When defaulting CET run-time support to auto, check if -fcf-protection
works.  Even if the stage1 GCC doesn't support -fcf-protection, since
the final GCC does, CET run-time support will be enabled by default if
binutils support CET.

config/

	PR bootstrap/95147
	* cet.m4 (GCC_CET_FLAGS): Also check if -fcf-protection works
	when defaulting to auto.

libatomic/

	PR bootstrap/95147
	* configure: Regenerated.

libbacktrace/

	PR bootstrap/95147
	* configure: Regenerated.

libgcc/

	PR bootstrap/95147
	* configure: Regenerated.

libgfortran/

	PR bootstrap/95147
	* configure: Regenerated.

libgomp/

	PR bootstrap/95147
	* configure: Regenerated.

libitm/

	PR bootstrap/95147
	* configure: Regenerated.

libobjc/

	PR bootstrap/95147
	* configure: Regenerated.

libphobos/

	PR bootstrap/95147
	* configure: Regenerated.

libquadmath/

	PR bootstrap/95147
	* configure: Regenerated.

libsanitizer/

	PR bootstrap/95147
	* configure: Regenerated.

libssp/

	PR bootstrap/95147
	* configure: Regenerated.

libstdc++-v3/

	PR bootstrap/95147
	* configure: Regenerated.

libvtv/

	PR bootstrap/95147
	* configure: Regenerated.

zlib/

	PR bootstrap/95147
	* configure: Regenerated.

CET has been added since GCC 8.  This patch defaults CET run-time support
to auto.  It enables CET run-time support if asssembler supports CET
instructions and multi-byte NOPs are enabled via SSE2.

config/

	* cet.m4 (GCC_CET_FLAGS): Change default to auto.

gcc/

	* configure: Regenerated.

libatomic/

	* configure: Regenerated.

libbacktrace/

	* configure: Regenerated.

libcc1/

	* configure: Regenerated.

libcpp/

	* configure: Regenerated.

libdecnumber/

	* configure: Regenerated.

libgcc/

	* configure: Regenerated.

libgfortran/

	* configure: Regenerated.

libgomp/

	* configure: Regenerated.

libitm/

	* configure: Regenerated.

libobjc/

	* configure: Regenerated.

libquadmath/

	* configure: Regenerated.

libsanitizer/

	* configure: Regenerated.

libssp/

	* configure: Regenerated.

libstdc++-v3/

	* configure: Regenerated.

libvtv/

	* configure: Regenerated.

zlib/

	* configure: Regenerated.

Provide means, in the form of a `--with-toolexeclibdir=' configuration
option, to override the default installation directory for target
libraries, otherwise known as $toolexeclibdir.  This is so that it is
possible to get newly-built libraries, particularly the shared ones,
installed in a common place, so that they can be readily used by the
target system as their host libraries, possibly over NFS, without a need
to manually copy them over from the currently hardcoded location they
would otherwise be installed in.

In the presence of the `--enable-version-specific-runtime-libs' option
and for configurations building native GCC the option is ignored.

	config/
	* toolexeclibdir.m4: New file.

	gcc/
	* doc/install.texi (Cross-Compiler-Specific Options): Document
	`--with-toolexeclibdir' option.

	libada/
	* Makefile.in (configure_deps): Add `toolexeclibdir.m4'.
	* configure.ac: Handle `--with-toolexeclibdir='.
	* configure: Regenerate.

	libatomic/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* testsuite/Makefile.in: Regenerate.

	libffi/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* include/Makefile.in: Regenerate.
	* man/Makefile.in: Regenerate.
	* testsuite/Makefile.in: Regenerate.

	libgcc/
	* Makefile.in (configure_deps): Add `toolexeclibdir.m4'.
	* configure.ac: Handle `--with-toolexeclibdir='.
	* configure: Regenerate.

	libgfortran/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

	libgomp/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* testsuite/Makefile.in: Regenerate.

	libhsail-rt/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

	libitm/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* testsuite/Makefile.in: Regenerate.

	libobjc/
	* Makefile.in (aclocal_deps): Add `toolexeclibdir.m4'.
	* aclocal.m4: Include `toolexeclibdir.m4'.
	* configure.ac: Handle `--with-toolexeclibdir='.
	* configure: Regenerate.

