[Sending to binutils, gdb-patches and gcc-patches, since it touches the
top-level Makefile/configure]

I have my debuginfod library installed in a non-standard location
(/opt/debuginfod), which requires me to set
PKG_CONFIG_PATH=/opt/debuginfod/lib/pkg-config.  If I just set it during
configure:

    $ PKG_CONFIG_PATH=/opt/debuginfod/lib/pkg-config ./configure --with-debuginfod
    $ make

or

    $ ./configure --with-debuginfod PKG_CONFIG_PATH=/opt/debuginfod/lib/pkg-config
    $ make

Then PKG_CONFIG_PATH is only present (and ignored) during the top-level
configure.  When running make (which runs gdb's and binutils'
configure), PKG_CONFIG_PATH is not set, which results in their configure
script not finding the library:

    checking for libdebuginfod >= 0.179... no
    configure: error: "--with-debuginfod was given, but libdebuginfod is missing or unusable."

Change the top-level configure/Makefile system to capture the value
passed when configuring the top-level and pass it down to
subdirectories (similar to CFLAGS, LDFLAGS, etc).

I don't know much about the top-level build system, so I really don't
know if I did this correctly.  The changes are:

 - Use AC_SUBST(PKG_CONFIG_PATH) in configure.ac, so that
   @PKG_CONFIG_PATH@ gets replaced with the actual PKG_CONFIG_PATH value
   in config files (i.e. Makefile)
 - Add a PKG_CONFIG_PATH Makefile variable in Makefile.tpl, initialized
   to @PKG_CONFIG_PATH@
 - Add PKG_CONFIG_PATH to HOST_EXPORTS in Makefile.tpl, which are the
   variables set when running the sub-configures

I initially added PKG_CONFIG_PATH to flags_to_pass, in Makefile.def, but
I don't think it's needed.  AFAIU, this defines the flags to pass down
when calling "make" in subdirectories.  We only need PKG_CONFIG_PATH to
be passed down during configure.  After that, it's captured in
gdb/config.status, so even if a "make" causes a re-configure later
(because gdb/configure has changed, for example), the PKG_CONFIG_PATH
value will be remembered.

Change-Id: I91138dfca41c43b05e53e445f62e4b27882536bf

ChangeLog:

	* configure.ac: Add AC_SUBST(PKG_CONFIG_PATH).
	* configure: Re-generate.
	* Makefile.tpl (HOST_EXPORTS): Pass PKG_CONFIG_PATH.
	(PKG_CONFIG_PATH): New.
	* Makefile.in: Re-generate.

With a recent import of gnulib, code has been pulled that tests and enables
64-bit time_t by default on 32-bit hosts that support it.

Although gdb can use the gnulib support, bfd doesn't use gnulib and currently
doesn't do these checks.

As a consequence, if we have a 32-bit host that supports 64-bit time_t, we'll
have a mismatch between gdb's notion of time_t and bfd's notion of time_t.

This will lead to mismatches in the struct stat size, leading to memory
corruption and crashes.

This patch disables the year 2038 check for now, which makes things work
reliably again.

I'd consider this a temporary fix until we have proper bfd checks for the year
2038, if it makes sense.  64-bit hosts seems to be more common these days, so
I'm not sure how important it is to have this support enabled and how soon
we want to enable it.

Thoughts?

ChangeLog:

	* configure.ac: Disable year2038 by default on 32-bit hosts.
	* configure: Regenerate.

ChangeLog:

	* Makefile.def: Add gprofng module.
	* configure.ac: Add --enable-gprofng option.
	* Makefile.in: Regenerate.
	* configure: Regenerate.

include/ChangeLog:

	* collectorAPI.h: New file.
	* libcollector.h: New file.
	* libfcollector.h: New file.

ChangeLog:

	* configure.ac: Add --enable-default-compressed-debug-sections-algorithm.
	* configure: Regenerate.

gas uses ZSTD_compressStream2 which is only available with libzstd >=
1.4.0, leading to build errors when an older version is installed.

This patch updates the check libzstd presence to check its version is
>= 1.4.0. However, since gas seems to be the only component requiring
such a recent version this may imply that we disable ZSTD support for
all components although some would still benefit from an older
version.

I ran 'autoreconf -f' in all directories containing a configure.ac
file, using vanilla autoconf-2.69 and automake-1.15.1. I noticed
several errors from autoheader in readline, as well as warnings in
intl, but they are unrelated to this patch.

This should fix some of the buildbots.

OK for trunk?

Thanks,

Christophe

config/ChangeLog:

	* zstd.m4: Add minimum version requirement of 1.4.0.

PR29397 PR29563: Add new configure option --with-zstd which defaults to
auto.  If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support
zstd compressed debug sections for most tools.

* bfd: for addr2line, objdump --dwarf, gdb, etc
* gas: support --compress-debug-sections=zstd
* ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd
* objcopy: support ELFCOMPRESS_ZSTD input for
  --decompress-debug-sections and --compress-debug-sections=zstd
* gdb: support ELFCOMPRESS_ZSTD input.  The bfd change references zstd
  symbols, so gdb has to link against -lzstd in this patch.

If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error.  We
can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this
is too heavyweight, so don't do it for now.

```
% ld/ld-new a.o
ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...

% ld/ld-new a.o --compress-debug-sections=zstd
ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support

% binutils/objcopy --compress-debug-sections=zstd a.o b.o
binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support

% binutils/objcopy b.o --decompress-debug-sections
binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
```

config/ChangeLog:

	* zstd.m4: New file.

ChangeLog:
	* configure: Regenerate.
	* configure.ac: Add --with-zstd.

These are still supported in Binutils.

ChangeLog:

	* configure: Regenerate.
	* configure.ac: Recover tilegx/tilepro targets.

AR from older binutils doesn't work with --plugin and rc:

[hjl@gnu-cfl-2 bin]$ touch foo.c
[hjl@gnu-cfl-2 bin]$ ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c
[hjl@gnu-cfl-2 bin]$ ./ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c
./ar: no operation specified
[hjl@gnu-cfl-2 bin]$ ./ar --version
GNU ar (Linux/GNU Binutils) 2.29.51.0.1.20180112
Copyright (C) 2018 Free Software Foundation, Inc.
This program is free software; you may redistribute it under the terms of
the GNU General Public License version 3 or (at your option) any later version.
This program has absolutely no warranty.
[hjl@gnu-cfl-2 bin]$

Check if AR works with --plugin and rc before passing --plugin to AR and
RANLIB.

