Recent Darwin versions place contraints on the use of run paths
specified in environment variables.  This breaks some assumptions
in the GCC build.

This change allows the user to configure a Darwin build to use
'@rpath/libraryname.dylib' in library names and then to add an
embedded runpath to executables (and libraries with dependents).

The embedded runpath is added by default unless the user adds
'-nodefaultrpaths' to the link line.

For an installed compiler, it means that any executable built with
that compiler will reference the runtimes installed with the
compiler (equivalent to hard-coding the library path into the name
of the library).

During build-time configurations  any "-B" entries will be added to
the runpath thus the newly-built libraries will be found by exes.

Since the install name is set in libtool, that decision needs to be
available here (but might also cause dependent ones in Makefiles,
so we need to export a conditional).

This facility is not available for Darwin 8 or earlier, however the
existing environment variable runpath does work there.

We default this on for systems where the external DYLD_LIBRARY_PATH
does not work and off for Darwin 8 or earlier.  For systems that can
use either method, if the value is unset, we use the default (which
is currently DYLD_LIBRARY_PATH).

ChangeLog:

	* configure: Regenerate.
	* configure.ac: Do not add default runpaths to GCC exes
	when we are building -static-libstdc++/-static-libgcc (the
	default).
	* libtool.m4: Add 'enable-darwin-at-runpath'.  Act  on the
	enable flag to alter Darwin libraries to use @rpath names.

gcc/ChangeLog:

	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.
	* config/darwin.h: Handle Darwin rpaths.
	* config/darwin.opt: Handle Darwin rpaths.
	* Makefile.in:  Handle Darwin rpaths.

gcc/ada/ChangeLog:

	* gcc-interface/Makefile.in: Handle Darwin rpaths.

gcc/jit/ChangeLog:
	* Make-lang.in: Handle Darwin rpaths.

libatomic/ChangeLog:

	* Makefile.am: Handle Darwin rpaths.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.

libbacktrace/ChangeLog:

	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.

libcc1/ChangeLog:

	* configure: Regenerate.

libffi/ChangeLog:

	* Makefile.am: Handle Darwin rpaths.
	* Makefile.in: Regenerate.
	* configure: Regenerate.

libgcc/ChangeLog:

	* config/t-slibgcc-darwin: Generate libgcc_s
	with an @rpath name.
	* config.host: Handle Darwin rpaths.

libgfortran/ChangeLog:

	* Makefile.am: Handle Darwin rpaths.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths

libgm2/ChangeLog:

	* Makefile.am: Handle Darwin rpaths.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.
	* libm2cor/Makefile.am: Handle Darwin rpaths.
	* libm2cor/Makefile.in: Regenerate.
	* libm2iso/Makefile.am: Handle Darwin rpaths.
	* libm2iso/Makefile.in: Regenerate.
	* libm2log/Makefile.am: Handle Darwin rpaths.
	* libm2log/Makefile.in: Regenerate.
	* libm2min/Makefile.am: Handle Darwin rpaths.
	* libm2min/Makefile.in: Regenerate.
	* libm2pim/Makefile.am: Handle Darwin rpaths.
	* libm2pim/Makefile.in: Regenerate.

libgomp/ChangeLog:

	* Makefile.am: Handle Darwin rpaths.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths

libitm/ChangeLog:

	* Makefile.am: Handle Darwin rpaths.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.

libobjc/ChangeLog:

	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.

libphobos/ChangeLog:

	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.
	* libdruntime/Makefile.am: Handle Darwin rpaths.
	* libdruntime/Makefile.in: Regenerate.
	* src/Makefile.am: Handle Darwin rpaths.
	* src/Makefile.in: Regenerate.

libquadmath/ChangeLog:

	* Makefile.am: Handle Darwin rpaths.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.

libsanitizer/ChangeLog:

	* asan/Makefile.am: Handle Darwin rpaths.
	* asan/Makefile.in: Regenerate.
	* configure: Regenerate.
	* hwasan/Makefile.am: Handle Darwin rpaths.
	* hwasan/Makefile.in: Regenerate.
	* lsan/Makefile.am: Handle Darwin rpaths.
	* lsan/Makefile.in: Regenerate.
	* tsan/Makefile.am: Handle Darwin rpaths.
	* tsan/Makefile.in: Regenerate.
	* ubsan/Makefile.am: Handle Darwin rpaths.
	* ubsan/Makefile.in: Regenerate.

libssp/ChangeLog:

	* Makefile.am: Handle Darwin rpaths.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.

libstdc++-v3/ChangeLog:

	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.
	* src/Makefile.am: Handle Darwin rpaths.
	* src/Makefile.in: Regenerate.

libvtv/ChangeLog:

	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.

lto-plugin/ChangeLog:
	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.

zlib/ChangeLog:
	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.

Provide means, in the form of a `--with-toolexeclibdir=' configuration
option, to override the default installation directory for target
libraries, otherwise known as $toolexeclibdir.  This is so that it is
possible to get newly-built libraries, particularly the shared ones,
installed in a common place, so that they can be readily used by the
target system as their host libraries, possibly over NFS, without a need
to manually copy them over from the currently hardcoded location they
would otherwise be installed in.

In the presence of the `--enable-version-specific-runtime-libs' option
and for configurations building native GCC the option is ignored.

	config/
	* toolexeclibdir.m4: New file.

	gcc/
	* doc/install.texi (Cross-Compiler-Specific Options): Document
	`--with-toolexeclibdir' option.

	libada/
	* Makefile.in (configure_deps): Add `toolexeclibdir.m4'.
	* configure.ac: Handle `--with-toolexeclibdir='.
	* configure: Regenerate.

	libatomic/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* testsuite/Makefile.in: Regenerate.

	libffi/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* include/Makefile.in: Regenerate.
	* man/Makefile.in: Regenerate.
	* testsuite/Makefile.in: Regenerate.

	libgcc/
	* Makefile.in (configure_deps): Add `toolexeclibdir.m4'.
	* configure.ac: Handle `--with-toolexeclibdir='.
	* configure: Regenerate.

