_path_CXX
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols_CXX
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_CXX
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_CXX
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_CXX
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds_CXX
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec_CXX
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_CXX
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects_CXX
+postdep_objects=$lt_postdep_objects_CXX
+predeps=$lt_predeps_CXX
+postdeps=$lt_postdeps_CXX
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
+
+# ### END LIBTOOL TAG CONFIG: CXX
+_LT_EOF
+
;;
esac
diff --git a/libgcobol/configure.ac b/libgcobol/configure.ac
index c78e0962ebf926d2621a86e003962ea9de921568..0fb37d4f9ec0f6674244bf14b090ba5e4405a2b4 100644
--- a/libgcobol/configure.ac
+++ b/libgcobol/configure.ac
@@ -1,31 +1,32 @@
-# Process this file with autoconf to produce a configure script.
-# Copyright (C) 2021-2024 Free Software Foundation, Inc.
-# Originally contributed by Dave Love (d.love@dl.ac.uk).
-#
-#This file is part of GCC.
-#
-#GCC is free software; you can redistribute it and/or modify
-#it under the terms of the GNU General Public License as published by
-#the Free Software Foundation; either version 3, or (at your option)
-#any later version.
-#
-#GCC is distributed in the hope that it will be useful,
-#but WITHOUT ANY WARRANTY; without even the implied warranty of
-#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#GNU General Public License for more details.
-#
-#You should have received a copy of the GNU General Public License
-#along with GCC; see the file COPYING3. If not see
-#<http://www.gnu.org/licenses/>.
-
-AC_INIT(package-unused, version-unused,, libgcobol)
-GCC_TOPLEV_SUBDIRS
+# Configure script for libgcobol.
+# Adapted by James K. Lowden from configure script for libalg68.
+
+# This file is part of GCC.
+
+# GCC is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3, or (at your option)
+# any later version.
+
+# GCC is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with GCC; see the file COPYING3. If not see
+# <http://www.gnu.org/licenses/>.
+
+# Configure looks for the existence of this file to auto-config each language.
+# We define several parameters used by configure:
+
+# Process this file with autoreconf to produce a configure script.
+
+AC_INIT(package-unused, version-unused,,libgcobol)
+AC_CONFIG_SRCDIR(Makefile.am)
+AC_CONFIG_HEADER(config.h)
-# We need the following definitions because AC_PROG_LIBTOOL relies on them
-PACKAGE=libgcobol
-# Version is pulled out to make it a bit easier to change using sed.
-VERSION=4:0:0
-AC_SUBST(VERSION)
+AM_ENABLE_MULTILIB(, ..)
# This works around the fact that libtool configuration may change LD
# for this particular configuration, but some shells, instead of
@@ -33,18 +34,63 @@ AC_SUBST(VERSION)
# exported.
ORIGINAL_LD_FOR_MULTILIBS=$LD
-. ${srcdir}/configure.tgt
+####. ${srcdir}/configure.tgt
+
+GCC_NO_EXECUTABLES
+
+AC_USE_SYSTEM_EXTENSIONS
-# -------
-# Options
-# -------
+# Do not delete or change the following two lines. For why, see
+# http://gcc.gnu.org/ml/libstdc++/2003-07/msg00451.html
+AC_CANONICAL_SYSTEM
+target_alias=${target_alias-$host_alias}
+AC_SUBST(target_alias)
+
+AM_INIT_AUTOMAKE # ([1.15.1 no-define foreign no-dist -Wall -Wno-portability])
+
+AH_TEMPLATE(PACKAGE, [Name of package])
+AH_TEMPLATE(VERSION, [Version number of package])
-# We use these options to decide which functions to include.
-AC_ARG_WITH(target-subdir,
-[ --with-target-subdir=SUBDIR
- configuring in a subdirectory])
AC_ARG_WITH(cross-host,
-[ --with-cross-host=HOST configuring with a cross compiler])
+[ --with-cross-host=HOST Configuring with a cross compiler])
+
+# Checks for header files.