	liboffloadmic/
	* plugin/configure.ac: Handle `--with-toolexeclibdir='.
	* plugin/Makefile.in: Regenerate.
	* plugin/aclocal.m4: Regenerate.
	* plugin/configure: Regenerate.
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

	libphobos/
	* m4/druntime.m4: Handle `--with-toolexeclibdir='.
	* m4/Makefile.in: Regenerate.
	* libdruntime/Makefile.in: Regenerate.
	* src/Makefile.in: Regenerate.
	* testsuite/Makefile.in: Regenerate.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

	libquadmath/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

	libsanitizer/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* asan/Makefile.in: Regenerate.
	* interception/Makefile.in: Regenerate.
	* libbacktrace/Makefile.in: Regenerate.
	* lsan/Makefile.in: Regenerate.
	* sanitizer_common/Makefile.in: Regenerate.
	* tsan/Makefile.in: Regenerate.
	* ubsan/Makefile.in: Regenerate.

	libssp/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

	libstdc++-v3/
	* acinclude.m4: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* doc/Makefile.in: Regenerate.
	* include/Makefile.in: Regenerate.
	* libsupc++/Makefile.in: Regenerate.
	* po/Makefile.in: Regenerate.
	* python/Makefile.in: Regenerate.
	* src/Makefile.in: Regenerate.
	* src/c++11/Makefile.in: Regenerate.
	* src/c++17/Makefile.in: Regenerate.
	* src/c++98/Makefile.in: Regenerate.
	* src/filesystem/Makefile.in: Regenerate.
	* testsuite/Makefile.in: Regenerate.

	libvtv/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* testsuite/Makefile.in: Regenerate.

	zlib/
	* configure.ac: Handle `--with-toolexeclibdir='.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

From-SVN: r279813

A change made with r275564 ("[ARM/FDPIC v6 02/24] [ARM] FDPIC: Handle 
arm*-*-uclinuxfdpiceabi in configure scripts") to libtool.m4 has not 
regenerated all the `configure' scripts affected.  Fix it.

	gcc/
	* configure: Regenerate.

	libatomic/
	* configure: Regenerate.

	libbacktrace/
	* configure: Regenerate.

	libcc1/
	* configure: Regenerate.

	libffi/
	* configure: Regenerate.

	libgfortran/
	* configure: Regenerate.

	libgomp/
	* configure: Regenerate.

	libhsail-rt/
	* configure: Regenerate.

	libitm/
	* configure: Regenerate.

	libobjc/
	* configure: Regenerate.

	liboffloadmic/
	* configure: Regenerate.

	libphobos/
	* configure: Regenerate.

	libquadmath/
	* configure: Regenerate.

	libsanitizer/
	* configure: Regenerate.

	libssp/
	* configure: Regenerate.

	libstdc++-v3/
	* configure: Regenerate.

	libvtv/
	* configure: Regenerate.

	lto-plugin/
	* configure: Regenerate.

	zlib/
	* configure: Regenerate.

From-SVN: r276213

2019-02-19  Caroline Tice <cmtice@google.com>

	Fix testsuite
	* testsuite/libvtv.cc/const_vtable.cc (main): Fix function signature.

From-SVN: r269041

From-SVN: r267494

This patch updates GCC to use autoconf 2.69 and automake 1.15.1.
(That's not the latest automake version, but it's the one used by
binutils-gdb, with which consistency is desirable, and in any case
seems a useful incremental update that should make a future update to
1.16.1 easier.)

The changes are generally similar to the binutils-gdb ones, and are
copied from there where shared files and directories are involved
(there are some further changes to such shared directories, however,
which I'd expect to apply to binutils-gdb once this patch is in GCC).
Largely, obsolete AC_PREREQ calls are removed, while many
AC_LANG_SOURCE calls are added to avoid warnings from aclocal and
autoconf.  Multilib support is no longer included in core automake,
meaning that multilib.am needs copying from automake's contrib
directory into the GCC source tree.  Autoconf 2.69 has Go support, so
local copies of that support are removed.  I hope the D support will
soon be submitted to upstream autoconf so the local copy of that can
be removed in a future update.  Changes to how automake generates
runtest calls mean quotes are removed from RUNTEST definitions in five
lib*/testsuite/Makefile.am files (libatomic, libgomp, libitm,
libphobos, libvtv; some others have RUNTEST definitions without
quotes, which are still OK); libgo and libphobos also get
-Wno-override added to AM_INIT_AUTOMAKE so those overrides of RUNTEST
do not generate automake warnings.

