Makefile.tpl

.PHONY: check-target-[+module+] maybe-check-target-[+module+]
maybe-check-target-[+module+]:
@if target-[+module+]
maybe-check-target-[+module+]: check-target-[+module+]
[+ IF no_check +]
# Dummy target for uncheckable module.
check-target-[+module+]:
[+ ELSE check +]
check-target-[+module+]:
	@: $(MAKE); $(unstage)
	@r=`${PWD_COMMAND}`; export r; \
	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \[+
IF raw_cxx +]
	$(RAW_CXX_TARGET_EXPORTS) \[+
ELSE normal_cxx +]
	$(NORMAL_TARGET_EXPORTS) \[+
ENDIF raw_cxx +]
	(cd $(TARGET_SUBDIR)/[+module+] && \
	  $(MAKE) $(TARGET_FLAGS_TO_PASS) [+
	    IF raw_cxx 
	      +] 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)' [+ 
	    ENDIF raw_cxx 
	  +] [+extra_make_flags+] check)
[+ ENDIF no_check +]
@endif target-[+module+]

.PHONY: install-target-[+module+] maybe-install-target-[+module+]
maybe-install-target-[+module+]:
@if target-[+module+]
maybe-install-target-[+module+]: install-target-[+module+]
[+ IF no_install +]
# Dummy target for uninstallable.
install-target-[+module+]:
[+ ELSE install +]
install-target-[+module+]: installdirs
	@: $(MAKE); $(unstage)
	@r=`${PWD_COMMAND}`; export r; \
	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \[+
IF raw_cxx +]
	$(RAW_CXX_TARGET_EXPORTS) \[+
ELSE normal_cxx +]
	$(NORMAL_TARGET_EXPORTS) \[+
ENDIF raw_cxx +]
	(cd $(TARGET_SUBDIR)/[+module+] && \
	  $(MAKE) $(TARGET_FLAGS_TO_PASS) [+extra_make_flags+] install)
[+ ENDIF no_install +]
@endif target-[+module+]

# Other targets (info, dvi, etc.)
[+ FOR recursive_targets +]
.PHONY: maybe-[+make_target+]-target-[+module+] [+make_target+]-target-[+module+]
maybe-[+make_target+]-target-[+module+]:
@if target-[+module+]
maybe-[+make_target+]-target-[+module+]: [+make_target+]-target-[+module+]
[+ IF (match-value? = "missing" (get "make_target") ) +]
# [+module+] doesn't support [+make_target+].
[+make_target+]-target-[+module+]:
[+ ELSE +]
[+make_target+]-target-[+module+]: [+
  FOR depend +]\
    [+depend+]-target-[+module+] [+
  ENDFOR depend +]
	@: $(MAKE); $(unstage)
	@[ -f $(TARGET_SUBDIR)/[+module+]/Makefile ] || exit 0 ; \
	r=`${PWD_COMMAND}`; export r; \
	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \[+
IF raw_cxx +]
	$(RAW_CXX_TARGET_EXPORTS) \[+
ELSE normal_cxx +]
	$(NORMAL_TARGET_EXPORTS) \[+
ENDIF raw_cxx +]
	echo "Doing [+make_target+] in $(TARGET_SUBDIR)/[+module+]" ; \
	for flag in $(EXTRA_TARGET_FLAGS); do \
	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
	done; \
	(cd $(TARGET_SUBDIR)/[+module+] && \
	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
	          "RANLIB=$${RANLIB}" \
	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
	          [+extra_make_flags+] [+make_target+]) \
	  || exit 1
[+ ENDIF +]
@endif target-[+module+]
[+ ENDFOR recursive_targets +]
[+ ENDFOR target_modules +]

# ----------
# GCC module
# ----------

@if gcc-no-bootstrap
# GCC has some more recursive targets, which trigger the old
# (but still current, until the toplevel bootstrap project
# is finished) compiler bootstrapping rules.

