This reports common symbols like GNU nm, via a type code of 'C'.

ChangeLog:

	* libtool.m4 (lt_cv_sys_global_symbol_pipe): Augment symcode for
	Solaris 11.

gcc/ChangeLog:

	* configure: Regenerate.

libatomic/ChangeLog:

	* configure: Regenerate.

libbacktrace/ChangeLog:

	* configure: Regenerate.

libcc1/ChangeLog:

	* configure: Regenerate.

libffi/ChangeLog:

	* configure: Regenerate.

libgfortran/ChangeLog:

	* configure: Regenerate.

libgm2/ChangeLog:

	* configure: Regenerate.

libgomp/ChangeLog:

	* configure: Regenerate.

libitm/ChangeLog:

	* configure: Regenerate.

libobjc/ChangeLog:

	* configure: Regenerate.

libphobos/ChangeLog:

	* configure: Regenerate.

libquadmath/ChangeLog:

	* configure: Regenerate.

libsanitizer/ChangeLog:

	* configure: Regenerate.

libssp/ChangeLog:

	* configure: Regenerate.

libstdc++-v3/ChangeLog:

	* configure: Regenerate.

libvtv/ChangeLog:

	* configure: Regenerate.

lto-plugin/ChangeLog:

	* configure: Regenerate.

zlib/ChangeLog:

	* configure: Regenerate.

These are the os support patches we have been grooming and maintaining
for quite a few years over on git.haiku-os.org.  All of these
architectures are working and most have been stable for quite some time.

ChangeLog:

	* configure: Regenerate.
	* configure.ac: Add Haiku to list of ELF OSes
	* libtool.m4: Update sys_lib_dlsearch_path_spec on Haiku.

gcc/ChangeLog:

	* configure: Regenerate.

libatomic/ChangeLog:

	* configure: Regenerate.

libbacktrace/ChangeLog:

	* configure: Regenerate.

libcc1/ChangeLog:

	* configure: Regenerate.

libffi/ChangeLog:

	* configure: Regenerate.

libgfortran/ChangeLog:

	* configure: Regenerate.

libgm2/ChangeLog:

	* configure: Regenerate.

libgomp/ChangeLog:

	* configure: Regenerate.

libitm/ChangeLog:

	* configure: Regenerate.

libobjc/ChangeLog:

	* configure: Regenerate.

libphobos/ChangeLog:

	* configure: Regenerate.

libquadmath/ChangeLog:

	* configure: Regenerate.

libsanitizer/ChangeLog:

	* configure: Regenerate.

libssp/ChangeLog:

	* configure: Regenerate.

libstdc++-v3/ChangeLog:

	* configure: Regenerate.

libvtv/ChangeLog:

	* configure: Regenerate.

lto-plugin/ChangeLog:

	* configure: Regenerate.

zlib/ChangeLog:

	* configure: Regenerate.

My previous nm patch handled all cases but one -- if the user set NM in
the environment to a path which contained an option, libtool's nm
detection tries to run nm against a copy of nm with the options in it:
e.g. if NM was set to "nm --blargle", and nm was found in /usr/bin, the
test would try to run "/usr/bin/nm --blargle /usr/bin/nm --blargle".
This is unlikely to be desirable: in this case we should run
"/usr/bin/nm --blargle /usr/bin/nm".

Furthermore, as part of this nm has to detect when the passed-in $NM
contains a path, and in that case avoid doing a path search itself.
This too was thrown off if an option contained something that looked
like a path, e.g. NM="nm -B../prev-gcc"; libtool then tries to run
"nm -B../prev-gcc nm" which rarely works well (and indeed it looks
to see whether that nm exists, finds it doesn't, and wrongly concludes
that nm -p or whatever does not work).

Fix all of these by clipping all options (defined as everything
including and after the first " -") before deciding whether nm
contains a path (but not using the clipped value for anything else),
and then removing all options from the path-modified nm before
looking to see whether that nm existed.