Note that the regeneration did not include regeneration of
fixincludes/config.h.in (attempting such regeneration resulted in all
the USED_FOR_TARGET conditionals disappearing; and I don't see
anything in the fixincludes/ directory that would result in such
conditionals being generated, unlike in the gcc/ directory).  Also
note that libvtv/testsuite/other-tests/Makefile.in was not
regenerated; that directory is not listed as a subdirectory for which
Makefile.in gets regenerated by calling "automake" in libvtv/, so I'm
not sure how it's meant to be regenerated.

While I mostly fixed warnings should running aclocal / automake /
autoconf, there were various such warnings from automake in the
libgfortran, libgo, libgomp, liboffloadmic, libsanitizer, libphobos
directories that I did not fix, preferring to leave those to the
relevant subsystem maintainers.  Specifically, most of those warnings
were of the following form (example from libgfortran):

Makefile.am:48: warning: source file 'caf/single.c' is in a subdirectory,
Makefile.am:48: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled.  For now, the corresponding output
automake: object file(s) will be placed in the top-level directory.  However,
automake: this behaviour will change in future Automake versions: they
will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.

I think it's best for the relevant maintainers to add subdir-objects
and do any other associated Makefile.am changes needed.  In some cases
the paths in the warnings involved ../; I don't know if that adds any
extra complications to the use of subdir-objects.

I've tested this with native, cross and Canadian cross builds.  The
risk of any OS-specific issues should I hope be rather lower than if a
libtool upgrade were included (we *should* do such an upgrade at some
point, but it's more complicated - it involves identifying all our
local libtool changes to see if any aren't included in the upstream
version we update to, and reverting an upstream libtool patch that's
inappropriate for use in GCC); I think it would be better to get this
update into GCC so that people can test in different configurations
and we can fix any issues found, rather than to try to get more and
more testing done before it goes in.

top level:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* multilib.am: New file.  From automake.

	Merge from binutils-gdb:
	2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>

	* libtool.m4: Use AC_LANG_SOURCE.
	* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
	* ar-lib: New file.
	* test-driver: New file.
	* configure: Re-generate.

config:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* math.m4, tls.m4: Use AC_LANG_SOURCE.

	Merge from binutils-gdb:
	2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>

	* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.

fixincludes:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.
	* aclocal.m4, configure: Regenerate.

gcc:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.  Use AC_LANG_SOURCE.  Use single
	line for second argument of AC_DEFINE_UNQUOTED.
	* doc/install.texi (Tools/packages necessary for modifying GCC):
	Update to autoconf 2.69 and automake 1.15.1.
	* aclocal.m4, config.in, configure: Regenerate.

gnattools:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.
	* configure: Regenerate.

gotools:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* config/go.m4: Remove file.
	* Makefile.am (ACLOCAL_AMFLAGS): Do not use -I ./config.
	* configure.ac:  Remove AC_PREREQ.  Do not include config/go.m4.
	* Makefile.in, aclocal.m4, configure: Regenerate.

intl:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	Merge from binutils-gdb:
	2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>

	* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
	* configure: Re-generate.
	* config.h.in: Re-generate.
	* aclocal.m4: Re-generate.

libada:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.
	* configure: Regenerate.

libatomic:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* acinclude.m4: Use AC_LANG_SOURCE.
	* configure.ac: Remove AC_PREREQ.
	* testsuite/Makefile.am (RUNTEST): Remove quotes.
	* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
	Regenerate.

libbacktrace:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* configure.ac: Remove AC_PREREQ.  Use AC_LANG_SOURCE.
	* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.

libcc1:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.
	* Makefile.in, aclocal.m4, configure: Regenerate.

libcpp:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.  Use AC_LANG_SOURCE.
	* aclocal.m4, config.in, configure: Regenerate.

libdecnumber:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	Merge from binutils-gdb:
	2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>

	* configure.ac: Remove AC_PREREQ.
	* configure: Re-generate.
	* aclocal.m4.

libffi:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	(AUTOMAKE_OPTIONS): Add info-in-builddir.
	(CLEANFILES): Remove doc/libffi.info.
	* configure.ac: Remove AC_PREREQ.
	* Makefile.in, aclocal.m4, configure, fficonfig.h.in,
	include/Makefile.in, man/Makefile.in, testsuite/Makefile.in:
	Regenerate.

libgcc:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.  Use AC_LANG_SOURCE.
	* configure: Regenerate.

libgfortran:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* configure.ac: Remove AC_PREREQ.
	* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.