GCC_STRAP_TARGETS = bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean bubblestrap quickstrap cleanstrap restrap
.PHONY: $(GCC_STRAP_TARGETS)
$(GCC_STRAP_TARGETS): all-prebootstrap configure-gcc
	@r=`${PWD_COMMAND}`; export r; \
	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
	$(HOST_EXPORTS) \
	echo "Bootstrapping the compiler"; \
	$(RPATH_ENVVAR)=`echo "$(TARGET_LIB_PATH)$$$(RPATH_ENVVAR)" | sed 's,:[ :]*,:,g;s,^[ :]*,,;s,:*$$,,'`; export $(RPATH_ENVVAR); \
	cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) $@
	@r=`${PWD_COMMAND}`; export r; \
	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
	case "$@" in \
	  *bootstrap4-lean ) \
	    msg="Comparing stage3 and stage4 of the compiler"; \
	    compare=compare3-lean ;; \
	  *bootstrap4 ) \
	    msg="Comparing stage3 and stage4 of the compiler"; \
	    compare=compare3 ;; \
	  *-lean ) \
	    msg="Comparing stage2 and stage3 of the compiler"; \
	    compare=compare-lean ;; \
	  * ) \
	    msg="Comparing stage2 and stage3 of the compiler"; \
	    compare=compare ;; \
	esac; \
	$(HOST_EXPORTS) \
	echo "$$msg"; \
	cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) $$compare
	@r=`${PWD_COMMAND}`; export r; \
	s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \
	echo "Building runtime libraries"; \
	$(MAKE) $(RECURSE_FLAGS_TO_PASS) all

profiledbootstrap: all-prebootstrap configure-gcc
	@r=`${PWD_COMMAND}`; export r; \
	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
	$(HOST_EXPORTS) \
	$(RPATH_ENVVAR)=`echo "$(TARGET_LIB_PATH)$$$(RPATH_ENVVAR)" | sed 's,:[ :]*,:,g;s,^[ :]*,,;s,:*$$,,'`; export $(RPATH_ENVVAR); \
	echo "Bootstrapping training compiler"; \
	cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) stageprofile_build
	@r=`${PWD_COMMAND}`; export r; \
	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
	$(HOST_EXPORTS) \
	echo "Building feedback based compiler"; \
	cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) stagefeedback_build
	@r=`${PWD_COMMAND}`; export r; \
	s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \
	echo "Building runtime libraries"; \
	$(MAKE) $(RECURSE_FLAGS_TO_PASS) all

.PHONY: cross
cross: all-build all-gas all-ld
	@r=`${PWD_COMMAND}`; export r; \
	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
	$(HOST_EXPORTS) \
	echo "Building the C and C++ compiler"; \
	cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) LANGUAGES="c c++"
	@r=`${PWD_COMMAND}`; export r; \
	s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \
	echo "Building runtime libraries"; \
	$(MAKE) $(RECURSE_FLAGS_TO_PASS) LANGUAGES="c c++" all
@endif gcc-no-bootstrap

@if gcc
.PHONY: check-gcc-c++
check-gcc-c++:
	@if [ -f ./gcc/Makefile ] ; then \
	  r=`${PWD_COMMAND}`; export r; \
	  s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
	  $(HOST_EXPORTS) \
	  (cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) check-c++); \
	else \
	  true; \
	fi

.PHONY: check-c++
check-c++: check-target-libstdc++-v3 check-gcc-c++

# Install the gcc headers files, but not the fixed include files,
# which Cygnus is not allowed to distribute.  This rule is very
# dependent on the workings of the gcc Makefile.in.
.PHONY: gcc-no-fixedincludes
gcc-no-fixedincludes:
	@if [ -f ./gcc/Makefile ]; then \
	  rm -rf gcc/tmp-include; \
	  mv gcc/include gcc/tmp-include 2>/dev/null; \
	  mkdir gcc/include; \
	  cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
	  touch gcc/stmp-fixinc gcc/include/fixed; \
	  rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
	  r=`${PWD_COMMAND}`; export r; \
	  s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \
	  $(HOST_EXPORTS) \
	  (cd ./gcc && \
	   $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
	  rm -rf gcc/include; \
	  mv gcc/tmp-include gcc/include 2>/dev/null; \
	else true; fi
@endif gcc

# ---------------------
# GCC bootstrap support
# ---------------------

# We track the current stage (the one in 'gcc') in the stage_current file.
# stage_last instead tracks the stage that was built last.  These targets
# are dummy when toplevel bootstrap is not active.

