2024 -> 2025

2023 -> 2024

As discussed previously, a.out support is now quite deprecated, and in
some cases removed, in both Binutils itself and NetBSD, so this legacy
default makes little sense. `netbsdelf*` and `netbsdaout*` still work
allowing the user to be explicit about there choice. Additionally, the
configure script warns about the change as Nick Clifton requested.

One possible concern was the status of NetBSD on NS32K, where only a.out
was supported. But per [1] NetBSD has removed support, and if it were to
come back, it would be with ELF. The binutils implementation is
therefore marked obsolete, per the instructions in the last message.

With that patch and this one applied, I have confirmed the following:

--target=i686-unknown-netbsd
--target=i686-unknown-netbsdelf
  builds completely

--target=i686-unknown-netbsdaout
  properly fails because target is deprecated.

--target=vax-unknown-netbsdaout builds completely except for gas, where
the target is deprecated.

[1]: https://mail-index.netbsd.org/tech-toolchain/2021/07/19/msg004025.html

config/ChangeLog:

	* picflag.m4: Simplify SHmedia NetBSD match by presuming ELF.

gcc/ChangeLog:

	* configure: Regenerate.

libada/ChangeLog:

	* configure: Regenerate.

libgcc/ChangeLog:

	* configure: Regenerate.

libiberty/ChangeLog:

	* configure: Regenerate.

2022 -> 2023

fixincludes/ChangeLog:

	* config.h.in: Regenerate.
	* configure: Regenerate.

libada/ChangeLog:

	* configure: Regenerate.

libiberty/ChangeLog:

	* configure: Regenerate.

libobjc/ChangeLog:

	* configure: Regenerate.

liboffloadmic/ChangeLog:

	* configure: Regenerate.
	* plugin/configure: Regenerate.

libquadmath/ChangeLog:

	* configure: Regenerate.

libssp/ChangeLog:

	* configure: Regenerate.

libvtv/ChangeLog:

	* configure: Regenerate.

zlib/ChangeLog:

	* configure: Regenerate.

Do this separately from all other Copyright updates, as ChangeLog files
can be modified only separately.

Closes #102663

ChangeLog:

	PR other/102663
	* Makefile.def: Handle install-dvi target.
	* Makefile.tpl: Likewise.
	* Makefile.in: Regenerate.

c++tools/ChangeLog:

	PR other/102663
	* Makefile.in: Add dummy install-dvi target.

gcc/ChangeLog:

	PR other/102663
	* Makefile.in: Handle dvidir and install-dvi target.
	* configure: Regenerate.
	* configure.ac: Add install-dvi to target_list.

gcc/ada/ChangeLog:

	PR other/102663
	* gcc-interface/Make-lang.in: Allow dvi-formatted
	documentation to be installed.

gcc/c/ChangeLog:

	PR other/102663
	* Make-lang.in: Add dummy c.install-dvi target.

gcc/cp/ChangeLog:

	PR other/102663
	* Make-lang.in: Add dummy c++.install-dvi target.

gcc/d/ChangeLog:

	PR other/102663
	* Make-lang.in: Allow dvi-formatted documentation
	to be installed.

gcc/fortran/ChangeLog:

	PR other/102663
	* Make-lang.in: Allow dvi-formatted documentation
	to be installed.

gcc/lto/ChangeLog:

	PR other/102663
	* Make-lang.in: Add dummy lto.install-dvi target.

gcc/objc/ChangeLog:

	PR other/102663
	* Make-lang.in: Add dummy objc.install-dvi target.

gcc/objcp/ChangeLog:

	PR other/102663
	* Make-lang.in: Add dummy objc++.install-dvi target.

gnattools/ChangeLog:

	PR other/102663
	* Makefile.in: Add dummy install-dvi target.

libada/ChangeLog:

	PR other/102663
	* Makefile.in: Add dummy install-dvi target.

libcpp/ChangeLog:

	PR other/102663
	* Makefile.in: Add dummy install-dvi target.

libdecnumber/ChangeLog:

	PR other/102663
	* Makefile.in: Add dummy install-dvi target.

libiberty/ChangeLog:

	PR other/102663
	* Makefile.in: Allow dvi-formatted documentation
	to be installed.