+AC_CHECK_HEADERS(malloc.h)
+
+AC_CANONICAL_HOST
+ACX_NONCANONICAL_HOST
+ACX_NONCANONICAL_TARGET
+GCC_TOPLEV_SUBDIRS
+
+# -----------------
+# __int128 support
+# -----------------
+
+AC_CACHE_CHECK([whether __int128 is supported], [libgcobol_cv_have_int128],
+ [GCC_TRY_COMPILE_OR_LINK([
+ __int128 foo (__int128 )
+ {
+ __int128 aaa;
+ return (__int128) aaa;
+ }
+
+ __int128 bar (__int128 )
+ {
+ __int128 aaa;
+ return (__int128) aaa;
+ }
+ ],[
+ foo (1);
+ bar (1);
+ ],[
+ libgcobol_cv_have_int128=yes
+ ],[
+ libgcobol_cv_have_int128=no
+])])
+# The following conditional is useful when this creates a Makefile.am file that
+# is subsequently processed into a Makefile.in file. At the present time,
+# however the libgcobol build uses a hardcoded Makefile.in file.
+AM_CONDITIONAL(BUILD_LIBGCOBOL, [test "x$libgcobol_cv_have_int128" = xyes])
AC_MSG_CHECKING([for --enable-version-specific-runtime-libs])
AC_ARG_ENABLE(version-specific-runtime-libs,
@@ -57,27 +103,35 @@ AC_ARG_ENABLE(version-specific-runtime-libs,
[version_specific_libs=no])
AC_MSG_RESULT($version_specific_libs)
-# -----------
-# Directories
-# -----------
-
-# Find the rest of the source tree framework.
-AM_ENABLE_MULTILIB(, ..)
-
-AC_CANONICAL_SYSTEM
-ACX_NONCANONICAL_TARGET
-
-# Export source directory.
-# These need to be absolute paths, yet at the same time need to
-# canonicalize only relative paths, because then amd will not unmount
-# drives. Thus the use of PWDCMD: set it to 'pawd' or 'amq -w' if using amd.
-case $srcdir in
- [\\/$]* | ?:[\\/]*) glibcpp_srcdir=${srcdir} ;;
- *) glibcpp_srcdir=`cd "$srcdir" && ${PWDCMD-pwd} || echo "$srcdir"` ;;
-esac
-AC_SUBST(glibcpp_srcdir)
-
-GCC_WITH_TOOLEXECLIBDIR
+AC_ARG_WITH(slibdir,
+[ --with-slibdir=DIR shared libraries in DIR [LIBDIR]],
+slibdir="$with_slibdir",
+if test "${version_specific_libs}" = yes; then
+ slibdir='$(libsubdir)'
+elif test -n "$with_cross_host" && test x"$with_cross_host" != x"no"; then
+ slibdir='$(exec_prefix)/$(host_noncanonical)/lib'
+else
+ slibdir='$(libdir)'
+fi)
+AC_SUBST(slibdir)
+
+# Command-line options.
+# Very limited version of AC_MAINTAINER_MODE.
+AC_ARG_ENABLE([maintainer-mode],
+ [AC_HELP_STRING([--enable-maintainer-mode],
+ [enable make rules and dependencies not useful (and
+ sometimes confusing) to the casual installer])],
+ [case ${enable_maintainer_mode} in
+ yes) MAINT='' ;;
+ no) MAINT='#' ;;
+ *) AC_MSG_ERROR([--enable-maintainer-mode must be yes or no]) ;;
+ esac
+ maintainer_mode=${enableval}],
+ [MAINT='#'])
