Newer
Older
rm -f $(TARGET_SUBDIR)/[+module+]/Makefile || : ; \
cp multilib.out $(TARGET_SUBDIR)/[+module+]/multilib.out
configure-target-[+module+]: $(TARGET_SUBDIR)/[+module+]/multilib.out
@test ! -f $(TARGET_SUBDIR)/[+module+]/Makefile || exit 0; \
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
[ -d $(TARGET_SUBDIR)/[+module+] ] || \
mkdir $(TARGET_SUBDIR)/[+module+];\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
AR="$(AR_FOR_TARGET)"; export AR; \
AS="$(AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \[+
IF raw_cxx +]
CXX_FOR_TARGET="$(RAW_CXX_FOR_TARGET)"; export CXX_FOR_TARGET; \
CXX="$(RAW_CXX_FOR_TARGET)"; export CXX; \[+
ELSE normal_cxx +]
CXX="$(CXX_FOR_TARGET)"; export CXX; \[+
ENDIF raw_cxx +]
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/[+module+]; \
cd "$(TARGET_SUBDIR)/[+module+]" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(TARGET_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
esac ;; \
esac; \
if [ "$(srcdir)" = "." ] ; then \
if [ "$(TARGET_SUBDIR)" != "." ] ; then \
if $(SHELL) $$s/symlink-tree $${topdir}/[+module+] "no-such-file" ; then \
if [ -f Makefile ]; then \
if $(MAKE) distclean; then \
true; \
else \
exit 1; \
fi; \
else \
true; \
fi; \
srcdiroption="--srcdir=."; \
libsrcdir="."; \
else \
srcdiroption="--srcdir=$${topdir}/[+module+]"; \
libsrcdir="$$s/[+module+]"; \
fi; \
rm -f no-such-file || : ; \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)" \
|| exit 1
.PHONY: all-target-[+module+] maybe-all-target-[+module+]
maybe-all-target-[+module+]:
all-target-[+module+]: configure-target-[+module+]
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd $(TARGET_SUBDIR)/[+module+] && \
$(MAKE) $(TARGET_FLAGS_TO_PASS) [+
IF raw_cxx
+] 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)' [+
ENDIF raw_cxx
+] all)
[+ IF no_check +]
# Dummy target for uncheckable module.
.PHONY: check-target-[+module+]
check-target-[+module+]:
[+ ELSE check +]
.PHONY: check-target-[+module+]
check-target-[+module+]:
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd $(TARGET_SUBDIR)/[+module+] && \
$(MAKE) $(TARGET_FLAGS_TO_PASS) [+
IF raw_cxx
+] 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)' [+
ENDIF raw_cxx
+] check)
[+ ENDIF no_check +]
[+ IF no_install +]
.PHONY: install-target-[+module+] maybe-install-target-[+module+]
maybe-install-target-[+module+]:
# Dummy target for uninstallable.
install-target-[+module+]:
[+ ELSE install +]
.PHONY: install-target-[+module+] maybe-install-target-[+module+]
maybe-install-target-[+module+]:
install-target-[+module+]: installdirs
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd $(TARGET_SUBDIR)/[+module+] && \
$(MAKE) $(TARGET_FLAGS_TO_PASS) install)
[+ ENDIF no_install +]
[+ ENDFOR target_modules +]
