Makefile.tpl

		    else \
		      exit 1; \
		    fi; \
		  else \
		    true; \
		  fi; \
		else \
		  exit 1; \
		fi; \
	      else \
		true; \
	      fi; \
	      srcdiroption="--srcdir=."; \
	      libsrcdir="."; \
	    else \
	      srcdiroption="--srcdir=$${topdir}/$${dir}"; \
	      libsrcdir="$$s/$${dir}"; \
	    fi; \
	    if [ -f $${libsrcdir}/configure ] ; then \
	      rm -f no-such-file skip-this-dir; \
	      CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
		$(BUILD_CONFIGARGS) $${srcdiroption} \
		--with-build-subdir="$(BUILD_SUBDIR)"; \
	    else \
	      rm -f no-such-file skip-this-dir; \
	      CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
		$(BUILD_CONFIGARGS) $${srcdiroption} \
		--with-build-subdir="$(BUILD_SUBDIR)"; \
	    fi || exit 1; \
	    if [ -f skip-this-dir ] ; then \
	      sh skip-this-dir; \
	      rm -f skip-this-dir; \
	      cd ..; rmdir $${dir} || true; \
	    else \
	      true; \
	    fi; \
	  else \
	    true; \
	  fi; \
	else \
	  true; \
	fi

# This rule is used to build the modules which use FLAGS_TO_PASS.  To
# build a target all-X means to cd to X and make all.
#
# all-gui, and all-libproc are handled specially because
# they are still experimental, and if they fail to build, that
# shouldn't stop "make all".
.PHONY: $(ALL_MODULES) all-gui all-libproc
$(ALL_MODULES) all-gui all-libproc:
	@dir=`echo $@ | sed -e 's/all-//'`; \
	if [ -f ./$${dir}/Makefile ] ; then \
	  r=`${PWD}`; export r; \
	  s=`cd $(srcdir); ${PWD}`; export s; \
	  $(SET_LIB_PATH) \
	  (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \
	else \
	  true; \
	fi

# These rules are used to check the modules which use FLAGS_TO_PASS.
# To build a target check-X means to cd to X and make check.  Some
# modules are only tested in a native toolchain.

.PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
$(NATIVE_CHECK_MODULES):
	@if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
	  dir=`echo $@ | sed -e 's/check-//'`; \
	  if [ -f ./$${dir}/Makefile ] ; then \
	    r=`${PWD}`; export r; \
	    s=`cd $(srcdir); ${PWD}`; export s; \
	    $(SET_LIB_PATH) \
	    (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
	  else \
	    true; \
	  fi; \
	fi

$(CROSS_CHECK_MODULES):
	@dir=`echo $@ | sed -e 's/check-//'`; \
	if [ -f ./$${dir}/Makefile ] ; then \
	  r=`${PWD}`; export r; \
	  s=`cd $(srcdir); ${PWD}`; export s; \
	  $(SET_LIB_PATH) \
	  (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
	else \
	  true; \
	fi

# This rule is used to install the modules which use FLAGS_TO_PASS.
# To build a target install-X means to cd to X and make install.
.PHONY: $(INSTALL_MODULES)
$(INSTALL_MODULES): installdirs
	@dir=`echo $@ | sed -e 's/install-//'`; \
	if [ -f ./$${dir}/Makefile ] ; then \
	  r=`${PWD}`; export r; \
	  s=`cd $(srcdir); ${PWD}`; export s; \
	  $(SET_LIB_PATH) \
	  (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
	else \
	  true; \
	fi