# While making host and target tools, symlinks to the final stage must be
# there, so $(unstage) should be run at various points.  To avoid excessive
# recursive invocations of make, we "inline" them using a variable.  These
# must be referenced as ": $(MAKE) ; $(unstage)" rather than "$(unstage)"
# to avoid warnings from the GNU Make job server.

unstage = :
stage = :

@if gcc-bootstrap
unstage = [ -f stage_current ] || $(MAKE) `cat stage_last`-start
stage = if [ -f stage_current ]; then $(MAKE) `cat stage_current`-end || exit 1; else :; fi
@endif gcc-bootstrap

.PHONY: unstage stage
unstage:
	@: $(MAKE); $(unstage)
stage:
	@: $(MAKE); $(stage)

# Disable commands for lean bootstrap.
LEAN = false

# We name the build directories for the various stages "stage1-gcc",
# "stage2-gcc","stage3-gcc", etc.

# Since the 'compare' process will fail (on debugging information) if any
# directory names are different, we need to link the gcc directory for
# the previous stage to a constant name ('prev-gcc'), and to make the name of
# the build directories constant as well. For the latter, we use naked names
# like 'gcc', because the scripts in that directory assume it.  We use
# mv on platforms where symlinks to directories do not work or are not
# reliable.

# 'touch' doesn't work right on some platforms.
STAMP = echo timestamp > 

# Only build the C compiler for stage1, because that is the only one that
# we can guarantee will build with the native compiler, and also it is the
# only thing useful for building stage2. STAGE1_CFLAGS (via CFLAGS),
# MAKEINFO and MAKEINFOFLAGS are explicitly passed here to make them
# overrideable (for a bootstrap build stage1 also builds gcc.info).

STAGE1_CFLAGS=@stage1_cflags@
STAGE1_LANGUAGES=@stage1_languages@

# We only want to compare .o files, so set this!
objext = .o

# Flags to pass to stage2 and later makes.
POSTSTAGE1_FLAGS_TO_PASS = \
	CC="$${CC}" CC_FOR_BUILD="$${CC_FOR_BUILD}" \
	STAGE_PREFIX=$$r/prev-gcc/ \
	CFLAGS="$(BOOT_CFLAGS)" \
	LDFLAGS="$(BOOT_LDFLAGS)" \
	ADAC="\$$(CC)"

# For stage 1:
# * We force-disable intermodule optimizations, even if
#   --enable-intermodule was passed, since the installed compiler probably
#   can't handle them.  Luckily, autoconf always respects
#   the last argument when conflicting --enable arguments are passed.
# * Likewise, we force-disable coverage flags, since the installed compiler
#   probably has never heard of them.
# * We build only C (and possibly Ada).

[+ FOR bootstrap-stage +]
.PHONY: stage[+id+]-start stage[+id+]-end

stage[+id+]-start::
	@: $(MAKE); $(stage); \
	echo stage[+id+] > stage_current ; \
	echo stage[+id+] > stage_last; \
	$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)[+
   FOR host_modules +][+ IF bootstrap +]
@if [+ module +]
	@cd $(HOST_SUBDIR); [ -d stage[+id+]-[+module+] ] || \
	  mkdir stage[+id+]-[+module+]; \
	mv stage[+id+]-[+module+] [+module+] [+ IF prev +] ; \
	mv stage[+prev+]-[+module+] prev-[+module+] || test -f stage[+prev+]-lean [+ ENDIF prev +]
@endif [+ module +][+ ENDIF bootstrap +][+ ENDFOR host_modules +]
	@[ -d stage[+id+]-$(TARGET_SUBDIR) ] || \
	  mkdir stage[+id+]-$(TARGET_SUBDIR); \
	mv stage[+id+]-$(TARGET_SUBDIR) $(TARGET_SUBDIR) [+ IF prev +] ; \
	mv stage[+prev+]-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) || test -f stage[+prev+]-lean [+ ENDIF prev +]

stage[+id+]-end:: [+ FOR host_modules +][+ IF bootstrap +]
@if [+ module +]
	@if test -d $(HOST_SUBDIR)/[+module+] ; then \
	  cd $(HOST_SUBDIR); mv [+module+] stage[+id+]-[+module+] [+ IF prev +]; \
	  mv prev-[+module+] stage[+prev+]-[+module+] ; : [+ ENDIF prev +] ; \
	fi
@endif [+ module +][+ ENDIF bootstrap +][+ ENDFOR host_modules +]
	@if test -d $(TARGET_SUBDIR) ; then \
	  mv $(TARGET_SUBDIR) stage[+id+]-$(TARGET_SUBDIR) [+ IF prev +] ; \
	  mv prev-$(TARGET_SUBDIR) stage[+prev+]-$(TARGET_SUBDIR) ; : [+ ENDIF prev +] ; \
	fi
	rm -f stage_current