NM=my-nm now does a path search and runs e.g.
  /usr/bin/my-nm -B /usr/bin/my-nm

NM=/usr/bin/my-nm now avoids a path search and runs e.g.
  /usr/bin/my-nm -B /usr/bin/my-nm

NM="my-nm -p../wombat" now does a path search and runs e.g.
  /usr/bin/my-nm -p../wombat -B /usr/bin/my-nm

NM="../prev-binutils/new-nm -B../prev-gcc" now avoids a path search:
  ../prev-binutils/my-nm -B../prev-gcc -B ../prev-binutils/my-nm

This seems to be all combinations, including those used by GCC bootstrap
(which, before this commit, fails to bootstrap when configured
--with-build-config=bootstrap-lto, because the lto plugin is now using
--export-symbols-regex, which requires libtool to find a working nm,
while also using -B../prev-gcc to point at the lto plugin associated
with the GCC just built.)

Regenerate all affected configure scripts.

ChangeLog:

	* libtool.m4 (LT_PATH_NM): Handle user-specified NM with
	options, including options containing paths.

gcc/ChangeLog:

	* configure: Regenerate.

libatomic/ChangeLog:

	* configure: Regenerate.

libbacktrace/ChangeLog:

	* configure: Regenerate.

libcc1/ChangeLog:

	* configure: Regenerate.

libffi/ChangeLog:

	* configure: Regenerate.

libgfortran/ChangeLog:

	* configure: Regenerate.

libgm2/ChangeLog:

	* configure: Regenerate.

libgomp/ChangeLog:

	* configure: Regenerate.

libitm/ChangeLog:

	* configure: Regenerate.

libobjc/ChangeLog:

	* configure: Regenerate.

libphobos/ChangeLog:

	* configure: Regenerate.

libquadmath/ChangeLog:

	* configure: Regenerate.

libsanitizer/ChangeLog:

	* configure: Regenerate.

libssp/ChangeLog:

	* configure: Regenerate.

libstdc++-v3/ChangeLog:

	* configure: Regenerate.

libvtv/ChangeLog:

	* configure: Regenerate.

lto-plugin/ChangeLog:

	* configure: Regenerate.

zlib/ChangeLog:

	* configure: Regenerate.

Libtool needs to get BSD-format (or MS-format) output out of the system
nm, so that it can scan generated object files for symbol names for
-export-symbols-regex support.  Some nms need specific flags to turn on
BSD-formatted output, so libtool checks for this in its AC_PATH_NM.
Unfortunately the code to do this has a pair of interlocking flaws:

 - it runs the test by doing an nm of /dev/null.  Some platforms
   reasonably refuse to do an nm on a device file, but before now this
   has only been worked around by assuming that the error message has a
   specific textual form emitted by Tru64 nm, and that getting this
   error means this is Tru64 nm and that nm -B would work to produce
   BSD-format output, even though the test never actually got anything
   but an error message out of nm -B.  This is fixable by nm'ing *nm
   itself* (since we necessarily have a path to it).

 - the test is entirely skipped if NM is set in the environment, on the
   grounds that the user has overridden the test: but the user cannot
   reasonably be expected to know that libtool wants not only nm but
   also flags forcing BSD-format output.  Worse yet, one such "user" is
   the top-level Cygnus configure script, which neither tests for
   nor specifies any BSD-format flags.  So platforms needing BSD-format
   flags always fail to set them when run in a Cygnus tree, breaking
   -export-symbols-regex on such platforms.  Libtool also needs to
   augment $LD on some platforms, but this is done unconditionally,
   augmenting whatever the user specified: the nm check should do the
   same.

   One wrinkle: if the user has overridden $NM, a path might have been
   provided: so we use the user-specified path if there was one, and
   otherwise do the path search as usual.  (If the nm specified doesn't
   work, this might lead to a few extra pointless path searches -- but
   the test is going to fail anyway, so that's not a problem.)

(Tested with NM unset, and set to nm, /usr/bin/nm, my-nm where my-nm is a
symlink to /usr/bin/nm on the PATH, and /not-on-the-path/my-nm where
*that* is a symlink to /usr/bin/nm.)