# This rule is used to configure the modules which are built with the
# target tools.
.PHONY: $(CONFIGURE_TARGET_MODULES)
$(CONFIGURE_TARGET_MODULES):
	@dir=`echo $@ | sed -e 's/configure-target-//'`; \
	if [ -d $(TARGET_SUBDIR)/$${dir} ]; then \
	  r=`${PWD}`; export r; \
	  $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/$${dir}/tmpmulti.out 2> /dev/null; \
	  if [ -s $(TARGET_SUBDIR)/$${dir}/tmpmulti.out ]; then \
	    if [ -f $(TARGET_SUBDIR)/$${dir}/multilib.out ]; then \
	      if cmp $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out > /dev/null; then \
		rm -f $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \
	      else \
		echo "Multilibs changed for $${dir}, reconfiguring"; \
		rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/Makefile; \
		mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
	      fi; \
	    else \
	      mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
	    fi; \
	  fi; \
	fi; exit 0	# break command into two pieces
	@dir=`echo $@ | sed -e 's/configure-target-//'`; \
	if [ ! -d $(TARGET_SUBDIR) ]; then \
	  true; \
	elif [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
	  true; \
	elif echo " $(TARGET_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
	  if [ -d $(srcdir)/$${dir} ]; then \
	    [ -d $(TARGET_SUBDIR)/$${dir} ] || mkdir $(TARGET_SUBDIR)/$${dir};\
	    r=`${PWD}`; export r; \
	    s=`cd $(srcdir); ${PWD}`; export s; \
	    $(SET_LIB_PATH) \
	    AR="$(AR_FOR_TARGET)"; export AR; \
	    AS="$(AS_FOR_TARGET)"; export AS; \
	    CC="$(CC_FOR_TARGET)"; export CC; \
	    CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
	    CXX="$(CXX_FOR_TARGET)"; export CXX; \
	    CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
	    GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
	    DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
	    LD="$(LD_FOR_TARGET)"; export LD; \
            LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
	    NM="$(NM_FOR_TARGET)"; export NM; \
	    RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
	    WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
	    echo Configuring in $(TARGET_SUBDIR)/$${dir}; \
	    cd "$(TARGET_SUBDIR)/$${dir}" || exit 1; \
	    case $(srcdir) in \
	    /* | [A-Za-z]:[\\/]*) \
	      topdir=$(srcdir) ;; \
	    *) \
	      case "$(TARGET_SUBDIR)" in \
	      .) topdir="../$(srcdir)" ;; \
	      *) topdir="../../$(srcdir)" ;; \
	      esac ;; \
	    esac; \
	    if [ "$(srcdir)" = "." ] ; then \
	      if [ "$(TARGET_SUBDIR)" != "." ] ; then \
		if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \
		  if [ -f Makefile ]; then \
		    if $(MAKE) distclean; then \
		      true; \
		    else \
		      exit 1; \
		    fi; \
		  else \
		    true; \
		  fi; \
		else \
		  exit 1; \
		fi; \
	      else \
		true; \
	      fi; \
	      srcdiroption="--srcdir=."; \
	      libsrcdir="."; \
	    else \
	      srcdiroption="--srcdir=$${topdir}/$${dir}"; \
	      libsrcdir="$$s/$${dir}"; \
	    fi; \
	    if [ -f $${libsrcdir}/configure ] ; then \
	      rm -f no-such-file skip-this-dir; \
	      CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
		$(TARGET_CONFIGARGS) $${srcdiroption} \
		--with-target-subdir="$(TARGET_SUBDIR)"; \
	    else \
	      rm -f no-such-file skip-this-dir; \
	      CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
		$(TARGET_CONFIGARGS) $${srcdiroption} \
		--with-target-subdir="$(TARGET_SUBDIR)"; \
	    fi || exit 1; \
	    if [ -f skip-this-dir ] ; then \
	      sh skip-this-dir; \
	      rm -f skip-this-dir; \
	      cd ..; rmdir $${dir} || true; \
	    else \
	      true; \
	    fi; \
	  else \
	    true; \
	  fi; \
	else \
	  true; \
	fi

# This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
# To build a target all-X means to cd to X and make all.
.PHONY: $(ALL_TARGET_MODULES)
$(ALL_TARGET_MODULES):
	@dir=`echo $@ | sed -e 's/all-target-//'`; \
	if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
	  r=`${PWD}`; export r; \
	  s=`cd $(srcdir); ${PWD}`; export s; \
	  $(SET_LIB_PATH) \
	  (cd $(TARGET_SUBDIR)/$${dir}; \
	    $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
	else \
	  true; \
	fi

