From-SVN: r251541

	* configure.ac: Substitute GOC_FOR_TARGET and GCC_FOR_TARGET.
	* Makefile.am (MOSTLYCLEANFILES): Add check-gcc.
	(check-gccgo): Create via a temporary file.
	(check-gcc): New target.
	(CHECK_ENV): Set CC.
	(ECHO_ENV): Report CC.
	(check-go-tool): Depend on check-gcc.
	(check-runtime, check-cgo-test, check-carchive-test): Likewise.
	* configure, Makefile.in: Rebuild.

From-SVN: r251540

re PR target/82015 (PowerPC should check if 2nd argument to __builtin_unpackv1ti and similar functions is 0 or 1)

2017-08-30  Michael Meissner  <meissner@linux.vnet.ibm.com>

	PR target/82015
	* gcc.target/powerpc/pr82015.c: Fix up error message.

From-SVN: r251539

	* tree-vect-patterns.c (vect_pattern_recog_1): Use VECTOR_TYPE_P instead
	of VECTOR_MODE_P check.
	* tree-vect-stmts.c (get_vectype_for_scalar_type_and_size): Allow single
	element vector types.


Co-Authored-By: Richard Biener <rguenther@suse.de>

From-SVN: r251538

...it's really a general RTL predicate, rather than something that depends
on the DF state.  Thanks to Segher for the suggestion.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>

gcc/
	* df.h (df_read_modify_subreg_p): Remove in favor of...
	* rtl.h (read_modify_subreg_p): ...this new function.  Take a
	const_rtx instead of an rtx.
	* cprop.c (local_cprop_find_used_regs): Update accordingly.
	* df-problems.c (df_word_lr_mark_ref): Likewise.
	* ira-lives.c (mark_pseudo_reg_live): Likewise.
	(mark_pseudo_reg_dead): Likewise.
	(mark_ref_dead): Likewise.
	* reginfo.c (init_subregs_of_mode): Likewise.
	* sched-deps.c (sched_analyze_1): Likewise.
	* df-scan.c (df_def_record_1): Likewise.
	(df_uses_record): Likewise.
	(df_read_modify_subreg_p): Remove in favor of...
	* rtlanal.c (read_modify_subreg_p): ...this new function.  Take a
	const_rtx instead of an rtx.

From-SVN: r251537

This patch adds a partial_subreg_p predicate to go alongside
paradoxical_subreg_p.

Like the paradoxical_subreg_p patch, this one replaces some tests that
were based on GET_MODE_SIZE rather than GET_MODE_PRECISION.  In each
case the change should be a no-op or an improvement.

The regcprop.c patch prevents some replacements of the 82-bit RFmode
with the 80-bit XFmode on ia64.  I don't understand the target details
here particularly well, but from the way the modes are described in
ia64-modes.def, it isn't valid to assume that an XFmode can carry an
RFmode payload.  A comparison of the testsuite assembly output for one
target per CPU showed no other differences.

Some of the places changed here are tracking the widest access mode
found for a register.  The series tries to standardise on:

  if (partial_subreg_p (widest_seen, new_mode))
    widest_seen = new_mode;

rather than:

  if (paradoxical_subreg_p (new_mode, widest_seen))
    widest_seen = new_mode;

Either would have been OK.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* rtl.h (partial_subreg_p): New function.
	* caller-save.c (save_call_clobbered_regs): Use it.
	* calls.c (expand_call): Likewise.
	* combine.c (combinable_i3pat): Likewise.
	(simplify_set): Likewise.
	(make_extraction): Likewise.
	(make_compound_operation_int): Likewise.
	(gen_lowpart_or_truncate): Likewise.
	(force_to_mode): Likewise.
	(make_field_assignment): Likewise.
	(reg_truncated_to_mode): Likewise.
	(record_truncated_value): Likewise.
	(move_deaths): Likewise.
	* cse.c (record_jump_cond): Likewise.
	(cse_insn): Likewise.
	* cselib.c (cselib_lookup_1): Likewise.
	* expmed.c (extract_bit_field_using_extv): Likewise.
	* function.c (assign_parm_setup_reg): Likewise.
	* ifcvt.c (noce_convert_multiple_sets): Likewise.
	* ira-build.c (create_insn_allocnos): Likewise.
	* lra-coalesce.c (merge_pseudos): Likewise.
	* lra-constraints.c (match_reload): Likewise.
	(simplify_operand_subreg): Likewise.
	(curr_insn_transform): Likewise.
	* lra-lives.c (process_bb_lives): Likewise.
	* lra.c (new_insn_reg): Likewise.
	(lra_substitute_pseudo): Likewise.
	* regcprop.c (mode_change_ok): Likewise.
	(maybe_mode_change): Likewise.
	(copyprop_hardreg_forward_1): Likewise.
	* reload.c (push_reload): Likewise.
	(find_reloads): Likewise.
	(find_reloads_subreg_address): Likewise.
	* reload1.c (alter_reg): Likewise.
	(eliminate_regs_1): Likewise.
	* simplify-rtx.c (simplify_unary_operation_1): Likewise.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251536

        * config/rs6000/rs6000.c (rs6000_expand_binop_builtin): Revert
        back to if statements, including unpack.