ChangeLog:

	* libtool.m4 (LT_PATH_NM): Try BSDization flags with a user-provided
	NM, if there is one.  Run nm on itself, not on /dev/null, to avoid
	errors from nms that refuse to work on non-regular files.  Remove
	other workarounds for this problem.  Strip out blank lines from the
	nm output.

fixincludes/ChangeLog:

	* configure: Regenerate.

gcc/ChangeLog:

	* configure: Regenerate.

libatomic/ChangeLog:

	* configure: Regenerate.

libbacktrace/ChangeLog:

	* configure: Regenerate.

libcc1/ChangeLog:

	* configure: Regenerate.

libffi/ChangeLog:

	* configure: Regenerate.

libgfortran/ChangeLog:

	* configure: Regenerate.

libgm2/ChangeLog:

	* configure: Regenerate.

libgomp/ChangeLog:

	* configure: Regenerate.

libitm/ChangeLog:

	* configure: Regenerate.

libobjc/ChangeLog:

	* configure: Regenerate.

libphobos/ChangeLog:

	* configure: Regenerate.

libquadmath/ChangeLog:

	* configure: Regenerate.

libsanitizer/ChangeLog:

	* configure: Regenerate.

libssp/ChangeLog:

	* configure: Regenerate.

libstdc++-v3/ChangeLog:

	* configure: Regenerate.

libvtv/ChangeLog:

	* configure: Regenerate.

lto-plugin/ChangeLog:

	* configure: Regenerate.

zlib/ChangeLog:

	* configure: Regenerate.

AR from older binutils doesn't work with --plugin and rc:

[hjl@gnu-cfl-2 bin]$ touch foo.c
[hjl@gnu-cfl-2 bin]$ ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c
[hjl@gnu-cfl-2 bin]$ ./ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c
./ar: no operation specified
[hjl@gnu-cfl-2 bin]$ ./ar --version
GNU ar (Linux/GNU Binutils) 2.29.51.0.1.20180112
Copyright (C) 2018 Free Software Foundation, Inc.
This program is free software; you may redistribute it under the terms of
the GNU General Public License version 3 or (at your option) any later version.
This program has absolutely no warranty.
[hjl@gnu-cfl-2 bin]$

Check if AR works with --plugin and rc before passing --plugin to AR and
RANLIB.

ChangeLog:

	* configure: Regenerated.
	* libtool.m4 (_LT_CMD_OLD_ARCHIVE): Check if AR works with
	--plugin and rc before enabling --plugin.

config/ChangeLog:

	* gcc-plugin.m4 (GCC_PLUGIN_OPTION): Check if AR works with
	--plugin and rc before enabling --plugin.

gcc/ChangeLog:

	* configure: Regenerate.

libatomic/ChangeLog:

	* configure: Regenerate.

libbacktrace/ChangeLog:

	* configure: Regenerate.

libcc1/ChangeLog:

	* configure: Regenerate.

libffi/ChangeLog:

	* configure: Regenerate.

libgfortran/ChangeLog:

	* configure: Regenerate.

libgm2/ChangeLog:

	* configure: Regenerate.

libgomp/ChangeLog:

	* configure: Regenerate.

libiberty/ChangeLog:

	* configure: Regenerate.

libitm/ChangeLog:

	* configure: Regenerate.

libobjc/ChangeLog:

	* configure: Regenerate.

libphobos/ChangeLog:

	* configure: Regenerate.

libquadmath/ChangeLog:

	* configure: Regenerate.

libsanitizer/ChangeLog:

	* configure: Regenerate.

libssp/ChangeLog:

	* configure: Regenerate.

libstdc++-v3/ChangeLog:

	* configure: Regenerate.

libvtv/ChangeLog:

	* configure: Regenerate.

lto-plugin/ChangeLog:

	* configure: Regenerate.

zlib/ChangeLog:

	* configure: Regenerate.

Sync with binutils for building binutils with LTO:

50ad1254d50 GCC: Pass --plugin to AR and RANLIB

Detect GCC LTO plugin.  Pass --plugin to AR and RANLIB to support LTO
build.

ChangeLog:

	* Makefile.tpl (AR): Add @AR_PLUGIN_OPTION@
	(RANLIB): Add @RANLIB_PLUGIN_OPTION@.
	* configure.ac: Include config/gcc-plugin.m4.
	AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION.
	* libtool.m4 (_LT_CMD_OLD_ARCHIVE): Pass --plugin to AR and
	RANLIB if possible.
	* Makefile.in: Regenerated.
	* configure: Likewise.

config/ChangeLog:

	* gcc-plugin.m4 (GCC_PLUGIN_OPTION): New.

libiberty/ChangeLog:

	* Makefile.in (AR): Add @AR_PLUGIN_OPTION@
	(RANLIB): Add @RANLIB_PLUGIN_OPTION@.
	(configure_deps): Depend on ../config/gcc-plugin.m4.
	* configure.ac: AC_SUBST AR_PLUGIN_OPTION and
	RANLIB_PLUGIN_OPTION.
	* aclocal.m4: Regenerated.
	* configure: Likewise.

zlib/ChangeLog:

	* configure: Regenerated.

gcc/ChangeLog:

	* configure: Regenerate.

libatomic/ChangeLog:

	* configure: Regenerate.

libbacktrace/ChangeLog:

	* configure: Regenerate.

libcc1/ChangeLog:

	* configure: Regenerate.

libffi/ChangeLog:

	* configure: Regenerate.

libgfortran/ChangeLog:

	* configure: Regenerate.

libgm2/ChangeLog:

	* configure: Regenerate.

libgomp/ChangeLog:

	* configure: Regenerate.

libitm/ChangeLog:

	* configure: Regenerate.

libobjc/ChangeLog:

	* configure: Regenerate.

libphobos/ChangeLog:

	* configure: Regenerate.

libquadmath/ChangeLog:

	* configure: Regenerate.

libsanitizer/ChangeLog:

	* configure: Regenerate.

libssp/ChangeLog:

	* configure: Regenerate.

libstdc++-v3/ChangeLog:

	* configure: Regenerate.

libvtv/ChangeLog:

	* configure: Regenerate.

lto-plugin/ChangeLog:

	* configure: Regenerate.

So the problem here is EXPAND_INTER_MACRO_16 expands to nothing if 16 byte FP does not
exist but we still add a comma after it and that causes a build failure.
The same is true for EXPAND_INTER_MACRO_10 too.

Committed as obvious after a bootstrap and test on x86_64-linux-gnu and aarch64-linux-gnu.

libgfortran/ChangeLog:

	PR libfortran/110759
	* ieee/ieee_arithmetic.F90
	(COMP_INTERFACE): Remove the comma after EXPAND_INTER_MACRO_16
	and EXPAND_INTER_MACRO_10.
	(EXPAND_INTER_MACRO_16): Add comma here if 16 byte fp exist.
	(EXPAND_INTER_MACRO_10): Likewise.

Those operations were added to Fortran 2018, and correspond to
well-defined IEEE comparison operations, with defined signaling
semantics for NaNs. All are implemented in terms of GCC expressions and
built-ins, with no library support needed.

gcc/fortran/

	* f95-lang.cc (gfc_init_builtin_functions): Add __builtin_iseqsig.
	* trans-intrinsic.cc (conv_intrinsic_ieee_comparison): New
	function.
	(gfc_conv_ieee_arithmetic_function): Handle IEEE comparisons.

gcc/testsuite/

	* gfortran.dg/ieee/comparisons_1.f90: New test.
	* gfortran.dg/ieee/comparisons_2.f90: New test.
	* gfortran.dg/ieee/comparisons_3.F90: New test.

libgfortran/
	* ieee/ieee_arithmetic.F90: Add IEEE_QUIET_* and
	IEEE_SIGNALING_* functions.

libgfortran/

	PR libfortran/109373
	* configure.ac: Remove support for --enable-intermodule
	* Makefile.am: Remove onestep path.
	* configure: Regenerate.
	* Makefile.in: Regenerate.

libgfortran/

	* ieee/ieee_arithmetic.F90: Add IEEE_MIN_NUM, IEEE_MAX_NUM,
	IEEE_MIN_NUM_MAG, and IEEE_MAX_NUM_MAG functions.

gcc/fortran/

	* f95-lang.cc (gfc_init_builtin_functions): Add fmax() and
	fmin() built-ins, and their variants.
	* mathbuiltins.def: Add FMAX and FMIN built-ins.
	* trans-intrinsic.cc (conv_intrinsic_ieee_minmax): New function.
	(gfc_conv_ieee_arithmetic_function): Handle IEEE_MIN_NUM and
	IEEE_MAX_NUM functions.

gcc/testsuite/
	* gfortran.dg/ieee/minmax_1.f90: New test.

	PR fortran/109662

libgfortran/ChangeLog:

	* io/unit.c (set_internal_unit): Set the internal unit
	last_char to zero so that previous EOF characters do not
	influence the next read.