Do this separately from all other Copyright updates, as ChangeLog files
can be modified only separately.

Provide means, in the form of a `--with-toolexeclibdir=' configuration
option, to override the default installation directory for target
libraries, otherwise known as $toolexeclibdir.  This is so that it is
possible to get newly-built libraries, particularly the shared ones,
installed in a common place, so that they can be readily used by the
target system as their host libraries, possibly over NFS, without a need
to manually copy them over from the currently hardcoded location they
would otherwise be installed in.

In the presence of the `--enable-version-specific-runtime-libs' option
and for configurations building native GCC the option is ignored.

	config/
	* toolexeclibdir.m4: New file.

	gcc/
	* doc/install.texi (Cross-Compiler-Specific Options): Document
	`--with-toolexeclibdir' option.

	libada/
	* Makefile.in (configure_deps): Add `toolexeclibdir.m4'.
	* configure.ac: Handle `--with-toolexeclibdir='.
	* configure: Regenerate.

	libatomic/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* testsuite/Makefile.in: Regenerate.

	libffi/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* include/Makefile.in: Regenerate.
	* man/Makefile.in: Regenerate.
	* testsuite/Makefile.in: Regenerate.

	libgcc/
	* Makefile.in (configure_deps): Add `toolexeclibdir.m4'.
	* configure.ac: Handle `--with-toolexeclibdir='.
	* configure: Regenerate.

	libgfortran/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

	libgomp/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* testsuite/Makefile.in: Regenerate.

	libhsail-rt/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

	libitm/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* testsuite/Makefile.in: Regenerate.

	libobjc/
	* Makefile.in (aclocal_deps): Add `toolexeclibdir.m4'.
	* aclocal.m4: Include `toolexeclibdir.m4'.
	* configure.ac: Handle `--with-toolexeclibdir='.
	* configure: Regenerate.

	liboffloadmic/
	* plugin/configure.ac: Handle `--with-toolexeclibdir='.
	* plugin/Makefile.in: Regenerate.
	* plugin/aclocal.m4: Regenerate.
	* plugin/configure: Regenerate.
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

	libphobos/
	* m4/druntime.m4: Handle `--with-toolexeclibdir='.
	* m4/Makefile.in: Regenerate.
	* libdruntime/Makefile.in: Regenerate.
	* src/Makefile.in: Regenerate.
	* testsuite/Makefile.in: Regenerate.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

	libquadmath/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

	libsanitizer/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* asan/Makefile.in: Regenerate.
	* interception/Makefile.in: Regenerate.
	* libbacktrace/Makefile.in: Regenerate.
	* lsan/Makefile.in: Regenerate.
	* sanitizer_common/Makefile.in: Regenerate.
	* tsan/Makefile.in: Regenerate.
	* ubsan/Makefile.in: Regenerate.

	libssp/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

	libstdc++-v3/
	* acinclude.m4: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* doc/Makefile.in: Regenerate.
	* include/Makefile.in: Regenerate.
	* libsupc++/Makefile.in: Regenerate.
	* po/Makefile.in: Regenerate.
	* python/Makefile.in: Regenerate.
	* src/Makefile.in: Regenerate.
	* src/c++11/Makefile.in: Regenerate.
	* src/c++17/Makefile.in: Regenerate.
	* src/c++98/Makefile.in: Regenerate.
	* src/filesystem/Makefile.in: Regenerate.
	* testsuite/Makefile.in: Regenerate.

	libvtv/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* testsuite/Makefile.in: Regenerate.

	zlib/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

From-SVN: r279813

Respect the `--enable-version-specific-runtime-libs' configuration
option in libada/, so that shared gnatlib libraries will be installed
in non-version-specific $(toolexeclibdir) if requested.  In a
cross-compilation environment this helps setting up a consistent
sysroot, which can then be shared between the host and the target
system.