	libgfortran/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

	libgomp/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* testsuite/Makefile.in: Regenerate.

	libhsail-rt/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

	libitm/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* testsuite/Makefile.in: Regenerate.

	libobjc/
	* Makefile.in (aclocal_deps): Add `toolexeclibdir.m4'.
	* aclocal.m4: Include `toolexeclibdir.m4'.
	* configure.ac: Handle `--with-toolexeclibdir='.
	* configure: Regenerate.

	liboffloadmic/
	* plugin/configure.ac: Handle `--with-toolexeclibdir='.
	* plugin/Makefile.in: Regenerate.
	* plugin/aclocal.m4: Regenerate.
	* plugin/configure: Regenerate.
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

	libphobos/
	* m4/druntime.m4: Handle `--with-toolexeclibdir='.
	* m4/Makefile.in: Regenerate.
	* libdruntime/Makefile.in: Regenerate.
	* src/Makefile.in: Regenerate.
	* testsuite/Makefile.in: Regenerate.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

	libquadmath/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

	libsanitizer/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* asan/Makefile.in: Regenerate.
	* interception/Makefile.in: Regenerate.
	* libbacktrace/Makefile.in: Regenerate.
	* lsan/Makefile.in: Regenerate.
	* sanitizer_common/Makefile.in: Regenerate.
	* tsan/Makefile.in: Regenerate.
	* ubsan/Makefile.in: Regenerate.

	libssp/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

	libstdc++-v3/
	* acinclude.m4: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* doc/Makefile.in: Regenerate.
	* include/Makefile.in: Regenerate.
	* libsupc++/Makefile.in: Regenerate.
	* po/Makefile.in: Regenerate.
	* python/Makefile.in: Regenerate.
	* src/Makefile.in: Regenerate.
	* src/c++11/Makefile.in: Regenerate.
	* src/c++17/Makefile.in: Regenerate.
	* src/c++98/Makefile.in: Regenerate.
	* src/filesystem/Makefile.in: Regenerate.
	* testsuite/Makefile.in: Regenerate.

	libvtv/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* testsuite/Makefile.in: Regenerate.

	zlib/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

This patch updates GCC to use autoconf 2.69 and automake 1.15.1.
(That's not the latest automake version, but it's the one used by
binutils-gdb, with which consistency is desirable, and in any case
seems a useful incremental update that should make a future update to
1.16.1 easier.)

The changes are generally similar to the binutils-gdb ones, and are
copied from there where shared files and directories are involved
(there are some further changes to such shared directories, however,
which I'd expect to apply to binutils-gdb once this patch is in GCC).
Largely, obsolete AC_PREREQ calls are removed, while many
AC_LANG_SOURCE calls are added to avoid warnings from aclocal and
autoconf.  Multilib support is no longer included in core automake,
meaning that multilib.am needs copying from automake's contrib
directory into the GCC source tree.  Autoconf 2.69 has Go support, so
local copies of that support are removed.  I hope the D support will
soon be submitted to upstream autoconf so the local copy of that can
be removed in a future update.  Changes to how automake generates
runtest calls mean quotes are removed from RUNTEST definitions in five
lib*/testsuite/Makefile.am files (libatomic, libgomp, libitm,
libphobos, libvtv; some others have RUNTEST definitions without
quotes, which are still OK); libgo and libphobos also get
-Wno-override added to AM_INIT_AUTOMAKE so those overrides of RUNTEST
do not generate automake warnings.

Note that the regeneration did not include regeneration of
fixincludes/config.h.in (attempting such regeneration resulted in all
the USED_FOR_TARGET conditionals disappearing; and I don't see
anything in the fixincludes/ directory that would result in such
conditionals being generated, unlike in the gcc/ directory).  Also
note that libvtv/testsuite/other-tests/Makefile.in was not
regenerated; that directory is not listed as a subdirectory for which
Makefile.in gets regenerated by calling "automake" in libvtv/, so I'm
not sure how it's meant to be regenerated.

While I mostly fixed warnings should running aclocal / automake /
autoconf, there were various such warnings from automake in the
libgfortran, libgo, libgomp, liboffloadmic, libsanitizer, libphobos
directories that I did not fix, preferring to leave those to the
relevant subsystem maintainers.  Specifically, most of those warnings
were of the following form (example from libgfortran):

Makefile.am:48: warning: source file 'caf/single.c' is in a subdirectory,
Makefile.am:48: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled.  For now, the corresponding output
automake: object file(s) will be placed in the top-level directory.  However,
automake: this behaviour will change in future Automake versions: they
will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.

I think it's best for the relevant maintainers to add subdir-objects
and do any other associated Makefile.am changes needed.  In some cases
the paths in the warnings involved ../; I don't know if that adds any
extra complications to the use of subdir-objects.

I've tested this with native, cross and Canadian cross builds.  The
risk of any OS-specific issues should I hope be rather lower than if a
libtool upgrade were included (we *should* do such an upgrade at some
point, but it's more complicated - it involves identifying all our
local libtool changes to see if any aren't included in the upstream
version we update to, and reverting an upstream libtool patch that's
inappropriate for use in GCC); I think it would be better to get this
update into GCC so that people can test in different configurations
and we can fix any issues found, rather than to try to get more and
more testing done before it goes in.

top level:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* multilib.am: New file.  From automake.

	Merge from binutils-gdb:
	2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>

	* libtool.m4: Use AC_LANG_SOURCE.
	* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
	* ar-lib: New file.
	* test-driver: New file.
	* configure: Re-generate.

config:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* math.m4, tls.m4: Use AC_LANG_SOURCE.