From-SVN: r251535

	* simple-object-xcoff.c (simple_object_xcoff_find_sections):
	Improve .go_export csect handling.  Don't make assumptions
	on containing section or number of auxiliary entries.

From-SVN: r251533

2017-08-30  Martin Liska  <mliska@suse.cz>

	PR inline-asm/82001
	* ipa-icf-gimple.c (func_checker::compare_tree_list_operand):
	Rename to ...
	(func_checker::compare_asm_inputs_outputs): ... this function.
	(func_checker::compare_gimple_asm): Use the function to compare
	also ASM constrains.
	* ipa-icf-gimple.h: Rename the function.
2017-08-30  Martin Liska  <mliska@suse.cz>

	PR inline-asm/82001
	* gcc.dg/ipa/pr82001.c: New test.

From-SVN: r251530

From-SVN: r251529

This patch adds another machine_mode wrapper for modes that are
known to be COMPLEX_MODE_P.  There aren't yet many places that make
use of it, but that might change in future.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* coretypes.h (complex_mode): New type.
	* gdbhooks.py (build_pretty_printer): Handle it.
	* machmode.h (complex_mode): New class.
	(complex_mode::includes_p): New function.
	(is_complex_int_mode): Likewise.
	(is_complex_float_mode): Likewise.
	* genmodes.c (get_mode_class): Handle complex mode classes.
	* function.c (expand_function_end): Use is_complex_int_mode.

gcc/go/
	* go-lang.c (go_langhook_type_for_mode): Use is_complex_float_mode.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251527

This patch adds a scalar_mode_pod class and uses it to
replace the machine_mode in fixed_value.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* coretypes.h (scalar_mode_pod): New typedef.
	* gdbhooks.py (build_pretty_printer): Handle it.
	* machmode.h (gt_ggc_mx, gt_pch_nx): New functions.
	* fixed-value.h (fixed_value::mode): Change type to scalar_mode_pod.
	* fold-const.c (fold_convert_const_int_from_fixed): Use scalar_mode.
	* tree-streamer-in.c (unpack_ts_fixed_cst_value_fields): Use
	as_a <scalar_mode>.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251526

This patch uses scalar_mode in a few miscellaneous places:

- Previous patches mean mode_to_vector can take a scalar_mode without
  further changes.

- Implicit promotion is limited to scalar types (affects promote_mode
  and sdbout_parms)

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* machmode.h (mode_for_vector): Take a scalar_mode instead
	of a machine_mode.
	* stor-layout.c (mode_for_vector): Likewise.
	* explow.c (promote_mode): Use as_a <scalar_mode>.
	* sdbout.c (sdbout_parms): Use is_a <scalar_mode>.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251525

This patch makes the preferred_simd_mode target hook take a scalar_mode
rather than a machine_mode.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* target.def (preferred_simd_mode): Take a scalar_mode
	instead of a machine_mode.
	* targhooks.h (default_preferred_simd_mode): Likewise.
	* targhooks.c (default_preferred_simd_mode): Likewise.
	* config/arc/arc.c (arc_preferred_simd_mode): Likewise.
	* config/arm/arm.c (arm_preferred_simd_mode): Likewise.
	* config/c6x/c6x.c (c6x_preferred_simd_mode): Likewise.
	* config/epiphany/epiphany.c (epiphany_preferred_simd_mode): Likewise.
	* config/i386/i386.c (ix86_preferred_simd_mode): Likewise.
	* config/mips/mips.c (mips_preferred_simd_mode): Likewise.
	* config/nvptx/nvptx.c (nvptx_preferred_simd_mode): Likewise.
	* config/powerpcspe/powerpcspe.c (rs6000_preferred_simd_mode):
	Likewise.
	* config/rs6000/rs6000.c (rs6000_preferred_simd_mode): Likewise.
	* config/s390/s390.c (s390_preferred_simd_mode): Likewise.
	* config/sparc/sparc.c (sparc_preferred_simd_mode): Likewise.
	* config/aarch64/aarch64.c (aarch64_preferred_simd_mode): Likewise.
	(aarch64_simd_scalar_immediate_valid_for_move): Update accordingly.
	* doc/tm.texi: Regenerate.
	* optabs-query.c (can_vec_mask_load_store_p): Return false for
	non-scalar modes.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251524

This patch makes the scalar_mode_supported_p target hook take a
scalar_mode rather than a machine_mode.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* target.def (scalar_mode_supported_p): Take a scalar_mode
	instead of a machine_mode.
	* targhooks.h (default_scalar_mode_supported_p): Likewise.
	* targhooks.c (default_scalar_mode_supported_p): Likewise.
	* config/aarch64/aarch64.c (aarch64_scalar_mode_supported_p): Likewise.
	* config/alpha/alpha.c (alpha_scalar_mode_supported_p): Likewise.
	* config/arm/arm.c (arm_scalar_mode_supported_p): Likewise.
	* config/avr/avr.c (avr_scalar_mode_supported_p): Likewise.
	* config/c6x/c6x.c (c6x_scalar_mode_supported_p): Likewise.
	* config/i386/i386.c (ix86_scalar_mode_supported_p): Likewise.
	* config/ia64/ia64.c (ia64_scalar_mode_supported_p): Likewise.
	* config/mips/mips.c (mips_scalar_mode_supported_p): Likewise.
	* config/msp430/msp430.c (msp430_scalar_mode_supported_p): Likewise.
	* config/pa/pa.c (pa_scalar_mode_supported_p): Likewise.
	* config/pdp11/pdp11.c (pdp11_scalar_mode_supported_p): Likewise.
	* config/powerpcspe/powerpcspe.c (rs6000_scalar_mode_supported_p):
	Likewise.
	* config/rs6000/rs6000.c (rs6000_scalar_mode_supported_p): Likewise.
	* config/s390/s390.c (s390_scalar_mode_supported_p): Likewise.
	* config/spu/spu.c (spu_scalar_mode_supported_p): Likewise.
	* config/tilegx/tilegx.c (tilegx_scalar_mode_supported_p): Likewise.
	* config/tilepro/tilepro.c (tilepro_scalar_mode_supported_p):
	Likewise.
	* doc/tm.texi: Regenerate.