ChangeLog:

	* configure: Regenerated.
	* libtool.m4 (_LT_CMD_OLD_ARCHIVE): Check if AR works with
	--plugin and rc before enabling --plugin.

config/ChangeLog:

	* gcc-plugin.m4 (GCC_PLUGIN_OPTION): Check if AR works with
	--plugin and rc before enabling --plugin.

gcc/ChangeLog:

	* configure: Regenerate.

libatomic/ChangeLog:

	* configure: Regenerate.

libbacktrace/ChangeLog:

	* configure: Regenerate.

libcc1/ChangeLog:

	* configure: Regenerate.

libffi/ChangeLog:

	* configure: Regenerate.

libgfortran/ChangeLog:

	* configure: Regenerate.

libgm2/ChangeLog:

	* configure: Regenerate.

libgomp/ChangeLog:

	* configure: Regenerate.

libiberty/ChangeLog:

	* configure: Regenerate.

libitm/ChangeLog:

	* configure: Regenerate.

libobjc/ChangeLog:

	* configure: Regenerate.

libphobos/ChangeLog:

	* configure: Regenerate.

libquadmath/ChangeLog:

	* configure: Regenerate.

libsanitizer/ChangeLog:

	* configure: Regenerate.

libssp/ChangeLog:

	* configure: Regenerate.

libstdc++-v3/ChangeLog:

	* configure: Regenerate.

libvtv/ChangeLog:

	* configure: Regenerate.

lto-plugin/ChangeLog:

	* configure: Regenerate.

zlib/ChangeLog:

	* configure: Regenerate.

Sync with binutils for building binutils with LTO:

50ad1254d50 GCC: Pass --plugin to AR and RANLIB

Detect GCC LTO plugin.  Pass --plugin to AR and RANLIB to support LTO
build.

ChangeLog:

	* Makefile.tpl (AR): Add @AR_PLUGIN_OPTION@
	(RANLIB): Add @RANLIB_PLUGIN_OPTION@.
	* configure.ac: Include config/gcc-plugin.m4.
	AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION.
	* libtool.m4 (_LT_CMD_OLD_ARCHIVE): Pass --plugin to AR and
	RANLIB if possible.
	* Makefile.in: Regenerated.
	* configure: Likewise.

config/ChangeLog:

	* gcc-plugin.m4 (GCC_PLUGIN_OPTION): New.

libiberty/ChangeLog:

	* Makefile.in (AR): Add @AR_PLUGIN_OPTION@
	(RANLIB): Add @RANLIB_PLUGIN_OPTION@.
	(configure_deps): Depend on ../config/gcc-plugin.m4.
	* configure.ac: AC_SUBST AR_PLUGIN_OPTION and
	RANLIB_PLUGIN_OPTION.
	* aclocal.m4: Regenerated.
	* configure: Likewise.

zlib/ChangeLog:

	* configure: Regenerated.

gcc/ChangeLog:

	* configure: Regenerate.

libatomic/ChangeLog:

	* configure: Regenerate.

libbacktrace/ChangeLog:

	* configure: Regenerate.

libcc1/ChangeLog:

	* configure: Regenerate.

libffi/ChangeLog:

	* configure: Regenerate.

libgfortran/ChangeLog:

	* configure: Regenerate.

libgm2/ChangeLog:

	* configure: Regenerate.

libgomp/ChangeLog:

	* configure: Regenerate.

libitm/ChangeLog:

	* configure: Regenerate.

libobjc/ChangeLog:

	* configure: Regenerate.

libphobos/ChangeLog:

	* configure: Regenerate.

libquadmath/ChangeLog:

	* configure: Regenerate.

libsanitizer/ChangeLog:

	* configure: Regenerate.

libssp/ChangeLog:

	* configure: Regenerate.

libstdc++-v3/ChangeLog:

	* configure: Regenerate.

libvtv/ChangeLog:

	* configure: Regenerate.

lto-plugin/ChangeLog:

	* configure: Regenerate.

Trying to build binutils with an older gcc currently fails.  Working
around these gcc bugs is not onerous so let's fix them.

include/ChangeLog:

	* xtensa-dynconfig.h (xtensa_isa_internal): Delete unnecessary
	forward declaration.

Found when attempting to build binutils on sparc sunos-5.8 where
sys/byteorder.h defines _BIG_ENDIAN but not any of the BYTE_ORDER
variants.  This patch adds the extra tests to cope with the old
machine, and tidies the header a little.

include/ChangeLog:

	* plugin-api.h: When handling non-gcc or gcc < 4.6.0 include
	necessary header files before testing macros.  Make more use
	of #elif.  Test _LITTLE_ENDIAN and _BIG_ENDIAN in final tests.

r14-2875-g1ed21e23d6d4da ("Use substituted GDCFLAGS") already
implemented this change, but only on the generated file rather than in
the template it is generated from.

ChangeLog:

	* Makefile.tpl: Substitute @GDCFLAGS@ instead of using
	$(CFLAGS).

This test is too aggressive.  Constants have VOIDmode, so we need to let the
through this phase of conditional move support.

Fixes several missed conditional moves with the trunk.

gcc/
	* config/riscv/riscv.cc (riscv_expand_conditional_move): Allow
	VOIDmode operands to conditional before canonicalization.

The stack pointer propagation fix 736f8fd3 turned out to be more
restrictive than needed by rejecting propagation of the stack pointer
when REG_POINTER didn't match.

This commit removes this check:
  When the stack pointer is propagated it is fine for this to result in
  REG_POINTER becoming true from false, which is what the original code
  checked.

This simplification makes the previously introduced function
maybe_copy_reg_attrs obsolete and the logic can be inlined at the call
sites, as it was before 736f8fd3.

gcc/ChangeLog:

	* regcprop.cc (maybe_copy_reg_attrs): Remove unnecessary function.
	(find_oldest_value_reg): Inline stack_pointer_rtx check.
	(copyprop_hardreg_forward_1): Inline stack_pointer_rtx check.

ChangeLog:

	* MAINTAINERS: Add the BPF port to my reviewer listing.