This lets one have `libgnarl-10.so' and `libgnat-10.so' installed in say
/usr/lib and /usr/$(target_alias)/lib for a native and a cross-build
respectively, rather than in /usr/lib/gcc/$(target_alias)/10.0.0/adalib.

Update the settings of $(toolexecdir) and $(toolexeclibdir), unused till
now, to keep the current arrangement in the version-specific case and
make the new option to be enabled by default, unlike with the other
target libraries, so as to keep existing people's build infrastructure
unaffected.

Of course if someone does use `--disable-version-specific-runtime-libs'
already, then the installation location of shared gnatlib libraries will
change, but presumably this is what they do want anyway as the current
situation where the option is ignored in libada/ only is an anomaly
really rather than one that is expected or desired.

	gcc/ada/
	* gcc-interface/Makefile.in (ADA_RTL_DSO_DIR): New variable.
	(install-gnatlib): Use it in place of ADA_RTL_OBJ_DIR for shared
	library installation.

	libada/
	* Makefile.in (toolexecdir, toolexeclibdir): New variables.
	(LIBADA_FLAGS_TO_PASS): Add `toolexeclibdir'.
	* configure.ac: Add `--enable-version-specific-runtime-libs'.
	Update version-specific `toolexecdir' and `toolexeclibdir' from
	ADA_RTL_OBJ_DIR from gcc/ada/gcc-interface/Makefile.in.
	* configure: Regenerate.

From-SVN: r276424

From-SVN: r267494

libada/
	PR ada/88429
	* configure.ac (default_gnatlib_target): Set to gnatlib instead of
	gnatlib-plain if --disable-shared.
	* configure: Regenerate.
	* Makefile.in (all): Replace gnatlib prerequisite with libada.
	(ADA_RTS_SUBDIR): Delete.
	(libada): New target, renamed from...
	(gnatlib): ...this.  Merge with other library targets.
	(gnatlib-plain): Delete.
	(install-gnatlib): Rename to...
	(install-libada): ...this.
	(install): Replace install-gnatlib prerequisite with install-libada.
gcc/ada/
	PR ada/88429
	* gcc-interface/Makefile.in (./stamp-gnatlib1-$(RTSDIR)): Also pass
	MULTISUBDIR to sub-make and add quotes around $(THREAD_KIND).
	(gnatlib-shared-dual): Also pass PICFLAG_FOR_TARGET to sub-make.
	(gnatlib-sjlj): Also pass MULTISUBDIR to sub-make, but do not pass
	PICFLAG_FOR_TARGET.
	(gnatlib-zcx): Likewise.

From-SVN: r267034

This patch updates GCC to use autoconf 2.69 and automake 1.15.1.
(That's not the latest automake version, but it's the one used by
binutils-gdb, with which consistency is desirable, and in any case
seems a useful incremental update that should make a future update to
1.16.1 easier.)

The changes are generally similar to the binutils-gdb ones, and are
copied from there where shared files and directories are involved
(there are some further changes to such shared directories, however,
which I'd expect to apply to binutils-gdb once this patch is in GCC).
Largely, obsolete AC_PREREQ calls are removed, while many
AC_LANG_SOURCE calls are added to avoid warnings from aclocal and
autoconf.  Multilib support is no longer included in core automake,
meaning that multilib.am needs copying from automake's contrib
directory into the GCC source tree.  Autoconf 2.69 has Go support, so
local copies of that support are removed.  I hope the D support will
soon be submitted to upstream autoconf so the local copy of that can
be removed in a future update.  Changes to how automake generates
runtest calls mean quotes are removed from RUNTEST definitions in five
lib*/testsuite/Makefile.am files (libatomic, libgomp, libitm,
libphobos, libvtv; some others have RUNTEST definitions without
quotes, which are still OK); libgo and libphobos also get
-Wno-override added to AM_INIT_AUTOMAKE so those overrides of RUNTEST
do not generate automake warnings.