libgo [logically part of this change but omitted from the commit]:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* config/go.m4: Remove file.
	* config/libtool.m4: Use AC_LANG_SOURCE.
	* configure.ac: Remove AC_PREREQ.  Use AC_LANG_SOURCE.  Use
	-Wno-override in AM_INIT_AUTOMAKE call.
	* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
	Regenerate.

libgomp:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am
	(AUTOMAKE_OPTIONS): Add info-in-builddir.
	(CLEANFILES): Remove libgomp.info.
	* configure.ac: Remove AC_PREREQ.
	* testsuite/Makefile.am (RUNTEST): Remove quotes.
	* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
	Regenerate.

libhsail-rt:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.
	* Makefile.in, aclocal.m4, configure: Regenerate.

libiberty:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	Merge from binutils-gdb:
	2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>

	* configure.ac: Remove AC_PREREQ.
	* configure: Re-generate.
	* config.in: Re-generate.

libitm:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	(AUTOMAKE_OPTIONS): Add info-in-builddir.
	(CLEANFILES): Remove libitm.info.
	* configure.ac: Remove AC_PREREQ.
	* testsuite/Makefile.am (RUNTEST): Remove quotes.
	* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
	Regenerate.

libobjc:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.
	* aclocal.m4, config.h.in, configure: Regenerate.

liboffloadmic:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* configure.ac: Remove AC_PREREQ.
	* plugin/Makefile.am: Include multilib.am.
	* plugin/configure.ac: Remove AC_PREREQ.
	* Makefile.in, aclocal.m4, configure, plugin/Makefile.in,
	plugin/aclocal.m4, plugin/configure: Regenerate.

libphobos:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* configure.ac: Remove AC_PREREQ.  Use -Wno-override in
	AM_INIT_AUTOMAKE call.
	* m4/autoconf.m4: Add extra argument to AC_LANG_DEFINE call.
	* m4/druntime/os.m4: Use AC_LANG_SOURCE.
	* testsuite/Makefile.am (RUNTEST): Remove quotes.
	* Makefile.in, aclocal.m4, configure, libdruntime/Makefile.in,
	src/Makefile.in, testsuite/Makefile.in: Regenerate.

libquadmath:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	(AUTOMAKE_OPTIONS): Remove 1.8.  Add info-in-builddir.
	(all-local): Define outside conditional code.
	(CLEANFILES): Remove libquadmath.info.
	* configure.ac: Remove AC_PREREQ.
	* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.

libsanitizer:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* configure.ac: Remove AC_PREREQ.  Use AC_LANG_SOURCE.
	* Makefile.in, aclocal.m4, asan/Makefile.in, configure,
	interception/Makefile.in, libbacktrace/Makefile.in,
	lsan/Makefile.in, sanitizer_common/Makefile.in, tsan/Makefile.in,
	ubsan/Makefile.in: Regenerate.

libssp:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	(AUTOMAKE_OPTIONS): Remove 1.9.5.
	* configure.ac: Remove AC_PREREQ.  Quote argument to
	AC_RUN_IFELSE.
	* Makefile.in, aclocal.m4, configure: Regenerate.

libstdc++-v3:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* configure.ac: Remove AC_PREREQ.
	* Makefile.in, aclocal.m4, configure, doc/Makefile.in,
	include/Makefile.in, libsupc++/Makefile.in, po/Makefile.in,
	python/Makefile.in, src/Makefile.in, src/c++11/Makefile.in,
	src/c++17/Makefile.in, src/c++98/Makefile.in,
	src/filesystem/Makefile.in, testsuite/Makefile.in: Regenerate.

libvtv:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.
	* configure.ac: Remove AC_PREREQ.
	* testsuite/Makefile.am (RUNTEST): Remove quotes.
	* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
	Regenerate.

lto-plugin:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.  Use AC_LANG_SOURCE.
	* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.

zlib:
2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* Makefile.am: Include multilib.am.

	Merge from binutils-gdb:
	2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>

	* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
	* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign.
	* Makefile.in: Re-generate.
	* aclocal.m4: Re-generate.
	* configure: Re-generate.

From-SVN: r265695

From-SVN: r263886

2018-05-02  Tom de Vries  <tom@codesourcery.com>

	PR testsuite/85106
	* gcc.dg/ipa/ipa-icf-38.c: Use scan-ltrans-tree-dump.
	* lib/scanltranstree.exp: New file.
	* lib/target-supports.exp (scan-ltrans-tree-dump_required_options)
	(scan-ltrans-tree-dump-times_required_options)
	(scan-ltrans-tree-dump-not_required_options)
	(scan-ltrans-tree-dump-dem_required_options)
	(scan-ltrans-tree-dump-dem-not_required_options): New proc.
	* lib/gcc-dg.exp: Include scanltranstree.exp.