gcc/c-family/
	* c-attribs.c (vector_mode_valid_p) Fold GET_MODE_INNER call
	into scalar_mode_supported_p call.
	(handle_mode_attribute): Update call to scalar_mode_supported_p.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251523

This patch uses opt_scalar_mode when iterating over scalar modes.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* coretypes.h (opt_scalar_mode): New typedef.
	* gdbhooks.py (build_pretty_printers): Handle it.
	* machmode.h (mode_iterator::get_2xwider): Add overload for
	opt_mode<T>.
	* emit-rtl.c (init_emit_once): Use opt_scalar_mode when iterating
	over scalar modes.
	* expr.c (convert_mode_scalar): Likewise.
	* omp-low.c (omp_clause_aligned_alignment): Likewise.
	* optabs.c (expand_float): Likewise.
	(expand_fix): Likewise.
	* tree-vect-stmts.c (vectorizable_conversion): Likewise.

gcc/c-family/
	* c-common.c (c_common_fixed_point_type_for_size): Use opt_scalar_mode
	for the mode iterator.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251522

The expand_float code:

  /* Unsigned integer, and no way to convert directly.  Convert as signed,
     then unconditionally adjust the result.  */

and the expand_fix code:

  /* For an unsigned conversion, there is one more way to do it.
     If we have a signed conversion, we generate code that compares
     the real value to the largest representable positive number.  If if
     is smaller, the conversion is done normally.  Otherwise, subtract
     one plus the highest signed number, convert, and add it back.

are restricted to scalars, since the expansion branches on a
comparison of the value.  This patch makes that explicit.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* optabs.c (expand_float): Explicitly check for scalars before
	using a branching expansion.
	(expand_fix): Likewise.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251521

This patch splits the final scalar-only part of convert_mode out
into its own subroutine and treats the modes as scalar_modes there.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* expr.c (convert_mode): Split scalar handling out into...
	(convert_mode_scalar): ...this new function.  Treat the modes
	as scalar_modes.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251520

This patch uses scalar_mode for code that operates only on MODE_INT
and MODE_FLOAT.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* omp-expand.c (expand_omp_atomic): Use is_int_mode, is_float_mode
	and scalar_mode.
	* tree-vect-stmts.c (get_vectype_for_scalar_type_and_size): Likewise.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251519

This patch makes the fixed-value.* routines use scalar_mode.
It would be possible to define special classes for these modes, as for
scalar_int_mode and scalar_float_mode, but at the moment nothing would
benefit from them.  In particular, there's no use case that would help
select between one class for all fixed-point modes versus one class for
fractional modes and one class for accumulator modes.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* fixed-value.h (fixed_from_double_int): Take a scalar_mode
	rather than a machine_mode.
	(fixed_from_string): Likewise.
	(fixed_convert): Likewise.
	(fixed_convert_from_int): Likewise.
	(fixed_convert_from_real): Likewise.
	(real_convert_from_fixed): Likewise.
	* fixed-value.c (fixed_from_double_int): Likewise.
	(fixed_from_string): Likewise.
	(fixed_convert): Likewise.
	(fixed_convert_from_int): Likewise.
	(fixed_convert_from_real): Likewise.
	(real_convert_from_fixed): Likewise.
	* config/avr/avr.c (avr_out_round): Use as_a <scalar_mode>.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251518

This patch treats the mode associated with an integer constant as a
scalar_mode.  We can't use the more natural-sounding scalar_int_mode
because we also use (const_int 0) for bounds-checking modes.  (It might
be worth adding a bounds-specific code instead, but that's for another
day.)

This exposes a latent bug in simplify_immed_subreg, which for
vectors of CONST_WIDE_INTs would pass the vector mode rather than
the element mode to rtx_mode_t.

I think the:

		  /* We can get a 0 for an error mark.  */
		  || GET_MODE_CLASS (mode) == MODE_VECTOR_INT
		  || GET_MODE_CLASS (mode) == MODE_VECTOR_FLOAT

in immed_double_const is dead.  trunc_int_mode (via gen_int_mode)
would go on to ICE if the mode fitted in a HWI, and surely plenty
of other code would be confused to see a const_int be interpreted
as a vector.  We should instead be using CONST0_RTX (mode) if we
need a safe constant for a particular mode.

We didn't try to make these functions take scalar_mode arguments
because in many cases that would be too invasive at this stage.
Maybe it would become feasible in future.  Also, the long-term
direction should probably be to add modes to constant integers
rather than have then as VOIDmode odd-ones-out.  That would remove
the need for rtx_mode_t and thus remove the question whether they
should use scalar_int_mode, scalar_mode or machine_mode.