# This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
# To build a target install-X means to cd to X and make install.
.PHONY: $(CHECK_TARGET_MODULES)
$(CHECK_TARGET_MODULES):
	@dir=`echo $@ | sed -e 's/check-target-//'`; \
	if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
	  r=`${PWD}`; export r; \
	  s=`cd $(srcdir); ${PWD}`; export s; \
	  $(SET_LIB_PATH) \
	  (cd $(TARGET_SUBDIR)/$${dir}; \
	    $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
	else \
	  true; \
	fi

# This rule is used to install the modules which use
# TARGET_FLAGS_TO_PASS.  To build a target install-X means to cd to X
# and make install.
.PHONY: $(INSTALL_TARGET_MODULES)
$(INSTALL_TARGET_MODULES): installdirs
	@dir=`echo $@ | sed -e 's/install-target-//'`; \
	if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
	  r=`${PWD}`; export r; \
	  s=`cd $(srcdir); ${PWD}`; export s; \
	  $(SET_LIB_PATH) \
	  (cd $(TARGET_SUBDIR)/$${dir}; \
	    $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
	else \
	  true; \
	fi

# This rule is used to build the modules which use X11_FLAGS_TO_PASS.
# To build a target all-X means to cd to X and make all.
.PHONY: $(ALL_X11_MODULES)
$(ALL_X11_MODULES):
	@dir=`echo $@ | sed -e 's/all-//'`; \
	if [ -f ./$${dir}/Makefile ] ; then \
	  r=`${PWD}`; export r; \
	  s=`cd $(srcdir); ${PWD}`; export s; \
	  $(SET_LIB_PATH) \
	  (cd $${dir}; \
	   $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all); \
	else \
	  true; \
	fi

# This rule is used to check the modules which use X11_FLAGS_TO_PASS.
# To build a target check-X means to cd to X and make all.
.PHONY: $(CHECK_X11_MODULES)
$(CHECK_X11_MODULES):
	@dir=`echo $@ | sed -e 's/check-//'`; \
	if [ -f ./$${dir}/Makefile ] ; then \
	  r=`${PWD}`; export r; \
	  s=`cd $(srcdir); ${PWD}`; export s; \
	  $(SET_LIB_PATH) \
	  (cd $${dir}; \
	   $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check); \
	else \
	  true; \
	fi

# This rule is used to install the modules which use X11_FLAGS_TO_PASS.
# To build a target install-X means to cd to X and make install.
.PHONY: $(INSTALL_X11_MODULES)
$(INSTALL_X11_MODULES): installdirs
	@dir=`echo $@ | sed -e 's/install-//'`; \
	if [ -f ./$${dir}/Makefile ] ; then \
	  r=`${PWD}`; export r; \
	  s=`cd $(srcdir); ${PWD}`; export s; \
	  $(SET_LIB_PATH) \
	  (cd $${dir}; \
	   $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install); \
	else \
	  true; \
	fi

# gcc is the only module which uses GCC_FLAGS_TO_PASS.
.PHONY: all-gcc
all-gcc:
	@if [ -f ./gcc/Makefile ] ; then \
	  r=`${PWD}`; export r; \
	  s=`cd $(srcdir); ${PWD}`; export s; \
	  $(SET_LIB_PATH) \
	  (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
	else \
	  true; \
	fi