	* testsuite/lib/libatomic.exp: Include scanltranstree.exp.

	* testsuite/lib/libgomp.exp: Include scanltranstree.exp.

	* testsuite/lib/libitm.exp: Include scanltranstree.exp.

	* testsuite/lib/libvtv.exp: Include scanltranstree.exp.

	* doc/sourcebuild.texi (Commands for use in dg-final, Scan optimization
	dump files): Add ltrans-tree.

From-SVN: r259838

2018-05-02  Tom de Vries  <tom@codesourcery.com>

	PR testsuite/85106
	* gcc.dg/ipa/ipa-icf-38.c: New test.
	* gcc.dg/ipa/ipa-icf-38a.c: New test.
	* lib/scandump.exp (dump-base): New proc.
	(scan-dump, scan-dump-times, scan-dump-not, scan-dump-dem)
	(scan-dump-dem-not): Add and handle parameter for suffix of the dump
	base.
	* lib/scanipa.exp: Add "" argument to scan-dump calls.
	* lib/scanlang.exp: Same.
	* lib/scanrtl.exp: Same.
	* lib/scantree.exp: Same.
	* lib/scanwpaipa.exp: New file.
	* lib/gcc-dg.exp: Include scanwpaipa.exp.

	* testsuite/lib/libatomic.exp: Include scanwpaipa.exp.

	* testsuite/lib/libgomp.exp: Include scanwpaipa.exp.

	* testsuite/lib/libitm.exp: Include scanwpaipa.exp.

	* testsuite/lib/libvtv.exp: Include scanwpaipa.exp.

	* doc/sourcebuild.texi (Commands for use in dg-final, Scan optimization
	dump files): Add wpa-ipa.

From-SVN: r259837

	* configure: Regenerated.

From-SVN: r259610

cet.m4 (GCC_CET_FLAGS): Default to --disable-cet, replace --enable-cet=default with --enable-cet=auto.

	* config/cet.m4 (GCC_CET_FLAGS): Default to --disable-cet, replace
	--enable-cet=default with --enable-cet=auto.

	* doc/install.texi: Document --disable-cet being the default and
	--enable-cet=auto.

	* configure: Regenerated.

From-SVN: r259487

	PR jit/85384
	* acx.m4 (GCC_BASE_VER): Remove \$\$ from sed expression.

	* configure.ac (gcc-driver-name.h): Honor --with-gcc-major-version
	by using gcc_base_ver to generate a gcc_driver_version, and use
	it when generating GCC_DRIVER_NAME.
	* configure: Regenerate.

	* configure: Regenerate.

From-SVN: r259462

ENDBR32 and RDSSPD are multi-byte NOPs on x86-64 processors and
newer x86 processors, starting Pentium Pro.  They are UD on older
32-bit processors. Detect this at configure time and adjust the
default value for enable_cet. GCC will enable CET in 32-bit run-time
libraries in any case if --enable-cet is used to configure GCC.

	PR target/84148
	* config/cet.m4: Check if target support multi-byte NOPS (SSE).
	* libatomic/configure: Regenerate.
	* libbacktrace/configure: Likewise.
	* libgcc/configure: Likewise.
	* libgfortran/configure: Likewise.
	* libgomp/configure: Likewise.
	* libitm/configure: Likewise.
	* libmpx/configure: Likewise.
	* libobjc/configure: Likewise.
	* libquadmath/configure: Likewise.
	* libsanitizer/configure: Likewise.
	* libssp/configure: Likewise.
	* libstdc++-v3/configure: Likewise.
	* libvtv/configure: Likewise.

From-SVN: r257809

From-SVN: r256169

libvtv/
	* acinclude.m4: Add enable.m4 and cet.m4.
	* Makefile.in: Regenerate.
	* testsuite/Makefile.in: Likewise.
	* configure: Likewise.
	* configure.ac: Set CET_FLAGS. Update XCFLAGS.
	* testsuite/libvtv.cc/vtv.exp: Add scanlang.exp.