+AC_SUBST([MAINT])dnl
+
+toolexecdir=no
+toolexeclibdir=no
# Calculate toolexeclibdir
# Also toolexecdir, though it's only used in toolexeclibdir
@@ -94,14 +148,7 @@ case ${version_specific_libs} in
test x"$with_cross_host" != x"no"; then
# Install a library built with a cross compiler in tooldir, not libdir.
toolexecdir='$(exec_prefix)/$(target_noncanonical)'
- case ${with_toolexeclibdir} in
- no)
- toolexeclibdir='$(toolexecdir)/lib'
- ;;
- *)
- toolexeclibdir=${with_toolexeclibdir}
- ;;
- esac
+ toolexeclibdir='$(toolexecdir)/lib'
else
toolexecdir='$(libdir)/gcc-lib/$(target_noncanonical)'
toolexeclibdir='$(libdir)'
@@ -113,135 +160,107 @@ case ${version_specific_libs} in
esac
;;
esac
+
AC_SUBST(toolexecdir)
AC_SUBST(toolexeclibdir)
-# Figure out if we want to name the include directory and the
-# library name changes differently.
-includedirname=include
-libsuffix=
-case "${host}" in
- *-darwin*)
- # Darwin is the only target so far that needs a different include directory.
- includedirname=include-gnu-runtime
- libsuffix=-gnu
- ;;
-esac
-AC_SUBST(includedirname)
-AC_SUBST(libsuffix)
-
-AC_CONFIG_HEADERS(config.h)
-
-# --------
-# Programs
-# --------
+AH_TEMPLATE(PACKAGE, [Name of package])
+AH_TEMPLATE(VERSION, [Version number of package])
-GCC_NO_EXECUTABLES
+AM_MAINTAINER_MODE
-# We must force CC to /not/ be a precious variable; otherwise
+# Check the compiler.
+# The same as in boehm-gc and libstdc++. Have to borrow it from there.
+# We must force CC to /not/ be precious variables; otherwise
# the wrong, non-multilib-adjusted value will be used in multilibs.
# As a side effect, we have to subst CFLAGS ourselves.
+
m4_rename([_AC_ARG_VAR_PRECIOUS],[real_PRECIOUS])
m4_define([_AC_ARG_VAR_PRECIOUS],[])
AC_PROG_CC
+AC_PROG_CXX
+AM_PROG_AS
m4_rename_force([real_PRECIOUS],[_AC_ARG_VAR_PRECIOUS])
-# extra LD Flags which are required for targets
-ACX_LT_HOST_FLAGS
-case "${host}" in
- *-darwin*)
- # Darwin needs -single_module when linking libgcobol
- extra_ldflags_libgcobol='$(lt_host_flags) -Wl,-single_module'
- ;;
- *-cygwin*|*-mingw*)
- # Tell libtool to build DLLs on Windows
- extra_ldflags_libgcobol='$(lt_host_flags)'
- ;;
-esac
-AC_SUBST(extra_ldflags_libgcobol)
-
-# Add CET specific flags if CET is enabled
-GCC_CET_FLAGS(CET_FLAGS)
-XCFLAGS="$XCFLAGS $CET_FLAGS"
-
AC_SUBST(CFLAGS)
-AC_SUBST(XCFLAGS)
-AC_CHECK_TOOL(AS, as)
+# In order to override CFLAGS_FOR_TARGET, all of our special flags go
+# in XCFLAGS. But we need them in CFLAGS during configury. So put them
+# in both places for now and restore CFLAGS at the end of config.
+save_CFLAGS="$CFLAGS"
+
+# Find other programs we need.
AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
+AC_CHECK_TOOL(NM, nm)
+AC_CHECK_TOOL(RANLIB, ranlib, ranlib-not-found-in-path-error)
+AC_PROG_MAKE_SET
AC_PROG_INSTALL
-AM_MAINTAINER_MODE
+AM_PROG_LIBTOOL
+LT_INIT
-# Enable Win32 DLL on MS Windows - FIXME
-AC_LIBTOOL_WIN32_DLL
+AC_LIBTOOL_DLOPEN
-AC_PROG_LIBTOOL
+AM_CONDITIONAL([ENABLE_DARWIN_AT_RPATH], [test x$enable_darwin_at_rpath = xyes])
-AM_PROG_CC_C_O
+AC_SUBST(enable_shared)
+AC_SUBST(enable_static)
-AC_PROG_MAKE_SET
+if test "${multilib}" = "yes"; then
+ multilib_arg="--enable-multilib"
+else
+ multilib_arg=
+fi
-# -------
-# Headers
-# -------
+AC_LANG_C
+# Check the compiler.