	Merge from binutils-gdb:
	2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>

	* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.

fixincludes:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.
	* aclocal.m4, configure: Regenerate.

gcc:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.  Use AC_LANG_SOURCE.  Use single
	line for second argument of AC_DEFINE_UNQUOTED.
	* doc/install.texi (Tools/packages necessary for modifying GCC):
	Update to autoconf 2.69 and automake 1.15.1.
	* aclocal.m4, config.in, configure: Regenerate.

gnattools:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.
	* configure: Regenerate.

gotools:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* config/go.m4: Remove file.
	* Makefile.am (ACLOCAL_AMFLAGS): Do not use -I ./config.
	* configure.ac:  Remove AC_PREREQ.  Do not include config/go.m4.
	* Makefile.in, aclocal.m4, configure: Regenerate.

intl:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	Merge from binutils-gdb:
	2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>

	* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
	* configure: Re-generate.
	* config.h.in: Re-generate.
	* aclocal.m4: Re-generate.

libada:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.
	* configure: Regenerate.

libatomic:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* acinclude.m4: Use AC_LANG_SOURCE.
	* configure.ac: Remove AC_PREREQ.
	* testsuite/Makefile.am (RUNTEST): Remove quotes.
	* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
	Regenerate.

libbacktrace:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* configure.ac: Remove AC_PREREQ.  Use AC_LANG_SOURCE.
	* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.

libcc1:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.
	* Makefile.in, aclocal.m4, configure: Regenerate.

libcpp:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.  Use AC_LANG_SOURCE.
	* aclocal.m4, config.in, configure: Regenerate.

libdecnumber:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	Merge from binutils-gdb:
	2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>

	* configure.ac: Remove AC_PREREQ.
	* configure: Re-generate.
	* aclocal.m4.

libffi:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	(AUTOMAKE_OPTIONS): Add info-in-builddir.
	(CLEANFILES): Remove doc/libffi.info.
	* configure.ac: Remove AC_PREREQ.
	* Makefile.in, aclocal.m4, configure, fficonfig.h.in,
	include/Makefile.in, man/Makefile.in, testsuite/Makefile.in:
	Regenerate.

libgcc:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.  Use AC_LANG_SOURCE.
	* configure: Regenerate.

libgfortran:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* configure.ac: Remove AC_PREREQ.
	* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.

libgo [logically part of this change but omitted from the commit]:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* config/go.m4: Remove file.
	* config/libtool.m4: Use AC_LANG_SOURCE.
	* configure.ac: Remove AC_PREREQ.  Use AC_LANG_SOURCE.  Use
	-Wno-override in AM_INIT_AUTOMAKE call.
	* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
	Regenerate.

libgomp:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am
	(AUTOMAKE_OPTIONS): Add info-in-builddir.
	(CLEANFILES): Remove libgomp.info.
	* configure.ac: Remove AC_PREREQ.
	* testsuite/Makefile.am (RUNTEST): Remove quotes.
	* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
	Regenerate.

libhsail-rt:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.
	* Makefile.in, aclocal.m4, configure: Regenerate.

libiberty:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	Merge from binutils-gdb:
	2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>

	* configure.ac: Remove AC_PREREQ.
	* configure: Re-generate.
	* config.in: Re-generate.

libitm:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	(AUTOMAKE_OPTIONS): Add info-in-builddir.
	(CLEANFILES): Remove libitm.info.
	* configure.ac: Remove AC_PREREQ.
	* testsuite/Makefile.am (RUNTEST): Remove quotes.
	* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
	Regenerate.

libobjc:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.
	* aclocal.m4, config.h.in, configure: Regenerate.

liboffloadmic:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* configure.ac: Remove AC_PREREQ.
	* plugin/Makefile.am: Include multilib.am.
	* plugin/configure.ac: Remove AC_PREREQ.
	* Makefile.in, aclocal.m4, configure, plugin/Makefile.in,
	plugin/aclocal.m4, plugin/configure: Regenerate.

libphobos:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* configure.ac: Remove AC_PREREQ.  Use -Wno-override in
	AM_INIT_AUTOMAKE call.
	* m4/autoconf.m4: Add extra argument to AC_LANG_DEFINE call.
	* m4/druntime/os.m4: Use AC_LANG_SOURCE.
	* testsuite/Makefile.am (RUNTEST): Remove quotes.
	* Makefile.in, aclocal.m4, configure, libdruntime/Makefile.in,
	src/Makefile.in, testsuite/Makefile.in: Regenerate.

libquadmath:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	(AUTOMAKE_OPTIONS): Remove 1.8.  Add info-in-builddir.
	(all-local): Define outside conditional code.
	(CLEANFILES): Remove libquadmath.info.
	* configure.ac: Remove AC_PREREQ.
	* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.

libsanitizer:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* configure.ac: Remove AC_PREREQ.  Use AC_LANG_SOURCE.
	* Makefile.in, aclocal.m4, asan/Makefile.in, configure,
	interception/Makefile.in, libbacktrace/Makefile.in,
	lsan/Makefile.in, sanitizer_common/Makefile.in, tsan/Makefile.in,
	ubsan/Makefile.in: Regenerate.

libssp:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	(AUTOMAKE_OPTIONS): Remove 1.9.5.
	* configure.ac: Remove AC_PREREQ.  Quote argument to
	AC_RUN_IFELSE.
	* Makefile.in, aclocal.m4, configure: Regenerate.

libstdc++-v3:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* configure.ac: Remove AC_PREREQ.
	* Makefile.in, aclocal.m4, configure, doc/Makefile.in,
	include/Makefile.in, libsupc++/Makefile.in, po/Makefile.in,
	python/Makefile.in, src/Makefile.in, src/c++11/Makefile.in,
	src/c++17/Makefile.in, src/c++98/Makefile.in,
	src/filesystem/Makefile.in, testsuite/Makefile.in: Regenerate.

libvtv:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* configure.ac: Remove AC_PREREQ.
	* testsuite/Makefile.am (RUNTEST): Remove quotes.
	* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
	Regenerate.

lto-plugin:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.  Use AC_LANG_SOURCE.
	* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.

zlib:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.

	Merge from binutils-gdb:
	2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>

	* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
	* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign.
	* Makefile.in: Re-generate.
	* aclocal.m4: Re-generate.
	* configure: Re-generate.

From-SVN: r265695

libvtv/
	* acinclude.m4: Add enable.m4 and cet.m4.
	* Makefile.in: Regenerate.
	* testsuite/Makefile.in: Likewise.
	* configure: Likewise.
	* configure.ac: Set CET_FLAGS. Update XCFLAGS.
	* testsuite/libvtv.cc/vtv.exp: Add scanlang.exp.