# Bubble a bugfix through all the stages up to stage [+id+].  They are
# remade, but not reconfigured.  The next stage (if any) will not be
# reconfigured as well.
.PHONY: stage[+id+]-bubble
stage[+id+]-bubble:: [+ IF prev +]stage[+prev+]-bubble[+ ENDIF +]
	@r=`${PWD_COMMAND}`; export r; \
	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
	if test -f stage[+id+]-lean [+
	  IF prev +]|| test -f stage[+prev+]-lean [+ ENDIF prev +] ; then \
	  echo Skipping rebuild of stage[+id+] ; \
	else \
	  $(MAKE) stage[+id+]-start; \[+IF lean +]
	  if $(LEAN); then \
	    rm -rf stage[+lean+]-* ; \
	    $(STAMP) stage[+lean+]-lean ; \
	  fi; \[+ ENDIF lean +]
	  $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stage[+id+]; \
	fi[+ IF compare-target +]
	$(MAKE) $(RECURSE_FLAGS_TO_PASS) [+compare-target+][+ ENDIF compare-target +]

.PHONY: all-stage[+id+] clean-stage[+id+]
do-clean: clean-stage[+id+]

# FIXME: Will not need to be conditional when toplevel bootstrap is the
# only possibility, but now it conflicts with no-bootstrap rules
@if gcc-bootstrap
[+ IF compare-target +]
[+compare-target+]:
	@r=`${PWD_COMMAND}`; export r; \
	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
	if test -f stage[+prev+]-lean; then \
	  echo Cannot compare object files as stage [+prev+] was deleted. ; \
	  exit 0 ; \
	fi; \
	: $(MAKE); $(stage); \
	rm -f .bad_compare ; \
	cd stage[+id+]-gcc; \
	files=`find . -name "*$(objext)" -print` ; \
	cd .. ; \
	for file in $${files} ; do \
	  f1=$$r/stage[+prev+]-gcc/$$file; f2=$$r/stage[+id+]-gcc/$$file; \
	  @do_compare@ > /dev/null 2>&1; \
	  if test $$? -eq 1; then \
	    case $$file in \
	      ./cc*-checksum$(objext) | ./libgcc/* ) \
	        echo warning: $$file differs ;; \
	      *) \
	        echo $$file differs >> .bad_compare ;; \
	    esac ; \
	  fi ; \
	done ; \
	if [ -f .bad_compare ]; then \
	  echo "Bootstrap comparison failure!"; \
	  cat .bad_compare; \
	  exit 1; \
	else \
	  true; \
	fi ; \
	$(STAMP) [+compare-target+][+ IF prev +]
	if $(LEAN); then \
	  rm -rf stage[+prev+]-*; \
	  $(STAMP) stage[+prev+]-lean; \
	fi[+ ENDIF prev +]
[+ ENDIF compare-target +]

[+ IF bootstrap-target +]
.PHONY: [+bootstrap-target+] [+bootstrap-target+]-lean
[+bootstrap-target+]:
	echo stage[+id+] > stage_final
	@r=`${PWD_COMMAND}`; export r; \
	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
	$(MAKE) $(RECURSE_FLAGS_TO_PASS) stage[+id+]-bubble
	@: $(MAKE); $(unstage)
	@r=`${PWD_COMMAND}`; export r; \
	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
	$(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target

[+bootstrap-target+]-lean:
	echo stage[+id+] > stage_final
	@r=`${PWD_COMMAND}`; export r; \
	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
	$(MAKE) $(RECURSE_FLAGS_TO_PASS) LEAN=: stage[+id+]-bubble
	@: $(MAKE); $(unstage)
	@r=`${PWD_COMMAND}`; export r; \
	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
	$(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
[+ ENDIF bootstrap-target +]