+# The same as in boehm-gc and libstdc++. Have to borrow it from there.
+# We must force CC to /not/ be precious variables; otherwise
+# the wrong, non-multilib-adjusted value will be used in multilibs.
+# As a side effect, we have to subst CFLAGS ourselves.
-AC_CHECK_HEADERS(stdio.h)
+m4_rename([_AC_ARG_VAR_PRECIOUS],[real_PRECIOUS])
+m4_define([_AC_ARG_VAR_PRECIOUS],[])
+AC_PROG_CC
+m4_rename_force([real_PRECIOUS],[_AC_ARG_VAR_PRECIOUS])
-AC_HEADER_STDC
+AC_SUBST(CFLAGS)
-AC_CHECK_HEADERS(sched.h)
+CC_FOR_BUILD=${CC_FOR_BUILD:-gcc}
+AC_SUBST(CC_FOR_BUILD)
-# -----------------
-# __int128 support
-# -----------------
+AC_SEARCH_LIBS([malloc], [c])
+AC_SEARCH_LIBS([cosf], [m])
+AC_SEARCH_LIBS([clock_gettime], [rt])
-AC_CACHE_CHECK([whether __int128 is supported], [libgcobol_cv_have_int128],
- [GCC_TRY_COMPILE_OR_LINK([
- __int128 foo (__int128 )
- {
- __int128 aaa;
- return (__int128) aaa;
- }
-
- __int128 bar (__int128 )
- {
- __int128 aaa;
- return (__int128) aaa;
- }
- ],[
- foo (1);
- bar (1);
- ],[
- libgcobol_cv_have_int128=yes
- ],[
- libgcobol_cv_have_int128=no
-])])
-# The following conditional is useful when this creates a Makefile.am file that
-# is subsequently processed into a Makefile.in file. At the present time,
-# however the libgcobol build uses a hardcoded Makefile.in file.
-AM_CONDITIONAL(BUILD_LIBGCOBOL, [test "x$libgcobol_cv_have_int128" = xyes])
+# Add dependencies for libgcobol.spec file
+SPEC_LIBGCOBOL_DEPS="$LIBS"
+AC_SUBST(SPEC_LIBGCOBOL_DEPS)
-# -----------
-# Miscellanea
-# -----------
+# libgcobol soname version
+LIBGCOBOL_VERSION=1:0:0
+AC_SUBST(LIBGCOBOL_VERSION)
-# Check if we have thread-local storage
-GCC_CHECK_TLS
+## added
+VERSION_SUFFIX=$(echo $LIBGCOBOL_VERSION | tr ':' '.' )
+AC_SUBST(VERSION_SUFFIX)
+## end added
# Determine what GCC version number to use in filesystem paths.
GCC_BASE_VER
-# ------
-# Output
-# ------
-
-if test ${multilib} = yes; then
- multilib_arg="--enable-multilib"
-else
- multilib_arg=
-fi
+extra_darwin_ldflags_libgcobol=
+case $host in
+ *-*-darwin*)
+ extra_darwin_ldflags_libgcobol=-Wl,-U,___cobol_main ;;
+ *) ;;
+esac
+AC_SUBST(extra_darwin_ldflags_libgcobol)
+AC_CONFIG_SRCDIR([Makefile.am])
AC_CONFIG_FILES([Makefile])
+####AC_CONFIG_FILES(libgcobol.spec)
+
+AC_MSG_NOTICE([libgcobol has been configured.])
+
AC_OUTPUT