From-SVN: r254897

	PR other/79046
	* configure: Regenerated.
config/
	* acx.m4 (GCC_BASE_VER): New m4 function.
	(ACX_TOOL_DIRS): Require GCC_BASE_VER, for
	--with-gcc-major-version-only use just major number from BASE-VER.
gcc/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
	version from BASE-VER file.
	(CFLAGS-gcc.o): Add -DBASEVER=$(BASEVER_s).
	(gcc.o): Depend on $(BASEVER).
	* common.opt (dumpfullversion): New option.
	* gcc.c (driver_handle_option): Handle OPT_dumpfullversion.
	* doc/invoke.texi: Document -dumpfullversion.
	* doc/install.texi: Document --with-gcc-major-version-only.
	* configure: Regenerated.
libatomic/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* testsuite/Makefile.in: Regenerated.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libgomp/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* testsuite/Makefile.in: Regenerated.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libgcc/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
	version from BASE-VER file.
	* configure: Regenerated.
libssp/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
liboffloadmic/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* aclocal.m4: Include ../config/acx.m4.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libquadmath/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libmpx/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libada/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
	version from BASE-VER file.
	* configure: Regenerated.
lto-plugin/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libitm/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* testsuite/Makefile.in: Regenerated.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
fixincludes/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* configure: Regenerated.
libcilkrts/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* aclocal.m4: Include ../config/acx.m4.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libcc1/
	* configure.ac: Add GCC_BASE_VER.  For --with-gcc-major-version-only
	use just major number from BASE-VER.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libobjc/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* configure: Regenerated.
libstdc++-v3/
	* configure.ac: Add GCC_BASE_VER.
	* fragment.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* po/Makefile.in: Regenerated.
	* libsupc++/Makefile.in: Regenerated.
	* testsuite/Makefile.in: Regenerated.
	* src/Makefile.in: Regenerated.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
	* include/Makefile.in: Regenerated.
	* doc/Makefile.in: Regenerated.
	* python/Makefile.in: Regenerated.
	* src/c++11/Makefile.in: Regenerated.
	* src/c++98/Makefile.in: Regenerated.
	* src/filesystem/Makefile.in: Regenerated.
libvtv/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* testsuite/Makefile.in: Regenerated.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libsanitizer/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* libbacktrace/Makefile.in: Regenerated.
	* interception/Makefile.in: Regenerated.
	* asan/Makefile.in: Regenerated.
	* ubsan/Makefile.in: Regenerated.
	* configure: Regenerated.
	* sanitizer_common/Makefile.in: Regenerated.
	* lsan/Makefile.in: Regenerated.
	* Makefile.in: Regenerated.
	* tsan/Makefile.in: Regenerated.
libgfortran/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* configure: Regenerated.
	* Makefile.in: Regenerated.

From-SVN: r244521

2015-12-02  Matthias Klose  <doko@ubuntu.com>

        * configure.ac: Move AM_ENABLE_MULTILIB before
        GCC_LIBSTDCXX_RAW_CXX_FLAGS.
        * configure: Regenerate.

From-SVN: r231193

	libstdc++-v3:
	* acinclude.m4 (GLIBCXX_ENABLE_VTABLE_VERIFY) <solaris2*>: Use
	-Wl,-R in VTV_CXXLINKFLAGS.
	* configure: Regenerate.

	* testsuite/18_support/bad_exception/23591_thread-1.c: Use
	-fvtable-verify=none on Solaris 12+.

	libgcc:
	* Makefile.in (VTV_CFLAGS): New variable.
	(vtv_start$(objext), vtv_end$(objext), vtv_end$(objext))
	(vtv_start_preinit$(objext), vtv_end_preinit$(objext)): Use it.
	* config.host (*-*-solaris2*): Add t-crtstuff-pic to tmake_file.
	Add vtv_start.o, vtv_end.o, vtv_start_preinit.o, vtv_end_preinit.o
	to extra_parts if $enable_vtable_verify = yes.

	libvtv:
	* configure.tgt (*-*-solaris2.[1-9]*): Declare supported.
	* configure.ac: Call AC_USE_SYSTEM_EXTENSIONS.
	<*-*-solaris2*>: Check for init priority support.
	Check for getexecname, __fortify_fail, _obstack_begin.
	(VTV_NO_OBSTACK): New conditional.
	* configure: Regenerate.
	* Makefile.am [VTV_NO_OBSTACK] (obstack.c): Use new condition.
	Create empty config.h
	* Makefile.in: Regenerate.

	* vtv_rts.cc [HAVE_GETEXECNAME] (program_invocation_name): New
	variable.
	(read_section_offset_and_length) [HAVE_GETEXECNAME]: Set it.
	(dl_iterate_phdr_callback) [HAVE_GETEXECNAME]: Set it.

	(__fortify_fail): Wrap in HAVE___FORTIFY_FAIL
	[!HAVE___FORTIFY_FAIL]: Provide non-Cygwin implementation.

	(read_section_offset_and_length): Assert sh_size >= VTV_PAGE_SIZE.
	(iterate_modules): Fix typo.
	Use VTV_PAGE_SIZE.
	(dl_iterate_phdr_callback): Fix typo.
	Use VTV_PAGE_SIZE.
	(__VLTChangePermission): Fix typos.

	include:
	* vtv-change-permission.h (VTV_PAGE_SIZE) [__sun__ && __svr4__ &&
	__sparc__]: Define.

	gcc:
	* config/sol2.h (SUPPORTS_INIT_PRIORITY): Move up.
	(STARTFILE_VTV_SPEC, ENDFILE_VTV_SPEC): Define.
	(STARTFILE_SPEC): Use %(startfile_vtv).
	(ENDFILE_SPEC): Use %(endfile_vtv).
	(SUBTARGET_EXTRA_SPECS): Handle STARTFILE_VTV_SPEC,
	ENDFILE_VTV_SPEC.

	* gcc.c (LINK_COMMAND_SPEC): Move VTABLE_VERIFICATION_SPEC after %{L*}.