When IPA-SRA detects whether a parameter passed by reference is
written to, it does not special case CLOBBERs which means it often
bails out unnecessarily, especially when dealing with C++ destructors.
Fixed by the obvious continue in the two relevant loops and by adding
a simple function that marks the clobbers in the transformation code
as statements to be removed.

gcc/ChangeLog:

2023-08-04  Martin Jambor  <mjambor@suse.cz>

	PR ipa/110378
	* ipa-param-manipulation.h (class ipa_param_body_adjustments): New
	members get_ddef_if_exists_and_is_used and mark_clobbers_dead.
	* ipa-sra.cc (isra_track_scalar_value_uses): Ignore clobbers.
	(ptr_parm_has_nonarg_uses): Likewise.
	* ipa-param-manipulation.cc
	(ipa_param_body_adjustments::get_ddef_if_exists_and_is_used): New.
	(ipa_param_body_adjustments::mark_dead_statements): Move initial
	checks to get_ddef_if_exists_and_is_used.
	(ipa_param_body_adjustments::mark_clobbers_dead): New.
	(ipa_param_body_adjustments::common_initialization): Call
	mark_clobbers_dead when splitting.

gcc/testsuite/ChangeLog:

2023-07-31  Martin Jambor  <mjambor@suse.cz>

	PR ipa/110378
	* g++.dg/ipa/pr110378-1.C: New test.

As I've mentioned in the main zicond thread, Ventana has had patches
that support more cases by first emitting a suitable scc instruction
essentially as a canonicalization step of the condition for zicond.

For example if we have

(set (target) (if_then_else (op (reg1) (reg2))
                            (true_value)
                            (false_value)))

The two register comparison isn't handled by zicond directly.  But we
can generate something like this instead

(set (temp) (op (reg1) (reg2)))
(set (target) (if_then_else (op (temp) (const_int 0))
                            (true_value)
                            (false_value)

Then let the remaining code from Xiao handle the true_value/false_value
to make sure it's zicond compatible.

This is primarily Raphael's work.  My involvement has been mostly to
move it from its original location (in the .md file) into the expander
function and fix minor problems with the FP case.

gcc/
	* config/riscv/riscv.cc (riscv_expand_int_scc): Add invert_ptr
	as an argument and pass it to riscv_emit_int_order_test.
	(riscv_expand_conditional_move): Handle cases where the condition
	is not EQ/NE or the second argument to the conditional is not
	(const_int 0).
	* config/riscv/riscv-protos.h (riscv_expand_int_scc): Update prototype.

Co-authored-by: Jeff Law <jlaw@ventanamicro.com>

I noticed while looking into some code generation of bitmap_single_bit_set_p,
that sometimes:
```
  if (uns > 1)
    return 0;
  return uns == 1;
```
Would not optimize down to just:
```
return uns == 1;
```

In this case, VRP likes to change `a == 1` into `(bool)a` if
a has a range of [0,1] due to `a <= 1` side of the branch.
We might end up with this similar code even without VRP,
in the case of builtin-sprintf-warn-23.c (and Wrestrict.c), we had:
```
if (s < 0 || 1 < s)
  s = 0;
```
Which is the same as `s = ((unsigned)s) <= 1 ? s : 0`;
So we should be able to catch that also.

This adds 2 patterns to catch `(uns <= 1) & uns` and
`(uns > 1) ? 0 : uns` and convert those into:
`(convert) uns == 1`.

OK? Bootstrapped and tested on x86_64-linux-gnu with no regressions.

	PR tree-optimization/109959

gcc/ChangeLog:

	* match.pd (`(a > 1) ? 0 : (cast)a`, `(a <= 1) & (cast)a`):
	New patterns.

gcc/testsuite/ChangeLog:

	* gcc.dg/tree-ssa/builtin-sprintf-warn-23.c: Remove xfail.
	* c-c++-common/Wrestrict.c: Update test and remove some xfail.
	* gcc.dg/tree-ssa/cmpeq-1.c: New test.
	* gcc.dg/tree-ssa/cmpeq-2.c: New test.
	* gcc.dg/tree-ssa/cmpeq-3.c: New test.

The following makes us use RPO order instead of walking post-dominators.
This ensures we visit a block before any predecessors.  I've seen
some extra sinking because of this in a larger testcase but failed
to reduce a smaller one (processing of post-dominator sons is unordered
so I failed to have "luck").

	* tree-ssa-sink.cc (pass_sink_code::execute): Do not
	calculate post-dominators.  Calculate RPO on the inverted
	graph and process blocks in that order.

/var/tmp/portage/sys-devel/gcc-14.0.0_pre20230806/work/gcc-14-20230806/libgfortran/generated/matmul_i1.c: In function ‘matmul_i1_avx512f’:
/var/tmp/portage/sys-devel/gcc-14.0.0_pre20230806/work/gcc-14-20230806/libgfortran/generated/matmul_i1.c:1781:1: internal compiler error: RTL check: expected elt 0 type 'i' or 'n', have 'w' (rtx const_int) in vpternlog_redundant_operand_mask, at config/i386/i386.cc:19460
 1781 | }
      | ^
0x5559de26dc2d rtl_check_failed_type2(rtx_def const*, int, int, int, char const*, int, char const*)
        /var/tmp/portage/sys-devel/gcc-14.0.0_pre20230806/work/gcc-14-20230806/gcc/rtl.cc:761
0x5559de340bfe vpternlog_redundant_operand_mask(rtx_def**)
        /var/tmp/portage/sys-devel/gcc-14.0.0_pre20230806/work/gcc-14-20230806/gcc/config/i386/i386.cc:19460
0x5559dfec67a6 split_44
        /var/tmp/portage/sys-devel/gcc-14.0.0_pre20230806/work/gcc-14-20230806/gcc/config/i386/sse.md:12730
0x5559dfec67a6 split_63
        /var/tmp/portage/sys-devel/gcc-14.0.0_pre20230806/work/gcc-14-20230806/gcc/config/i386/sse.md:28428
0x5559deb8a682 try_split(rtx_def*, rtx_insn*, int)
        /var/tmp/portage/sys-devel/gcc-14.0.0_pre20230806/work/gcc-14-20230806/gcc/emit-rtl.cc:3800
0x5559deb8adf2 try_split(rtx_def*, rtx_insn*, int)
        /var/tmp/portage/sys-devel/gcc-14.0.0_pre20230806/work/gcc-14-20230806/gcc/emit-rtl.cc:3972
0x5559def69194 split_insn
        /var/tmp/portage/sys-devel/gcc-14.0.0_pre20230806/work/gcc-14-20230806/gcc/recog.cc:3385
0x5559def70c57 split_all_insns()
        /var/tmp/portage/sys-devel/gcc-14.0.0_pre20230806/work/gcc-14-20230806/gcc/recog.cc:3489
0x5559def70d0c execute
        /var/tmp/portage/sys-devel/gcc-14.0.0_pre20230806/work/gcc-14-20230806/gcc/recog.cc:4413