Note that the regeneration did not include regeneration of
fixincludes/config.h.in (attempting such regeneration resulted in all
the USED_FOR_TARGET conditionals disappearing; and I don't see
anything in the fixincludes/ directory that would result in such
conditionals being generated, unlike in the gcc/ directory).  Also
note that libvtv/testsuite/other-tests/Makefile.in was not
regenerated; that directory is not listed as a subdirectory for which
Makefile.in gets regenerated by calling "automake" in libvtv/, so I'm
not sure how it's meant to be regenerated.

While I mostly fixed warnings should running aclocal / automake /
autoconf, there were various such warnings from automake in the
libgfortran, libgo, libgomp, liboffloadmic, libsanitizer, libphobos
directories that I did not fix, preferring to leave those to the
relevant subsystem maintainers.  Specifically, most of those warnings
were of the following form (example from libgfortran):

Makefile.am:48: warning: source file 'caf/single.c' is in a subdirectory,
Makefile.am:48: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled.  For now, the corresponding output
automake: object file(s) will be placed in the top-level directory.  However,
automake: this behaviour will change in future Automake versions: they
will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.

I think it's best for the relevant maintainers to add subdir-objects
and do any other associated Makefile.am changes needed.  In some cases
the paths in the warnings involved ../; I don't know if that adds any
extra complications to the use of subdir-objects.

I've tested this with native, cross and Canadian cross builds.  The
risk of any OS-specific issues should I hope be rather lower than if a
libtool upgrade were included (we *should* do such an upgrade at some
point, but it's more complicated - it involves identifying all our
local libtool changes to see if any aren't included in the upstream
version we update to, and reverting an upstream libtool patch that's
inappropriate for use in GCC); I think it would be better to get this
update into GCC so that people can test in different configurations
and we can fix any issues found, rather than to try to get more and
more testing done before it goes in.

top level:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* multilib.am: New file.  From automake.

	Merge from binutils-gdb:
	2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>

	* libtool.m4: Use AC_LANG_SOURCE.
	* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
	* ar-lib: New file.
	* test-driver: New file.
	* configure: Re-generate.

config:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* math.m4, tls.m4: Use AC_LANG_SOURCE.

	Merge from binutils-gdb:
	2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>

	* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.

fixincludes:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.
	* aclocal.m4, configure: Regenerate.

gcc:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.  Use AC_LANG_SOURCE.  Use single
	line for second argument of AC_DEFINE_UNQUOTED.
	* doc/install.texi (Tools/packages necessary for modifying GCC):
	Update to autoconf 2.69 and automake 1.15.1.
	* aclocal.m4, config.in, configure: Regenerate.

gnattools:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.
	* configure: Regenerate.

gotools:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* config/go.m4: Remove file.
	* Makefile.am (ACLOCAL_AMFLAGS): Do not use -I ./config.
	* configure.ac:  Remove AC_PREREQ.  Do not include config/go.m4.
	* Makefile.in, aclocal.m4, configure: Regenerate.

intl:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	Merge from binutils-gdb:
	2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>

	* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
	* configure: Re-generate.
	* config.h.in: Re-generate.
	* aclocal.m4: Re-generate.

libada:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.
	* configure: Regenerate.

libatomic:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* acinclude.m4: Use AC_LANG_SOURCE.
	* configure.ac: Remove AC_PREREQ.
	* testsuite/Makefile.am (RUNTEST): Remove quotes.
	* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
	Regenerate.

libbacktrace:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* configure.ac: Remove AC_PREREQ.  Use AC_LANG_SOURCE.
	* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.

libcc1:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.
	* Makefile.in, aclocal.m4, configure: Regenerate.

libcpp:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.  Use AC_LANG_SOURCE.
	* aclocal.m4, config.in, configure: Regenerate.

libdecnumber:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	Merge from binutils-gdb:
	2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>

	* configure.ac: Remove AC_PREREQ.
	* configure: Re-generate.
	* aclocal.m4.

libffi:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	(AUTOMAKE_OPTIONS): Add info-in-builddir.
	(CLEANFILES): Remove doc/libffi.info.
	* configure.ac: Remove AC_PREREQ.
	* Makefile.in, aclocal.m4, configure, fficonfig.h.in,
	include/Makefile.in, man/Makefile.in, testsuite/Makefile.in:
	Regenerate.