From-SVN: r230865

* gcc/config/i386/cygwin.h (STARTFILE_SPEC): Add vtv_start.o,
    if -fvtable-verify=preinit/std is used.
* gcc/config/i386/mingw-w64.h (STARTFILE_SPEC): Likewise.
* gcc/config/i386/mingw32.h (STARTFILE_SPEC): Likewise.
* gcc/config/i386/cygwin.h (ENDFILE_SPEC): Add vtv_end.o,
    if -fvtable-verify=preinit/std is used.
* gcc/config/i386/mingw32.h (ENDFILE_SPEC): Likewise.
* gcc/config/i386/cygwin.h (LIB_SPEC): Pass -lvtv and -lpsapi,
    if -fvtable-verify=preinit/std is used.
* gcc/config/i386/mingw-w64.h (LIB_SPEC): Likewise.
* gcc/config/i386/mingw32.h (LIB_SPEC): Likewise.

* gcc/cp/vtable-class-hierarchy.c (vtv_generate_init_routine): Add
    check for not TARGET_PECOFF at the VTV_PREINIT_PRIORITY checks.

* gcc/varasm.c (assemble_variable): Add code to properly set the comdat
    section and name for the .vtable_map_vars section in case the
    target is PE or COFF.


* libgcc/Makefile.in: Move rules to build vtv_*.o out of the check
    for CUSTOM_CRTSTUFF.
* libgcc/config.host (i[34567]86-*-cygwin*, x86_64-*-cygwin*, i[34567]86-*-mingw*)
    (x86_64-*-mingw*): Only add vtv_*.o to extra_parts if enable_vtable_verify.


* libstdc++-v3/acinclude.m4: Define VTV_CYGMIN.
* libstdc++-v3/configure: Regenerate.

* libstdc++-v3/libsupc++/Makefile.am: Add vtv_sources only to
    libsupc___la_SOURCES and libsupc__convenience_la_SOURCES if VTV_CYGMIN is
    not set.
* libstdc++-v3/libsupc++/Makefile.in: Regenerated.
* libstdc++-v3/libsupc++/vtv_stubs.cc: Add none weak declaration of every
    function for Cygwin and MinGW.

* libstdc++-v3/src/Makefile.am: Add libvtv.la to toolexeclib_LTLIBRARIES,
    if VTV_CYGMIN is set. Define libvtv_la_SOURCES, libvtv_la_LDFLAGS,
    libvtv_la_AM_CXXFLAGS and libvtv_la_LINK if VTV_CYGMIN is set.
* libstdc++-v3/src/Makefile.in: Regenerate.


* libvtv/Makefile.am : Add libvtv.la to toolexeclib_LTLIBRARIES, if VTV_CYGMIN
    is set. Define libvtv_la_LIBADD, libvtv_la_LDFLAGS, libvtv_stubs_la_LDFLAGS
    and libvtv_stubs_la_SOURCES if VTV_CYGMIN is set. Add obstac.c to
    libvtv_la_SOURCES if VTV_CYGMIN is set.
* libvtv/Makefile.in : Regenerate.
* libvtv/aclocal.m4 : Regenerate.
* libvtv/configure : Regenerate.
* libvtv/configure.ac : Add ACX_LT_HOST_FLAGS. Define VTV_CYGMIN.
* libvtv/configure.tgt : (x86_64-*-cygwin*, i?86-*-cygwin*, x86_64-*-mingw*)
    (i?86-*-mingw*): Add to supported targets.
* libvtv/vtv_fail.cc : Skip inclusion of execinfo.h on Cygwin and MinGW.
(log_error_message): Skip calls to backtrace and backtrace_symbols_fd on Cygwin
    and MinGW.
* libvtv/vtv_malloc.cc : Include windows.h and skip sys/mman.h inclusion on
    Cygwin and MinGW. Add sysconf port on Cygwin and MinGW.
(obstack_chunk_alloc): Exchange call to mmap with call to VirtualAlloc on Cygwin
    and MinGW.
(__vtv_malloc_init): Exchange call to sysconf with call to port of sysconf on
    Cygwin and MinGW.
* libvtv/vtv_malloc.h : Declare mprotect and define PROT_READ and PROT_WRITE on
    Cygwin and MinGW.
* libvtv/map.h : Include stdint.h on MinGW.
* libvtv/rts.cc : Include windows.h, winternl.h and psapi.h, skip include of
    execinfo.h, sys/mman.h and link.h on Cygwin and MinGW.
    Add port of __fortify_fail on Cygwin and MinGW.
    Change ElfW (Addr) to uintptr_t on Cygwin and MinGW.
(read_section_offset_and_length): Add port for Cygwin and MinGW
(iterate_modules): New function.
(vtv_unprotect_vtable_vars): Use iterate_modules instead of dl_iterate_phdr on
    Cygwin and MinGW.
(vtv_protect_vtable_vars): Likewise.
(count_all_pages): Likewise.
(dl_iterate_phdr_count_pages): Don't build on Cygwin and MinGW.
* libvtv/utils.cc : Include windows.h and skip execinfo.h inclusion on
    Cygwin and MinGW.
(__vtv_open_log): Exchange call to getuid and getpid with GetCurrentProcessId and
    adjust call to snprintf accordingly on Cygwin and MinGW.
    Adjust calls to mkdir on MinGW.
    Adjust call to open on Cygwin and MinGW.
(__vtv_add_to_log): Adjust call to snprintf on Cygwin and MinGW.
(__vtv_log_verification_failure): Don't generate a backtrace on Cygwin and MinGW.

From-SVN: r220232

when GCC was not configured with --enable-vtable-verify.

From-SVN: r202918

	PR other/58374
	* configure.ac: Move VTV_SUPPORTED check after AC_CANONICAL_SYSTEM.
	* configure: Regenerated.

From-SVN: r202470

--disable-vtable-verify and --disable-libvtv.  Also 
update configure and make files in libvtv not to use 
--enable-vtable-verify.

From-SVN: r202346

Fix logging to not use /tmp or the current directory; get
the location for writing log files from an environment
variable; use secure getenv whenever possible.