Use INTVAL (imm_op) instead of XINT (imm_op, 0).

gcc/ChangeLog:

	PR target/110926
	* config/i386/i386-protos.h
	(vpternlog_redundant_operand_mask): Adjust parameter type.
	* config/i386/i386.cc (vpternlog_redundant_operand_mask): Use
	INTVAL instead of XINT, also adjust parameter type from rtx*
	to rtx since the function only needs operands[4] in vpternlog
	pattern.
	(substitute_vpternlog_operands): Pass operands[4] instead of
	operands to vpternlog_redundant_operand_mask.
	* config/i386/sse.md: Ditto.

We currently dump notes like

flow_lam.f:65:72: optimized: basic block part vectorized using 32 byte vectors
flow_lam.f:65:72: optimized: basic block part vectorized using 32 byte vectors
flow_lam.f:65:72: optimized: basic block part vectorized using 32 byte vectors
flow_lam.f:65:72: optimized: basic block part vectorized using 32 byte vectors
..

repeating the same location for multiple instances because we
clobber vect_location during BB vectorization.  The following
avoids this, improving things to

flow_lam.f:15:72: optimized: basic block part vectorized using 32 byte vectors
flow_lam.f:16:72: optimized: basic block part vectorized using 32 byte vectors
flow_lam.f:17:72: optimized: basic block part vectorized using 32 byte vectors
flow_lam.f:18:72: optimized: basic block part vectorized using 32 byte vectors
...

	* tree-vect-slp.cc (vect_slp_region): Save/restore vect_location
	around dumping code.

Similar like r14-2786-gade30fad6669e5, the patch is for V4HF/V2HFmode.

gcc/ChangeLog:

	PR target/110762
	* config/i386/mmx.md (<insn><mode>3): Changed from define_insn
	to define_expand and break into ..
	(<insn>v4hf3): .. this.
	(divv4hf3): .. this.
	(<insn>v2hf3): .. this.
	(divv2hf3): .. this.
	(movd_v2hf_to_sse): New define_expand.
	(movq_<mode>_to_sse): Extend to V4HFmode.
	(mmxdoublevecmode): Ditto.
	(V2FI_V4HF): New mode iterator.
	* config/i386/sse.md (*vec_concatv4sf): Extend to hanlde V8HF
	by using mode iterator V4SF_V8HF, renamed to ..
	(*vec_concat<mode>): .. this.
	(*vec_concatv4sf_0): Extend to handle V8HF by using mode
	iterator V4SF_V8HF, renamed to ..
	(*vec_concat<mode>_0): .. this.
	(*vec_concatv8hf_movss): New define_insn.
	(V4SF_V8HF): New mode iterator.

gcc/testsuite/ChangeLog:

	* gcc.target/i386/pr110762-v4hf.c: New test.

Replace multiple returns by a single return statement with a conditional
expression. This is more readable and maintainable, and also conformant with
a Highly Recommended design principle of ISO 26262-6.

gcc/ada/

	* libgnat/s-parame__qnx.adb: Refactor multiple returns.

The existing precondition guarded against exception Dereference_Error,
but not against Constraint_Error.

The RM rule B.3.1(36/3) only mentions Constraint_Error for the Value
function which returns char_array, but the one which returns String
has the same restriction, because it is equivalent to calling the
variant which returns char_array and then converted.

gcc/ada/

	* libgnat/i-cstrin.ads (Value): Extend preconditions; adapt comment for
	the package.

When a function is called in a predicate, it was not properly detected
as not always inlined in GNATprove mode, which led to crashes later during
analysis. Fixed now.

gcc/ada/

	* sem_res.adb (Resolve_Call): Always call Cannot_Inline so that
	subprogram called is marked as not always inlined.

The compiler reports an spurious error when a class-wide precondition
expression has a class-wide type conversion.

gcc/ada/

	* sem_res.adb (Resolve_Type_Conversion): Do not warn on conversion
	to class-wide type on internally build helpers of class-wide
	preconditions.

Consider this following case:

#include <stdint.h>

#define TEST2_TYPE(TYPE)					\
  __attribute__((noipa))					\
  void vshiftr_##TYPE (TYPE *__restrict dst, TYPE *__restrict a, TYPE *__restrict b, int n)	\
  {								\
    for (int i = 0; i < n; i++)					\
      dst[i] = (a[i]) >> b[i];					\
  }

#define TEST_ALL()	\
 TEST2_TYPE(uint8_t)	\
 TEST2_TYPE(uint16_t)	\
 TEST2_TYPE(uint32_t)	\
 TEST2_TYPE(uint64_t)	\

TEST_ALL()

Both RISC-V and aarch64 of trunk GCC failed vectorize uint8_t/uint16_t with following missed report:

<source>:17:1: missed: couldn't vectorize loop
<source>:17:1: missed: not vectorized: relevant stmt not supported: patt_46 = MIN_EXPR <_6, 7>;
<source>:17:1: missed: couldn't vectorize loop
<source>:17:1: missed: not vectorized: relevant stmt not supported: patt_47 = MIN_EXPR <_7, 15>;
Compiler returned: 0

Both GCC 13.1 can vectorize, see:

https://godbolt.org/z/6vaMK5M1o

Bootstrap and regression on X86 passed.

Ok for trunk ?

gcc/ChangeLog:

	* tree-vect-patterns.cc (vect_recog_over_widening_pattern): Add op vectype.

gcc/testsuite/ChangeLog:

	* gcc.target/riscv/rvv/autovec/binop/narrow-1.c: Adapt testcase.