The patch also uses scalar_mode for the CONST_DOUBLE handling
in loc_descriptor.  In that case the mode can legitimately be
either floating-point or integral.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* emit-rtl.c (immed_double_const): Use is_a <scalar_mode> instead
	of separate mode class checks.  Do not allow vector modes here.
	(immed_wide_int_const): Use as_a <scalar_mode>.
	* explow.c (trunc_int_for_mode): Likewise.
	* rtl.h (wi::int_traits<rtx_mode_t>::get_precision): Likewise.
	(wi::shwi): Likewise.
	(wi::min_value): Likewise.
	(wi::max_value): Likewise.
	* dwarf2out.c (loc_descriptor): Likewise.
	* simplify-rtx.c (simplify_immed_subreg): Fix rtx_mode_t argument
	for CONST_WIDE_INT.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251517

This patch adds a SCALAR_TYPE_MODE macro, along the same lines as
SCALAR_INT_TYPE_MODE and SCALAR_FLOAT_TYPE_MODE.  It also adds
two instances of as_a <scalar_mode> to c_common_type, when converting
an unsigned fixed-point SCALAR_TYPE_MODE to the equivalent signed mode.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* tree.h (SCALAR_TYPE_MODE): New macro.
	* expr.c (expand_expr_addr_expr_1): Use it.
	(expand_expr_real_2): Likewise.
	* fold-const.c (fold_convert_const_fixed_from_fixed): Likeise.
	(fold_convert_const_fixed_from_int): Likewise.
	(fold_convert_const_fixed_from_real): Likewise.
	(native_encode_fixed): Likewise
	(native_encode_complex): Likewise
	(native_encode_vector): Likewise.
	(native_interpret_fixed): Likewise.
	(native_interpret_real): Likewise.
	(native_interpret_complex): Likewise.
	(native_interpret_vector): Likewise.
	* omp-simd-clone.c (simd_clone_adjust_return_type): Likewise.
	(simd_clone_adjust_argument_types): Likewise.
	(simd_clone_init_simd_arrays): Likewise.
	(simd_clone_adjust): Likewise.
	* stor-layout.c (layout_type): Likewise.
	* tree.c (build_minus_one_cst): Likewise.
	* tree-cfg.c (verify_gimple_assign_ternary): Likewise.
	* tree-inline.c (estimate_move_cost): Likewise.
	* tree-ssa-math-opts.c (convert_plusminus_to_widen): Likewise.
	* tree-vect-loop.c (vect_create_epilog_for_reduction): Likewise.
	(vectorizable_reduction): Likewise.
	* tree-vect-patterns.c (vect_recog_widen_mult_pattern): Likewise.
	(vect_recog_mixed_size_cond_pattern): Likewise.
	(check_bool_pattern): Likewise.
	(adjust_bool_pattern): Likewise.
	(search_type_for_mask_1): Likewise.
	* tree-vect-slp.c (vect_schedule_slp_instance): Likewise.
	* tree-vect-stmts.c (vectorizable_conversion): Likewise.
	(vectorizable_load): Likewise.
	(vectorizable_store): Likewise.
	* ubsan.c (ubsan_encode_value): Likewise.
	* varasm.c (output_constant): Likewise.

gcc/c-family/
	* c-lex.c (interpret_fixed): Use SCALAR_TYPE_MODE.
	* c-common.c (c_build_vec_perm_expr): Likewise.

gcc/c/
	* c-typeck.c (build_binary_op): Use SCALAR_TYPE_MODE.
	(c_common_type): Likewise.  Use as_a <scalar_mode> when setting
	m1 and m2 to the signed equivalent of a fixed-point
	SCALAR_TYPE_MODE.

gcc/cp/
	* typeck.c (cp_build_binary_op): Use SCALAR_TYPE_MODE.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251516

This patch adds a scalar_mode class that can hold any scalar mode,
specifically:

  - scalar integers
  - scalar floating-point values
  - scalar fractional modes
  - scalar accumulator modes
  - pointer bounds modes

To start with this patch uses this type for GET_MODE_INNER.
Later patches add more uses.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* coretypes.h (scalar_mode): New class.
	* machmode.h (scalar_mode): Likewise.
	(scalar_mode::includes_p): New function.
	(mode_to_inner): Return a scalar_mode rather than a machine_mode.
	* gdbhooks.py (build_pretty_printers): Handle scalar_mode.
	* genmodes.c (get_mode_class): Handle remaining scalar modes.
	* cfgexpand.c (expand_debug_expr): Use scalar_mode.
	* expmed.c (store_bit_field_1): Likewise.
	(extract_bit_field_1): Likewise.
	* expr.c (write_complex_part): Likewise.
	(read_complex_part): Likewise.
	(emit_move_complex_push): Likewise.
	(expand_expr_real_2): Likewise.
	* function.c (assign_parm_setup_reg): Likewise.
	(assign_parms_unsplit_complex): Likewise.
	* optabs.c (expand_binop): Likewise.
	* rtlanal.c (subreg_get_info): Likewise.
	* simplify-rtx.c (simplify_immed_subreg): Likewise.
	* varasm.c (output_constant_pool_2): Likewise.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251515