Fix coding-style errors introduced in ca2f64d5

gcc/fortran/ChangeLog:

	* resolve.cc (resolve_select_type): Fix coding style.

libgfortran/ChangeLog:

	* caf/single.c (_gfortran_caf_register): Fix coding style.
	* io/async.c (update_pdt, async_io): Likewise.
	* io/format.c (free_format_data): Likewise.
	* io/transfer.c (st_read_done_worker, st_write_done_worker): Likewise.
	* io/unix.c (mem_close): Likewise.

gcc/fortran/ChangeLog:

	* resolve.cc (resolve_select_type): Call free() unconditionally.

libgfortran/ChangeLog:

	* caf/single.c (_gfortran_caf_register): Call free() unconditionally.
	* io/async.c (update_pdt, async_io): Likewise.
	* io/format.c (free_format_data): Likewise.
	* io/transfer.c (st_read_done_worker, st_write_done_worker): Likewise.
	* io/unix.c (mem_close): Likewise.

	PR fortran/109662

libgfortran/ChangeLog:

	* io/list_read.c: Add check for a semicolon after a namelist
	name in read input. Issue a runtime error message.

gcc/testsuite/ChangeLog:

	* gfortran.dg/pr109662-a.f90: New test.

	PR fortran/109662

libgfortran/ChangeLog:

	* io/list_read.c: Add a check for a comma after a namelist
	name in read input. Issue a runtime error message.

gcc/testsuite/ChangeLog:

	* gfortran.dg/pr109662.f90: New test.

Set sstride[0] and mstride[0] to zero, eliminating some warnings.

libgfortran/ChangeLog:

	* generated/pack_c10.c (pack_c10): Regenerated.
	* generated/pack_c16.c (pack_c16): Regenerated.
	* generated/pack_c17.c (pack_c17): Regenerated.
	* generated/pack_c4.c (pack_c4): Regenerated.
	* generated/pack_c8.c (pack_c8): Regenerated.
	* generated/pack_i1.c (pack_i1): Regenerated.
	* generated/pack_i16.c (pack_i16): Regenerated.
	* generated/pack_i2.c (pack_i2): Regenerated.
	* generated/pack_i4.c (pack_i4): Regenerated.
	* generated/pack_i8.c (pack_i8): Regenerated.
	* generated/pack_r10.c (pack_r10): Regenerated.
	* generated/pack_r16.c (pack_r16): Regenerated.
	* generated/pack_r17.c (pack_r17): Regenerated.
	* generated/pack_r4.c (pack_r4): Regenerated.
	* generated/pack_r8.c (pack_r8): Regenerated.
	* generated/spread_c10.c (spread_c10): Regenerated.
	* generated/spread_c16.c (spread_c16): Regenerated.
	* generated/spread_c17.c (spread_c17): Regenerated.
	* generated/spread_c4.c (spread_c4): Regenerated.
	* generated/spread_c8.c (spread_c8): Regenerated.
	* generated/spread_i1.c (spread_i1): Regenerated.
	* generated/spread_i16.c (spread_i16): Regenerated.
	* generated/spread_i2.c (spread_i2): Regenerated.
	* generated/spread_i4.c (spread_i4): Regenerated.
	* generated/spread_i8.c (spread_i8): Regenerated.
	* generated/spread_r10.c (spread_r10): Regenerated.
	* generated/spread_r16.c (spread_r16): Regenerated.
	* generated/spread_r17.c (spread_r17): Regenerated.
	* generated/spread_r4.c (spread_r4): Regenerated.
	* generated/spread_r8.c (spread_r8): Regenerated.
	* intrinsics/execute_command_line.c (execute_command_line_i4),
	(execute_command_line_i8): Set estat_initial to zero.
	* intrinsics/pack_generic.c (pack_internal): Set sstride[0] and
	mstride[0] to zero.
	* intrinsics/spread_generic.c (spread_internal): Set sstride[0].
	* m4/pack.m4: Set sstride[0] and mstride[0].
	* m4/spread.m4: Set sstride[0].

On Windows, 'system' is called - that fails with -1 if the command
interpreter could not be started; on POSIX systems, if the child
process could not be started by the shell, exit(127)/_exit(127) is
called/returned. On Windows, cmd.exe (and also the PowerShell) return
errorlevel 9009.

libgfortran/ChangeLog:

	* intrinsics/execute_command_line.c (execute_command_line): On
	Windows, regard system()'s return value of 9009 as EXEC_INVALIDCOMMAND.