# ----------
# GCC module
# ----------
# Unfortunately, while gcc _should_ be a host module,
# libgcc is a target module, and gen* programs are
# build modules. So GCC is a sort of hybrid.
# gcc is the only module which uses GCC_FLAGS_TO_PASS.
.PHONY: configure-gcc maybe-configure-gcc
maybe-configure-gcc:
configure-gcc:
@test ! -f gcc/Makefile || exit 0; \
[ -d gcc ] || mkdir gcc; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
CFLAGS="$(CFLAGS)"; export CFLAGS; \
CXX="$(CXX)"; export CXX; \
CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \
TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
if [ z$(build_canonical) != z$(host_canoncial) ] ; then \
AR="$(AR)"; export AR; \
AS="$(AS)"; export AS; \
CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \
DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \
LD="$(LD)"; export LD; \
NM="$(NM)"; export NM; \
RANLIB="$(RANLIB)"; export RANLIB; \
WINDRES="$(WINDRES)"; export WINDRES; \
OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \
OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \
fi; \
echo Configuring in gcc; \
cd gcc || exit 1; \
case $(srcdir) in \
\.) \
srcdiroption="--srcdir=."; \
libsrcdir=".";; \
/* | [A-Za-z]:[\\/]*) \
srcdiroption="--srcdir=$(srcdir)/gcc"; \
libsrcdir="$$s/gcc";; \
*) \
srcdiroption="--srcdir=../$(srcdir)/gcc"; \
libsrcdir="$$s/gcc";; \
esac; \
$(SHELL) $${libsrcdir}/configure \
$(HOST_CONFIGARGS) $${srcdiroption} \
|| exit 1
Jason Merrill
committed
# Don't 'make all' in gcc if it's already been made by 'bootstrap'; that
# causes trouble. This wart will be fixed eventually by moving
# the bootstrap behavior to this file.
.PHONY: all-gcc maybe-all-gcc
maybe-all-gcc:
all-gcc: configure-gcc
Jason Merrill
committed
@if [ -f gcc/stage_last ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) quickstrap); \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
fi
# Building GCC uses some tools for rebuilding "source" files
# like texinfo, bison/byacc, etc. So we must depend on those.
#
# While building GCC, it may be necessary to run various target
# programs like the assembler, linker, etc. So we depend on
# those too.
#
# In theory, on an SMP all those dependencies can be resolved
# in parallel.
#
Phil Edwards
committed
.PHONY: bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean bubblestrap quickstrap cleanstrap restrap
bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean bubblestrap quickstrap cleanstrap restrap: all-bootstrap configure-gcc
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
echo "Bootstrapping the compiler"; \
cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) $@
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
case "$@" in \
*bootstrap4-lean ) \
msg="Comparing stage3 and stage4 of the compiler"; \
compare=compare3-lean ;; \
*bootstrap4 ) \
msg="Comparing stage3 and stage4 of the compiler"; \
compare=compare3 ;; \
*-lean ) \
msg="Comparing stage2 and stage3 of the compiler"; \
compare=compare-lean ;; \
* ) \
msg="Comparing stage2 and stage3 of the compiler"; \
compare=compare ;; \
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
esac; \
$(SET_LIB_PATH) \
echo "$$msg"; \
cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) $$compare
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}` ; export s; \
$(SET_LIB_PATH) \
echo "Building runtime libraries"; \
$(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) all
.PHONY: cross
cross: all-texinfo all-bison all-byacc all-binutils all-gas all-ld
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
echo "Building the C and C++ compiler"; \
cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) LANGUAGES="c c++"
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}` ; export s; \
$(SET_LIB_PATH) \
echo "Building runtime libraries"; \
$(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) \
LANGUAGES="c c++" all
.PHONY: check-gcc
check-gcc:
@if [ -f ./gcc/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) check); \
.PHONY: check-gcc-c++
check-gcc-c++:
@if [ -f ./gcc/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) check-c++); \
fi
.PHONY: check-c++
check-c++:
$(MAKE) check-target-libstdc++-v3 check-gcc-c++ NOTPARALLEL=parallel-ok
.PHONY: install-gcc maybe-install-gcc
maybe-install-gcc:
install-gcc:
@if [ -f ./gcc/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
# Install the gcc headers files, but not the fixed include files,
# which Cygnus is not allowed to distribute. This rule is very
# dependent on the workings of the gcc Makefile.in.
.PHONY: gcc-no-fixedincludes
gcc-no-fixedincludes:
@if [ -f ./gcc/Makefile ]; then \
rm -rf gcc/tmp-include; \
mv gcc/include gcc/tmp-include 2>/dev/null; \
mkdir gcc/include; \
cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
touch gcc/stmp-fixinc gcc/include/fixed; \
rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
s=`cd $(srcdir); ${PWD}` ; export s; \
$(MAKE) $(GCC_FLAGS_TO_PASS) install); \
rm -rf gcc/include; \
mv gcc/tmp-include gcc/include 2>/dev/null; \
else true; fi
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
# --------------------------------------
# Dependencies between different modules
# --------------------------------------
# There are two types of dependencies here: 'hard' dependencies, where one
# module simply won't build without the other; and 'soft' dependencies, where
# if the depended-on module is missing, the depending module will do without
# or find a substitute somewhere (perhaps installed). Soft dependencies
# are specified by depending on a 'maybe-' target. If you're not sure,
# it's safer to use a soft dependency.
# Host modules specific to gcc.
# GCC needs to identify certain tools.
configure-gcc: maybe-configure-binutils maybe-configure-gas maybe-configure-ld maybe-configure-bison maybe-configure-flex
all-gcc: maybe-all-libiberty maybe-all-bison maybe-all-byacc maybe-all-binutils maybe-all-gas maybe-all-ld maybe-all-zlib
# This is a slightly kludgy method of getting dependencies on
# all-build-libiberty correct; it would be better to build it every time.
all-gcc: maybe-all-build-libiberty
all-bootstrap: maybe-all-libiberty maybe-all-texinfo maybe-all-bison maybe-all-byacc maybe-all-binutils maybe-all-gas maybe-all-ld maybe-all-zlib
# Host modules specific to gdb.
# GDB needs to know that the simulator is being built.
configure-gdb: maybe-configure-tcl maybe-configure-tk maybe-configure-sim
GDB_TK = @GDB_TK@
all-gdb: maybe-all-libiberty maybe-all-opcodes maybe-all-bfd maybe-all-mmalloc maybe-all-readline maybe-all-bison maybe-all-byacc maybe-all-sim $(gdbnlmrequirements) $(GDB_TK)
install-gdb: maybe-install-tcl maybe-install-tk maybe-install-itcl maybe-install-tix maybe-install-libgui
configure-libgui: maybe-configure-tcl maybe-configure-tk
all-libgui: maybe-all-tcl maybe-all-tk maybe-all-itcl
# Host modules specific to binutils.
configure-bfd: configure-libiberty
all-bfd: maybe-all-libiberty maybe-all-intl
all-binutils: maybe-all-libiberty maybe-all-opcodes maybe-all-bfd maybe-all-flex maybe-all-bison maybe-all-byacc maybe-all-intl
# We put install-opcodes before install-binutils because the installed
# binutils might be on PATH, and they might need the shared opcodes
# library.
install-binutils: maybe-install-opcodes
all-gas: maybe-all-libiberty maybe-all-opcodes maybe-all-bfd maybe-all-intl
all-gprof: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-intl
all-ld: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-bison maybe-all-byacc maybe-all-flex maybe-all-intl
all-opcodes: maybe-all-bfd maybe-all-libiberty
# Other host modules in the 'src' repository.
all-dejagnu: maybe-all-tcl maybe-all-expect maybe-all-tk
configure-expect: maybe-configure-tcl maybe-configure-tk
all-expect: maybe-all-tcl maybe-all-tk
configure-itcl: maybe-configure-tcl maybe-configure-tk
all-itcl: maybe-all-tcl maybe-all-tk
# We put install-tcl before install-itcl because itcl wants to run a
# program on installation which uses the Tcl libraries.
install-itcl: maybe-install-tcl
all-sid: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-tcl maybe-all-tk
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
install-sid: maybe-install-tcl maybe-install-tk
all-sim: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-readline maybe-configure-gdb