# Building GCC uses some tools for rebuilding "source" files
# like texinfo, bison/byacc, etc.  So we must depend on those.
#
# While building GCC, it may be necessary to run various target
# programs like the assembler, linker, etc.  So we depend on
# those too.
#
# In theory, on an SMP all those dependencies can be resolved
# in parallel.
#
.PHONY: bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean
bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean: all-bootstrap
	@r=`${PWD}`; export r; \
	s=`cd $(srcdir); ${PWD}`; export s; \
	$(SET_LIB_PATH) \
	echo "Bootstrapping the compiler"; \
	cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) $@
	@r=`${PWD}`; export r; \
	s=`cd $(srcdir); ${PWD}`; export s; \
	case "$@" in \
	  *bootstrap4-lean ) \
			msg="Comparing stage3 and stage4 of the compiler"; \
	  		compare=compare3-lean ;; \
	  *bootstrap4 ) msg="Comparing stage3 and stage4 of the compiler"; \
	  		compare=compare3 ;; \
	  *-lean )	msg="Comparing stage2 and stage3 of the compiler"; \
	  		compare=compare-lean ;; \
	  * )		msg="Comparing stage2 and stage3 of the compiler"; \
	  		compare=compare ;; \
	esac; \
	$(SET_LIB_PATH) \
	echo "$$msg"; \
	cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) $$compare
	@r=`${PWD}`; export r; \
	s=`cd $(srcdir); ${PWD}` ; export s; \
	$(SET_LIB_PATH) \
	echo "Building runtime libraries"; \
	$(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) all

.PHONY: cross
cross: all-texinfo all-bison all-byacc all-binutils all-gas all-ld
	@r=`${PWD}`; export r; \
	s=`cd $(srcdir); ${PWD}`; export s; \
	$(SET_LIB_PATH) \
	echo "Building the C and C++ compiler"; \
	cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) LANGUAGES="c c++"
	@r=`${PWD}`; export r; \
	s=`cd $(srcdir); ${PWD}` ; export s; \
	$(SET_LIB_PATH) \
	echo "Building runtime libraries"; \
	$(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) \
	  LANGUAGES="c c++" all

.PHONY: check-gcc
check-gcc:
	@if [ -f ./gcc/Makefile ] ; then \
	  r=`${PWD}`; export r; \
	  s=`cd $(srcdir); ${PWD}`; export s; \
	  $(SET_LIB_PATH) \
	  (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check); \
	else \
	  true; \
	fi

.PHONY: check-c++
check-c++:
	@if [ -f ./gcc/Makefile ] ; then \
	  r=`${PWD}`; export r; \
	  s=`cd $(srcdir); ${PWD}`; export s; \
	  $(SET_LIB_PATH) \
	  (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check-c++); \
	  $(MAKE) check-target-libstdc++-v3; \
	else \
	  true; \
	fi 

.PHONY: install-gcc
install-gcc:
	@if [ -f ./gcc/Makefile ] ; then \
	  r=`${PWD}`; export r; \
	  s=`cd $(srcdir); ${PWD}`; export s; \
	  $(SET_LIB_PATH) \
	  (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
	else \
	  true; \
	fi

.PHONY: install-gcc-cross
install-gcc-cross:
	@if [ -f ./gcc/Makefile ] ; then \
	  r=`${PWD}`; export r; \
	  s=`cd $(srcdir); ${PWD}`; export s; \
	  $(SET_LIB_PATH) \
	  (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) LANGUAGES="c c++" install); \
	else \
	  true; \
	fi
# EXPERIMENTAL STUFF
# This rule is used to install the modules which use FLAGS_TO_PASS.
# To build a target install-X means to cd to X and make install.
.PHONY: install-dosrel
install-dosrel: installdirs info
	@dir=`echo $@ | sed -e 's/install-//'`; \
	if [ -f ./$${dir}/Makefile ] ; then \
	  r=`${PWD}`; export r; \
	  s=`cd $(srcdir); ${PWD}`; export s; \
	  $(SET_LIB_PATH) \
	  (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
	else \
	  true; \
	fi

install-dosrel-fake:

ALL_GCC = all-gcc
ALL_GCC_C = $(ALL_GCC) all-target-newlib all-target-libgloss
ALL_GCC_CXX = $(ALL_GCC_C) all-target-libstdc++-v3