libgcc:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.  Use AC_LANG_SOURCE.
	* configure: Regenerate.

libgfortran:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* configure.ac: Remove AC_PREREQ.
	* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.

libgo [logically part of this change but omitted from the commit]:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* config/go.m4: Remove file.
	* config/libtool.m4: Use AC_LANG_SOURCE.
	* configure.ac: Remove AC_PREREQ.  Use AC_LANG_SOURCE.  Use
	-Wno-override in AM_INIT_AUTOMAKE call.
	* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
	Regenerate.

libgomp:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am
	(AUTOMAKE_OPTIONS): Add info-in-builddir.
	(CLEANFILES): Remove libgomp.info.
	* configure.ac: Remove AC_PREREQ.
	* testsuite/Makefile.am (RUNTEST): Remove quotes.
	* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
	Regenerate.

libhsail-rt:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.
	* Makefile.in, aclocal.m4, configure: Regenerate.

libiberty:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	Merge from binutils-gdb:
	2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>

	* configure.ac: Remove AC_PREREQ.
	* configure: Re-generate.
	* config.in: Re-generate.

libitm:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	(AUTOMAKE_OPTIONS): Add info-in-builddir.
	(CLEANFILES): Remove libitm.info.
	* configure.ac: Remove AC_PREREQ.
	* testsuite/Makefile.am (RUNTEST): Remove quotes.
	* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
	Regenerate.

libobjc:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.
	* aclocal.m4, config.h.in, configure: Regenerate.

liboffloadmic:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* configure.ac: Remove AC_PREREQ.
	* plugin/Makefile.am: Include multilib.am.
	* plugin/configure.ac: Remove AC_PREREQ.
	* Makefile.in, aclocal.m4, configure, plugin/Makefile.in,
	plugin/aclocal.m4, plugin/configure: Regenerate.

libphobos:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* configure.ac: Remove AC_PREREQ.  Use -Wno-override in
	AM_INIT_AUTOMAKE call.
	* m4/autoconf.m4: Add extra argument to AC_LANG_DEFINE call.
	* m4/druntime/os.m4: Use AC_LANG_SOURCE.
	* testsuite/Makefile.am (RUNTEST): Remove quotes.
	* Makefile.in, aclocal.m4, configure, libdruntime/Makefile.in,
	src/Makefile.in, testsuite/Makefile.in: Regenerate.

libquadmath:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	(AUTOMAKE_OPTIONS): Remove 1.8.  Add info-in-builddir.
	(all-local): Define outside conditional code.
	(CLEANFILES): Remove libquadmath.info.
	* configure.ac: Remove AC_PREREQ.
	* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.

libsanitizer:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* configure.ac: Remove AC_PREREQ.  Use AC_LANG_SOURCE.
	* Makefile.in, aclocal.m4, asan/Makefile.in, configure,
	interception/Makefile.in, libbacktrace/Makefile.in,
	lsan/Makefile.in, sanitizer_common/Makefile.in, tsan/Makefile.in,
	ubsan/Makefile.in: Regenerate.

libssp:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	(AUTOMAKE_OPTIONS): Remove 1.9.5.
	* configure.ac: Remove AC_PREREQ.  Quote argument to
	AC_RUN_IFELSE.
	* Makefile.in, aclocal.m4, configure: Regenerate.

libstdc++-v3:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* configure.ac: Remove AC_PREREQ.
	* Makefile.in, aclocal.m4, configure, doc/Makefile.in,
	include/Makefile.in, libsupc++/Makefile.in, po/Makefile.in,
	python/Makefile.in, src/Makefile.in, src/c++11/Makefile.in,
	src/c++17/Makefile.in, src/c++98/Makefile.in,
	src/filesystem/Makefile.in, testsuite/Makefile.in: Regenerate.

libvtv:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* configure.ac: Remove AC_PREREQ.
	* testsuite/Makefile.am (RUNTEST): Remove quotes.
	* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
	Regenerate.

lto-plugin:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.  Use AC_LANG_SOURCE.
	* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.

zlib:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.