From-SVN: r254897

	PR other/79046
libatomic/
	* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
	of cat to get version from BASE-VER file.
	* testsuite/Makefile.in: Regenerated.
libffi/
	* configure.ac: Add GCC_BASE_VER.
	* include/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
	of cat to get version from BASE-VER file.
	* configure: Regenerated.
	* testsuite/Makefile.in: Regenerated.
	* include/Makefile.in: Regenerated.
	* Makefile.in: Regenerated.
	* man/Makefile.in: Regenerated.
libgomp/
	* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
	of cat to get version from BASE-VER file.
	* testsuite/Makefile.in: Regenerated.
libitm/
	* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
	of cat to get version from BASE-VER file.
	* testsuite/Makefile.in: Regenerated.
libmpx/
	* mpxrt/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
	of cat to get version from BASE-VER file.
	* mpxwrap/Makefile.am (gcc_version): Likewise.
	* mpxrt/Makefile.in: Regenerated.
	* mpxwrap/Makefile.in: Regenerated.
liboffloadmic/
	* plugin/configure.ac: Add GCC_BASE_VER.
	* plugin/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
	of cat to get version from BASE-VER file.
	* plugin/configure: Regenerated.
	* plugin/aclocal.m4: Regenerated.
	* plugin/Makefile.in: Regenerated.
libsanitizer/
	* interception/Makefile.am (gcc_version): Use @get_gcc_base_ver@
	instead of cat to get version from BASE-VER file.
	* asan/Makefile.am (gcc_version): Likewise.
	* ubsan/Makefile.am (gcc_version): Likewise.
	* sanitizer_common/Makefile.am (gcc_version): Likewise.
	* lsan/Makefile.am (gcc_version): Likewise.
	* tsan/Makefile.am (gcc_version): Likewise.
	* interception/Makefile.in: Regenerated.
	* asan/Makefile.in: Regenerated.
	* ubsan/Makefile.in: Regenerated.
	* sanitizer_common/Makefile.in: Regenerated.
	* lsan/Makefile.in: Regenerated.
	* tsan/Makefile.in: Regenerated.
libvtv/
	* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
	of cat to get version from BASE-VER file.
	* testsuite/Makefile.in: Regenerated.

From-SVN: r244742

	PR other/79046
	* configure: Regenerated.
config/
	* acx.m4 (GCC_BASE_VER): New m4 function.
	(ACX_TOOL_DIRS): Require GCC_BASE_VER, for
	--with-gcc-major-version-only use just major number from BASE-VER.
gcc/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
	version from BASE-VER file.
	(CFLAGS-gcc.o): Add -DBASEVER=$(BASEVER_s).
	(gcc.o): Depend on $(BASEVER).
	* common.opt (dumpfullversion): New option.
	* gcc.c (driver_handle_option): Handle OPT_dumpfullversion.
	* doc/invoke.texi: Document -dumpfullversion.
	* doc/install.texi: Document --with-gcc-major-version-only.
	* configure: Regenerated.
libatomic/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* testsuite/Makefile.in: Regenerated.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libgomp/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* testsuite/Makefile.in: Regenerated.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libgcc/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
	version from BASE-VER file.
	* configure: Regenerated.
libssp/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
liboffloadmic/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* aclocal.m4: Include ../config/acx.m4.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libquadmath/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libmpx/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libada/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
	version from BASE-VER file.
	* configure: Regenerated.
lto-plugin/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libitm/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* testsuite/Makefile.in: Regenerated.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
fixincludes/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* configure: Regenerated.
libcilkrts/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* aclocal.m4: Include ../config/acx.m4.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libcc1/
	* configure.ac: Add GCC_BASE_VER.  For --with-gcc-major-version-only
	use just major number from BASE-VER.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libobjc/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* configure: Regenerated.
libstdc++-v3/
	* configure.ac: Add GCC_BASE_VER.
	* fragment.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* po/Makefile.in: Regenerated.
	* libsupc++/Makefile.in: Regenerated.
	* testsuite/Makefile.in: Regenerated.
	* src/Makefile.in: Regenerated.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
	* include/Makefile.in: Regenerated.
	* doc/Makefile.in: Regenerated.
	* python/Makefile.in: Regenerated.
	* src/c++11/Makefile.in: Regenerated.
	* src/c++98/Makefile.in: Regenerated.
	* src/filesystem/Makefile.in: Regenerated.
libvtv/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* testsuite/Makefile.in: Regenerated.
	* configure: Regenerated.
	* Makefile.in: Regenerated.
libsanitizer/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* libbacktrace/Makefile.in: Regenerated.
	* interception/Makefile.in: Regenerated.
	* asan/Makefile.in: Regenerated.
	* ubsan/Makefile.in: Regenerated.
	* configure: Regenerated.
	* sanitizer_common/Makefile.in: Regenerated.
	* lsan/Makefile.in: Regenerated.
	* Makefile.in: Regenerated.
	* tsan/Makefile.in: Regenerated.
libgfortran/
	* configure.ac: Add GCC_BASE_VER.
	* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
	get version from BASE-VER file.
	* configure: Regenerated.
	* Makefile.in: Regenerated.