From-SVN: r201890

2013-08-07  Benjamin Kosnik  <bkoz@rehat.com>

	* Makefile.am (SUBDIRS): Protect with ENABLE_VTABLE_VERIFY.
	* Makefile.in: Regenerate.
	* acinclude.m4 (LIBVTV_CONFIGURE): Move parts to..
	* configure.ac: ...here. Make configure more verbose, re-order.
	* configure: Regenerate.

From-SVN: r201585

Commit the vtable verification feature.  This feature is designed to
detect, at run time, if/when the vtable pointer in a C++ object has
been corrupted, before allowing virtual calls through that pointer. 
If pointer corruption is detected, execution of the program is halted.

libstdc++-v3 ChangeLog:
2013-08-06  Caroline Tice  <cmtice@google.com>

        * fragment.am: Add XTEMPLATE_FLAGS.
        * configure.ac: Add definitions for --enable-vtable-verify.
        * acinclude.m4:  Add --enable-vtable-verify and
        --disable-vtable-verify; define --enable-vtable-verify; define
        VTV_CXXFLAGS, VTV_PCH_CXXFLAGS and VTV_CXXLINKFLAGS.
        * config/abi/pre/gnu.ver: Export symbols for vtable verification.
        * libsupc++/Makefile.am: Define vtv_sources and add it to
        libsupc___la_SOURCES and libsupc__convenience_la_SOURCES.
        * libsupc++/vtv_stubs.cc: New file.
        * include/Makefile.am: Add VTV_PCH_CXXFLAGS to PCHFLAGS.
        * src/Makefile.am: Add VTV_CXXFLAGS to AM_CXXFLAGS; add
        VTV_CXXLINKFLAGS to CXXLINK.
        * src/c++98/Makefile.am: Comment out XTEMPLATE_FLAGS; add VTV_CXXFLAGS
        to AM_CXXFLAGS; add VTV_CXXXLINKFLAGS to CXXLINK.
        * src/C++11/Makefile.am: Ditto.
        * doc/xml/manual/configure.xml: Add entry for --enable-vtable-verify.
        * scripts/testsuite_flags.in: Add cxxvtvflags to Usage; cause
        cxxvtvflags to use VTV_CXXFLAGS and VTV_CXXLINKFLAGS.
        * testsuite/lib/libstdc++.exp: Add cxxvtvflags; add code to locate
        libvtv if --enable-vtable-verify was used; set cxxvtvflags; add
        cxxvtvflags to cxx_final.
        * testsuite/18_support/bad_exception/23591_thread-1.c: Add
        -fvtable-verify=none to compiler flags.
        * testsuite/17_intro/freestanding.cc: Add -fvtable-verify=none
        to compiler flags.
        * configure: Regenerated.
        * Makefile.in: Regenerated.
        * python/Makefile.in: Regenerated.
        * include/Makefile.in: Regenerated.
        * libsupc++/Makefile.in: Regenerated.
        * config.h.in: Regenerated.
        * po/Makefile.in: Regenerated.
        * src/Makefile.in: Regenerated.
        * src/c++98/Makefile.in: Regenerated.
        * src/c++11/Makefile.in: Regenerated.
        * doc/Makefile.in: Regenerated.
        * testsuite/Makefile.in: Regenerated.

top level ChangeLog:
2013-08-06  Caroline Tice  <cmtice@google.com>

        * configure.ac: Add target-libvtv to target_libraries; disable libvtv
        on non-linux systems; add target-libvtv to noconfigdirs; add
        libsupc++/.libs to C++ library search paths.
        * configure: Regenerated.
        * Makefile.def: Add libvtv to target_modules; make libvtv depend on
        libstdc++ and libgcc.
        * Makefile.in: Regenerated.

include/ChangeLog:
2013-08-06  Caroline Tice  <cmtice@google.com>

        * vtv-change-permission.h: New file.

contrib/ChangeLog:
2013-08-06  Caroline Tice4  <cmtice@google.com>

        * gcc_update: Add libvtv files.

libgcc/ChangeLog:
2013-08-06  Caroline Tice  <cmtice@google.com>

        config.host (extra_parts): Add vtv_start.o, vtv_end.o
        vtv_start_preinit.o and vtv_end_preinit.o.
        configure.ac: Add code to check/set enable_vtable_verify.
        Makefile.in: Add rules to build vtv_*.o, if enable_vtable_verify is
        true.
        vtv_start_preinit.c: New file.
        vtv_end_preinit.c: New file.
        vtv_start.c: New file.
        vtv_end.c: New file.
        configure: Regenerated.

gcc/ChangeLog:
2013-08-06  Caroline Tice  <cmtice@google.com>

        * gcc.c (VTABLE_VERIFICATION_SPEC): New definition.
        (LINK_COMMAND_SPEC): Add VTABLE_VERIFICATION_SPEC.
        * tree-pass.h: Add pass_vtable_verify.
        * varasm.c (assemble_variable): Add code to properly set the comdat
        section and name for the .vtable_map_vars section.
        (assemble_vtyv_preinit_initializer): New function.
        (default_sectin_type_flags):  Make sure .vtable_map_vars section has
        LINK_ONCE flag.
        * output.h: Add function decl for assemble_vtv_preinit_initializer.
        * vtable-verify.c: New file.
        * vtable-verify.h: New file.
        * flag-types.h (enum vtv_priority): Defintions for flag_vtable_verify
        initialiation levels.
        * timevar.def (TV_VTABLE_VERIFICATION): New definition.
        * passes.def: Insert pass_vtable_verify.
        * aclocal.m4: Reorder includes.
        * doc/invoke.texi: Add documentation for the flags -fvtable-verify=,
	-fvtv-debug and -fvtv-counts.
        * config/gnu-user.h (GNU_USER_TARGET_STARTFILE_SPEC): Add vtv_start*.o,
as appropriate, if -fvtable-verify=... is used.
        (GNU_USER_TARGET_ENDFILE_SPEC): Add vtv_end*.o as appropriate, if
        -fvtable-verify=... is used.
        * Makefile.in (OBJS):  Add vtable-verify.o to list.
        (vtable-verify.o): Add new build rule.
        (GTFILES): Add vtable-verify.c to list.
        * common.opt (fvtable-verify=): New flag.
        (vtv_priority): Values for fvtable-verify= flag.
        (fvtv-counts): New flag.
(fvtv-debug): New flag.
        * tree.h (save_vtable_map_decl): New extern function decl.