This patch makes a few simplifications after the previous
mechanical machine_mode->scalar_int_mode change.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* expmed.c (extract_high_half): Use scalar_int_mode and remove
	assertion.
	(expmed_mult_highpart_optab): Likewise.
	(expmed_mult_highpart): Likewise.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251514

This patch changes the types of various things from machine_mode
to scalar_int_mode, in cases where (after previous patches)
simply changing the type is enough on its own.  The patch does
nothing other than that.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* builtins.h (builtin_strncpy_read_str): Take a scalar_int_mode
	instead of a machine_mode.
	(builtin_memset_read_str): Likewise.
	* builtins.c (c_readstr): Likewise.
	(builtin_memcpy_read_str): Likewise.
	(builtin_strncpy_read_str): Likewise.
	(builtin_memset_read_str): Likewise.
	(builtin_memset_gen_str): Likewise.
	(expand_builtin_signbit): Use scalar_int_mode for local variables.
	* cfgexpand.c (convert_debug_memory_address): Take a scalar_int_mode
	instead of a machine_mode.
	* combine.c (simplify_if_then_else): Use scalar_int_mode for local
	variables.
	(make_extraction): Likewise.
	(try_widen_shift_mode): Take and return scalar_int_modes instead
	of machine_modes.
	* config/aarch64/aarch64.c (aarch64_libgcc_cmp_return_mode): Return
	a scalar_int_mode instead of a machine_mode.
	* config/avr/avr.c (avr_addr_space_address_mode): Likewise.
	(avr_addr_space_pointer_mode): Likewise.
	* config/cr16/cr16.c (cr16_unwind_word_mode): Likewise.
	* config/msp430/msp430.c (msp430_addr_space_pointer_mode): Likewise.
	(msp430_unwind_word_mode): Likewise.
	* config/spu/spu.c (spu_unwind_word_mode): Likewise.
	(spu_addr_space_pointer_mode): Likewise.
	(spu_addr_space_address_mode): Likewise.
	(spu_libgcc_cmp_return_mode): Likewise.
	(spu_libgcc_shift_count_mode): Likewise.
	* config/rl78/rl78.c (rl78_addr_space_address_mode): Likewise.
	(rl78_addr_space_pointer_mode): Likewise.
	(fl78_unwind_word_mode): Likewise.
	(rl78_valid_pointer_mode): Take a scalar_int_mode instead of a
	machine_mode.
	* config/alpha/alpha.c (vms_valid_pointer_mode): Likewise.
	* config/ia64/ia64.c (ia64_vms_valid_pointer_mode): Likewise.
	* config/mips/mips.c (mips_mode_rep_extended): Likewise.
	(mips_valid_pointer_mode): Likewise.
	* config/tilegx/tilegx.c (tilegx_mode_rep_extended): Likewise.
	* config/ft32/ft32.c (ft32_valid_pointer_mode): Likewise.
	(ft32_addr_space_pointer_mode): Return a scalar_int_mode instead
	of a machine_mode.
	(ft32_addr_space_address_mode): Likewise.
	* config/m32c/m32c.c (m32c_valid_pointer_mode): Take a
	scalar_int_mode instead of a machine_mode.
	(m32c_addr_space_pointer_mode): Return a scalar_int_mode instead
	of a machine_mode.
	(m32c_addr_space_address_mode): Likewise.
	* config/powerpcspe/powerpcspe.c (rs6000_abi_word_mode): Likewise.
	(rs6000_eh_return_filter_mode): Likewise.
	* config/rs6000/rs6000.c (rs6000_abi_word_mode): Likewise.
	(rs6000_eh_return_filter_mode): Likewise.
	* config/s390/s390.c (s390_libgcc_cmp_return_mode): Likewise.
	(s390_libgcc_shift_count_mode): Likewise.
	(s390_unwind_word_mode): Likewise.
	(s390_valid_pointer_mode): Take a scalar_int_mode rather than a
	machine_mode.
	* target.def (mode_rep_extended): Likewise.
	(valid_pointer_mode): Likewise.
	(addr_space.valid_pointer_mode): Likewise.
	(eh_return_filter_mode): Return a scalar_int_mode rather than
	a machine_mode.
	(libgcc_cmp_return_mode): Likewise.
	(libgcc_shift_count_mode): Likewise.
	(unwind_word_mode): Likewise.
	(addr_space.pointer_mode): Likewise.
	(addr_space.address_mode): Likewise.
	* doc/tm.texi: Regenerate.
	* dojump.c (prefer_and_bit_test): Take a scalar_int_mode rather than
	a machine_mode.
	(do_jump): Use scalar_int_mode for local variables.
	* dwarf2cfi.c (init_return_column_size): Take a scalar_int_mode
	rather than a machine_mode.
	* dwarf2out.c (convert_descriptor_to_mode): Likewise.