Recently, mingw-w64 has got updated <msxml.h> from Wine which is included
indirectly by <windows.h> if `WIN32_LEAN_AND_MEAN` is not defined. The
`IXMLDOMDocument` class has a member function named `abort()`, which gets
affected by our `abort()` macro in "system.h".

`WIN32_LEAN_AND_MEAN` should, nevertheless, always be defined. This
can exclude 'APIs such as Cryptography, DDE, RPC, Shell, and Windows
Sockets' [1], and speed up compilation of these files a bit.

[1] https://learn.microsoft.com/en-us/windows/win32/winprog/using-the-windows-headers

gcc/

	PR middle-end/108300
	* config/xtensa/xtensa-dynconfig.c: Define `WIN32_LEAN_AND_MEAN`
	before <windows.h>.
	* diagnostic-color.cc: Likewise.
	* plugin.cc: Likewise.
	* prefix.cc: Likewise.

gcc/ada/

	PR middle-end/108300
	* adaint.c: Define `WIN32_LEAN_AND_MEAN` before `#include
	<windows.h>`.
	* cio.c: Likewise.
	* ctrl_c.c: Likewise.
	* expect.c: Likewise.
	* gsocket.h: Likewise.
	* mingw32.h: Likewise.
	* mkdir.c: Likewise.
	* rtfinal.c: Likewise.
	* rtinit.c: Likewise.
	* seh_init.c: Likewise.
	* sysdep.c: Likewise.
	* terminals.c: Likewise.
	* tracebak.c: Likewise.

gcc/jit/

	PR middle-end/108300
	* jit-w32.h: Define `WIN32_LEAN_AND_MEAN` before <windows.h>.

libatomic/

	PR middle-end/108300
	* config/mingw/lock.c: Define `WIN32_LEAN_AND_MEAN` before
	<windows.h>.

libffi/

	PR middle-end/108300
	* src/aarch64/ffi.c: Define `WIN32_LEAN_AND_MEAN` before
	<windows.h>.

libgcc/

	PR middle-end/108300
	* config/i386/enable-execute-stack-mingw32.c: Define
	`WIN32_LEAN_AND_MEAN` before <windows.h>.
	* libgcc2.c: Likewise.
	* unwind-generic.h: Likewise.

libgfortran/

	PR middle-end/108300
	* intrinsics/sleep.c: Define `WIN32_LEAN_AND_MEAN` before
	<windows.h>.

libgomp/

	PR middle-end/108300
	* config/mingw32/proc.c: Define `WIN32_LEAN_AND_MEAN` before
	<windows.h>.

libiberty/

	PR middle-end/108300
	* make-temp-file.c: Define `WIN32_LEAN_AND_MEAN` before <windows.h>.
	* pex-win32.c: Likewise.

libssp/

	PR middle-end/108300
	* ssp.c: Define `WIN32_LEAN_AND_MEAN` before <windows.h>.

libstdc++-v3/

	PR middle-end/108300
	* src/c++11/system_error.cc: Define `WIN32_LEAN_AND_MEAN` before
	<windows.h>.
	* src/c++11/thread.cc: Likewise.
	* src/c++17/fs_ops.cc: Likewise.
	* src/filesystem/ops.cc: Likewise.

libvtv/

	PR middle-end/108300
	* vtv_malloc.cc: Define `WIN32_LEAN_AND_MEAN` before <windows.h>.
	* vtv_rts.cc: Likewise.
	* vtv_utils.cc: Likewise.

Rotate ChangeLog files for ChangeLogs with yearly cadence.

Since GCC 12, the conversion between the array descriptors formats - the
internal (GFC) and the C binding one (CFI) - moved to the compiler itself
such that the cfi_desc_to_gfc_desc/gfc_desc_to_cfi_desc functions are only
used with older code (GCC 9 to 11).  The newly added checks caused asserts
as older code did not pass the proper values (e.g. real(4) as effective
argument arrived as BT_ASSUME type as the effective type got lost inbetween).