From-SVN: r244521

From-SVN: r244052

<toplevel>

2016-11-15  Matthias Klose  <doko@ubuntu.com>

	* config-ml.in: Remove references to GCJ.
	* configure.ac: Likewise.
	* configure: Regenerate.

config/

2016-11-15  Matthias Klose  <doko@ubuntu.com>

	multi.m4: Don't set GCJ.

gcc/

2016-11-15  Matthias Klose  <doko@ubuntu.com>

	* doc/install.texi: Remove references to gcj/libjava.
	* doc/invoke.texi: Likewise.

*/ (where necessary)

2016-11-15  Matthias Klose  <doko@ubuntu.com>

	* configure: Regenerate.

From-SVN: r242433

	* Makefile.am (toolexeclib_LTLIBRARIES): Only set if
	ENABLE_VTABLE_VERIFY.
	Simplify.
	* Makefile.in: Regenerate.

From-SVN: r235772

2015-12-02  Matthias Klose  <doko@ubuntu.com>

        * configure.ac: Move AM_ENABLE_MULTILIB before
        GCC_LIBSTDCXX_RAW_CXX_FLAGS.
        * configure: Regenerate.

From-SVN: r231193

	libstdc++-v3:
	* acinclude.m4 (GLIBCXX_ENABLE_VTABLE_VERIFY) <solaris2*>: Use
	-Wl,-R in VTV_CXXLINKFLAGS.
	* configure: Regenerate.

	* testsuite/18_support/bad_exception/23591_thread-1.c: Use
	-fvtable-verify=none on Solaris 12+.

	libgcc:
	* Makefile.in (VTV_CFLAGS): New variable.
	(vtv_start$(objext), vtv_end$(objext), vtv_end$(objext))
	(vtv_start_preinit$(objext), vtv_end_preinit$(objext)): Use it.
	* config.host (*-*-solaris2*): Add t-crtstuff-pic to tmake_file.
	Add vtv_start.o, vtv_end.o, vtv_start_preinit.o, vtv_end_preinit.o
	to extra_parts if $enable_vtable_verify = yes.

	libvtv:
	* configure.tgt (*-*-solaris2.[1-9]*): Declare supported.
	* configure.ac: Call AC_USE_SYSTEM_EXTENSIONS.
	<*-*-solaris2*>: Check for init priority support.
	Check for getexecname, __fortify_fail, _obstack_begin.
	(VTV_NO_OBSTACK): New conditional.
	* configure: Regenerate.
	* Makefile.am [VTV_NO_OBSTACK] (obstack.c): Use new condition.
	Create empty config.h
	* Makefile.in: Regenerate.

	* vtv_rts.cc [HAVE_GETEXECNAME] (program_invocation_name): New
	variable.
	(read_section_offset_and_length) [HAVE_GETEXECNAME]: Set it.
	(dl_iterate_phdr_callback) [HAVE_GETEXECNAME]: Set it.

	(__fortify_fail): Wrap in HAVE___FORTIFY_FAIL
	[!HAVE___FORTIFY_FAIL]: Provide non-Cygwin implementation.

	(read_section_offset_and_length): Assert sh_size >= VTV_PAGE_SIZE.
	(iterate_modules): Fix typo.
	Use VTV_PAGE_SIZE.
	(dl_iterate_phdr_callback): Fix typo.
	Use VTV_PAGE_SIZE.
	(__VLTChangePermission): Fix typos.

	include:
	* vtv-change-permission.h (VTV_PAGE_SIZE) [__sun__ && __svr4__ &&
	__sparc__]: Define.

	gcc:
	* config/sol2.h (SUPPORTS_INIT_PRIORITY): Move up.
	(STARTFILE_VTV_SPEC, ENDFILE_VTV_SPEC): Define.
	(STARTFILE_SPEC): Use %(startfile_vtv).
	(ENDFILE_SPEC): Use %(endfile_vtv).
	(SUBTARGET_EXTRA_SPECS): Handle STARTFILE_VTV_SPEC,
	ENDFILE_VTV_SPEC.