# This is a list of inter-dependencies among modules.
all-ash:
all-autoconf: all-m4 all-texinfo
all-automake: all-m4 all-texinfo
all-bash:
all-bfd: all-libiberty all-intl
all-binutils: all-libiberty all-opcodes all-bfd all-flex all-bison all-byacc all-intl
all-bison: all-texinfo
configure-target-boehm-gc: $(ALL_GCC_C) configure-target-qthreads
all-target-boehm-gc: configure-target-boehm-gc
all-byacc:
all-bzip2:
all-db:
all-dejagnu: all-tcl all-expect all-tk
all-diff: all-libiberty
all-etc:
configure-target-examples: $(ALL_GCC_C)
all-target-examples: configure-target-examples
all-expect: all-tcl all-tk
all-fileutils: all-libiberty
all-findutils:
all-find:
all-flex: all-libiberty all-bison all-byacc
all-gas: all-libiberty all-opcodes all-bfd all-intl
all-gawk:
all-gcc: all-bison all-byacc all-binutils all-gas all-ld all-zlib
all-bootstrap: all-libiberty all-texinfo all-bison all-byacc all-binutils all-gas all-ld all-zlib
GDB_TK = all-tk all-tcl all-itcl all-tix all-libgui
all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-bison all-byacc all-sim $(gdbnlmrequirements) $(GDB_TK)
all-gettext:
all-gnuserv:
configure-target-gperf: $(ALL_GCC_CXX)
all-target-gperf: configure-target-gperf all-target-libiberty all-target-libstdc++-v3
all-gprof: all-libiberty all-bfd all-opcodes all-intl
all-grep: all-libiberty
all-gui: all-gdb all-libproc
all-guile:
all-gzip: all-libiberty
all-hello: all-libiberty
all-indent:
all-intl:
all-itcl: all-tcl all-tk
all-ld: all-libiberty all-bfd all-opcodes all-bison all-byacc all-flex all-intl
configure-target-libgloss: $(ALL_GCC)
all-target-libgloss: configure-target-libgloss configure-target-newlib
all-libgui: all-tcl all-tk all-itcl
all-libiberty:

all-build-libiberty: configure-build-libiberty

configure-target-libffi: $(ALL_GCC_C) 
all-target-libffi: configure-target-libffi
configure-target-libjava: $(ALL_GCC_C) configure-target-zlib configure-target-boehm-gc configure-target-qthreads configure-target-libffi
all-target-libjava: configure-target-libjava all-fastjar all-target-zlib all-target-boehm-gc all-target-qthreads all-target-libffi
configure-target-libstdc++-v3: $(ALL_GCC_C)
all-target-libstdc++-v3: configure-target-libstdc++-v3 all-target-libiberty
all-libtool:
configure-target-libf2c: $(ALL_GCC_C)
all-target-libf2c: configure-target-libf2c all-target-libiberty
configure-target-libobjc: $(ALL_GCC_C)
all-target-libobjc: configure-target-libobjc all-target-libiberty
all-m4: all-libiberty all-texinfo
all-make: all-libiberty
all-mmalloc:
configure-target-newlib: $(ALL_GCC)
all-target-newlib: configure-target-newlib
configure-target-libtermcap: $(ALL_GCC_C)
all-target-libtermcap: configure-target-libtermcap
all-opcodes: all-bfd all-libiberty
all-patch: all-libiberty
all-perl:
all-prms: all-libiberty
configure-target-qthreads: $(ALL_GCC_C)
all-target-qthreads: configure-target-qthreads
all-rcs:
all-readline:
all-recode: all-libiberty
all-sed: all-libiberty
all-send-pr: all-prms
all-shellutils:
all-sid: all-tcl all-tk
all-sim: all-libiberty all-bfd all-opcodes all-readline
all-snavigator: all-tcl all-tk all-itcl all-tix all-db all-grep all-libgui
all-tar: all-libiberty
all-tcl:
all-tclX: all-tcl all-tk
all-tk: all-tcl
all-texinfo: all-libiberty
all-textutils:
all-time:
all-tix: all-tcl all-tk
all-wdiff:
configure-target-winsup: $(ALL_GCC_C)
all-target-winsup: all-target-libiberty all-target-libtermcap configure-target-winsup
all-uudecode: all-libiberty
all-zip:
all-zlib:
configure-target-zlib: $(ALL_GCC_C)
all-target-zlib: configure-target-zlib
all-fastjar: all-zlib all-libiberty
configure-target-fastjar: configure-target-zlib
all-target-fastjar: configure-target-fastjar all-target-zlib all-target-libiberty
configure-target-libiberty: $(ALL_GCC_C)
all-target-libiberty: configure-target-libiberty
all-target: $(ALL_TARGET_MODULES)
install-target: $(INSTALL_TARGET_MODULES)
install-gdb: install-tcl install-tk install-itcl install-tix install-libgui
install-sid: install-tcl install-tk
### other supporting targets