The attribute defaults to 1 for TI-mode insns of type sselog, sselog1,
sseiadd, sseimul, and sseishft.

In *<code>v8hi3 [smaxmin] and *<code>v16qi3 [umaxmin] also drop the
similarly stray "prefix_extra" at this occasion. These two max/min
flavors are encoded in 0f space.

gcc/

	* config/i386/mmx.md (*mmx_pinsrd): Drop "prefix_data16".
	(*mmx_pinsrb): Likewise.
	(*mmx_pextrb): Likewise.
	(*mmx_pextrb_zext): Likewise.
	(mmx_pshufbv8qi3): Likewise.
	(mmx_pshufbv4qi3): Likewise.
	(mmx_pswapdv2si2): Likewise.
	(*pinsrb): Likewise.
	(*pextrb): Likewise.
	(*pextrb_zext): Likewise.
	* config/i386/sse.md (*sse4_1_mulv2siv2di3<mask_name>): Likewise.
	(*sse2_eq<mode>3): Likewise.
	(*sse2_gt<mode>3): Likewise.
	(<sse2p4_1>_pinsr<ssemodesuffix>): Likewise.
	(*vec_extract<mode>): Likewise.
	(*vec_extract<PEXTR_MODE12:mode>_zext): Likewise.
	(*vec_extractv16qi_zext): Likewise.
	(ssse3_ph<plusminus_mnemonic>wv8hi3): Likewise.
	(ssse3_pmaddubsw128): Likewise.
	(*<ssse3_avx2>_pmulhrsw<mode>3<mask_name>): Likewise.
	(<ssse3_avx2>_pshufb<mode>3<mask_name>): Likewise.
	(<ssse3_avx2>_psign<mode>3): Likewise.
	(<ssse3_avx2>_palignr<mode>): Likewise.
	(*abs<mode>2): Likewise.
	(sse4_2_pcmpestr): Likewise.
	(sse4_2_pcmpestri): Likewise.
	(sse4_2_pcmpestrm): Likewise.
	(sse4_2_pcmpestr_cconly): Likewise.
	(sse4_2_pcmpistr): Likewise.
	(sse4_2_pcmpistri): Likewise.
	(sse4_2_pcmpistrm): Likewise.
	(sse4_2_pcmpistr_cconly): Likewise.
	(vgf2p8affineinvqb_<mode><mask_name>): Likewise.
	(vgf2p8affineqb_<mode><mask_name>): Likewise.
	(vgf2p8mulb_<mode><mask_name>): Likewise.
	(*<code>v8hi3 [smaxmin]): Drop "prefix_data16" and
	"prefix_extra".
	(*<code>v16qi3 [umaxmin]): Likewise.

When first added explicitly in 3ddffba9 ("i386.md
(sse4_1_round<mode>2): Add avx512f alternative"), "*" should not have
been used for the pre-existing alternative. The attribute was plain
missing. Subsequent changes adding more alternatives then generously
extended the bogus pattern.

Apparently something similar happened to the two mmx_pblendvb_* insns.

gcc/

	* config/i386/i386.md (sse4_1_round<mode>2): Make
	"length_immediate" uniformly 1.
	* config/i386/mmx.md (mmx_pblendvb_v8qi): Likewise.
	(mmx_pblendvb_<mode>): Likewise.

gcc/

	* config/i386/sse.md
	(<avx512>_<complexopname>_<mode><maskc_name><round_name>): Add
	"prefix" attribute.
	(avx512fp16_<complexopname>sh_v8hf<mask_scalarc_name><round_scalarcz_name>):
	Likewise.

Many were lacking "prefix" and "prefix_extra", some had a bogus value of
2 for "prefix_extra" (presumably inherited from their SSE5 counterparts,
which are long gone) and a meaningless "prefix_data16" one. Where
missing, "mode" attributes are also added. (Note that "sse4arg" and
"ssemuladd" ones don't need further adjustment in this regard.)

gcc/

	* config/i386/sse.md (xop_phadd<u>bw): Add "prefix",
	"prefix_extra", and "mode" attributes.
	(xop_phadd<u>bd): Likewise.
	(xop_phadd<u>bq): Likewise.
	(xop_phadd<u>wd): Likewise.
	(xop_phadd<u>wq): Likewise.
	(xop_phadd<u>dq): Likewise.
	(xop_phsubbw): Likewise.
	(xop_phsubwd): Likewise.
	(xop_phsubdq): Likewise.
	(xop_rotl<mode>3): Add "prefix" and "prefix_extra" attributes.
	(xop_rotr<mode>3): Likewise.
	(xop_frcz<mode>2): Likewise.
	(*xop_vmfrcz<mode>2): Likewise.
	(xop_vrotl<mode>3): Add "prefix" attribute. Change
	"prefix_extra" to 1.
	(xop_sha<mode>3): Likewise.
	(xop_shl<mode>3): Likewise.

While the attribute is relevant for legacy- and VEX-encoded insns, it is
of no relevance for EVEX-encoded ones.

While there in <mask_codefor>avx512dq_broadcast<mode><mask_name>_1 add
the missing "length_immediate".

gcc/

	* config/i386/sse.md
	(*<avx512>_eq<mode>3<mask_scalar_merge_name>_1): Drop
	"prefix_extra".
	(avx512dq_vextract<shuffletype>64x2_1_mask): Likewise.
	(*avx512dq_vextract<shuffletype>64x2_1): Likewise.
	(avx512f_vextract<shuffletype>32x4_1_mask): Likewise.
	(*avx512f_vextract<shuffletype>32x4_1): Likewise.
	(vec_extract_lo_<mode>_mask [AVX512 forms]): Likewise.
	(vec_extract_lo_<mode> [AVX512 forms]): Likewise.
	(vec_extract_hi_<mode>_mask [AVX512 forms]): Likewise.
	(vec_extract_hi_<mode> [AVX512 forms]): Likewise.
	(@vec_extract_lo_<mode> [AVX512 forms]): Likewise.
	(@vec_extract_hi_<mode> [AVX512 forms]): Likewise.
	(vec_extract_lo_v64qi): Likewise.
	(vec_extract_hi_v64qi): Likewise.
	(*vec_widen_umult_even_v16si<mask_name>): Likewise.
	(*vec_widen_smult_even_v16si<mask_name>): Likewise.
	(*avx512f_<code><mode>3<mask_name>): Likewise.
	(*vec_extractv4ti): Likewise.
	(avx512bw_<code>v32qiv32hi2<mask_name>): Likewise.
	(<mask_codefor>avx512dq_broadcast<mode><mask_name>_1): Likewise.
	Add "length_immediate".