gcc/cp/ChangeLog:
2013-08-06  Caroline Tice  <cmtice@google.com>

        * Make-lang.in (*CXX_AND_OBJCXX_OBJS):  Add vtable-class-hierarchy.o to
        list.
        (vtable-class-hierarchy.o): Add build rule.
        * cp-tree.h (vtv_start_verification_constructor_init_function): New
        extern function decl.
        (vtv_finish_verification_constructor_init_function): New extern
        function decl.
        (build_vtbl_address): New extern function decl.
        (get_mangled_vtable_map_var_name): New extern function decl.
        (vtv_compute_class_hierarchy_transitive_closure): New extern function
        decl.
        (vtv_generate_init_routine): New extern function decl.
        (vtv_save_class_info): New extern function decl.
        (vtv_recover_class_info): New extern function decl.
        (vtv_build_vtable_verify_fndecl): New extern function decl.
        * class.c (finish_struct_1): Add call to vtv_save_class_info if
        flag_vtable_verify is true.
        * config-lang.in: Add vtable-class-hierarchy.c to gtfiles list.
        * vtable-class-hierarchy.c: New file.
        * mangle.c (get_mangled_vtable_map_var_name):  New function.
        * decl2.c (start_objects): Update function comment.
        (cp_write_global_declarations): Call vtv_recover_class_info,
        vtv_compute_class_hierarchy_transitive_closure and
        vtv_build_vtable_verify_fndecl, before calling
        finalize_compilation_unit, and call vtv_generate_init_rount after, IFF
        flag_vtable_verify is true.
        (vtv_start_verification_constructor_init_function): New function.
        (vtv_finish_verification_constructor_init_function): New function.
        * init.c (build_vtbl_address): Remove static qualifier from function.

libvtv/ChangeLog:
2013-08-06  Caroline Tice  <cmtice@google.com>

        Initial check-in of new vtable verification feature.
        * configure.ac : New file.
        * acinclude.m4 : New file.
        * Makefile.am : New file.
        * aclocal.m4 : New file.
        * configure.tgt : New file.
        * configure: New file (generated).
        * Makefile.in: New file (generated).
        * vtv_set.h : New file.
        * vtv_utils.cc : New file.
        * vtv_utils.h : New file.
        * vtv_malloc.cc : New file.
        * vtv_rts.cc : New file.
        * vtv_malloc.h : New file.
        * vtv_rts.h : New file.
        * vtv_fail.cc : New file.
        * vtv_fail.h : New file.
        * vtv_map.h : New file.
        * scripts/run-testsuite.sh : New file.
        * scripts/sum-vtv-counts.c : New file.
        * testsuite/parts-test-main.h : New file.
        * testusite/dataentry.cc : New file.
        * testsuite/temp_deriv.cc : New file.
        * testsuite/register_pair.cc : New file.
        * testsuite/virtual_inheritance.cc : New file.
        * testsuite/field-test.cc : New file.
        * testsuite/nested_vcall_test.cc : New file.
        * testsuite/template-list-iostream.cc : New file.
        * testsuite/register_pair_inserts.cc : New file.
        * testsuite/register_pair_inserts_mt.cc : New file.
        * testsuite/event.list : New file.
        * testsuite/parts-test-extra-parts-views.cc : New file.
        * testsuite/parts-test-extra-parts-views.h : New file.
        * testsuite/environment-fail-32.s : New file.
        * testsuite/parts-test-extra-parts.h : New file.
        * testsuite/temp_deriv2.cc : New file.
        * testsuite/dlopen_mt.cc : New file.
        * testsuite/event.h : New file.
        * testsuite/template-list.cc : New file.
        * testsuite/replace-fail.cc : New file.
        * testsuite/Makefile.am : New file.
        * testsuite/Makefile.in: New file (generated).
        * testsuite/mempool_negative.c : New file.
        * testsuite/parts-test-main.cc : New file.
        * testsuite/event-private.cc : New file.
        * testsuite/thunk.cc : New file.
        * testsuite/event-defintiions.cc : New file.
        * testsuite/event-private.h : New file.
        * testsuite/parts-test.list : New file.
        * testusite/register_pair_mt.cc : New file.
        * testsuite/povray-derived.cc : New file.
        * testsuite/event-main.cc : New file.
        * testsuite/environment.cc : New file.
        * testsuite/template-list2.cc : New file.
        * testsuite/thunk_vtable_map_attack.cc : New file.
        * testsuite/parts-test-extra-parts.cc : New file.
        * testsuite/environment-fail-64.s : New file.
        * testsuite/dlopen.cc : New file.
        * testsuite/so.cc : New file.
        * testsuite/temp_deriv3.cc : New file.
        * testsuite/const_vtable.cc : New file.
        * testsuite/mempool_positive.c : New file.
        * testsuite/dup_name.cc : New file.

From-SVN: r201555

re PR other/43620 ([4.3 Release Blocker] Uploading to gnu.org will fail due to automake security issue)

	PR other/43620
	* configure.ac (AM_INIT_AUTOMAKE): Add no-dist.
	* Makefile.in: Regenerated.
	* asan/Makefile.in: Regenerated.
	* interception/Makefile.in: Regenerated.
	* sanitizer_common/Makefile.in: Regenerated.
	* tsan/Makefile.in: Regenerated.

From-SVN: r196964

config/

	PR sanitizer/55533
	* libstdc++-raw-cxx.m4: New file.

libsanitizer/

	PR sanitizer/55533
	* Makefile.am (AM_MAKEFLAGS): Remove CC and CXX.
	* configure.ac (GCC_LIBSTDCXX_RAW_CXX_FLAGS): New.
	* asan/Makefile.am (AM_CXXFLAGS): Add $(LIBSTDCXX_RAW_CXX_CXXFLAGS).
	(AM_MAKEFLAGS): Remove CC and CXX.
	* interception/Makefile.am: Likewise.
	* sanitizer_common/Makefile.am: Likewise.
	* tsan/Makefile.am: Likewise.
	* Makefile.in: Regenerated.
	* aclocal.m4: Likewise.
	* configure: Likewise.
	* asan/Makefile.in: Likewise.
	* interception/Makefile.in: Likewise.
	* sanitizer_common/Makefile.in: Likewise.
	* tsan/Makefile.in: Likewise.