MAKEDIRS= \
	$(DESTDIR)$(prefix) \
	$(DESTDIR)$(exec_prefix)
.PHONY: installdirs
installdirs: mkinstalldirs
	$(SHELL) $(srcdir)/mkinstalldirs $(MAKEDIRS)

dir.info: do-install-info
	if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
	  $(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
	  mv -f dir.info.new dir.info ; \
	else true ; \
	fi

dist:
	@echo "Building a full distribution of this tree isn't done"
	@echo "via 'make dist'.  Check out the etc/ subdirectory" 

etags tags: TAGS

# Right now this just builds TAGS in each subdirectory.  emacs19 has the
# ability to use several tags files at once, so there is probably no need
# to combine them into one big TAGS file (like CVS 1.3 does).  We could
# (if we felt like it) have this Makefile write a piece of elisp which
# the user could load to tell emacs19 where all the TAGS files we just
# built are.
TAGS: do-TAGS

# Rebuilding Makefile.in, using autogen.
$(srcdir)/Makefile.in: $(srcdir)/Makefile.tpl $(srcdir)/Makefile.def
	cd $(srcdir) && autogen Makefile.def

# with the gnu make, this is done automatically.

Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag) $(gcc_version_trigger)
	$(SHELL) ./config.status

#
# Support for building net releases

# Files in devo used in any net release.
# ChangeLog omitted because it may refer to files which are not in this
# distribution (perhaps it would be better to include it anyway).
DEVO_SUPPORT= README Makefile.in configure configure.in \
	config.guess config.if config.sub config move-if-change \
	mpw-README mpw-build.in mpw-config.in mpw-configure mpw-install \
	COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
	mkinstalldirs ltconfig ltmain.sh missing ylwrap \
	libtool.m4 gettext.m4 ltcf-c.sh ltcf-cxx.sh ltcf-gcj.sh

# Files in devo/etc used in any net release.
# ChangeLog omitted because it may refer to files which are not in this
# distribution (perhaps it would be better to include it anyway).
ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
	make-stds.texi standards.info* configure.texi configure.info* \
	configbuild.* configdev.*


# When you use `make setup-dirs' or `make taz' you should always redefine
# this macro.
SUPPORT_FILES = list-of-support-files-for-tool-in-question

# NOTE: No double quotes in the below.  It is used within shell script
# as VER="$(VER)"
VER = `	if grep 'AM_INIT_AUTOMAKE.*BFD_VERSION' $(TOOL)/configure.in >/dev/null 2>&1; then \
	  sed < bfd/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
	elif grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
	  sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
	elif test -f $(TOOL)/version.in; then \
	  head -1 $(TOOL)/version.in; \
	elif grep VERSION $(TOOL)/Makefile.in > /dev/null 2>&1; then \
	  sed < $(TOOL)/Makefile.in -n 's/^VERSION *= *//p'; \
	else \
	  echo VERSION; \
	fi`
PACKAGE = $(TOOL)

.PHONY: taz
taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
	$(MAKE) -f Makefile.in do-proto-toplev \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"
	$(MAKE) -f Makefile.in do-md5sum \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"
	$(MAKE) -f Makefile.in do-tar \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"
	$(MAKE) -f Makefile.in do-bz2 \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"