In the rdrand and rdseed cases "prefix_0f" is meant instead. For
mmx_floatv2siv2sf2 1 is correct only for the first alternative. For
the integer min/max cases 1 uniformly applies to legacy and VEX
encodings (the UB and SW variants are dealt with separately anyway).
Same for {,V}MOVNTDQA.

Unlike {,V}PEXTRW, which has two encoding forms, {,V}PINSRW only has
a single form in 0f space. (In *vec_extract<mode> note that the
dropped part if the condition also referenced non-existing alternative
2.)

Of the integer compare insns, only the 64-bit element forms are encoded
in 0f38 space.

gcc/

	* config/i386/i386.md (@rdrand<mode>): Add "prefix_0f". Drop
	"prefix_extra".
	(@rdseed<mode>): Likewise.
	* config/i386/mmx.md (<code><mode>3 [smaxmin and umaxmin cases]):
	Adjust "prefix_extra".
	* config/i386/sse.md (@vec_set<mode>_0): Likewise.
	(*sse4_1_<code><mode>3<mask_name>): Likewise.
	(*avx2_eq<mode>3): Likewise.
	(avx2_gt<mode>3): Likewise.
	(<sse2p4_1>_pinsr<ssemodesuffix>): Likewise.
	(*vec_extract<mode>): Likewise.
	(<vi8_sse4_1_avx2_avx512>_movntdqa): Likewise.

In the three remaining instances separate "prefix_0f" and "prefix_rep"
are what is wanted instead.

gcc/

	* config/i386/i386.md (rd<fsgs>base<mode>): Add "prefix_0f" and
	"prefix_rep". Drop "prefix_extra".
	(wr<fsgs>base<mode>): Likewise.
	(ptwrite<mode>): Likewise.

They're all VEX3- (also covering XOP) or EVEX-encoded. Express that in
the default calculation of "prefix". FMA4 insns also all have a 1-byte
immediate operand.

Where the default calculation is not sufficient / applicable, add
explicit "prefix" attributes. While there also add a "mode" attribute to
fma_<complexpairopname>_<mode>_pair.

gcc/

	* config/i386/i386.md (isa): Move up.
	(length_immediate): Handle "fma4".
	(prefix): Handle "ssemuladd".
	* config/i386/sse.md (*fma_fmadd_<mode>): Add "prefix" attribute.
	(<sd_mask_codefor>fma_fmadd_<mode><sd_maskz_name><round_name>):
	Likewise.
	(<avx512>_fmadd_<mode>_mask<round_name>): Likewise.
	(<avx512>_fmadd_<mode>_mask3<round_name>): Likewise.
	(<sd_mask_codefor>fma_fmsub_<mode><sd_maskz_name><round_name>):
	Likewise.
	(<avx512>_fmsub_<mode>_mask<round_name>): Likewise.
	(<avx512>_fmsub_<mode>_mask3<round_name>): Likewise.
	(*fma_fnmadd_<mode>): Likewise.
	(<sd_mask_codefor>fma_fnmadd_<mode><sd_maskz_name><round_name>):
	Likewise.
	(<avx512>_fnmadd_<mode>_mask<round_name>): Likewise.
	(<avx512>_fnmadd_<mode>_mask3<round_name>): Likewise.
	(<sd_mask_codefor>fma_fnmsub_<mode><sd_maskz_name><round_name>):
	Likewise.
	(<avx512>_fnmsub_<mode>_mask<round_name>): Likewise.
	(<avx512>_fnmsub_<mode>_mask3<round_name>): Likewise.
	(<sd_mask_codefor>fma_fmaddsub_<mode><sd_maskz_name><round_name>):
	Likewise.
	(<avx512>_fmaddsub_<mode>_mask<round_name>): Likewise.
	(<avx512>_fmaddsub_<mode>_mask3<round_name>): Likewise.
	(<sd_mask_codefor>fma_fmsubadd_<mode><sd_maskz_name><round_name>):
	Likewise.
	(<avx512>_fmsubadd_<mode>_mask<round_name>): Likewise.
	(<avx512>_fmsubadd_<mode>_mask3<round_name>): Likewise.
	(*fmai_fmadd_<mode>): Likewise.
	(*fmai_fmsub_<mode>): Likewise.
	(*fmai_fnmadd_<mode><round_name>): Likewise.
	(*fmai_fnmsub_<mode><round_name>): Likewise.
	(avx512f_vmfmadd_<mode>_mask<round_name>): Likewise.
	(avx512f_vmfmadd_<mode>_mask3<round_name>): Likewise.
	(avx512f_vmfmadd_<mode>_maskz_1<round_name>): Likewise.
	(*avx512f_vmfmsub_<mode>_mask<round_name>): Likewise.
	(avx512f_vmfmsub_<mode>_mask3<round_name>): Likewise.
	(*avx512f_vmfmsub_<mode>_maskz_1<round_name>): Likewise.
	(avx512f_vmfnmadd_<mode>_mask<round_name>): Likewise.
	(avx512f_vmfnmadd_<mode>_mask3<round_name>): Likewise.
	(avx512f_vmfnmadd_<mode>_maskz_1<round_name>): Likewise.
	(*avx512f_vmfnmsub_<mode>_mask<round_name>): Likewise.
	(*avx512f_vmfnmsub_<mode>_mask3<round_name>): Likewise.
	(*avx512f_vmfnmsub_<mode>_maskz_1<round_name>): Likewise.
	(*fma4i_vmfmadd_<mode>): Likewise.
	(*fma4i_vmfmsub_<mode>): Likewise.
	(*fma4i_vmfnmadd_<mode>): Likewise.
	(*fma4i_vmfnmsub_<mode>): Likewise.
	(fma_<complexopname>_<mode><sdc_maskz_name><round_name>): Likewise.
	(<avx512>_<complexopname>_<mode>_mask<round_name>): Likewise.
	(avx512fp16_fma_<complexopname>sh_v8hf<mask_scalarcz_name><round_scalarcz_name>):
	Likewise.
	(avx512fp16_<complexopname>sh_v8hf_mask<round_name>): Likewise.
	(xop_p<macs><ssemodesuffix><ssemodesuffix>): Likewise.
	(xop_p<macs>dql): Likewise.
	(xop_p<macs>dqh): Likewise.
	(xop_p<macs>wd): Likewise.
	(xop_p<madcs>wd): Likewise.
	(fma_<complexpairopname>_<mode>_pair): Likewise. Add "mode" attribute.