	(scompare_loc_descriptor_wide): Likewise.
	(scompare_loc_descriptor_narrow): Likewise.
	* emit-rtl.c (adjust_address_1): Use scalar_int_mode for local
	variables.
	* except.c (sjlj_emit_dispatch_table): Likewise.
	(expand_builtin_eh_copy_values): Likewise.
	* explow.c (convert_memory_address_addr_space_1): Likewise.
	Take a scalar_int_mode rather than a machine_mode.
	(convert_memory_address_addr_space): Take a scalar_int_mode rather
	than a machine_mode.
	(memory_address_addr_space): Use scalar_int_mode for local variables.
	* expmed.h (expand_mult_highpart_adjust): Take a scalar_int_mode
	rather than a machine_mode.
	* expmed.c (mask_rtx): Likewise.
	(init_expmed_one_conv): Likewise.
	(expand_mult_highpart_adjust): Likewise.
	(extract_high_half): Likewise.
	(expmed_mult_highpart_optab): Likewise.
	(expmed_mult_highpart): Likewise.
	(expand_smod_pow2): Likewise.
	(expand_sdiv_pow2): Likewise.
	(emit_store_flag_int): Likewise.
	(adjust_bit_field_mem_for_reg): Use scalar_int_mode for local
	variables.
	(extract_low_bits): Likewise.
	* expr.h (by_pieces_constfn): Take a scalar_int_mode rather than
	a machine_mode.
	* expr.c (pieces_addr::adjust):  Likewise.
	(can_store_by_pieces): Likewise.
	(store_by_pieces): Likewise.
	(clear_by_pieces_1): Likewise.
	(expand_expr_addr_expr_1): Likewise.
	(expand_expr_addr_expr): Use scalar_int_mode for local variables.
	(expand_expr_real_1): Likewise.
	(try_casesi): Likewise.
	* final.c (shorten_branches): Likewise.
	* fold-const.c (fold_convert_const_int_from_fixed): Change the
	type of "mode" to machine_mode.
	* internal-fn.c (expand_arith_overflow_result_store): Take a
	scalar_int_mode rather than a machine_mode.
	(expand_mul_overflow): Use scalar_int_mode for local variables.
	* loop-doloop.c (doloop_modify): Likewise.
	(doloop_optimize): Likewise.
	* optabs.c (expand_subword_shift): Take a scalar_int_mode rather
	than a machine_mode.
	(expand_doubleword_shift_condmove): Likewise.
	(expand_doubleword_shift): Likewise.
	(expand_doubleword_clz): Likewise.
	(expand_doubleword_popcount): Likewise.
	(expand_doubleword_parity): Likewise.
	(expand_absneg_bit): Use scalar_int_mode for local variables.
	(prepare_float_lib_cmp): Likewise.
	* rtl.h (convert_memory_address_addr_space_1): Take a scalar_int_mode
	rather than a machine_mode.
	(convert_memory_address_addr_space): Likewise.
	(get_mode_bounds): Likewise.
	(get_address_mode): Return a scalar_int_mode rather than a
	machine_mode.
	* rtlanal.c (get_address_mode): Likewise.
	* stor-layout.c (get_mode_bounds): Take a scalar_int_mode rather
	than a machine_mode.
	* targhooks.c (default_mode_rep_extended): Likewise.
	(default_valid_pointer_mode): Likewise.
	(default_addr_space_valid_pointer_mode): Likewise.
	(default_eh_return_filter_mode): Return a scalar_int_mode rather
	than a machine_mode.
	(default_libgcc_cmp_return_mode): Likewise.
	(default_libgcc_shift_count_mode): Likewise.
	(default_unwind_word_mode): Likewise.
	(default_addr_space_pointer_mode): Likewise.
	(default_addr_space_address_mode): Likewise.
	* targhooks.h (default_eh_return_filter_mode): Likewise.
	(default_libgcc_cmp_return_mode): Likewise.
	(default_libgcc_shift_count_mode): Likewise.
	(default_unwind_word_mode): Likewise.
	(default_addr_space_pointer_mode): Likewise.
	(default_addr_space_address_mode): Likewise.
	(default_mode_rep_extended): Take a scalar_int_mode rather than
	a machine_mode.
	(default_valid_pointer_mode): Likewise.
	(default_addr_space_valid_pointer_mode): Likewise.
	* tree-ssa-address.c (addr_for_mem_ref): Use scalar_int_mode for
	local variables.
	* tree-ssa-loop-ivopts.c (get_shiftadd_cost): Take a scalar_int_mode
	rather than a machine_mode.
	* tree-switch-conversion.c (array_value_type): Use scalar_int_mode
	for local variables.
	* tree-vrp.c (simplify_float_conversion_using_ranges): Likewise.
	* var-tracking.c (use_narrower_mode): Take a scalar_int_mode rather
	than a machine_mode.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251513