.PHONY: gdb-tar
gdb-tar: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
	$(MAKE) -f Makefile.in do-proto-toplev \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"
	$(MAKE) -f Makefile.in do-md5sum \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"
	$(MAKE) -f Makefile.in do-djunpack \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"
	$(MAKE) -f Makefile.in do-tar \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"

.PHONY: gdb-taz
gdb-taz: gdb-tar $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
	$(MAKE) -f Makefile.in gdb-tar \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"
	$(MAKE) -f Makefile.in do-bz2 \
		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(SUPPORT_FILES)"

.PHONY: do-proto-toplev
do-proto-toplev: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
	echo "==> Making $(PACKAGE)-$(VER)/"
	# Take out texinfo from a few places.
	sed -e '/^all\.normal: /s/\all-texinfo //' \
	    -e '/^	install-texinfo /d' \
	<Makefile.in >tmp
	mv -f tmp Makefile.in
	#
	./configure sun4
	[ -z "$(CONFIGURE_TARGET_MODULES)" ] \
	  || $(MAKE) $(CONFIGURE_TARGET_MODULES) \
	    ALL_GCC="" ALL_GCC_C="" ALL_GCC_CXX="" \
	    CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
	# Make links, and run "make diststuff" or "make info" when needed.
	rm -rf proto-toplev ; mkdir proto-toplev
	set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
	for d in $$dirs ; do \
	  if [ -d $$d ]; then \
	    if [ ! -f $$d/Makefile ] ; then true ; \
	    elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
		(cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
	    elif grep '^info:' $$d/Makefile >/dev/null ; then \
	        (cd $$d ; $(MAKE) info ) || exit 1 ; \
	    fi ; \
	    if [ -d $$d/proto-$$d.dir ]; then \
	      ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
	    else \
	      ln -s ../$$d proto-toplev/$$d ; \
	    fi ; \
	  else ln -s ../$$d proto-toplev/$$d ; fi ; \
	done
	cd etc && $(MAKE) info
	$(MAKE) distclean
	#
	mkdir proto-toplev/etc
	(cd proto-toplev/etc; \
	 for i in $(ETC_SUPPORT); do \
		ln -s ../../etc/$$i . ; \
	 done)
	#
	# Take out texinfo from configurable dirs
	rm proto-toplev/configure.in
	sed -e '/^host_tools=/s/texinfo //' \
	    <configure.in >proto-toplev/configure.in
	#
	mkdir proto-toplev/texinfo
	ln -s ../../texinfo/texinfo.tex		proto-toplev/texinfo/
	if test -r texinfo/util/tex3patch ; then \
	  mkdir proto-toplev/texinfo/util && \
	  ln -s ../../../texinfo/util/tex3patch	proto-toplev/texinfo/util ; \
	else true; fi
	chmod -R og=u . || chmod og=u `find . -print`
	#
	# Create .gmo files from .po files.
	for f in `find . -name '*.po' -type f -print`; do \
	     msgfmt -o `echo $$f | sed -e 's/\.po$$/.gmo/'` $$f ; \
	done
	#
	-rm -f $(PACKAGE)-$(VER)
	ln -s proto-toplev $(PACKAGE)-$(VER)

.PHONY: do-tar
do-tar:
	echo "==> Making $(PACKAGE)-$(VER).tar"
	-rm -f $(PACKAGE)-$(VER).tar
	find $(PACKAGE)-$(VER) -follow -name CVS -prune -o -type f -print \
		| tar cTfh - $(PACKAGE)-$(VER).tar

.PHONY: do-bz2
do-bz2:
	echo "==> Bzipping $(PACKAGE)-$(VER).tar.bz2"
	-rm -f $(PACKAGE)-$(VER).tar.bz2
	$(BZIPPROG) -v -9 $(PACKAGE)-$(VER).tar

.PHONY: do-md5sum
do-md5sum:
	echo "==> Adding md5 checksum to top-level directory"
	cd proto-toplev && find * -follow -name CVS -prune -o -type f -print \
		| xargs $(MD5PROG) > ../md5.sum
	mv md5.sum proto-toplev