# Rules to wipe a stage and all the following ones, also used for cleanstrap
[+ IF prev +]distclean-stage[+prev+]:: distclean-stage[+id+] [+ ENDIF prev +]
.PHONY: distclean-stage[+id+]
distclean-stage[+id+]::
	@: $(MAKE); $(stage)
	rm -rf stage[+id+]-* [+
	  IF compare-target +][+compare-target+] [+ ENDIF compare-target +]

[+ IF cleanstrap-target +]
.PHONY: [+cleanstrap-target+]
[+cleanstrap-target+]: distclean [+bootstrap-target+]
[+ ENDIF cleanstrap-target +]
@endif gcc-bootstrap

[+ ENDFOR bootstrap-stage +]

stageprofile-end::
	$(MAKE) distclean-stagefeedback

stagefeedback-start::
	@r=`${PWD_COMMAND}`; export r; \
	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
	for i in prev-*; do \
	  j=`echo $$i | sed s/^prev-//` ; \
	  cd $$r/$$i && \
	  { find . -type d | sort | sed 's,.*,$(SHELL) '"$$s"'/mkinstalldirs "../'$$j'/&",' | $(SHELL) ; } && \
	  { find . -name '*.*da' | sed 's,.*,$(LN) -f "&" "../'$$j'/&",' | $(SHELL) ; } ; \
	done

@if gcc-bootstrap
do-distclean: distclean-stage1
@endif gcc-bootstrap

# --------------------------------------
# Dependencies between different modules
# --------------------------------------

# Generic dependencies for target modules on host stuff, especially gcc
[+ FOR target_modules +][+ IF bootstrap +]
@if gcc-bootstrap[+ FOR bootstrap_stage +]
configure-stage[+id+]-target-[+module+]: maybe-all-stage[+id+]-gcc[+ ENDFOR +]
@endif gcc-bootstrap[+ ENDIF bootstrap +]
configure-target-[+module+]: maybe-all-gcc
[+ ENDFOR target_modules +]

[+ FOR lang_env_dependencies +]
configure-target-[+module+]: maybe-all-target-newlib maybe-all-target-libgloss
[+ IF cxx +]configure-target-[+module+]: maybe-all-target-libstdc++-v3
[+ ENDIF cxx +][+ ENDFOR lang_env_dependencies +]

# There are two types of dependencies here: 'hard' dependencies, where one
# module simply won't build without the other; and 'soft' dependencies, where
# if the depended-on module is missing, the depending module will do without
# or find a substitute somewhere (perhaps installed).  Soft dependencies
# are made here to depend on a 'maybe-' target.  If you're not sure,
# it's safer to use a soft dependency.

[+ ;; These Scheme functions build the bulk of the dependencies.
   ;; dep-target builds a string like "maybe-all-MODULE_KIND-gcc",
   ;; where "maybe-" is only included if HARD is true, and all-gcc
   ;; is taken from VAR-NAME.
   (define dep-target (lambda (module-kind var-name hard)
      (string-append
         (if hard "" "maybe-")
         (dep-subtarget var-name)
         module-kind
         (dep-module var-name)
      )))

   ;; make-dep builds a dependency from the MODULE and ON AutoGen vars.
   (define make-dep (lambda (module-kind on-kind)
      (string-append
         (dep-target module-kind "module" #t) ": "
         (dep-target on-kind "on" (exist? "hard")))))

   ;; dep-subtarget extracts everything up to the first dash in the given
   ;; AutoGen variable, for example it extracts "all-" out of "all-gcc".
   (define dep-subtarget (lambda (var-name)
      (substring (get var-name) 0 (+ 1 (string-index (get var-name) #\-)))))

   ;; dep-module extracts everything up to the first dash in the given
   ;; AutoGen variable, for example it extracts "gcc" out of "all-gcc".
   (define dep-module (lambda (var-name)
      (substring (get var-name) (+ 1 (string-index (get var-name) #\-)))))

   ;; dep-stage builds a string for the prefix of a bootstrap stage.
   (define dep-stage (lambda ()
      (string-append
	 "stage"
	 (get "id")
	 "-")))

   ;; dep-maybe is the same as the AutoGen expression "- hard 'maybe-'"
   ;; but is written in Scheme.
   (define dep-maybe (lambda ()
      (if (exist? "hard") "" "maybe-")))