The callers of do_jump_by_parts_* had already established
that the modes were MODE_INTs, so this patch passes the
modes down as scalar_int_modes.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* dojump.c (do_jump_by_parts_greater_rtx): Change the type of
	the mode argument to scalar_int_mode.
	(do_jump_by_parts_zero_rtx): Likewise.
	(do_jump_by_parts_equality_rtx): Likewise.
	(do_jump_by_parts_greater): Take a mode argument.
	(do_jump_by_parts_equality): Likewise.
	(do_jump_1): Update calls accordingly.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251512

This patch adds a helper function to get the mode of the addresses
or offsets in a jump table.  It also changes the final.c code to use
rtx_jump_table_data over rtx or rtx_insn in cases where it needed
to use the new helper.  This in turn meant adding a safe_dyn_cast
equivalent of safe_as_a, to cope with null NEXT_INSNs.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* is-a.h (safe_dyn_cast): New function.
	* rtl.h (rtx_jump_table_data::get_data_mode): New function.
	(jump_table_for_label): Likewise.
	* final.c (final_addr_vec_align): Take an rtx_jump_table_data *
	instead of an rtx_insn *.
	(shorten_branches): Use dyn_cast instead of LABEL_P and
	JUMP_TABLE_DATA_P.  Use jump_table_for_label and
	rtx_jump_table_data::get_data_mode.
	(final_scan_insn): Likewise.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251511

This patch uses scalar_int_modes for:

  /* If I2 is setting a pseudo to a constant and I3 is setting some
     sub-part of it to another constant, merge them by making a new
     constant.  */

This was already implicit, but the danger with checking only
CONST_SCALAR_INT_P is that it can include CC values too.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* combine.c (try_combine): Use is_a <scalar_int_mode> when
	trying to combine a full-register integer set with a subreg
	integer set.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251510

This patch rewrites the condition:

  if (tmode != address_mode && tmode != pointer_mode)
    tmode = address_mode;

to the equivalent:

  tmode == pointer_mode ? pointer_mode : address_mode

The latter has the advantage that the result is naturally
a scalar_int_mode; a later mechanical patch makes it one.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* expr.c (expand_expr_addr_expr): Add a new_tmode local variable
	that is always either address_mode or pointer_mode.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251509

This patch adjusts a couple of cases in which we had established
that two modes were equal and happened to be using the one with the
more general type instead of the one with the more specific type.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* expr.c (expand_expr_real_2): Use word_mode instead of innermode
	when the two are known to be equal.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251508

The main scalar integer block in simplify_const_unary_operation
had the condition:

  if (CONST_SCALAR_INT_P (op) && width > 0)

where "width > 0" was a roundabout way of testing != VOIDmode.
This patch replaces it with a check for a scalar_int_mode instead.
It also uses the number of bits in the input rather than the output
mode to determine the result of a "count ... bits in zero" operation.
(At the momemnt these modes have to be the same, but it still seems
conceptually wrong to use the number of bits in the output mode.)

The handling of float->integer ops also checked "width > 0",
but this was redundant with the earlier check for MODE_INT.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* simplify-rtx.c (simplify_const_unary_operation): Use
	is_a <scalar_int_mode> instead of checking for a nonzero
	precision.  Forcibly convert op_mode to a scalar_int_mode
	in that case.  More clearly differentiate the operand and
	result modes and use the former when deciding what the value
	of a count-bits operation should be.  Use is_int_mode instead
	of checking for a MODE_INT.  Remove redundant check for whether
	this mode has a zero precision.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251507

expand_unop can expand narrow clz, clrsb, ctz, bswap, parity and
ffs operations using optabs for wider modes.  These expansions
apply only to scalar integer modes (and not for example to vectors),
so the patch adds explicit checks for that.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* optabs.c (widen_leading): Change the type of the mode argument
	to scalar_int_mode.  Use opt_scalar_int_mode for the mode iterator.
	(widen_bswap): Likewise.
	(expand_parity): Likewise.
	(expand_ctz): Change the type of the mode argument to scalar_int_mode.
	(expand_ffs): Likewise.
	(epand_unop): Check for scalar integer modes before calling the
	above routines.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251506

The caller of const_scalar_mask_from_tree has proven that
the mode is a MODE_INT, so this patch passes it down as a
scalar_int_mode.  It also expands the comment a little.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* expr.c (const_scalar_mask_from_tree): Add a mode argument.
	Expand commentary.
	(expand_expr_real_1): Update call accordingly.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251505

After a certain point, extract_bit_field and store_bit_field
ensure that they're dealing with integer modes or BLKmode MEMs.
This patch uses scalar_int_mode and opt_scalar_int_mode for
those parts.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* expmed.c (store_bit_field_using_insv): Add op0_mode and
	value_mode arguments.  Use scalar_int_mode internally.
	(store_bit_field_1): Rename the new integer mode from imode
	to op0_mode and use it instead of GET_MODE (op0).  Update calls
	to store_split_bit_field, store_bit_field_using_insv and
	store_fixed_bit_field.
	(store_fixed_bit_field): Add op0_mode and value_mode arguments.
	Use scalar_int_mode internally.  Use a bit count rather than a mode
	when calculating the largest bit size for get_best_mode.
	Update calls to store_split_bit_field and store_fixed_bit_field_1.
	(store_fixed_bit_field_1): Add mode and value_mode arguments.
	Remove assertion that OP0 has a scalar integer mode.
	(store_split_bit_field): Add op0_mode and value_mode arguments.
	Update calls to extract_fixed_bit_field.
	(extract_bit_field_using_extv): Add an op0_mode argument.
	Use scalar_int_mode internally.
	(extract_bit_field_1): Rename the new integer mode from imode to
	op0_mode and use it instead of GET_MODE (op0).  Update calls to
	extract_split_bit_field, extract_bit_field_using_extv and
	extract_fixed_bit_field.
	(extract_fixed_bit_field): Add an op0_mode argument.  Update calls
	to extract_split_bit_field and extract_fixed_bit_field_1.
	(extract_fixed_bit_field_1): Add a mode argument.  Remove assertion
	that OP0 has a scalar integer mode.  Use as_a <scalar_int_mode>
	on the target mode.
	(extract_split_bit_field): Add an op0_mode argument.  Update call
	to extract_fixed_bit_field.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251504

This patch uses opt_scalar_int_mode rather than machine_mode
when iterating over scalar_int_modes, in cases where that helps
with future patches.  (Using machine_mode is still OK in places
that don't really care about the mode being a scalar integer.)