.PHONY: do-djunpack
do-djunpack:
	echo "==> Adding updated djunpack.bat to top-level directory"
	echo - 's /gdb-[0-9\.]*/gdb-'"$(VER)"'/'
	sed < djunpack.bat > djunpack.new \
		-e 's/gdb-[0-9][0-9\.]*/gdb-'"$(VER)"'/'
	mv djunpack.new djunpack.bat
	-rm -f proto-toplev/djunpack.bat
	ln -s ../djunpack.bat proto-toplev/djunpack.bat

TEXINFO_SUPPORT= texinfo/texinfo.tex
DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)

.PHONY: gas.tar.bz2
GAS_SUPPORT_DIRS= bfd include libiberty opcodes intl setup.com makefile.vms mkdep
gas.tar.bz2: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
	$(MAKE) -f Makefile.in taz TOOL=gas \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"

# The FSF "binutils" release includes gprof and ld.
.PHONY: binutils.tar.bz2
BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof intl setup.com makefile.vms mkdep
binutils.tar.bz2: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
	$(MAKE) -f Makefile.in taz TOOL=binutils \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)"

.PHONY: gas+binutils.tar.bz2
GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
gas+binutils.tar.bz2: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
	$(MAKE) -f Makefile.in taz TOOL=gas \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(GASB_SUPPORT_DIRS)"

GNATS_SUPPORT_DIRS=include libiberty send-pr
gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
	$(MAKE) -f  Makefile.in taz TOOL=gnats \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"

.PHONY: gdb.tar.bz2
GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils intl
gdb.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
	$(MAKE) -f Makefile.in gdb-taz TOOL=gdb \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
.PHONY: gdb.tar
gdb.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
	$(MAKE) -f Makefile.in gdb-tar TOOL=gdb \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"

DEJAGNU_SUPPORT_DIRS=  tcl expect libiberty
.PHONY: dejagnu.tar.bz2
dejagnu.tar.bz2: $(DIST_SUPPORT) $(DEJAGNU_SUPPORT_DIRS) dejagnu
	$(MAKE) -f Makefile.in taz TOOL=dejagnu \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(DEJAGNU_SUPPORT_DIRS)"

.PHONY: gdb+dejagnu.tar.bz2
GDBD_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl expect dejagnu
gdb+dejagnu.tar.bz2: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
	$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=gdb+dejagnu \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
.PHONY: gdb+dejagnu.tar
gdb+dejagnu.tar: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
	$(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=gdb+dejagnu \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"

.PHONY: insight.tar.bz2
INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl tix libgui
insight.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
	$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=insight \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
.PHONY: insight.tar
insight.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
	$(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=insight \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"

.PHONY: insight+dejagnu.tar.bz2
INSIGHTD_SUPPORT_DIRS= $(INSIGHT_SUPPORT_DIRS) expect dejagnu
insight+dejagnu.tar.bz2: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
	$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE="insight+dejagnu" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
.PHONY: insight+dejagnu.tar
insight+dejagnu.tar: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
	$(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE="insight+dejagnu" \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"

.PHONY: newlib.tar.bz2
NEWLIB_SUPPORT_DIRS=libgloss
# taz configures for the sun4 target which won't configure newlib.
# We need newlib configured so that the .info files are made.
# Unfortunately, it is not enough to just configure newlib separately:
# taz will build the .info files but since SUBDIRS won't contain newlib,
# distclean won't be run (leaving Makefile, config.status, and the tmp files
# used in building the .info files, eg: *.def, *.ref).
# The problem isn't solvable however without a lot of extra work because
# target libraries are built in subdir $(target_alias) which gets nuked during
# the make distclean.  For now punt on the issue of shipping newlib info files
# with newlib net releases and wait for a day when some native target (sun4?)
# supports newlib (if only minimally).
newlib.tar.bz2: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
	$(MAKE) -f Makefile.in taz TOOL=newlib \
		MD5PROG="$(MD5PROG)" \
		SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
		DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib

.NOEXPORT:
MAKEOVERRIDES=

# end of Makefile.in