Record common properties in other attributes' default calculations:
There's always a 1-byte immediate, and they're always encoded in a VEX3-
like manner (note that "prefix_extra" already evaluates to 1 in this
case). The drop now (or already previously) redundant explicit
attributes, adding "mode" ones where they were missing.

Furthermore use "sse4arg" consistently for all VPCOM* insns; so far
signed comparisons did use it, while unsigned ones used "ssecmp". Note
that while they have (not counting the explicit or implicit immediate
operand) they really only have 3 operands, the operator is also counted
in those patterns. That's relevant for establishing the "memory"
attribute's value, and at the same time benign when there are only
register operands.

Note that despite also having 4 operands, multiply-add insns aren't
affected by this change, as they use "ssemuladd" for "type".

gcc/

	* config/i386/i386.md (length_immediate): Handle "sse4arg".
	(prefix): Likewise.
	(*xop_pcmov_<mode>): Add "mode" attribute.
	* config/i386/mmx.md (*xop_maskcmp<mode>3): Drop "prefix_data16",
	"prefix_rep", "prefix_extra", and "length_immediate" attributes.
	(*xop_maskcmp_uns<mode>3): Likewise. Switch "type" to "sse4arg".
	(*xop_pcmov_<mode>): Add "mode" attribute.
	* config/i386/sse.md (xop_pcmov_<mode><avxsizesuffix>): Add "mode"
	attribute.
	(xop_maskcmp<mode>3): Drop "prefix_data16", "prefix_rep",
	"prefix_extra", and "length_immediate" attributes.
	(xop_maskcmp_uns<mode>3): Likewise. Switch "type" to "sse4arg".
	(xop_maskcmp_uns2<mode>3): Drop "prefix_data16", "prefix_extra",
	and "length_immediate" attributes. Switch "type" to "sse4arg".
	(xop_pcom_tf<mode>3): Likewise.
	(xop_vpermil2<mode>3): Drop "length_immediate" attribute.

Drop SSE5 leftovers from both its comment and its default calculation.
A value of 2 simply cannot occur anymore. Instead extend the comment to
mention the use of the attribute in "length_vex", clarifying why
"prefix_extra" can actually be meaningful on VEX-encoded insns despite
those not having any real prefixes except possibly segment overrides.

gcc/

	* config/i386/i386.md (prefix_extra): Correct comment. Fold
	cases yielding 2 into ones yielding 1.

As detailed in LLVM Issue #57624
(https://github.com/llvm/llvm-project/issues/57624), a patch to
sanitizer_internal_defs.h broke SPARC stacktraces in the sanitizers.
The issue has now been fixed upstream (https://reviews.llvm.org/D156504)
and I'd like to cherry-pick that patch.

Bootstrapped without regressions on sparc-sun-solaris2.11.

2023-07-27  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	libsanitizer:
	* sanitizer_common/sanitizer_stacktrace_sparc.cpp,
	sanitizer_common/sanitizer_unwind_linux_libcdep.cpp: Cherry-pick
	llvm-project revision 679c076ae446af81eba81ce9b94203a273d4b88a.

If loop is ifconverted and later versioning by vectorizer, vectorizer will
reuse the scalar loop produced by ifconvert. Curiously enough it does not seem
to do so for versions produced by loop distribution while for loop distribution
this matters (since since both ldist versions survive to final code) while
after ifcvt it does not (since we remove non-vectorized path).

This patch fixes associated profile update.  Here it is necessary to scale both
arms of the conditional according to runtime checks inserted.  We got partly
right the loop body, but not the preheader block and block after exit.  The
first is particularly bad since it changes loop iterations estimates.

So we now turn 4 original loops:
  loop 1: iterations by profile: 473.497707 (reliable) entry count:84821 (precise, freq 0.9979)
  loop 2: iterations by profile: 100.000000 (reliable) entry count:39848881 (precise, freq 468.8104)
  loop 3: iterations by profile: 100.000000 (reliable) entry count:39848881 (precise, freq 468.8104)
  loop 4: iterations by profile: 100.999596 (reliable) entry count:84167 (precise, freq 0.9902)

Into following loops
  iterations by profile: 5.312499 (unreliable, maybe flat) entry count:12742188 (guessed, freq 149.9081)
     vectorized and split loop 1, peeled
  iterations by profile: 0.009496 (unreliable, maybe flat) entry count:374798 (guessed, freq 4.4094)
     split loop 1 (last iteration), peeled
  iterations by profile: 100.000008 (unreliable) entry count:3945039 (guessed, freq 46.4122)
     scalar version of loop 1
  iterations by profile: 100.000007 (unreliable) entry count:7101070 (guessed, freq 83.5420)
     redundant scalar version of loop 1 which we could eliminate if vectorizer understood ldist
  iterations by profile: 100.000000 (unreliable) entry count:35505353 (guessed, freq 417.7100)
     unvectorized loop 2
  iterations by profile: 5.312500 (unreliable) entry count:25563855 (guessed, freq 300.7512)
     vectorized loop 2, not peeled (hits max-peel-insns)
  iterations by profile: 100.000007 (unreliable) entry count:7101070 (guessed, freq 83.5420)
     unvectorized loop 3
  iterations by profile: 5.312500 (unreliable) entry count:25563855 (guessed, freq 300.7512)
     vectorized loop 3, not peeled (hits max-peel-insns)
  iterations by profile: 473.497707 (reliable) entry count:84821 (precise, freq 0.9979)
     loop 1
  iterations by profile: 100.999596 (reliable) entry count:84167 (precise, freq 0.9902)
     loop 4

With this change we are on 0 profile erros on hmmer benchmark:

Pass dump id |dynamic mismatch          |overall                              |
             |in count                  |size            |time                |
172t ch_vect |            0             |      996       | 385812023346       |
173t ifcvt   |     71010686    +71010686|     1021  +2.5%| 468361969416 +21.4%|
174t vect    |    210830784   +139820098|     1497 +46.6%| 216073467874 -53.9%|
175t dce     |    210830784             |     1387  -7.3%| 205273170281  -5.0%|
176t pcom    |    210830784             |     1387       | 201722634966  -1.7%|
177t cunroll |            0   -210830784|     1443  +4.0%| 180441501289 -10.5%|
182t ivopts  |            0             |     1385  -4.0%| 136412345683 -24.4%|
183t lim     |            0             |     1389  +0.3%| 135093950836  -1.0%|
192t reassoc |            0             |     1381  -0.6%| 134778347700  -0.2%|
193t slsr    |            0             |     1380  -0.1%| 134738100330  -0.0%|
195t tracer  |            0             |     1521 +10.2%| 134738179146  +0.0%|
196t fre     |      2680654     +2680654|     1489  -2.1%| 134659672725  -0.1%|
198t dom     |      5361308     +2680654|     1473  -1.1%| 134449553658  -0.2%|
201t vrp     |      5361308             |     1474  +0.1%| 134489004050  +0.0%|
202t ccp     |      5361308             |     1472  -0.1%| 134440752274  -0.0%|
204t dse     |      5361308             |     1444  -1.9%| 133802300525  -0.5%|
206t forwprop|      5361308             |     1433  -0.8%| 133542828370  -0.2%|
207t sink    |      5361308             |     1431  -0.1%| 133542658728  -0.0%|
211t store-me|      5361308             |     1430  -0.1%| 133542573728  -0.0%|
212t cddce   |      5361308             |     1428  -0.1%| 133541776728  -0.0%|
258r expand  |      5361308             |----------------|--------------------|
260r into_cfg|      5361308             |     9334  -0.8%| 885820707913  -0.6%|
261r jump    |      5361308             |     9330  -0.0%| 885820367913  -0.0%|
265r fwprop1 |      5361308             |     9206  -1.3%| 876756504385  -1.0%|
267r rtl pre |      5361308             |     9210  +0.0%| 876914305953  +0.0%|
269r cprop   |      5361308             |     9202  -0.1%| 876756165101  -0.0%|
271r cse_loca|      5361308             |     9198  -0.0%| 876727760821  -0.0%|
272r ce1     |      5361308             |     9126  -0.8%| 875726815885  -0.1%|
276r loop2_in|      5361308             |     9167  +0.4%| 873573110570  -0.2%|
282r cprop   |      5361308             |     9095  -0.8%| 871937317262  -0.2%|
284r cse2    |      5361308             |     9091  -0.0%| 871936977978  -0.0%|
285r dse1    |      5361308             |     9067  -0.3%| 871437031602  -0.1%|
290r combine |      5361308             |     9071  +0.0%| 869206278202  -0.3%|
292r stv     |      5361308             |    17157 +89.1%| 2111071925708+142.9%|
295r bbpart  |      5361308             |    17161  +0.0%| 2111071925708       |
296r outof_cf|      5361308             |    17233  +0.4%| 2111655121000  +0.0%|
297r split1  |      5361308             |    17245  +0.1%| 2111656138852  +0.0%|
306r ira     |      5361308             |    19189 +11.3%| 2136098398308  +1.2%|
307r reload  |      5361308             |    12101 -36.9%| 981091222830 -54.1%|
309r postrelo|      5361308             |    12019  -0.7%| 978750345475  -0.2%|
310r gcse2   |      5361308             |    12027  +0.1%| 978329108320  -0.0%|
311r split2  |      5361308             |    12023  -0.0%| 978507631352  +0.0%|
312r ree     |      5361308             |    12027  +0.0%| 978505414244  -0.0%|
313r cmpelim |      5361308             |    11979  -0.4%| 977531601988  -0.1%|
314r pro_and_|      5361308             |    12091  +0.9%| 977541801988  +0.0%|
315r dse2    |      5361308             |    12091       | 977541801988       |
316r csa     |      5361308             |    12087  -0.0%| 977541461988  -0.0%|
317r jump2   |      5361308             |    12039  -0.4%| 977683176572  +0.0%|
318r compgoto|      5361308             |    12039       | 977683176572       |
320r peephole|      5361308             |    12047  +0.1%| 977362727612  -0.0%|
321r ce3     |      5361308             |    12047       | 977362727612       |
323r cprop_ha|      5361308             |    11907  -1.2%| 968751076676  -0.9%|
324r rtl_dce |      5361308             |    11903  -0.0%| 968593274820  -0.0%|
325r bbro    |      5361308             |    11883  -0.2%| 967964046644  -0.1%|

Bootstrapped/regtested x86_64-linux, plan to commit it tomorrow if there are no
complains.

gcc/ChangeLog:

	PR tree-optimization/106293
	* tree-vect-loop-manip.cc (vect_loop_versioning): Fix profile update.
	* tree-vect-loop.cc (vect_transform_loop): Likewise.

gcc/testsuite/ChangeLog:

	PR tree-optimization/106293
	* gcc.dg/vect/vect-cond-11.c: Check profile consistency.
	* gcc.dg/vect/vect-widen-mult-extern-1.c: Check profile consistency.

Since we already had the infrastructure to optimize
`(x == 0) && (x > y)` to false for integer types,
this extends the same to pointer types as indirectly
requested by PR 96695.

OK? Bootstrapped and tested on x86_64-linux-gnu with no regressions.

gcc/ChangeLog:

	PR tree-optimization/96695
	* match.pd (min_value, max_value): Extend to
	pointer types too.

gcc/testsuite/ChangeLog:

	PR tree-optimization/96695
	* gcc.dg/pr96695-1.c: New test.
	* gcc.dg/pr96695-10.c: New test.
	* gcc.dg/pr96695-11.c: New test.
	* gcc.dg/pr96695-12.c: New test.
	* gcc.dg/pr96695-2.c: New test.
	* gcc.dg/pr96695-3.c: New test.
	* gcc.dg/pr96695-4.c: New test.
	* gcc.dg/pr96695-5.c: New test.
	* gcc.dg/pr96695-6.c: New test.
	* gcc.dg/pr96695-7.c: New test.
	* gcc.dg/pr96695-8.c: New test.
	* gcc.dg/pr96695-9.c: New test.