configure-tk: maybe-configure-tcl
all-tk: maybe-all-tcl
configure-tix: maybe-configure-tcl maybe-configure-tk
all-tix: maybe-all-tcl maybe-all-tk
all-texinfo: maybe-all-libiberty
# Other host modules. Warning, these are not well tested.
all-autoconf: maybe-all-m4 maybe-all-texinfo
all-automake: maybe-all-m4 maybe-all-texinfo
all-bison: maybe-all-texinfo
all-diff: maybe-all-libiberty
all-fastjar: maybe-all-zlib maybe-all-libiberty
all-fileutils: maybe-all-libiberty
all-flex: maybe-all-libiberty maybe-all-bison maybe-all-byacc
all-gzip: maybe-all-libiberty
all-hello: maybe-all-libiberty
all-m4: maybe-all-libiberty maybe-all-texinfo
all-make: maybe-all-libiberty
all-patch: maybe-all-libiberty
all-prms: maybe-all-libiberty
all-recode: maybe-all-libiberty
all-sed: maybe-all-libiberty
all-send-pr: maybe-all-prms
all-tar: maybe-all-libiberty
all-uudecode: maybe-all-libiberty
ALL_GCC = maybe-all-gcc
ALL_GCC_C = $(ALL_GCC) maybe-all-target-newlib maybe-all-target-libgloss
ALL_GCC_CXX = $(ALL_GCC_C) maybe-all-target-libstdc++-v3
# Target modules specific to gcc.
configure-target-boehm-gc: $(ALL_GCC_C) maybe-configure-target-qthreads
configure-target-fastjar: maybe-configure-target-zlib
all-target-fastjar: maybe-all-target-zlib maybe-all-target-libiberty
configure-target-libf2c: $(ALL_GCC_C)
all-target-libf2c: maybe-all-target-libiberty
configure-target-libffi: $(ALL_GCC_C)
configure-target-libjava: $(ALL_GCC_C) maybe-configure-target-zlib maybe-configure-target-boehm-gc maybe-configure-target-qthreads maybe-configure-target-libffi
all-target-libjava: maybe-all-fastjar maybe-all-target-zlib maybe-all-target-boehm-gc maybe-all-target-qthreads maybe-all-target-libffi
configure-target-libobjc: $(ALL_GCC_C)
all-target-libobjc: maybe-all-target-libiberty
configure-target-libstdc++-v3: $(ALL_GCC_C)
all-target-libstdc++-v3: maybe-all-target-libiberty
configure-target-zlib: $(ALL_GCC_C)
# Target modules in the 'src' repository.
configure-target-examples: $(ALL_GCC_C)
configure-target-libgloss: $(ALL_GCC)
all-target-libgloss: maybe-configure-target-newlib
configure-target-libiberty: $(ALL_GCC_C)
configure-target-libtermcap: $(ALL_GCC_C)
configure-target-newlib: $(ALL_GCC)
configure-target-rda: $(ALL_GCC_C)
configure-target-winsup: $(ALL_GCC_C)
all-target-winsup: maybe-all-target-libiberty maybe-all-target-libtermcap
# Other target modules. Warning, these are not well tested.
configure-target-gperf: $(ALL_GCC_CXX)
all-target-gperf: maybe-all-target-libiberty maybe-all-target-libstdc++-v3
configure-target-qthreads: $(ALL_GCC_C)
# Dependencies of maybe-foo on foo. These are used because, for example,
# all-gcc only depends on all-gas if gas is present and being configured.
@maybe_dependencies@
# Serialization dependencies. Host configures don't work well in parallel to
# each other, due to contention over config.cache. Target configures and
# build configures are similar.
@serialization_dependencies@
# --------------------------------
# Regenerating top level configury
# --------------------------------
# Multilib.out tells target dirs what multilibs they should build.
# There is really only one copy. We use the 'timestamp' method to
# work around various timestamp bugs on some systems.
# We use move-if-change so that it's only considered updated when it
# actually changes, because it has to depend on a phony target.
multilib.out: maybe-all-gcc
@r=`${PWD}`; export r; \
echo "Checking multilib configuration..."; \
$(CC_FOR_TARGET) --print-multi-lib > multilib.tmp 2> /dev/null ; \
$(SHELL) $(srcdir)/move-if-change multilib.tmp multilib.out ; \
$(srcdir)/Makefile.in: @MAINT@ $(srcdir)/Makefile.tpl $(srcdir)/Makefile.def
cd $(srcdir) && $(AUTOGEN) Makefile.def
Makefile: $(srcdir)/Makefile.in config.status
CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
config.status: configure $(gcc_version_trigger)
$(SHELL) ./config.status --recheck
$(srcdir)/configure: @MAINT@ $(srcdir)/configure.in $(srcdir)/config/acx.m4
cd $(srcdir) && $(AUTOCONF)
# Tell GNU make 3.79 not to run the top level in parallel. This
# prevents contention for $builddir/$target/config.cache, as well
# as minimizing scatter in file system caches.
NOTPARALLEL = .NOTPARALLEL
$(NOTPARALLEL):