As proposed in the PR, revert to the GCC 11 version - known bugs is better
than some fixes and new issues. Still, GCC 12 is much better in terms of
TS29113 support and should really be used.

This patch uses the current libgomp version of the GCC 11 branch, except
it fixes the GFC version number (which is 0), uses calloc instead of malloc,
and sets the lower bound to 1 instead of keeping it as is for
CFI_attribute_other.

libgfortran/ChangeLog:

	PR libfortran/108056
	* runtime/ISO_Fortran_binding.c (cfi_desc_to_gfc_desc,
	gfc_desc_to_cfi_desc): Mostly revert to GCC 11 version for
	those backward-compatiblity-only functions.

Needed after a recent change.

gcc/ChangeLog:

	* configure: Regenerate.

libatomic/ChangeLog:

	* configure: Regenerate.

libbacktrace/ChangeLog:

	* configure: Regenerate.

libcc1/ChangeLog:

	* configure: Regenerate.

libffi/ChangeLog:

	* configure: Regenerate.

libgfortran/ChangeLog:

	* configure: Regenerate.

libgomp/ChangeLog:

	* configure: Regenerate.

libitm/ChangeLog:

	* configure: Regenerate.

libobjc/ChangeLog:

	* configure: Regenerate.

liboffloadmic/ChangeLog:

	* configure: Regenerate.
	* plugin/configure: Regenerate.

libphobos/ChangeLog:

	* configure: Regenerate.

libquadmath/ChangeLog:

	* configure: Regenerate.

libsanitizer/ChangeLog:

	* configure: Regenerate.

libssp/ChangeLog:

	* configure: Regenerate.

libstdc++-v3/ChangeLog:

	* configure: Regenerate.

libvtv/ChangeLog:

	* configure: Regenerate.

lto-plugin/ChangeLog:

	* configure: Regenerate.

zlib/ChangeLog:

	* configure: Regenerate.

This change adds the configury bits to activate the build of
shared libs on VxWorks ports configured with --enable-shared,
for libraries variants where this is generally supported (rtp,
code model !large - currently not compatible with -fPIC).

Set lt_cv_deplibs_check_method in libtool.m4, so the build of
libraries know how to establish dependencies.  This is useful in
configurations such as aarch64 where proper support of LSE relies
on accurate dependency information between libstdc++ and libgcc_s
to begin with.

Regenerate configure scripts to reflect libtool.m4 change.

2022-10-09  Olivier Hainque  <hainque@adacore.com>

	* libtool.m4 (*vxworks*): When enable_shared, set dynamic_linker
	and friends for rtp !large. Assume the linker has the required
	abilities and set lt_cv_deplibs_check_method.

gcc/
	* config.gcc (*vxworks*): Add t-slibgcc fragment
	if enable_shared.

libgcc/
	* config.host (*vxworks*): When enable_shared, add
	libgcc and crtstuff "shared" fragments for rtp except
	large code model.
	(aarch64*-wrs-vxworks7*): Remove t-slibgcc-libgcc from
	the list of fragments.

2022-10-09  Olivier Hainque  <hainque@adacore.com>

gcc/
	* configure: Regenerate.

libatomic/
	* configure: Regenerate.

libbacktrace/
	* configure: Regenerate.

libcc1/
	* configure: Regenerate.

libffi/
	* configure: Regenerate.

libgfortran/
	* configure: Regenerate.

libgomp/
	* configure: Regenerate.

libitm/
	* configure: Regenerate.

libobjc/
	* configure: Regenerate.

liboffloadmic/
	* configure: Regenerate.

liboffloadmic/
	* plugin/configure: Regenerate.

libphobos/
	* configure: Regenerate.

libquadmath/
	* configure: Regenerate.

libsanitizer/
	* configure: Regenerate.

libssp/
	* configure: Regenerate.

libstdc++-v3/
	* configure: Regenerate.

libvtv/
	* configure: Regenerate.

lto-plugin/
	* configure: Regenerate.

zlib/
	* configure: Regenerate.

It used to cause errors if a thread model other than `posix` was selected,
which looks like a leftover from a7987858.

libgfortran/
	* io/async.h (struct async_unit): Use `__gthread_t` instead
	of `pthread_t`.

Signed-off-by: LIU Hao <lh_mouse@126.com>
Signed-off-by: Jonathan Yong <10walls@gmail.com>