	* gcc.c (LINK_COMMAND_SPEC): Move VTABLE_VERIFICATION_SPEC after %{L*}.

From-SVN: r230865

Fixes a compile error with both old and new obstacks due to
obstack_chunk_free having the wrong signature.  Also, setting chunk
size and alignment before obstack_init is pointless since they are
overwritten.

	* vtv_malloc.cc (obstack_chunk_free): Correct param type.
	(__vtv_malloc_init): Use obstack_specify_allocation.

From-SVN: r229985

Requires fix for section anchors with VTV i.e. PR other/67868

2015-10-20  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

	* configure.tgt (aarch64*-*-linux): Enable.
	(arm*-*-linux*): Enable.

From-SVN: r229045

This patch adds an easy way to write tests for expected multiline
output.  For example we can test carets and underlines for
a particular diagnostic with:

/* { dg-begin-multiline-output "" }
 typedef struct _GMutex GMutex;
                ^~~~~~~
   { dg-end-multiline-output "" } */

multiline.exp is used by prune.exp; hence we need to load it before
prune.exp via *load_gcc_lib* for the testsuites of the various
non-"gcc" support libraries (e.g. boehm-gc).

gcc/testsuite/ChangeLog:
	* lib/multiline.exp: New file.
	* lib/prune.exp: Load multiline.exp.
	(prune_gcc_output): Call into multiline.exp to handle any
	multiline output directives.
	* lib/libgo.exp: Load multiline.exp before prune.exp, using
	load_gcc_lib.

boehm-gc/ChangeLog:
	* testsuite/lib/boehm-gc.exp: Load multiline.exp before
	prune.exp, using load_gcc_lib.

libatomic/ChangeLog:
	* testsuite/lib/libatomic.exp: Load multiline.exp before
	prune.exp, using load_gcc_lib.

libgomp/ChangeLog:
	* testsuite/lib/libgomp.exp: Load multiline.exp before prune.exp,
	using load_gcc_lib.

libitm/ChangeLog:
	* testsuite/lib/libitm.exp: Load multiline.exp before prune.exp,
	using load_gcc_lib.

libvtv/ChangeLog:
	* testsuite/lib/libvtv.exp: Load multiline.exp before prune.exp,
	using load_gcc_lib.

From-SVN: r228655

	libvtv:
	Update copyrights.

	contrib:
	* update-copyright.py (GCCCmdLine): Add libvtv.

From-SVN: r227262

re PR bootstrap/66521 (xgcc: cc1plus segfaults when compiling libstdc++-v3/src/c++11/ostream-inst.cc)

Fix PR 66521

libvtv/ChangeLog

2015-08-01  Caroline Tice  <cmtice@google.com>

        PR 66521
        * Makefile.am: Update to match latest tree.
        * Makefile.in: Regenerate.
        * testsuite/lib/libvtv: Brought up to date.
        * vtv_malloc.cc (VTV_DEBUG): Update function call to match renamed
        function (old bug!).
        * vtv_rts.cc (debug_functions, debug_init, debug_verify_vtable): Update
        initializations to work correctly with VTV_DEBUG defined.

gcc/ChangeLog:

2015-08-01  Caroline Tice  <cmtice@google.com>

        PR 66521
        * vtable-verify.c (vtbl_mangled_name_types, vtbl_mangled_name_ids): New
        global variables.
        (vtbl_find_mangled_name):  New function.
        (vtbl_register_mangled_name):  New function.
        (vtbl_map_get_node):  If DECL_ASSEMBLER_NAME is "<anon>", look up
        mangled name in mangled name vectors.
        (find_or_create_vtbl_map_node):  Ditto.
        (var_is_used_for_virtual_call_p):  Add recursion_depth parameter;
        update recursion_depth on function entry; pass it to every recursive
        call; automatically exit if depth > 25 (give up looking at that point).
        (verify_bb_vtables):  Initialize recursion_depth and pass it to
        var_is_used_for_virtual_call_p.
        * vtable-verify.h (vtbl_mangbled_name_types, vtbl_mangled_name_ids): New
        global variable decls.
        (vtbl_register_mangled_name): New extern function decl.

gcc/cp/ChangeLog:
2015-08-01  Caroline Tice  <cmtice@google.com>

        PR 66521
        * mangle.c : Add vtable-verify.h to include files.
        (get_mangled_vtable_map_var_name):  If the DECL_ASSEMBLER_NAME
        is "<anon>" get the real mangled name for the class instead, and
        also store the real mangled name in a vector for use later.

From-SVN: r226471