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* cse.c (cse_insn): Use opt_scalar_int_mode for the mode iterator.
	* explow.c (hard_function_value): Likewise.
	* expmed.c (extract_fixed_bit_field_1): Likewise.  Move the
	convert_to_mode call outside the loop.
	* expr.c (alignment_for_piecewise_move): Use opt_scalar_int_mode
	for the mode iterator.  Require the mode specified by max_pieces
	to exist.
	(emit_block_move_via_movmem): Use opt_scalar_int_mode for the
	mode iterator.
	(copy_blkmode_to_reg): Likewise.
	(set_storage_via_setmem): Likewise.
	* optabs.c (prepare_cmp_insn): Likewise.
	* rtlanal.c (init_num_sign_bit_copies_in_rep): Likewise.
	* stor-layout.c (finish_bitfield_representative): Likewise.

gcc/fortran/
	* trans-types.c (gfc_init_kinds): Use opt_scalar_int_mode for
	the mode iterator.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251503

When subregs contain promoted values, as indicated by
SUBREG_PROMOTED_VAR_P, both the unpromoted (outer) and
promoted (inner) values are known to be scalar integers.
This patch adds helper routines that get the modes as
scalar_int_modes.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* rtl.h (subreg_unpromoted_mode, subreg_promoted_mode): New functions.
	* expr.c (convert_move): Use them.
	(convert_modes): Likewise.
	(store_expr_with_bounds): Likewise.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251502

The two implementations of the reg_nonzero_bits and reg_num_sign_bits
hooks ignored the "known_x", "known_mode" and "known_ret" arguments,
so this patch removes them.  It adds a new scalar_int_mode parameter
that specifies the mode of "x".  (This mode might be different from
"mode", which is the mode in which "x" is used.)

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* rtl.h (rtl_hooks::reg_nonzero_bits): Add a scalar_int_mode
	parameter for the mode of "x".  Remove the "known_x", "known_mode"
	and "known_ret" arguments.  Change the type of the mode argument
	to scalar_int_mode.
	(rtl_hooks:reg_num_sign_bit_copies): Likewise.
	* combine.c (reg_nonzero_bits_for_combine): Update accordingly.
	(reg_num_sign_bit_copies_for_combine): Likewise.
	* rtlanal.c (nonzero_bits1): Likewise.
	(num_sign_bit_copies1): Likewise.
	* rtlhooks-def.h (reg_nonzero_bits_general): Likewise.
	(reg_num_sign_bit_copies_general): Likewise.
	* rtlhooks.c (reg_num_sign_bit_copies_general): Likewise.
	(reg_nonzero_bits_general): Likewise.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251501

Similarly to the nonzero_bits patch, this one moves the mode
class check and VOIDmode handling from num_sign_bit_copies1
to num_sign_bit_copies itself, then changes the subroutines
to operate on scalar_int_modes.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* rtlanal.c (num_sign_bit_copies): Handle VOIDmode here rather
	than in subroutines.  Return 1 for non-integer modes.
	(cached_num_sign_bit_copies): Change the type of the mode parameter
	to scalar_int_mode.
	(num_sign_bit_copies1): Likewise.  Remove early exit for other mode
	classes.  Handle CONST_INT_P first and then check whether X also
	has a scalar integer mode.  Check the same thing for inner registers
	of a SUBREG and for values that are being extended or truncated.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251500

nonzero_bits1 assumed that all bits of a floating-point or vector mode
were needed.  It seems likely that fixed-point modes should have been
handled in the same way.  After excluding those, the only remaining
modes that are likely to be useful are scalar integer ones.

This patch moves the mode class check to nonzero_bits itself, along
with the handling of mode == VOIDmode.  The subroutines of nonzero_bits
can then take scalar_int_modes.

2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* rtlanal.c (nonzero_bits): Handle VOIDmode here rather than
	in subroutines.  Return the mode mask for non-integer modes.
	(cached_nonzero_bits): Change the type of the mode parameter
	to scalar_int_mode.
	(nonzero_bits1): Likewise.  Remove early exit for other mode
	classes.  Handle CONST_INT_P first and then check whether X
	also has a scalar integer mode.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>

From-SVN: r251499

The comment for widest_int_mode said that it returns "the widest integer
mode no wider than SIZE", but it actually returns the widest integer
mode that is narrower than SIZE.  In practice SIZE is always greater
than 1, so it can always pick QImode in the worst case.  The VOIDmode
paths seem to be dead.

gcc/
2017-08-30  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* expr.c (widest_int_mode_for_size): Make the comment match the code.
	Return a scalar_int_mode and assert that the size is greater than
	one byte.
	(by_pieces_ninsns): Update accordingly and remove VOIDmode handling.
	(op_by_pieces_d::op_by_pieces_d): Likewise.
	(op_by_pieces_d::run): Likewise.
	(can_store_by_pieces): Likewise.

From-SVN: r251498