	Merge from binutils-gdb:
	2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>

	* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
	* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign.
	* Makefile.in: Re-generate.
	* aclocal.m4: Re-generate.
	* configure: Re-generate.

From-SVN: r265695

From-SVN: r263886

	PR jit/85384
	* acx.m4 (GCC_BASE_VER): Remove \$\$ from sed expression.

	* configure.ac (gcc-driver-name.h): Honor --with-gcc-major-version
	by using gcc_base_ver to generate a gcc_driver_version, and use
	it when generating GCC_DRIVER_NAME.
	* configure: Regenerate.

	* configure: Regenerate.

From-SVN: r259462

From-SVN: r256169

	PR ada/80921
	* configure.ac (default_gnatlib_target): Remove bogus condition.
	(have_getipinfo): Tweak.
	* configure: Regenerate.

From-SVN: r248785

	* configure.ac: Add check for sys/capability.h header.
	(have_capability): New substitution.
	* configure: Regenerate.
	* Makefile.in (GNATLIBCFLAGS_FOR_C): Add @have_capability@.

From-SVN: r248319

	PR other/79046
	* configure: Regenerated.
config/
	* acx.m4 (GCC_BASE_VER): New m4 function.
	(ACX_TOOL_DIRS): Require GCC_BASE_VER, for
	--with-gcc-major-version-only use just major number from BASE-VER.
gcc/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
	version from BASE-VER file.
	(CFLAGS-gcc.o): Add -DBASEVER=$(BASEVER_s).
	(gcc.o): Depend on $(BASEVER).
	* common.opt (dumpfullversion): New option.
	* gcc.c (driver_handle_option): Handle OPT_dumpfullversion.
	* doc/invoke.texi: Document -dumpfullversion.
	* doc/install.texi: Document --with-gcc-major-version-only.
	* configure: Regenerated.
libatomic/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* testsuite/Makefile.in: Regenerated.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libgomp/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* testsuite/Makefile.in: Regenerated.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libgcc/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
	version from BASE-VER file.
	* configure: Regenerated.
libssp/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
liboffloadmic/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* aclocal.m4: Include ../config/acx.m4.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libquadmath/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libmpx/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libada/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
	version from BASE-VER file.
	* configure: Regenerated.
lto-plugin/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libitm/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* testsuite/Makefile.in: Regenerated.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
fixincludes/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* configure: Regenerated.
libcilkrts/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* aclocal.m4: Include ../config/acx.m4.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libcc1/
	* configure.ac: Add GCC_BASE_VER.  For --with-gcc-major-version-only
	use just major number from BASE-VER.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libobjc/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* configure: Regenerated.
libstdc++-v3/
	* configure.ac: Add GCC_BASE_VER.
	* fragment.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* po/Makefile.in: Regenerated.
	* libsupc++/Makefile.in: Regenerated.
	* testsuite/Makefile.in: Regenerated.
	* src/Makefile.in: Regenerated.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
	* include/Makefile.in: Regenerated.
	* doc/Makefile.in: Regenerated.
	* python/Makefile.in: Regenerated.
	* src/c++11/Makefile.in: Regenerated.
	* src/c++98/Makefile.in: Regenerated.
	* src/filesystem/Makefile.in: Regenerated.
libvtv/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* testsuite/Makefile.in: Regenerated.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libsanitizer/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* libbacktrace/Makefile.in: Regenerated.
	* interception/Makefile.in: Regenerated.
	* asan/Makefile.in: Regenerated.
	* ubsan/Makefile.in: Regenerated.
	* configure: Regenerated.
	* sanitizer_common/Makefile.in: Regenerated.
	* lsan/Makefile.in: Regenerated.
	* Makefile.in: Regenerated.
	* tsan/Makefile.in: Regenerated.
libgfortran/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* configure: Regenerated.
	* Makefile.in: Regenerated.

From-SVN: r244521

Also fix a stray changelog entry.  Some of the regen here is due to
previous changes not being regenerated properly, in part due to the
missing configure dependencies.