From-SVN: r194424

From-SVN: r194257

[libsanitizer] Fix PR55521 by switching libsanitizer from mach_override to mac interpose functions on darwin

From-SVN: r194120

	* Makefile.am (AM_MAKEFLAGS): Restore CC and CXX.
	* configure.ac (ACX_NONCANONICAL_TARGET): Removed.
	* asan/Makefile.am (AM_CXXFLAGS): Remove -I for libstdc++-v3 header
	files.
	(AM_MAKEFLAGS): Restore CC and CXX.
	* interception/Makefile.am: Likewise.
	* sanitizer_common/Makefile.am: Likewise.
	* tsan/Makefile.am: Likewise.
	* Makefile.in: Regenerated.
	* aclocal.m4: Likewise.
	* configure: Likewise.
	* asan/Makefile.in: Likewise.
	* interception/Makefile.in: Likewise.
	* sanitizer_common/Makefile.in: Likewise.
	* tsan/Makefile.in: Likewise.

From-SVN: r193951

	* Makefile.am (AM_MAKEFLAGS): Remove CC and CXX.
	* configure.ac (ACX_NONCANONICAL_TARGET): New.
	* asan/Makefile.am (AM_CXXFLAGS): Add -I for libstdc++-v3 header
	files.
	(AM_MAKEFLAGS): Remove CC and CXX.
	* interception/Makefile.am: Likewise.
	* sanitizer_common/Makefile.am: Likewise.
	* tsan/Makefile.am: Likewise.
	* Makefile.in: Regenerated.
	* aclocal.m4: Likewise.
	* configure: Likewise.
	* asan/Makefile.in: Likewise.
	* interception/Makefile.in: Likewise.
	* sanitizer_common/Makefile.in: Likewise.
	* tsan/Makefile.in: Likewise.

From-SVN: r193949

From-SVN: r193781

	* tsan/Makefile.am (AM_CXXFLAGS): Remove -Wno-variadic-macros.
	* Makefile.am (SUBDIRS): Guard tsan addition with TSAN_SUPPORTED
	automake conditional instead of !MULTISUBDIR32.
	* configure.tgt: Set TSAN_SUPPORTED=yes for x86_64/i686-linux
	for 64-bit multilib.
	* configure.ac: Check for void * size, source in configure.tgt,
	define TSAN_SUPPORTED conditional instead of MULTILIBDIR32.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
	* tsan/Makefile.in: Regenerated.

From-SVN: r193741

libsanitizer/
	* tsan: New directory. Import tsan runtime from llvm.
	* configure.ac: Add 64 bits tsan build.
	* Makefile.am: Likewise.
	* configure: Regenerated.
	* Makefile.in: Likewise.

From-SVN: r193737

	* configure.ac: Invoke AM_MAINTAINER_MODE.
	* aclocal.m4, configure, Makefile.in, asan/Makefile.in,
	interception/Makefile.in, sanitizer_common/Makefile.in: Rebuild.

From-SVN: r193561

	* configure.ac: Properly set MULTISUBDIR.
	* asan/Makefile.am (gcc_version): New.
	* interception/Makefile.am (gcc_version): Likewise.
	* sanitizer_common/Makefile.am (gcc_version): Likewise.
	* configure: Regenerated.
	* asan/Makefile.in: Likewise.
	* interception/Makefile.in: Likewise.
	* sanitizer_common/Makefile.in: Likewise.

From-SVN: r193534

	PR other/55291
	* configure.ac (--enable-version-specific-runtime-libs): New option.
	(AC_CANONICAL_SYSTEM): New.
	(AM_ENABLE_MULTILIB): Moved right after AM_INIT_AUTOMAKE.
	(toolexecdir): Support multilib.
	(toolexeclibdir): Likewise.
	(multilib_arg): New.
	* Makefile.in: Regenerated.
	* aclocal.m4: Likewise.
	* configure: Likewise.
	* asan/Makefile.in: Likewise.
	* interception/Makefile.in: Likewise.
	* sanitizer_common/Makefile.in: Likewise.

From-SVN: r193516

	* configure.ac (AC_CONFIG_AUX_DIR): Removed.
	* Makefile.in: Regenerated.
	* configure: Likewise.

From-SVN: r193499

	PR other/55304
	* acinclude.m4: New file.
	* Makefile.am (ACLOCAL_AMFLAGS): New.
	* configure.ac (AC_PREREQ): Set to 2.64.
	(AC_CONFIG_AUX_DIR): Set to "..".
	* Makefile.in: Regenerated.
	* aclocal.m4: Likewise.
	* configure: Likewise.
	* asan/Makefile.in: Likewise.
	* interception/Makefile.in: Likewise.
	* sanitizer_common/Makefile.in: Likewise.

	* config.guess: Removed.
	* config.sub: Likewise.
	* depcomp: Likewise.
	* install-sh: Likewise.
	* ltmain.sh: Likewise.
	* missing: Likewise.

From-SVN: r193491

This patch imports the runtime library in the GCC tree, ensures that
-lasan is passed to the linker when -faddress-sanitizer is used and
sets up the build system accordingly.

ChangeLog:

	* configure.ac: Add libsanitizer to target_libraries.
	* Makefile.def: Ditto.
	* configure: Regenerate.
	* Makefile.in: Regenerate.
	* libsanitizer: New directory for asan runtime.  Contains an empty
	tsan directory.

gcc/ChangeLog:

	* gcc.c (LINK_COMMAND_SPEC): Add -laddress-sanitizer to link
	command if -faddress-sanitizer is on.

libsanitizer:

	Initial checkin: migrate asan runtime from llvm.

From-SVN: r193441