   ;; dep-kind returns "normal" if the dependency is on an "install" target,
   ;; or if either module is not bootstrapped.  It returns "bootstrap" for
   ;; configure or build dependencies between bootstrapped modules; it returns
   ;; "prebootstrap" for configure or build dependencies of bootstrapped
   ;; modules on a build module (e.g. all-gcc on all-build-bison).  All this
   ;; is only necessary for host modules.
   (define dep-kind (lambda ()
      (if (and (hash-ref boot-modules (dep-module "module"))
	       (=* (dep-module "on") "build-"))
	  "prebootstrap"

	  (if (or (= (dep-subtarget "on") "install-")
		  (not (hash-ref boot-modules (dep-module "module")))
		  (not (hash-ref boot-modules (dep-module "on"))))
              "normal"
	      "bootstrap"))))

   ;; We now build the hash table that is used by dep-kind.
   (define boot-modules (make-hash-table 113))
+]

[+ FOR host_modules +][+
   (if (exist? "bootstrap")
       (hash-create-handle! boot-modules (get "module") #t))
   "" +][+ ENDFOR host_modules +]
[+ FOR target_modules +][+
   (if (exist? "bootstrap")
       (hash-create-handle! boot-modules (string-append "target-" (get "module")) #t))
   "" +][+ ENDFOR target_modules +]

# With all the machinery above in place, it is pretty easy to generate
# dependencies.  Host dependencies are a bit more complex because we have
# to check for bootstrap/prebootstrap dependencies.  To resolve
# prebootstrap dependencies, prebootstrap modules are gathered in
# a hash table.
[+ FOR dependencies +][+ (make-dep "" "") +]
[+ CASE (dep-kind) +]
[+ == "prebootstrap"
     +][+ FOR bootstrap_stage +]
[+ (make-dep (dep-stage) "") +][+
       ENDFOR bootstrap_stage +]
all-prebootstrap: [+ (dep-target "" "on" (exist? "hard")) +]
[+ == "bootstrap"
     +][+ FOR bootstrap_stage +]
[+ (make-dep (dep-stage) (dep-stage)) +][+
       ENDFOR bootstrap_stage +]
[+ ESAC +][+
ENDFOR dependencies +]

# Non-toplevel bootstrap rules must depend on several packages, to be built
# before gcc.  Another wart that will go away, hopefully soon.
@if gcc-no-bootstrap
[+ FOR host_modules +][+
   IF (and (not (= (get "module") "gcc"))
	   (hash-ref boot-modules (get "module"))) +]
all-prebootstrap: maybe-all-[+module+][+
   ENDIF +][+
ENDFOR host_modules +]
@endif gcc-no-bootstrap

CONFIGURE_GDB_TK = @CONFIGURE_GDB_TK@
GDB_TK = @GDB_TK@
INSTALL_GDB_TK = @INSTALL_GDB_TK@
configure-gdb: $(CONFIGURE_GDB_TK)
all-gdb: $(gdbnlmrequirements) $(GDB_TK)
install-gdb: $(INSTALL_GDB_TK)

# Serialization dependencies.  Host configures don't work well in parallel to
# each other, due to contention over config.cache.  Target configures and 
# build configures are similar.
@serialization_dependencies@

# --------------------------------
# Regenerating top level configury
# --------------------------------

# Rebuilding Makefile.in, using autogen.
AUTOGEN = autogen
$(srcdir)/Makefile.in: @MAINT@ $(srcdir)/Makefile.tpl $(srcdir)/Makefile.def
	cd $(srcdir) && $(AUTOGEN) Makefile.def

# Rebuilding Makefile.
Makefile: $(srcdir)/Makefile.in config.status
	CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status

config.status: configure
	CONFIG_SHELL="$(SHELL)" $(SHELL) ./config.status --recheck

# Rebuilding configure.
AUTOCONF = autoconf
$(srcdir)/configure: @MAINT@ $(srcdir)/configure.in $(srcdir)/config/acx.m4
	cd $(srcdir) && $(AUTOCONF)

# ------------------------------
# Special directives to GNU Make
# ------------------------------

# Don't pass command-line variables to submakes.
.NOEXPORT:
MAKEOVERRIDES=

# end of Makefile.in