	* configure: Regenerate.
config/
	* picflag.m4: Remove stray \xA0 in comment.
gcc/
	* Makefile.in (aclocal_deps): Update and order as per aclocal.m4.
	* configure: Regenerate.
	* config.in: Regenerate.
libada/
	* Makefile.in (configure_deps): Update and order as per
	configure.ac sinclude.
	* configure: Regenerate.
libgcc/
	* Makefile.in (configure_deps): Update.
	* configure: Regenerate.
libiberty/
	* Makefile.in (configure_deps): Update.
	* configure: Regenerate.
libitm/
	* Makefile.in: Regenerate.
	* testsuite/Makefile.in: Regenerate.

From-SVN: r244049

From-SVN: r243994

<toplevel>

2016-11-15  Matthias Klose  <doko@ubuntu.com>

	* config-ml.in: Remove references to GCJ.
	* configure.ac: Likewise.
	* configure: Regenerate.

config/

2016-11-15  Matthias Klose  <doko@ubuntu.com>

	multi.m4: Don't set GCJ.

gcc/

2016-11-15  Matthias Klose  <doko@ubuntu.com>

	* doc/install.texi: Remove references to gcj/libjava.
	* doc/invoke.texi: Likewise.

*/ (where necessary)

2016-11-15  Matthias Klose  <doko@ubuntu.com>

	* configure: Regenerate.

From-SVN: r242433

/
	* config.guess:  Remove SH5 support.
	* config.sub: Likewise.
	* configure: Likewise.
	* configure.ac: Likewise.

config/
	* picflag.m4:  Remove SH5 support.

gcc/
	* config/sh/t-sh: Remove SH5 support.
	* config.gcc: Likewise.
	* configure: Likewise.

contrib/
	* compare-all-tests: Remove SH5 support.
	* config-list.mk: Likewise.

libada/
	* configure: Remove SH5 support.

libgcc/
	* config.host: Remove SH5 support.
	* configure: Likewise.

libiberty/
	* configure: Remove SH5 support.

libjava/
	* classpath/config.guess: Remove SH5 support.
	* classpath/config.sub: Likewise.

From-SVN: r235676

From-SVN: r232055

re PR target/65351 (libiberty's pic version contains non-pic code on m32 darwin; causes bootstrap fail building libcc1.)

	PR target/65351
config/
	* mh-darwin: Only apply -mdynamic-no-pic for m32 Darwin when the compiler in
	use supports -mno-dynamic-no-pic.
	* picflag.m4: Only append -mno-dynamic-no-pic for Darwin when -mdynamic-no-pic
	is present in CFLAGS.

libiberty/
	* configure: Regenerate.
libada/
	* configure: Regenerate.
libgcc/
	* configure: Regenerate.
gcc/
	* configure: Regenerate.


Co-Authored-By: Iain Sandoe <iain@codesourcery.com>

From-SVN: r221967

re PR target/65351 (libiberty's pic version contains non-pic code on m32 darwin; causes bootstrap fail building libcc1.)

	PR target/65351
config/
	* picflag.m4: Append -mno-dynamic-no-pic for Darwin.
libiberty/
	* configure: Regenerate.
libada/
	* configure: Regenerate.
libgcc/
	* configure: Regenerate.
gcc/
	* configure: Regenerate.

Co-Authored-By: Iain Sandoe <iain@codesourcery.com>

From-SVN: r221891

From-SVN: r219188

2014-08-12  Joel Sherrill <joel.sherrill@oarcorp.com>

	* Makefile.in: Add CFLAGS_FOR_TARGET to GNATLIBCFLAGS_FOR_C.

From-SVN: r213880

From-SVN: r206290

config/
* picflag.m4 (m68k-*-*): Use default PIC flag.

gcc/
* configure: Regenerate.

libada/
* configure: Regenerate.

libgcc/
* configure: Regenerate.

libiberty/
* configure: Regenerate.

From-SVN: r204854

	* configure: Regenerated.

From-SVN: r197178